The sorption properties of chitosan-carbon fibrous materials

The kinetics and equilibrium of sorption of copper(II) ions on natural biopolymer chitosan, activated carbon fiber, and composite materials prepared by electrochemical modification of activated carbon fibers with chitosan were studied. The influence of the conditions of modification of the microporous carbon matrix on the sorption properties of composite materials with respect to copper(II) was investigated. It was shown that changes in modification conditions could be used to control the sorption properties of chitosan-carbon materials. The mechanisms of copper(II) ion absorption by the sorption materials studied were considered.     

Removal of copper from aqueous solution by aminated and protonated mesoporous aluminas: kinetics and equilibrium

A novel adsorbent, aminated and protonated mesoporous alumina, was prepared and employed for the removal of copper from aqueous solution at concentrations between 5 and 30 mg/l, in batch equilibrium experiments, in order to determine its adsorption properties. The removal of copper by the adsorbents increases with increasing adsorbent dosages. The adsorption mechanism is assumed to be an ion exchange between copper and the hydrogen ions present on the surface of the mesoporous alumina. The adsorbent was characterized by XRD, TEM, SEM, and BET methods. The sorption data have been analyzed and fitted to linearized adsorption isotherm of the Freundlich, Langmuir, and Redlich-Peterson models. The batch sorption kinetics have been tested for first-order, pseudo-first-order, and pseudo-second-order kinetic reaction models. The rate constants of adsorption for all these kinetic models have been calculated. Results also showed that the intraparticle diffusion of Cu(II) on the mesoporous catalyst was the main rate-limiting step.     

Coal as a New Carbon Paste Electrode Modifier with Sorption Properties

A new type of carbon paste electrode modified with subbituminous and bituminous coal is presented. The operability of the coal carbon paste electrode with respect to the working potential window attainable was tested in various electrolytes. Cyclic voltammetry of the reference redox system [Fe(CN)₆]^3?/4? was performed to evaluate electron transfer kinetics. Open‐circuit sorption of Cd(II), Pb(II), and Cu(II) with subsequent anodic stripping voltammetry was used to pilot coal sorption ability. The coal modified carbon paste electrode was also examined as a support for mercury film deposition and anodic stripping voltammetry of metals.     

Sorption kinetic studies of U(VI) on inorganic and organic modified red earth: comparison of linear and non-linear methods

The sorption of U(VI) on natural red earth, inorganic modified red earth and organic modified red earth were studied under given conditions. Kinetic studies of U(VI) sorption onto the red earth samples were discussed by linear and non-linear approaches. The results indicated that the inorganic modification greatly improved the surface properties and the sorption kinetics characteristics, and that organic modification increased the sorption capacity significantly. The non-linear pseudo-second-order kinetic model could fit the kinetics much better compared with the other linear forms.

     

Kinetics and Equilibrium Models for Sorption of Cu(II) onto a Novel Manganese Nano-adsorbent

The studies of kinetics and equilibrium sorption of Cu(II) were undertaken using nanoscale zerovalent manganese (nZVMn) synthesized by chemical reduction in a single pot system. nZVMn was characterized using scanning electron microscopy, energy dispersive x-ray, and surface area determined by Brunauer–Emmett–Teller. The effect of pH, contact time, adsorbent dose, agitation speed, initial Cu(II) concentrations, temperature, and ionic strength on the sorption of Cu(II) onto nZVMn were investigated in a batch system. The kinetic data followed pseudo-second-order. The mechanism was governed by pore diffusion. The equilibrium sorption data were tested by Freundlich, Langmuir, Temkin, Dubinin–Kaganer–Raduskevich, and Halsey isotherm models. The Langmuir monolayer adsorption capacity (Q_max = 181.818 mg/g) is much greater compared to other nano-adsorbents used in sorption of Cu(II). The thermodynamic parameters (ΔH⁰, ΔS⁰, ΔG⁰) revealed a feasible, spontaneous, and endothermic adsorption process. nZVMn has a great potential for effective removal of copper (II) in aqueous solution.     

