Electrocatalytic oxidation and highly selective voltammetric determination of L-cysteine at the surface of a 1-[4-(ferrocenyl ethynyl)phenyl]-1-ethanone modified carbon paste electrode.

A carbon paste electrode (CPE) chemically modified with 1-[4-(ferrocenyl ethynyl)phenyl]-1-ethanone (4-FEPEMCPE) was employed to study the electrocatalytic oxidation of L-cysteine using cyclic voltammetry, differential pulse voltammetry and double potential step chronoamperometry as diagnostic techniques. The diffusion coefficient (D = 7.863 x 10(-6) cm2 s(-1)) of L-cysteine was also estimated using chronoamperometry. The electron-transfer coefficient, alpha (= 0.40), for L-cysteine at the surface of 4-FEPEMCPE was determined using cyclic voltammetry technique. It was found that under an optimum pH (= 7.00), the oxidation of L-cysteine at the surface of such an electrode occurred at a potential of about 350 mV less positive than that of an unmodified CPE. The catalytic oxidation peak currents represented a linear dependence on the L-cysteine concentration. Linear analytical curves were obtained in the ranges of 9.0 x 10(-5) - 4.9 x 10(-3) M and 2.0 x 10(-5) - 2.8 x 10(-3) M of L-cysteine with correlation coefficients of 0.9981 and 0.9982 in cyclic voltammetry and differential pulse voltammetry, respectively. The detection limits (2 sigma) were determined to be 9.9 x 10(-6) M and 5 x 10(-6) M with cyclic voltammetry and differential pulse voltammetry, respectively. The influences of twenty other amino acids, such as glutamine, L-glutamic acid, L-glysine, L-histidine, L-isoleucine, L-leucine, L-arginine hydrochloride, L-aspargine, L-aspartic acid, S-carboxy methyl-L-cysteine, L-methionine, L-phenyl alanine, L-proline, L-serine, L-threonine, L-cystine, cysteamine and gluthathione, on the current response of the sensor were examined. The obtained results did not show any influence on the analytical signal of L-cysteine by these amino acids (except for cysteamine). The method was also used for the selective determination of L-cysteine in patient-blood plasma and some pharmaceutical preparations by using standard addition method.     

Determination of liquiritigenin and isoliquiritigenin in Glycyrrhiza uralensis and its medicinal preparations by capillary electrophoresis with electrochemical detection

A simple, reliable, reproducible and sensitive method, based on capillary electrophoresis with electrochemical detection (ED), for the determination of liquiritigenin and isoliquiritigenin in Glycyrrhiza uralensis and its medicinal preparations was described. Operated in a wall-jet configuration, a 300 microm diameter carbon-disk electrode was used as the working electrode, which exhibits good responses at + 1000 mV (versus SCE) for the two analytes. Under the optimum conditions, the analytes were base-line separated within 8 min, and excellent linearity was obtained in the concentration range from 5.0 x 10(-4) to 1.0 x 10(-6) mol/l. The detection limit (S/N = 3) was 4.7 x 10(-7) and 2.9 x 10(-7) mol/l for liquiritigenin and isoliquiritigenin, respectively. This work provides a useful method for the analysis of traditional Chinese medicines.     

Absorption spectra of the 4f electron transitions of the praseodymium complex with 1-cyclopropyl-6-fluoro-1,4-dihydro-7-(4-ethyl-1-piperazinyl) -4-oxo-3-quinoline carboxylic acid hydrochloride and its analytical application.

The absorption spectra of the praseodymium complex with 1-cyclopropyl-6-fluoro-1,4-dihydro-7-(4-ethyl-1-piperazinyl)-4-oxo-3- quinoline carboxylic acid hydrochloride (NNFX) has been studied by normal and derivative spectrophotometry. The complex showed maximum absorption at 350 nm at pH 6.0. The stoichiometry of the Pr-NNFX complex was calculated by the molar ratio and continuous variation methods. The ratio of Pr to NNFX was 1:3. The absorption bands of the 4f electron transitions of the praseodymium complex with NNFX are enhanced markedly, especially the wavelength at 481 nm. Using the third-derivative spectrum, the calibration graph is linear over the range 2.5 x 10(-5)-3.5 x 10(-4) mol dm-3 for praseodymium. The detection limits (signal-to-noise ratio of 2) is 1.4 x 10(-6) mol dm-3. The relative standard deviation is 1.2% for 7.0 x 10(-5) mol dm-3 of praseodymium. A method for the direct determination of praseodymium in rare earth mixtures with good accuracy and selectivity is described.     

