Hydrophilic,cationic large‐core star polymers and polymer networks: Synthesis and physicochemical characterization

Group transfer polymerization was used to prepare hydrophilic, cationic large‐core star polymers (LCSPs) and networks of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and ethylene glycol dimethacrylate (EGDMA) in a two‐step procedure involving the synthesis of linear DMAEMA arms, followed by their crosslinking using a mixture of DMAEMA monomer and EGDMA crosslinker. The degree of polymerization of the linear chains prepared in the first step was kept constant, while the composition of the crosslinking mixture was varied systematically at a constant amount of crosslinker. The monomer/crosslinker molar ratio determined whether LCSPs or polymer networks would be produced. In particular, a high monomer/crosslinker molar ratio led to the formation of networks, whereas LCSPs were formed when a low monomer/crosslinker molar ratio was used. The absolute weight‐average molecular weight of the LCSPs was determined using static light scattering, whereas their hydrodynamic radii and radii of gyration were determined using dynamic light scattering and small‐angle neutron scattering, respectively. The sol fraction extracted from the networks decreased as the monomer/crosslinker molar ratio increased. The degrees of swelling of all of the networks were measured as a function of pH and were found to increase below pH 7. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3958–3969, 2008     

Strength of polymer phase boundaries with large interfacial width: Effects of interfacial profile and phase separation morphology

In this study, we investigate the effect of random copolymer additives on the interfacial profile, the lateral phase separation morphology, and the interfacial fracture toughness (G_c) between two immiscible polymers. The interface between polystyrene (PS)/poly(methyl methacrylate) (PMMA) was reinforced with a random copolymer mixture when two or more PS_f ‐r‐PMMA_1‐f random copolymers with different volume fraction, f, were blended. For short annealing time (<3 h), the random copolymer mixture exhibits a disordered and large domain structure (>1 lm) from which crazes can be extensively initiated and developed, leading to a large interfacial fracture energy. With increasing annealing time, the random copolymer mixture self‐organizes as multiple layers, with the composition that changes gradually from PS‐rich layers to PMMA‐rich layers across the interface, leading to a large interfacial width. However, within each layer, the random copolymer mixture microphase separates laterally into smaller domains (<200 nm). We found that the microphase‐separated domains with nanometer‐sized structure significantly affect the stability of craze fibrils that can be initiated and widened at the interface, leading to a decrease in the fracture energy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1834–1846, 2010     

Synthesis and characterization of amphiphilic star copolymers of 2-(dimethylamino)ethyl methacrylate and methyl methacrylate: Effects of architecture and composition

Six amphiphilic star copolymers comprising hydrophilic units of 2-(dimethylamino)ethyl methacrylate (DMAEMA) and hydrophobic units of methyl methacrylate (MMA) were prepared by the sequential group transfer polymerization (GTP) of the two comonomers and ethylene glycol dimethacrylate (EGDMA) cross-linker. Four star-block copolymers of different compositions, one miktoarm star, and one statistical copolymer star were synthesized. The molecular weights (MWs) and MW distributions of all the star copolymers and their linear homopolymer and copolymer precursors were characterized by gel permeation chromatography (GPC), while the compositions of the stars were determined by proton nuclear magnetic resonance (¹H NMR) spectroscopy. Tetrahydrofuran (THF) solutions of all the star copolymers were characterized by static light scattering to determine the absolute weight-average MW () and the number of arms of the stars. The of the stars ranged between 359,000 and 565,000 g mol⁻¹, while their number of arms ranged between 39 and 120. The star copolymers were soluble in acidic water at pH 4 giving transparent or slightly opaque solutions, with the exception of the very hydrophobic DMAEMA₁₀-b-MMA₃₀-star, which gave a very opaque solution. Only the random copolymer star was completely dispersed in neutral water, giving a very opaque solution. The effective pKs of the copolymer stars were determined by hydrogen ion titration and were found to be in the range 6.5-7.6. The pHs of precipitation of the star copolymer solutions/dispersions were found to be between 8.8-10.1, except for the most hydrophobic DMAEMA_10-b-MMA₃₀-star, which gave a very opaque solution over the whole pH range.     

