Biological UV dosimeters in quality control of tanning tubes

Although according to the International Radiological Protection Association-International Non-Ionizing Radiation Committee recommendation (1991) the use of sunbeds for cosmetic purposes is not recommended, tanning devices are used widely. Ten different types of commercially available sunbed tubes have been studied using a uracil biological UV dosimeter, and three of them were analyzed in detail. Dimerization effectiveness of the tubes was measured directly, whereas efficiency of erythema induction was calculated weighting the emission spectra by the Commission Internationale de l'Eclairage erythema action spectrum. The data obtained demonstrate that quality control of sunbed tubes has to include not only the determination of the UV doses administered but also the assessment of the health risk due to the UVB and UVA components of the lamp. A method of quality control using the uracil biological dosimeter was elaborated, and the estimation of the "acceptable" exposure time was checked/controlled on 15 volunteers by assessing individually the erythema induction threshold. A correct classification of the sunbed tubes is proposed by characterizing the erythema induction versus DNA-damaging effectiveness of tubes.     

A fast determination of nitrate in rain and surface waters by means of UV spectrophotometry

Summary Organic substances are the main interference in the direct U.V. spectrophotometric determination of nitrate at 210 nm. An active carbon filter (Filopur) is therefore proposed which adsorbs all organic interferences. With this filter the U.V. spectrophotometric method gives the same results as the Na-salicylate method. The reproducibility is generally better than 5 %. One determination takes 50 s.

---

Rasche Nitratbestimmung in Regen- und Oberflächenwasser mittels UV-Spektralphotometrie

Zusammenfassung Organische Substanzen sind die größte Störungsquelle bei der UV-spektralphotometrischen Bestimmung von Nitrat in Regen- und Oberflächenwasser bei 210 nm. Ein Filter (Filopur), der aktive Kohle als wirksame Komponente enthält, wird daher zur Entfernung der organischen Substanzen vorgeschlagen. Unter Verwendung dieses Filters erzielt man mit dem UV-spektralphotometrischen Verfahren die gleichen Ergebnisse wie mit der Na-salicylat-Methode. Die Reproduzierbarkeit ist meistens besser als 5%. Eine Bestimmung erfordert einen Zeitaufwand von 50 s.

     

A compact flow injection analysis system for surface mapping of phosphate in marine waters

The design, construction and validation of a compact, portable flow injection analysis (FIA) instrument for underway analysis of phosphate in marine waters is described. This portable system employs gas pressure for reagent propulsion and computer controlled miniature solenoid valves for precise injection of multiple reagents into a flowing stream of filtered sample. A multi-reflection flow cell with a solid state LED photometer is used to detect filterable reactive phosphate (0.2 mum) as phosphomolybdenum blue. All the components are computer controlled using software developed using the Labviewtrade mark graphical programming language. The system has the capacity for sample throughput of up to 380 phosphate analyses per hour, but in the mode described here was operated at 225 analyses per hour. Under these conditions, the system exhibited a detection limit of 0.15 muM, reproducibility of 1.95 % RSD (n=9) and a linear response (r(2)=0.9992) when calibrated in the field with standards in the range 0.81-3.23 muM. The system was evaluated for the mapping of phosphate concentrations in Port Phillip Bay, south eastern Australia, and during the course of a 150 km cruise, 542 analyses were performed automatically. In general, good agreement was observed between analyses obtained using the portable FIA system and those obtained from manual sampling and laboratory analysis.     

Synthesis and DNA damaging ability of enediyne-polyamine conjugates

Polyamine-enediyne conjugates were synthesized and exhibited potent DNA damaging ability under physiological conditions. The extent of their activity was shown to depend upon the polyamine length that regulates the DNA binding affinity of the conjugates, and enhanced DNA damaging activities were observed under slightly acidic conditions.     

Biological UV dosimeters in the assessment of the biological hazard from environmental radiation

To determine the impact of environmental UV radiation, biological dosimeters that weight directly the incident UV components of sunlight have been developed, improved and evaluated in the frame of the BIODOS project. Four DNA-based biological dosimeters ((i) phage T7, (ii) uracil thin layer, (iii) spore dosimeter and (iv) DLR-biofilm) have been assessed from the viewpoint of their biological relevance, spectral response and quantification of their biological effectiveness. The biological dosimeters have been validated by comparing their readings with weighted spectroradiometer data, by comparison with other biological doses, as well as with the determined amounts of DNA UV photoproducts. The data presented here demonstrate that the biological dosimeters are potentially reliable field dosimeters for measuring the integrated biologically effective irradiance for DNA damage.     