Amitriptyline-selective plastic membrane sensors and their pharmaceutical applications.

The construction and general performance characteristics of potentiometric amitriptyline-plastic membrane sensors, based on ion-pair complexes with triphenylstilbenylborate and tetra(2-chlorophenyl)borate, respectively, are described. Both electrodes show near-Nernstian responses over the range 1 x 10(-2)-7 x 10(-6) mol dm-3 with a detection limit of about 5 x 10(-6) mol dm-3. The electrodes proved useful in the determination of amitriptyline hydrochloride in pure drug substances and pharmaceutical preparations. They were also applied to the determination of content uniformity and dissolution rate of sugar-coated amitriptyline tablets. The physical processes were numerically simulated by typical equations.     

Determination of ascorbic acid in pharmaceuticals and urine by reverse flow injection.

Two reverse flow injection (FI) methods, using spectrophotometric detection, are proposed for the determination of ascorbic acid. Both methods are based on its reaction with the ethylenediaminetetraacetic acid-CoIII complex in a medium of 5% diethylamine. In the first method, using the peak-height FI technique, ascorbic acid is determined over the range from 2 x 10(-4) to 5 x 10(-3) mol dm-3 and in the second, using the peak-width FI method, the working range is extended (2 x 10(-3)-5 x 10(-2) mol dm-3). Both FI methods were applied to the determination of ascorbic acid in pharmaceuticals while the peak-height FI technique was also used to determine ascorbic acid in urine.     

Flow-injection successive determination of cysteine and cystine in pharmaceutical preparations

A flow-injection configuration is proposed for the individual determination of cysteine and cystine and for the mixtures of both analytes. The procedure is based on the inhibitory effect of cysteine on the oxidation of thiamine to thiochrome by mercury(II). Linear calibration graphs were obtained between 1.0 x 10(-5) and 1.0 x 10(-4)M, with a sampling rate of 22 samples/hr and relative standard deviation of 1.14%. The inclusion of a selecting valve in the configuration, to pump water or hydroxylamine, allows the successive determination of these two analytes. The applicability of the method to the determination of cysteine and cystine in pharmaceutical preparations was demonstrated by investigating the effect of potential interferences and by the analysis of commercial preparations.     

Determination of 25-hydroxyvitamin D3 in human serum by fluorescence labelling and high-performance liquid chromatography.

A method is described for the determination of 25-hydroxyvitamin D3 in human blood serum. The problems of sensitivity and selectivity encountered with previous techniques were avoided by the formation of a highly fluorescent Diels-Alder adduct following solid-phase extraction of the vitamin. After excess of reagent had been eliminated, quantification was achieved by high-performance liquid chromatography. The recovery of the vitamin from serum was 76.4 +/- 1.76%. The precision of the method was determined, and the relative standard deviations were 8.38% at a concentration of 47.0 x 10(-9) mol dm-3, 6.74% at a concentration of 99.8 x 10(-9) mol dm-3 and 3.79% at a concentration of 146.8 x 10(-9) mol dm-3. The detection limit for the adduct was 2.93 x 10(-14) mol injected, for a signal-to-noise ratio of 3:1, and serum concentrations of 0.25 x 10(-9) mol dm-3 could easily be quantified. No interference from endogenous or exogenous substances was observed.     

Determination of epinephrine, norepinephrine, dopamine and L-dopa in pharmaceuticals by a photokinetic method.