Study on preparation of modified lubricant containing nano-Schiff base and Schiff base copper complex in W/O microemulsion reactor

A successful preparation of Schiff base and Schiff base copper complex was carried out directly in polar base oil (vegetable oil) using a water/oil microemulsion reactor. The prepared nanometer sized Schiff base and Schiff base copper complex dispersed uniformly and spontaneously in the oil. The nanometer sized particles of the Cu(II) chelate of bissalicylaldehyde-ethylenediamine and the bissalicylaldehyde-ethylenediamine in oil were observed directly by SEM. Owing to a modification of the polar base oil (vegetable oil) by 1 wt % of nano-scale Cu(II) chelate of bissalicylaldehyde-ethylenediamine and 1 wt % of bissalicylaldehyde-ethylenediamine, the last nonseizure load had gone up 40% over that of the original ones. It was verified by AES analysis that steel/steel rubbing pairs went through a selective transfer process under lubrication with the modified polar lubricant. It was suggested that the mechanism of the improvement of tribological characteristics of the modified lubricant was selective transfer effect. An antibacterial activity of the modified lubricant was inspected also. The article is published in the original.     

Sorbent based on aluminum oxide modified with Tiron

The adsorption of Tiron (disodium 4,5-dihydroxy-m-benzenedisulfonate) on aluminum oxide surface was studied, and optimum conditions for the modification of aluminum oxide surface were determined. The sorption of copper(II) on aluminum oxide modified with Tiron was studied. It was shown that the sorption of copper occurs by the mechanism of complex formation with the modifier (Tiron). The composition of the surface complex and its stability constant were determined: Cu: Tiron = 1: 1, logβ = 14.0 ± 0.4. Original Russian Text ? T.I. Tikhomirova, S.S. Kubyshev, A.V. Ivanov, P.N. Nesterenko, 2009, published in Zhurnal Fizicheskoi Khimii, 2009, Vol. 83, No. 7 pp. 1360–1364.     

Study of the effect of oxidative-bisulfite modification of the cotton cellulose on its ion exchange properties

The effect of chemical modification on the sorption properties of cotton cellulose toward Cu(II) and Ni(II) ions was studied. The modification was carried out in two stages: oxidation of cellulose with the formation of dialdehydocellulose, followed by its sulfonation. The optimal conditions for modifying the cellulose to produce a sorbent capable to remove effectively the heavy metal ions from aqueous solutions of corresponding salts were elucidated. The modified sorbent exceeds the native cellulose in the sorption capacity (in terms of sorption maximum) about 3 times, therewith the time of extraction of heavy metal ions is reduced from 45 to 8 min. The high sorption properties are defined by the formation of new sorption sites -SO₃Na along with initially formed -COOH groups on the sorbent surface.     

Carbon,natural and synthetic sorbents for decontamination of objects of ecosystems from pathogenic microflora

Physico-chemical characteristics and sorption activity of carbon, organosilica sorbents and their modified forms towards proteins, possessing specific activity, and cholerae vibrio have been studied. It was found, that carbon materials modified by copper (II) effectively extracts cholerae vibrio (100%) and may be recommended for disinfection of drinking water. Sorption capacity of organosilica sorbents and their modified by copper (II) forms towards pathogenic microflora (E.coli, St.aureus, Ps.aeruginosa) depending on the composition of the sorbents, concentration of the modified reagent, pH of medium have been evaluated. The rows of the increase of sorption of pathogenic microorganisms by synthetic sorbents in water-salt solutions were established: Al(III)<Zn(II)<Cu (II). It was shown that inhibiting effect of modified synthetic organosilica and natural sorbents towards such pathogenic microorganisms as E-coli, St.aureus Ps.aeruginosa and fungus Bacillus pyocyaneus accordingly is equal 80–98%.     

Heavy metal removal from aqueous solution by Pseudevernia furfuracea (L.) Zopf

The present study was carried out in a batch system using a lichen (Pseudevernia furfuracea (L.) Zopf) for the sorption of nickel(II) and copper(II) ions from water. Particularly, the effect of pH, contact time and temperature were considered. Pseudevernia furfuracea exhibited nickel(II) and copper(II) uptake of 49.87 and 60.83 mg/g at an initial pH of 4 and 5-6 at 35 degrees C respectively. Both the Freundlich and Langmuir adsorption models were suitable for describing the biosorption of nickel(II) and copper(II) by the biosorbent. Biosorption showed pseudo first order rate kinetics for nickel and copper ions. Using the equilibrium constant values obtained at 25 and 35 degrees C, the thermodynamics properties of the biosorption (deltaG degrees, deltaH degrees and deltaS degrees) were determined. The biosorption of nickel(II) and copper(II) onto Pseudevernia furfuracea was found to be endothermic.     