Distribution and fate of biologically formed organoarsenicals in coastal marine sediment

Marine organisms, including phyto‐ and zoo‐plankton, macroalgae, and animals, concentrate arsenic in various organic forms. However, the distribution and fate of these organoarsenicals in marine environments remains unclear. In this study, the distribution of organoarsenicals in coastal marine sediment in Otsuchi Bay, Japan, has been determined. Methylarsonic acid, dimethylarsinic acid, trimethylarsine oxide, arsenobetaine, arsenocholine and other unidentified arsenic species were detected in marine sediment by high‐performance liquid chromatography–inductively coupled plasma mass spectrometry analysis of methanol–water extracts. Arsenobetaine was the dominant organoarsenical at four of the seven stations where tests were carried out, and unidentified species or dimethylarsinic acid dominated at the other stations. Total organoarsenicals (as arsenic) in the surface sediment amounted to 10.6–47.5 µg kg^?1 dry sediment. Core analysis revealed that concentrations of organoarsenicals decreased with depth, and they are considered to be degraded within 60 years of deposition. These results show that organoarsenicals formed by marine organisms are delivered to the sediment and can be degraded within several decades. Copyright © 2005 John Wiley & Sons, Ltd.     

Inactivation efficiencies of radical reactions with biologically active DNA

Dilute aqueous solutions of biologically active θX174 DNA may serve as a simplified model system of the cell. Damage to the DNA after irradiation with γ-rays, may be ascribed to reactions with ^.OH, ^.H and e^-_aq or secondary radicals, arising from reactions of water radicals with added scavengers. Conversion of primary (water) radicals into secondary (scavenger) radicals leads to a considerable protection of the DNA, which, however, would have been larger if these secondary radicals did not contribute to DNA inactivation. The inactivation yield due to isopropanol or formate (secondary) radicals depends on dose rate as well as DNA concentration. Furthermore the inactivation efficiencies of the reactions of both the primary and the secondary radicals with single-stranded DNA could be established.     

Pesticide levels in ground and surface waters of Primavera do Leste Region, Mato Grosso, Brazil

Residues of the herbicides simazine, metribuzin, metolachlor, trifluralin, atrazine, and two metabolites of atrazine, deisopropylatrazine (DIA) and deethylatrazine (DEA), are surveyed in the surface and groundwater of the Primavera do Leste region, Mato Grosso, Brazil during September and December 1998 and April 1999. Different water source sampling stations of groundwater (irrigation water well, drinking water well, and water hole) and surface water (dam and river) are set up based on agricultural land use. A solid-phase extraction procedure followed by gas chromatography-nitrogen-phosphorus detection is used for the determination of these compounds. All compounds are detected at least once in water samples. A temporal trend of pesticide contamination is observed, with the highest contamination frequency occurring in December during the main application season. Metribuzin shows the highest individual detection frequencies throughout the monitoring period, followed by metolachlor, simazine, and DEA. The maximum mean concentrations of pesticides in this study are in the range from 0.14 to 1.7 microg/L. We deduct that the contamination of water resources is predominantly caused by non-point pollution of pesticides used in intensive cash-crop cultures of the Cerrado area. Therefore, a continuous monitoring of pesticide concentrations in water resources of this tropical region is necessary to detect the longer term contamination trends and developing health risks.     

Determination of herbicides in mineral and stagnant waters at ng/L levels using capillary electrophoresis and UV detection combined with solid-phase extraction and sample stacking

In this work, the combined use of solid-phase extraction (SPE) and on-line preconcentration strategies as normal stacking mode (NSM) and stacking with matrix removal (SWMR) for the ultrasensitive and simultaneous capillary electrophoresis-ultraviolet analysis (CE-UV) of five triazolopyrimidine sulfonanilide pesticides (i.e., diclosulam, cloransulam-methyl, flumetsulam, metosulam and florasulam) in different types of water is investigated. An adequate separation electrolyte for the separation and stacking of these pesticides was obtained, considering also its compatibility with MS detection, which consisted of 24 mM formic acid and 16 mM ammonium carbonate at pH 6.4. It was observed that the use of this running buffer together with the SWMR preconcentration method provided the best results in terms of sensitivity (between 6.54 and 11.9 microg/L) and peak efficiency (up to 550000 theoretical plates per meter, NTP/m). When this on-line preconcentration procedure was combined with an off-line sample preconcentration step as SPE using C18 cartridges, the selected herbicides could be detected in the ng/L range. The optimized SPE-SWMR-CE-UV method was applied to the determination of the selected group of pesticides in spiked and non-spiked mineral and stagnant waters. Recoveries ranged between 55 and 110% and limits of detection between 131 and 342 ng/L. This work shows the great possibilities of the combined use of SPE-SWMR-CE-UV to overcome the sensitivity problems usually linked to CE analysis.     