A study of the photochemical reaction of the Rose Bengal (RB)-ethylenediaminetetraacetic acid system in the presence of epinephrine, norepinephrine, dopamine and L-dopa is presented. The rate of photoreduction of RB is dramatically retarded by small amounts of these catecholamines, which have an inhibitory effect on the excited state of RB, which is the activator of the process. Optimum conditions for the determination of catecholamines in the range of concentration between 5 x 10(-6) and 1 x 10(-4) mol dm-3 are described. The proposed method has been applied with excellent results to the determination of catecholamines in pharmaceuticals.     

Construction and performance characteristics of new fentanyl-selective plastic membrane electrode.

The construction and performance characteristics of an ion-selective electrode for fentanyl-drug cation, based on an ion-pair complex with tetrakis[3,5-bis-(trifluoromethyl)phenyl]borate anion in a PVC matrix were studied. A linear response for 1 x 10(-5) mol dm-3 to 1 x 10(-2) mol dm-3 drug with a slope of 57.9 +/- 0.5 mV/decade was established. The optimum pH range was 2 to 6. The lower detection limit was 6.29 x 10(-6) mol dm-3 fentanyl citrate (2.1165 micrograms cm-3 fentanyl). There were negligible interferences from a number of inorganic cations, structural analogues, and some common drug additives in injections. The electrode proposed has been successfully applied to determine fentanyl citrate in injections. The results correlated well with those obtained by the United States Pharmacopoeia standard procedure.     

Electrochemiluminescent determination of L-cysteine with a flow-injection analysis system.

A flow-injection electrochemiluminescent method for L-cysteine determination has been developed based on its enhancement of the electrochemiluminecence of luminol at a glassy carbon electrode. This method is simple and sensitive for cysteine determination. Under the selected experimental parameters, the linear range for cysteine concentration was 1.0 x 10(-6) - 5.0 x 10(-5) mol/l, and the detection limit was 0.67 micromol/l (S/N = 3). The relative standard deviation for 11 measurements of 1.0 x 10(-5) mol/l cysteine was 4.5%. The proposed method has been applied to the detection of cysteine in pharmaceutical injections with satisfactory results.     

Study of the electrochemical behavior of mitoxantrone and its determination at a Co-C modified ultramicroelectrode

In 0.005 mol dm-3 Tris-0.05 mol dm-3 NaCl buffer solution (pH 7.10), the electrochemical behavior of mitoxantrone was studied by linear-sweep voltammetry and cyclic voltammetry at a Co-carbon fiber ion implantation modified ultramicroelectrode. A sensitive reduction peak was obtained. The peak potential was -0.798 V (vs. SCE), the peak current was proportional to the concentration of mitoxantrone over the range of 2.0 x 10(-7)-6.0 x 10(6) mol dm-3 and the detection limit was 4.2 x 10(-8) mol dm-3. This method was applied to the direct determination of mitoxantrone in urine. Recoveries were in the range 95.4-105.8%. The reduction process was quasi-reversible with absorptive characteristics at a Co-C ultramicroelectrode. According to Laviron's theory, the electrode reaction rate constant ks and the electron transfer alpha of mitoxantrone were 4.4 s-1 and 0.48, respectively. The composition and depth distribution of elements on the surface of the Co-C ultramicroelectrode were determined by Auger electron spectroscopy. The experiments showed that Co was implanted into the surface of the carbon fiber, and the Co-C ultramicroelectrode had good stability and reproducibility.     

极谱法测定铑的铑(III)-5-Br-TAMB-CPC配合物新体系及其作用机理的探讨

本文建立了利用Rh(III)-5-Br-TAMB-CP配合物吸附波体系测定铑的电化学分析方法。研究了该体系吸附波的性质及阳离子表面活性剂CPC在体系中的作用机理。该方法灵敏度高, 选择性好, 可用于催化剂中铑的测定。     

Highly sensitive spectrofluorimetric determination of L-cysteine based on inhibition of hemoglobin

A highly sensitive spectrofluorimetric method for the determination of L-cysteine based on its inhibitory action on hemoglobin (Hb) activity was developed. The optimal conditions were studied. A linear calibration graph was obtained over the range 2.00 x 10(-7)-1.50 x 10(-6) mol l(-1) for L-cysteine. The relative standard derivation was 1.30% at L-cysteine concentration of 8.00 x 10(-7) mol l(-1) (n=11). Further experimental results revealed that the inhibition of L-cysteine on this system was of the competitive type. The method was applied to determine L-cysteine in protein hydrolysate and cystine electrolyte samples with satisfactory results.     