Preparation of HPMC–EA–DMAEMA nanosized latex

Nanosized copolymer latex of hydroxypropylmethylcellulose (HPMC) grafted with ethyl acrylate (EA) and dimethylaminoethyl methacrylate (DMAEMA) has been prepared by acidifying submicron-sized latex particles synthesized by soap-free emulsion graft copolymerization using potassium persulfate (KPS) as initiator. The effects on the diameter of the latex particles of different conditions, for example concentration of DMAEMA, amount of HPMC, and ratio of HCl to DMAEMA for acidification, were investigated. It was found that increasing the mole ratio of HCl to DMAEMA to 1.0 and increasing the DMAEMA content both resulted in a decrease in particle diameter, whereas increasing the amount of HPMC resulted in larger particle sizes. Measurement by dynamic light scattering (DLS) revealed the diameter of the latex particles was >200 nm before acidification and <100 nm after acidification. Evidence of grafting was obtained by use of Fourier transform infrared (FTIR) spectroscopy. Transmission electron microscopy (TEM) was used to characterize the morphology of the copolymer particles before and after acidification.     

Water-soluble complexes from random copolymer and oppositely charged surfactant. 2. Complexes of poly(ethylene glycol)-based cationic random copolymer and bile salts

The complexes formed between the positively charged random copolymers (RCPs) of methoxy-poly(ethylene glycol) monomethacrylate (MePEGMA) and (3-(methacryloylamino)propyl)trimethylammonium chloride (MAPTAC) with oppositely charged biosurfactants (bile salts) were studied using turbidimetric titration, steady-state fluorescence, dynamic light scattering, and electron microscopy. Studies showed that the complexes of the RCPs of MAPTAC and MePEGMA with less than 68 mol % of PEG content precipitate in water, whereas the complexes of the copolymer with 89 and 94 mol % of PEG content do not precipitate in the entire range of composition of the mixture including stoichiometric compositions when the electroneutral complexes are formed. The complexes with true hydrophobic domains, which are a prerequisite characteristic to serve as a carrier, can be obtained at much lower concentration than the critical micelle concentration of the corresponding surfactant. For a particular surfactant, hydrophobic domains are obtained at lower Z-/+ for the random copolymer with lower PEG content. The hydrodynamic radii of these complexes vary over a range of 20-35 nm. Overall results reveal that these complexes are qualitatively similar to the polyion complex micelles or block ionomer complexes obtained from the block copolymers and oppositely charged surfactants. As the surfactants used in this study are biocompatible, we hope that these soluble particles will be promising vectors in the field of drug delivery.     

End‐linked amphiphilic polymer conetworks: Synthesis by sequential atom transfer radical polymerization and swelling characterization

Conetworks based on end‐linked homopolymers and amphiphilic gradient copolymers were synthesized by the atom transfer radical polymerization (ATRP) of 2‐(dimethylamino)ethyl methacrylate (DMAEMA, hydrophilic monomer), methyl methacrylate (MMA, hydrophobic monomer), and ethylene glycol dimethacrylate (EGDMA, hydrophobic cross‐linker). Sequential, rather than step‐wise polymerizations, were performed to enhance the livingness of the polymerization, particularly for the end‐linking step, and to ultimately obtain conetworks based on gradient rather than pure block copolymers. Amphiphilic conetworks based on end‐linked MMA‐DMAEMA‐MMA gradient copolymers of different compositions were successfully synthesized as confirmed by the narrow molecular weight distributions of the linear precursors, the rigidity of the amphiphilic conetwork products and the low sol‐fraction extracted from the conetworks. Similarly successful was the ATRP synthesis of an end‐linked conetwork based on a DMAEMA‐MMA statistical copolymer and of a randomly cross‐linked conetwork that resulted from the simultaneous terpolymerization of DMAEMA, MMA and EGDMA. An amphiphilic conetwork based on an end‐linked DMAEMA‐MMA‐DMAEMA gradient copolymer presented a less rigid, mucous‐like, texture. The degrees of swelling (DS) in tetrahydrofuran of all the conetworks were higher than those measured in pure water, whereas the aqueous DS values increased by lowering the pH and increasing the DMAEMA content of the conetworks. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1878–1886, 2010     