Solvating,manipulating, damaging,and repairing DNA in a computer

This work highlights four different topics in modeling of DNA: (i) the importance of water and ions together with the structure and function of DNA; the hydration structure around the ions appears to be the determining factor in the ion coordination to DNA, as demonstrated in the results of our MD simulations; (ii) how MD simulations can be used to simulate single molecule manipulation experiments as a complement to reveal the structural dynamics of the studied biomolecules; (iii) how damaged DNA can be studied in computer simulations; and (iv) how repair of damaged DNA can be studied theoretically. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Characterisation of dissolved combined amino acids in marine waters

Dissolved combined amino acids (DCAA) are important constituents of the dissolved organic nitrogen (DON) pool in marine environments, although little is known about their sources, dynamics and sinks. The DCAA pool consists of various compounds including proteins and peptides, proteins linked to sugars and amino acids adsorbed to humic and fulvic acids, clays and other materials. The proportions of each of these components and the extent to which they are used by microplankton living within the photic zone are not known. An investigation was carried out, using (15)N isotope dilution techniques, to determine the concentration and composition of dissolved amino acid pools in the marine environment. A near-shore seawater sample was collected and split into fractions to determine the concentrations of dissolved free amino acids (DFAA), DCAA and a <3 kDa dissolved peptide fraction (DPEP; obtained by ultrafiltration). DCAA and DPEP fractions were hydrolysed to yield free amino acids and all samples were analysed by gas chromatography/mass spectrometry (GC/MS) as isobutyloxycarbonyl/tert-butyldimethylsilyl derivatives. The DFAA was the smallest fraction representing approximately 1% of total dissolved amino acids. The majority of DCAA was contained in the low molecular weight DPEP fraction (90%) and was probably as a result of release from phytoplankton and degradation by heterotrophic bacteria.     

Organotin stability during storage of marine waters and sediments

Summary The stability of organotin compounds in water and sediment samples during storage and pre-treatment is of paramount importance. This study presents experiments with butyltin compounds showing that the storage of filtered natural seawater in the dark at pH 2 in pyrex glass bottles is suitable to preserve the stability of tributyltin (TBT) over 4 months both at 20–25°C and 4°C. The other butyltin compounds (mono- and dibutyltin) are stable at 4°C but display some losses at 25°C. A poor recovery of butyltins in turbid water hampered the assessment of the stability on a quantitative basis: however, it could be demonstrated on a qualitative basis that the butyltin stability is uneasily achieved in water samples with high suspended matter. Finally, wet storage and freezing are found to be suitable to preserve the tributyltin stability in sediments, as well as ovendrying (at 50°C), freeze-drying and air-drying. Mono- and dibutyltin are generally subject to changes during the storage of sediments using the different methods.     

Characterization of exopolysaccharides in marine colloids by capillary electrophoresis with indirect UV detection

A method was established using capillary electrophoresis with indirect UV detection for analysis of monosaccharides liberated from exopolysaccharides by acidic hydrolysis. Tangential flow filtration was used to isolate high molecular weight polysaccharides from seawater. The capillary electrophoresis method included the use of a background electrolyte consisting of 2,6-dimethoxyphenol and cetyltrimethylammonium bromide. Several neutral sugars commonly existing in marine polysaccharides were separated under optimized conditions. The relative standard deviations were between 1.3% and 2.3% for relative migration time and 1.3-2.5% for peak height. Detection limits (at S/N 3) were in the range of 27.2-47.8 μM. The proposed approach was applied to the analysis of hydrolyzed colloidal polysaccharides in seawater collected from the Baltic Sea. Nanomolar levels of liberated monosaccharides in seawater samples can be detected by preconcentration up to 30,000 times.     

Analysis of UV filters in tap water and other clean waters in Spain

The present paper describes the development of a method for the simultaneous determination of five hormonally active UV filters namely benzophenone-3 (BP3), 3-(4-methylbenzylidene) camphor (4MBC), 2-ethylhexyl 4-(dimethylamino) benzoate (OD-PABA), 2-ethylhexyl 4-methoxycinnamate (EHMC) and octocrylene (OC) by means of solid-phase extraction and gas chromatography–electron impact ionization–mass spectrometry. Under optimized conditions, this methodology achieved low method limits of detection (needed for clean waters, especially drinking water analysis), between 0.02 and 8.42 ng/L, and quantitative recovery rates higher than 73% in all cases. Inter- and intraday precision for all compounds were lower than 7% and 11%, respectively. The optimized methodology was applied to perform the first survey of UV absorbing compounds in tap water from the metropolitan area and the city of Barcelona (Catalonia, Spain). In addition, other types of clean water matrices (mineral bottled water, well water and tap water treated with an ion-exchange resin) were investigated as well. Results evidenced that all the UV filters investigated were detected in the water samples analyzed. The compounds most frequently found were EHMC and OC. Maximum concentrations reached in tap water were 290 (BP3), 35 (4MBC), 110 (OD-PABA), 260 (EHMC), and 170 ng/L (OC). This study constitutes the first evidence of the presence of UV filter residues in tap water in Europe.     