Electrochemical behavior of thiamine on a self-assembled gold electrode and its square-wave voltammetric determination in pharmaceutical preparations.

The electrochemical behavior of thiamine on a self-assembled electrode of L-cysteine (Cys/SAM/Au) has been investigated and Cys/SAM/Au can be used to detect thiamine using square-wave voltammetry (SWV). At pH 11.40 Britton-Robinson buffer, thiamine exhibits a well-defined anodic peak on Cys/SAM/Au. Under the optimized conditions, the anodic peak current of SWV was linear with the content of thiamine in the range of 1.1 x 10(-8) - 2.2 x 10(-6) mol/L; the detection limit was 5.5 x 10(-9) mol/L. The method was successfully applied to the determination of thiamine in pharmaceutical preparations.     

Homogeneous liquid-liquid extraction method for the selective spectrofluorimetric determination of trace amounts of tryptophan

Twenty-one amino acids were derivatized with fluorescamine (FLA) under basic conditions (pH 9) and the extraction of the amino acid-FLA derivatives was investigated using a homogeneous liquid-liquid extraction with perfluorooctanoic acid (HPFOA) based on phase separation under strongly acidic conditions. Under the optimum concentration conditions for the reagents ([PFOA]T = 3 x 10(-3) mol dm-3, [acetone]T = 3 vol.%, [HCl]T = 1.8 mol dm-3), the concentration factor was approximately 1000-fold (i.e., 30 microliters of the sedimented liquid phase was produced from 33 ml of the homogeneous aqueous solution). The percentage extraction (E) was determined for the 21 amino acid-FLA derivatives; the value for the tryptophan (Trp)-FLA derivative was 80.9%, whereas the other derivatives were not almost extracted (E < 0.4%). The Trp-FLA derivative was selective for the extraction using the homogeneous liquid-liquid extraction method with HPFOA. After the sedimented liquid phase containing Trp-FLA has been placed on a polytetrafluoroethylene filter-paper, the fluorescence intensity was determined using a spectrofluorimeter with filter-paper as the solid-sample holder. The calibration graph of Trp was linear over the range 1.0 x 10(-8)-1.5 x 10(-6) mol dm-3. The relative standard deviation for the central value of the calibration graph was 4.5% (five determinations) and the detection limit (S/N = 3) was 8.9 x 10(-9) mol dm-3. When the proposed method was applied to the highly sensitive spectrofluorimetric determination of Trp in animalin-L syrup, the results were satisfactory.     

Flow injection fluorimetric determination of thiourea

A flow injection configuration for the fluorimetric determination of thiourea is proposed. The procedure is based on the rapid oxidation of thiourea by thallium(III) with concomitant formation of fluorescent thallium(I). Linear calibration graphs were obtained between 5 x 10(-7) and 1 x 10(-5)M, with a sampling rate of 90 samples/hr. The usefulness of the method was tested in the determination of thiourea in fruit juices and fruit peels.     

Determination of organic mercury species in soils by high-performance liquid chromatography with ultraviolet detection.

Reversed-phase high-performance liquid chromatography with ultraviolet detection was optimized for the simultaneous separation and quantification of nine organic mercury compounds: methyl-, ethyl-, phenyl-, methoxyethyl-, ethoxyethyl-, benzoic and tolylmercury, mersalylic acid and nitromersol. The nine compounds were successfully separated on octadecylsilane columns (200 x 3 mm i.d.) by gradient elution with a methanol-water mixture ranging from 30 to 50% v/v. The detection limits for the various compounds are in the range 7.0-95.1 micrograms dm-3. For the extraction of five organomercurials from spiked soils, eight different extraction solutions were tested to differentiate between the total content and the available/soluble fraction of the analytes. Ammonium acetate solutions (1 mol dm-3) and water proved to be suitable agents for the estimation of the available and soluble fractions of methyl-, ethyl-, benzoic, methoxyethyl- and ethoxyethylmercury. For the determination of the total content of methyl- and benzoic mercury in soils, solutions of potassium iodide (1 mol dm-3)-ascorbic acid (0.1 mol dm-3) and oxalic acid (1 mol dm-3) provided recoveries in the ranges 53-81%. None of the solutions tested is suitable for the extraction of ethyl-, methoxyethyl- and ethoxyethylmercury.     