Polymeric nanosphere formed from temperature‐responsive polymer composed of (N,N‐dimethylamino)ethyl methacrylate and ethyl acrylamide

A nanosphere was formed from a temperature‐responsive random copolymer of (N,N‐dimethylamino)ethyl methacrylate (DMAEMA) and ethyl acrylamide (EAAm) without a crosslinker. When the copolymerization was performed in a water/ethanol solvent mixture (90/10 v/v %) above the lower critical‐solution temperature of poly(DMAEMA‐co‐EAAm), the nanosphere was formed with the propagation of copolymerization. Atomic force microscopy analysis and dynamic light scattering both showed the formation of nanosphere and the size was decreased as the EAAm content increased in the copolymer. To illuminate this nanosphere formation phenomena, molecular dynamic simulations were performed with model polymer solutions. According to the analysis of the simulation trajectory, the ethyl groups of ethanol bind to the hydrophobic sites of poly(DMAEMA) or poly(DMAEMA‐co‐EAAm), and water molecules can bind preferentially to CO groups that are abundant on the surface of the core, which is composed of oligomer and ethanol. This may enable the polymerization to proceed within the core, which is transformed into nanosphere. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 594–600, 2001     

Synthesis of a polystyrene-arm-polybutadiene-arm-poly(methyl methacrylate) triarm star copolymer

The straightforward synthesis of a polystyrene-arm-polybutadiene-arm-poly(methyl methacrylate) triarm star copolymer has been successfully realized by a sequence of reactions which involves the sequential addition of a living polybutadienyllithium to a polystyrene macromonomer with a terminal 1,1-diphenylethylene unit and subsequent polymerization of methyl methacrylate. The high-molecular-weight polystyrene-arm-polybutadiene-arm-poly(methyl methacrylate) star copolymer shows microphase separation into three phases.     

An Arm‐First Approach to Cleavable Mikto‐Arm Star Polymers by RAFT Polymerization

Redox‐cleavable mikto‐arm star polymers are prepared by an “arm‐first” approach involving copolymerization of a dimethacrylate mediated by a mixture of macroRAFT agents. Thus, RAFT copolymerization of the monomers BMA, DMAEMA, and OEGMA, with the disulfide dimethacrylate cross‐linker (DSDMA), bis(2‐methacryloyl)oxyethyl disulfide, mediated by a 1:1:1 mixture of three macroRAFT agents with markedly different properties [hydrophilic, poly[oligo(ethylene glycol) methacrylate]—P(OEGMA)_8–9; cationizable, poly[2‐(dimethylamino)ethyl methacrylate]—P(DMAEMA); hydrophobic, poly(n‐butyl methacrylate)—P(BMA)] provides low dispersity mikto‐arm star polymers. Good control (Đ < 1.3) is observed for the target P(DMAEMA)/P(OEGMA)/P(BMA) (3:3:1) mikto‐arm star, a double hydrophilic P(DMAEMA)/P(OEGMA) (3:3) mikto‐arm star and a hydrophobic P(BMA) homo‐arm star. However, Đ for the target mikto‐arm stars increases with an increase in either the ratio [DSDMA]:[total macroRAFT] or the fraction of hydrophobic P(BMA) macroRAFT agent. The quaternized mikto‐arm star in dilute aqueous solution shows a monomodal particle size distribution and an average size of ≈145 nm.

     

聚甲基丙烯酸β羟乙酯在聚乙烯膜上辐射接枝物的形态结构

本文用透射电子显微镜(TEM),光学显微镜(OM),小角X射线散射(SAXS)等方法研究了聚甲基丙烯酸β羟乙酯(HEMA)在聚乙烯(PE)膜上辐射接枝物的形态结构.观察了微相结构随接枝条件变化规律.HEMA为支链的接枝共聚物的基本形态是高度分散的HEMA微区(约几百A)存在于PE连续相中的两相体系.随接枝量增加,微区形态发生变化.SAXS结果进一步证实了接枝共聚物相分离的形态结构,并利用Tsvankin-Buchanan公式计算了共聚物的长周期、无定形层厚及一维结晶度.     