Biosorption kinetics, thermodynamics and isosteric heat of sorption of Cu(II) onto Tamarindus indica seed powder

Biosorption of Cu(II) by Tamarindus indica seed powder (TSP) was investigated as a function of temperature in a batch system. The Cu(II) biosorption potential of TSP increased with increasing temperature. The rate of the biosorption process followed pseudo second-order kinetics while the sorption equilibrium data well fitted to the Langmuir and Freundlich isotherm models. The maximum monolayer Cu(II) biosorption capacity increased from 82.97 mg g(-1) at 303 K to 133.24 mg g(-1) at 333 K. Thermodynamic study showed spontaneous and endothermic nature of the sorption process. Isosteric heat of sorption, determined using the Clausius-Clapeyron equation increased with increase in surface loading showing its strong dependence on surface coverage. The biosorbent was characterized by scanning electron microscopy (SEM), surface area and porosity analyzer, X-ray diffraction (XRD) spectrum and Fourier transform infrared (FTIR) spectroscopy. The results of FTIR analysis of unloaded and Cu(II)-loaded TSP revealed that -NH(2), -OH, -C=O and C-O functional groups on the biosorbent surface were involved in the biosorption process. The present study suggests that TSP can be used as a potential, alternative, low-cost biosorbent for removal of Cu(II) ions from aqueous media.     

Synthesis, characterisation and evaluation of polydithiocarbamate resin supported on macroreticular styrene-divinylbenzene copolymer for the removal of trace and heavy metal ions

A new chelating resin was synthesised by the modification of styrene-divinylbenzene (2%) copolymer and incorporation of dithiocarbamate groups. The polydithiocarbamate resin was characterised by elemental analysis, thermal studies and IR studies. The analytical characteristics of the sorbent were established and optimum sorption conditions for Cu, Ni, Pb, Fe, As and Mn determined. The total sorption capacity of the resin was 37 mg g⁻¹ for Ni(II), 35 mg g⁻¹ for Cu(II), 29 mg g⁻¹ for Fe(III) and 23 mg g⁻¹ for Pb(II). The optimum pH for the removal of metal ions was 3-5 for Ni(II), 5 for Cu(II), 4 for Fe(III) and 4-5 for Pb(II). High sorption capacity was observed when compared with other conventional chelating polymers. The sorption kinetics was fairly rapid, as apparent from the loading half time t_1/2 values, indicating a better accessibility of the chelating sites.     

A novel Surface Plasmon Resonance enhanced Total Internal Reflection Ellipsometric application: electrochemically grafted isophthalic acid nanofilm on gold surface

The scope of this study is to modify a Surface Plasmon Resonance (SPR) sensor slide with isophthalic acid to evaluate the possible application on the detection of copper(II) ions in aqueous media by total internal reflection ellipsometry. A gold sensor surface was modified by an electrochemical diazonium reduction modification method. The modified surfaces are characterized with cyclic voltammetry (CV) and ellipsometry. Isophthalic acid monolayer modified gold slides were used for in situ detection of aqueous Cu(2+) solution with the SPR enhanced total internal reflection ellipsometry (SPRe-TIRE) technique. Layer formation, pH dependency of adsorption, sensor response of the SPRe-TIRE and isothermal kinetic parameters were examined. A high dependency on the number of CV cycles in the monolayer-multiple layer transition was observed. The suggested sensor gave a linear response over a wide range of Cu(2+) concentrations. It was also reported that adsorption on the SPRe-TIRE sensor gave Langmuir adsorption model behavior.     

Electrocatalytic oxidation of L-tryptophan using copper hexacyanoferrate film modified gold nanoparticle graphite-wax electrode

A novel copper hexacyanoferrate (CuHCF) film modification on cysteamine (Cys)-gold nanoparticle (AuNp) graphite-wax (GW) composite electrode was achieved for the quantitative determination of L-Tryptophan (L-Trp) at a reduced overpotential of 400mV in comparison with the bare Cys-AuNp-GW composite electrode. This modified electrode exhibited a well resolved pair of redox peaks corresponding to the hexacyanoferrate (II/III) reactions of CuHCF film at a formal potential of 0.65 V at a scan rate of 20 mV s(-1). Electrochemical impedance spectroscopy (EIS) studies with the modified electrode showed a very low charge transfer resistance to the electron transfer kinetics of Fe(II)/Fe(III) reactions. A linear range of 8.5×10(-7) M to 1.2×10(-4) M with a detection limit of 1.85×10(-8) M was achieved for the determination of L-Trp with a sensitivity of 0.1198 μA/μM. The influence of ultrasonication on the stability of the CuHCF film modified electrode was investigated. In addition, the CuHCF film modified electrode displayed an excellent reproducibility towards the real time analysis of L-Trp in commercial milk samples.     