Electrochemical determination of dopamine using a poly(2-picolinic acid) modified glassy carbon electrode

A poly(2-picolinic acid) chemically modified electrode (CME) for the determination of dopamine (DA) by cyclic voltammetry is described. Compared with a bare glassy carbon electrode, the CME exhibits a 200 mV shift of the oxidation potential of DA in the cathodic direction and a marked enhancement of the current response. In pH 7.0 buffer solution, a linear calibration graph is obtained over the range from 2.5 x 10(-7) to 1.0 x 10(-5) mol dm-3 with a correlation coefficient of 0.998. The detection limit is 3.0 x 10(-8) mol dm-3. The modified electrode eliminated efficiently the interference from ascorbic acid (AA) when present in a 150-fold concentration ratio. It also showed excellent stability and reproducibility.     

Quantification of dibromodimethylhydantoin disinfectants in water by chemiluminescent method.

Quantification of 1,3-dibromo-5,5-dimethylhydantoin (DBDMH) was studied by its chemiluminescence (CL) reaction with luminol in an alkaline medium. The stability of DBDMH, 1,3-dichloro-5,5-dimethylhydantoin (DCDMH) and 1-bromo-3-chloro-5,5-dimethylhydantoin (BCDMH) in water was initially assessed by its CL reaction capability. The results indicated that the hydrolysis process was critically dependent on the types of reagents and their pHs. Capillary electrophoresis (CE) separation with CL detection procedure was applied to the DBDMH solution. It was found that at least 3 species in the aqueous DBDMH solution could oxidize luminol to give luminescence: one of them was confirmed to be hypobromite and the others could be the unhydrolyzed or active oxygen produced in the hydrolysis reaction. Finally, a flow-injection chemiluminescent method was proposed for the determination of DBDMH. The concentration of the analyte showed a linear relationship with the CL intensity in the range of 1.2x10(-10) to 1.0x10(-6) mol dm-3 and the detection limit was as low as 6.2x10(-11) mol dm-3. The relative standard deviation (RSD) is 1.7% (n=9) for 2.8x10(-7) mol dm-3 DBDMH.     

Use of ion-selective electrodes in kinetic flow injection: determination of phenolic and hydrazino drugs with 1-fluoro-2,4-dinitrobenzene using a fluoride-selective electrode.

A flow injection (FI) kinetic potentiometric method for the determination of phenolic (acetaminophen and isoxsuprine) and hydrazino (isoniazid) drugs is described. This work shows the usefulness of ion-selective electrodes as detectors in FI systems, not only for direct ion determination but also in routine kinetic analysis. The method is based on the reaction of 1-fluoro-2,4-dinitrobenzene (FDNB) with the analytes in a weakly alkaline medium, which proceeds through the liberation of fluoride from the reagent. The slow reactions with phenols are catalysed by micelles of cetyltrimethylammonium bromide. The reaction rate is monitored with a fluoride-selective electrode in a wall-jet configuration and is used to construct a calibration graph of antilog(delta E/S)-1 versus c (where E = potential, s = slope of the electrode and c = concentration), using the fixed-time approach. The response time and the long-term stability of the electrode were found to be adequate for such kinetic determinations. The proposed method overcomes problems associated with end-point spectrophotometric methods using FDNB and allows measurements in highly coloured or turbid solutions. The optimized method has a linear concentration range of 1 x 10(-4)-50 x 10(-4) mol dm-3, a measurement throughput of 20 or 40 per hour and the precision ranges from 1.8 to 3.6% relative standard deviation (n = 3). Results obtained for commercial pharmaceutical formulations compare favourably with those given by reference methods.