聚四氢呋喃-聚甲基丙烯酸甲酯两嵌段共聚物的结晶行为

报导了系列聚四氢呋喃-聚甲基丙烯酸甲酯结晶-非晶(硬段型)两嵌段共聚物的结晶行为，结果表明，其微相分离和结晶规律与文献上唯一进行过系统研究的同类嵌段共聚物(PEO－b－PS)都有较大的差别；结晶段结晶能力的大小是制约这类体系微相分离和结晶规律的一个重要因素．     

Synthesis and characterization of shell-cross-linked polymer networks and large-core star polymers: Effect of the volume of the cross-linking mixture

Group transfer polymerization and sequential addition of monomer and cross-linker were employed for the preparation of two new polymer structures, one of a polymer network and the other of a star polymer. The synthesis was completed in two steps, involving the synthesis of linear methyl methacrylate (MMA) arms of degree of polymerization of 20, followed by their cross-linking using a mixture of MMA monomer and ethylene glycol dimethacrylate (EGDMA) cross-linker. In this study, the volume of the cross-linking mixture was varied systematically. Furthermore, two mixture compositions were employed, involving MMA:EGDMA molar ratios of 1:1 and 3:1, leading to two series of polymeric materials. It was found that at a given cross-linking mixture composition, a larger volume of the cross-linking mixture favored the formation of polymer networks, whereas a smaller volume favored the formation of star polymers. The linear precursors, the star polymers and the extractables from the polymer networks were characterized by gel permeation chromatography in tetrahydrofuran (THF). The absolute weight-average molecular weight, the number of arms and the hydrodynamic radii of the star polymers, as determined using static and dynamic light scattering in THF, respectively, and their average radii as determined by atomic force microscopy, increased as the volume of the cross-linking mixture increased. The gravimetrically measured degrees of swelling in THF, the network sol fraction and the percentage of branched polymer in the sol fraction decreased as the volume of the cross-linking mixture increased.     

Lamellae orientation in block copolymer films with ionic complexes

Lamellae orientation in lithium-complexed polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) copolymer films on natively oxidized silicon wafers is investigated as a function of film thickness and percentage of carbonyl groups coordinated with lithium ions using cross-sectional transmission electron microscopy and grazing incidence small-angle X-ray scattering. For films with a lower percentage of ionic complexes, the strong surface interaction of the PMMA blocks with the substrate is not changed significantly and the orientation of the lamellar microdomains depends on the film thickness and is dictated by a coupling of the interfacial interactions and the degree of microphase separation. For films with a higher percentage of ionic complexes, the surface interaction is mediated. Along with the enhanced immiscibility between the two blocks, which drives the self-assembly into a stronger microphase segregation, an orientation of the lamellar microdomains normal to the surface is seen, independent of film thickness. Thus, by tuning the amount of ionic complexes, the orientation of lamellar microdomain can be controlled from a random arrangement to being oriented parallel or perpendicular to the film surface without any surface modification or use of external fields, which opens a simple and general route for the fabrication of nanostructured materials.     

Thermoresponsive terpolymers based on methacrylate monomers: Effect of architecture and composition

A series of amphiphilic thermoresponsive copolymers was synthesized by group transfer polymerization. Seven copolymers were prepared based on the nonionic hydrophobic n‐butyl methacrylate (BuMA), the ionizable hydrophilic and thermoresponsive 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and the nonionic hydrophilic poly(ethylene glycol)methyl methacrylate (PEGMA). In particular, one diblock copolymer and six tricomponent copolymers of different architectures and compositions, one random and five triblock copolymers, were synthesized. The polymers and their precursors were characterized in terms of their molecular weight and composition using gel permeation chromatography and proton nuclear magnetic resonance spectroscopy, respectively. Aqueous solutions of the polymers were studied by turbidimetry, hydrogen ion titration, and light scattering to determine their cloud points, pK_as, and hydrodynamic diameters and investigate the effect of the polymers' composition and architecture. The thermoresponsive behavior of the copolymers was also studied. By increasing the temperature, all polymer solutions became more viscous, but only one polymer, the one with the highest content of the hydrophobic BuMA, formed a stable physical gel. Interestingly, the thermoresponsive behavior of these triblock copolymers was affected not only by the terpolymers' composition but also by the terpolymers' architecture. These findings can facilitate the design and engineering of injectable copolymers for tissue engineering that could enable the in situ formation of physical gels at body temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 775–783, 2010     