Mercury determination and speciation analysis in surface waters

A sorbent L-cysteine grafted silica gel has been evaluated for separation and enrichment of dissolved inorganic i-Hg(II) and methylmercury CH₃Hg(I) from surface waters at sub-μg L⁻¹ concentrations. Chemical parameters for mercury species enrichment and separation have been optimized. Analytical schemes for the determination of Hg species, using selective column solid phase extraction (SPE) with continuous flow chemical vapor generation atomic absorption spectrometry (CF-CVG-AAS) or inductively coupled plasma-mass spectrometry (ICP-MS) were developed. Possibilities for on-site SPE enrichment were demonstrated as well. The limits of quantification were 1.5 and 5 ng L⁻¹ for dissolved i-Hg(II) and CH₃Hg(I) by CF-CVG-AAS and 1 and 2.5 ng L⁻¹ by ICP-MS with relative standard deviations between 7–12% and 7–14%, respectively. The chemically modified SPE sorbent has demonstrated high regeneration ability, chemical and mechanical stability, acceptable capacity and good enrichment factors. Results for total dissolved mercury were in reasonable agreement with those from independent analyses by direct ICP-MS determinations for river waters and for estuarine water certified reference material.      

Temporal evolution of the3H levels in the surface waters around the Almaraz Nuclear Power Plant

We have quantified the evolution during 1994 of the impact on the Tagus river of liquid releases of³H (51.3 TBq in the cited year), originating from the functioning of the Almaraz Nuclear Power Plant, and conditioned by the management of the cooling reservoir water. Taking into account, on the one hand, that tritiated water is hydrodynamically indistinguishable from untritiated water when both form part of the same mass of liquid, and, on the other, the practically null stratification and forced circulation of the water in the cited cooling reservoir, together with the hydrological fluxes interchanged between the said reservoir and the Tagus river (which is entirely regulated in the section under study and, because of prolonged drought, had a relatively small flow during the study period), we were able to model satisfactorily the temporal evolution of the³H activity in the cooling reservoir.     

The determination of vanadium in sea and surface waters

A simple and sensitive method for the determination of vanadium in sea and surface water is presented. The method is based on preconcentration of vanadium on active charcoal at a pH 3.6±0.2, followed by instrumental neutron activation analysis of the charcoal adsorbers and measurement of⁵²V (T=3.71 m). The limit of the determination, which is set by the blank value of the charcoal, is 0.01 μg V·1⁻¹. Data are given for Dutch sea and surface water.     

Trace-level monitoring of chloroanilines in environmental waters using on-line trace-enrichment and liquid chromatography with UV and electrochemical detection

Summary An on-line procedure is described for the trace-level determination of mono-, di- and methyl-chloroanilines in aqueous samples using selective preconcentration with a cation-exchanger and liquid chromatography with UV and electrochemical detection. Because direct percolation through a cation-exchanger has to be avoided owing to the high content of inorganic anions present in natural waters, a two-step on-line preconcentration was carried out: chloroanilines were first trapped on a precolumn packed with an apolar polymeric sorbent (PRP-1) in their neutral form. Then the PRP-1 precolumn was coupled in series with a second precolumn containing cation exchange material. The chloroanilines were removed from the first precolumn with 3 mL of deionised water: acetonitrile (31) at pH 1 and retained by the cation exchange column. The contents of the cation exchange column were finally desorbed onto the analytical column and eluted with a water: acetonitrile gradient. The combination of selective trace enrichment and sensitive electrochemical detection allows the simultaneous determination of chloroanilines from 150 mL of river water samples with detection limits below 30 ng/l. Identification is confirmed by the selective preconcentration and the two detection modes.     

The role of the spectral sensitivity curve in the selection of relevant biological dosimeters for solar UV monitoring

To estimate the risk of enhanced UV-B radiation due to stratospheric ozone depletion, phage T7 and uracil thin-layer biological dosimeters have been developed, which weight the UV irradiance according to induced DNA damage. To study the molecular basis of the biological effects observed after UV irradiation, the spectral sensitivity curves of the two dosimeters and induction of the two major DNA photoproducts, cyclobutane pyrimidine dimers (CPDs) and 6-4 photoproducts ((6-4)PDs), in phage T7 have been determined for polychromatic UV sources. CPDs and (6-4)PDs are determined by lesion-specific monoclonal antibodies in an immunodotblot assay. Phage T7 and uracil biological dosimeters together with a Robertson-Berger (RB) meter have been used for monitoring environmental radiation from the polar region to the equator. The biologically effective dose (BED) established with the three different dosimeters increases according to the changes in the solar angle and ozone column, but the degree of the change differs significantly. The results can be explained based on the different spectral sensitivities of the dosimeters. A possible method for determining the trend of the increase in the biological risk due to ozone depletion is suggested.