PDMS-MDI-PEG多嵌段共聚物涂层表面微相分离行为研究

采用两步溶液聚合方法合成了一系列聚二甲基硅氧烷(PDMS)-4,4′-二苯基甲烷二异氰酸酯(MDI)-聚乙二醇(PEG)多嵌段共聚物.利用轻敲模式原子力显微镜(AFM)观察了嵌段共聚物的表明形貌,研究了退火、共聚物组成以及PEG分子量和不同的官能团对涂层表面微相分离行为的影响,同时对微相分离行为的形成机理也作了相应的探讨.研究表明,该嵌段共聚物即使在PDMS含量大于50wt%时,涂层表面仍呈现出规整有序的纳米级相分离结构,其中疏水相和亲水相分别由PDMS链段和MDI-PEG组分构成.     

Temperature- and pH-responsive star amphiphilic block copolymer prepared by a combining strategy of ring-opening polymerization and reversible addition-fragmentation transfer polymerization

The star-shaped poly(ε-caprolactone)-b-poly(2-(dimethylamino)ethyl methacrylate) (HPs-Star-PCL-b-PDMAEMA) was synthesized by ring-opening polymerization and reversible addition-fragmentation chain transfer (RAFT) polymerization. Star-shaped polycaprolactones (HPs-Star-PCL) were synthesized by the bulk polymerization of ε-caprolactone (CL) with a hyperbranched polyester initiator and tin 2-ethylhexanoate as a catalyst. The number-average molecular weight of these polymers linearly increased with the increase of the molar ratio of CL to hyperbranched initiator. HPs-Star-PCL was converted into a HPs-star-PCL-RAFT by an esterification of HPs-Star-PCL and 4-cyanopentanoic acid dithiobenzoate. Star amphiphilic block copolymer HPs-Star-PCL-b-PDMAEMA was obtained via RAFT polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA). The molecular weight distribution of HPs-Star-PCL-b-PDMAEMA was narrow. Furthermore, the micellar properties of HPs-Star-PCL-b-PDMAEMA in water were studied at various temperatures and pH values by means of dynamic light scattering (DLS). The results indicated that the star copolymers had the pH- and temperature-responsive properties. The release behaviors of model drug aspirin from the star polymer indicated that the rate of drug release could be effectively controlled by pH value and temperature.     

Metal‐free synthesis of responsive polymers: Cloud point tuning by controlled “click” reaction

Nitroxide‐mediated radical polymerization has been used for the preparation of pentafluorostyrene (PFS) homopolymers and random copolymers of PFS and oligo(ethyleneglycol) methacrylate (OEGMA_8.5). The poly(pentafluorostyrene) homopolymers were reacted with thiophenol at different ratios at room temperature in the presence of triethylamine. The “clicked” polymers were characterized by ¹H and ¹⁹F NMR spectroscopy and size exclusion chromatography. Moreover, the copolymerization kinetics of the PFS and OEGMA_8.5 copolymers was followed, and the phase transition behavior of random copolymers with different compositions was discussed. Furthermore, copolymers of PFS and 2‐(dimethylamino) ethyl methacrylate (DMAEMA) were prepared at various mole ratios, and the copolymer with a 10:90 ratio, respectively, was soluble in water at room temperature. Turbidimetry measurements were performed for PFS and OEGMA_8.5 or DMAEMA copolymers to determine their cloud points. Finally, the PFS and OEGMA_8.5 copolymer with a mole ratio of 60:40 was reacted further with thiophenol to increase the hydrophobic part in the copolymer. The cloud points of the obtained copolymers could be tuned from 87 to 33 °C by using not only the controlled radical polymerization but also the “click” reaction in a controlled fashion. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1278–1286, 2010     

Synthesis and characterization of rigid functional anionic polyelectrolytes: Block copolymers and star homopolymers

Seven cyclolinear polymers bearing the tertiary‐butyl α‐(hydroxymethyl)acrylate (TBHMA) ether dimer were prepared using reversible addition–fragmentation chain transfer (RAFT) polymerization. Of the seven polymers, five were cyclolinear homopolymers of the TBHMA ether dimer with different degrees of polymerization, one was an “arm‐first” star homopolymer, and the other was an amphiphilic linear copolymer based on the positively ionizable hydrophilic 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and the TBHMA ether dimer. For comparison, two more polymers were prepared using RAFT polymerization where the TBHMA ether dimer was replaced by tertiary‐butyl methacrylate (tBuMA). In particular, an amphiphilic linear DMAEMA–tBuMA diblock copolymer and a tBuMA arm‐first star homopolymer were also synthesized. All polymers were characterized in terms of their molecular weights and composition using gel permeation chromatography and ¹H NMR spectroscopy, respectively. Subsequently, the tertiary‐butyl groups of the TBHMA ether dimer units and those of the tBuMA units were cleaved by hydrolysis to yield carboxylic acid groups. The successful removal of the tertiary‐butyl groups was confirmed using ¹H and ¹³C NMR and attenuated total reflectance‐Fourier transform infrared spectroscopies. The hydrolyzed (co)polymers exhibited pK values of the carboxylic acid groups of around 4.5, and glass transition temperatures, T_g, of around 200 °C, which were 50 °C higher than those of their nonhydrolyzed precursors. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Thermoresponsive gels based on ABA triblock copolymers: Does the asymmetry matter?

The aim of this study was to investigate the effect of the asymmetry of the triblock copolymers on their thermoresponsive self‐assembly behavior. To this end, nine ABA‐type triblock copolymers with n‐butyl methacrylate and 2‐(dimethylamino)ethyl methacrylate (DMAEMA) consisting of the A and the B blocks, respectively, were synthesized. Polymers of three different DMAEMA contents (50, 60, and 70 wt %) were synthesized while varying the length ratio of the two hydrophobic A blocks. Specifically, one symmetric ABA triblock copolymer and two asymmetric ABA′ triblock copolymers with the length of the second A block to be twice or four times bigger than the length of the first A block (AB2A and AB4A triblock copolymer) were synthesized for each DMAEMA composition. Three statistical copolymers were also synthesized for comparison. The thermoresponsive behavior of the copolymers was studied and it was found that the cloud point and rheological properties of the polymers were strongly affected by the architecture (statistical vs. block) and less strongly by the DMAEMA composition and the asymmetry of the polymers. Nevertheless, interestingly the asymmetry of the ABA triblock copolymers did influence the thermoresponsive behavior with the more symmetric polymers presenting a sol–gel transition at lower temperatures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2850–2859.     

Diphilic Macromolecular Brushes with a Polyimide Backbone and Poly(methacrylic acid) Blocks in Side Chains

Novel macromolecular brushes with a polyimide backbone and diphilic diblock copolymer side chains consisting of a hydrophilic block of poly(methacrylic acid) adjacent to the backbone and the outer hydrophobic block of poly(methyl methacrylate) are synthesized. The synthesis includes the grafting of poly(tert-butyl methacrylate) to the polyimide chain followed by the polymerization of methyl methacrylate on the graft copolyimide as a branched multicenter macroinitiator. Brushes with diphilic side chains are obtained via the acidic hydrolysis of ester groups in the first block of side chains. The grafting polymerization of methacrylates is performed according to the “grafting from” approach by the method of pseudoliving atom transfer radical polymerization using two methodologies of polymerization activated by either copper- or iron-containing complexes. Conditions providing the controlled regime of the polymerization processes under study are found, and pathways for the targeted regulation of the degree of polymerization of methacrylate blocks and their grafting density are determined. As is shown by dynamic light scattering and transmission electron microscopy, the macromolecules of brushes with diphilic side chains form in ethanol homotypic, obviously spherical, supramolecular micellar structures with hydrodynamic radii in the range from 40 to 120 nm depending on the length and grafting density of the two blocks in diphilic side chains.