Equilibrium,kinetics and thermodynamics studies of Cd sorption onto a dithizone-impregnated Amberchrom CG-300m polymer resin

Amberchrom CG-300m, a styrene acrylic ester polymer resin, was studied for the first time as sorbent for metal ion sorption in a solid-phase extraction system. The polymer sorbent was modified via impregnation with dithizone to improve its efficiency. Efficiency of the modified sorbent improved by more than 47%. The loading capacity of the resin is 3.2 mg dithizone per gram of sorbent. The mechanisms of Cd(II) sorption from aqueous solutions are presented. Capacity of the modified resin for Cd(II) was investigated in batch experiments as a function of pH, initial metal ion concentration, temperature and time. Maximum capacity of 0.551 mg Cd(II) per gram of sorbent was achieved. The dimensionless separation factor, 0 < R_L < 1, associated with the Langmuir isotherm (at T = 294 K) signifies sorption of Cd(II) was favorable, as do negative values of free energy of sorption (ΔG) at temperatures exceeding 293 K. Sorption was endothermic (ΔH > 0) while ΔS > 0 reflects the affinity of the sorbent towards Cd(II). The pseudo-second order model proved to be the best fit model for Cd(II) sorption kinetics data. Particle-diffusion models suggest sorption follows film as well as pore diffusion mechanisms.     

Sorption of Cu(II) onto vineyard soils: macroscopic and spectroscopic investigations

The sorption of Cu on five vineyard soils was examined via macroscopic and spectroscopic investigations. The composition of the soils was previously determined using X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). X-ray absorption spectroscopy (XAS) was employed to determine the metal environment with regard to the identity and interaction of the nearest atomic neighbors, the bond distances, and the coordination numbers. The five soils present similar sorption properties and there is no XAS evidence that the nature of the soil samples affects the local chemical environment of Cu(II). The kinetics of the Cu sorption reactions is rapid, with the equilibrium loading of Cu on the surface achieving approximately 200 mumol g(-1), i.e., 12.7 mg g(-1). The XAS data indicate that Cu is adsorbed in the form of inner-sphere complexes with first shell CuO parameters of four equatorial CuO bonds equal to 1.93 A and two axial CuO bonds at 2.43 A. This is in accordance with a Jahn-Teller distorted octahedron environment around copper. Our results provide evidence of the complexation of Cu(II) onto soil organic matter coated with an inorganic surface (quartz, clay, and goethite).     

Recovery of heavy metal ions from aqueous solutions using modified organosilicas

Sorption of Cu(II), Pb(II), Cd(II), and Zn(II) from aqueous solutions on two-component organosilicas was studied as influenced by sorbent composition, contact time, ratio of solid and liquid phases, solution pH, nature and concentration of heavy metal ions, and content of modifying agent. The degrees of sorption of these metal ions from aqueous solutions using organosilicas modified with aluminum(III) added into the siloxane matrix or with copper(II) grafted to the sorbent surface layer were compared.     

Copper(II) adsorption on Ca-rectorite, and effect of static magnetic field on the adsorption

Rectorite is a kind of rare clay mineral. In this work, the sorption of Cu(II) on Ca-rectorite and the effects of static magnetic fields on the sorption have been studied. The results from this study indicated that (1) apparent equilibrium for the sorption of copper onto Ca-rectorite is attained within the first hour; (2) magnetic treatment enhances the zeta potential of Ca-rectorite suspensions in the absence of Cu and reduces that of the suspension in the presence of Cu; (3) magnetic treatment promotes the sorption of Cu onto Ca-rectorite, especially at low Cu concentrations; (4) the effects of static magnetic fields decrease the pH of Ca-rectorite suspensions whether they contain copper or not. The effect mechanisms of static magnetic field on the sorption of Cu onto Ca-rectorite were discussed.     

Removal and enrichment of copper ions from aqueous solution by 1,8-diaminonapthalene polymer

Microparticles of poly(1,8-diaminonapthalene) (PDAN) were prepared by chemically oxidative polymerization by (NH₄)₂S₂O₈. The effect of pH on the sorption of Cd(II), Cu(II), Ni(II), Mn(II), Zn(II) and Pb(II) on PDAN was examined by the batch procedure. PDAN showed good sorption capacity and high selectivity towards Cu(II) in comparison with the very popular chelating sorbent Chelex 100 containing iminodiacetic functional groups. The on-line preconcentration system containing the knotted reactor with the obtained polymer was examined for the sorption and desorption processes of copper ions. The applicability of this system was checked by analysis of Cu(II) content in standard reference material (NIST 1643e) and some natural water samples.     

Determination of caesium-137 in water samples using modified carbon microfibers

In this paper, the possibility of caesium sorption on microfibres produced by the Slovak Academy of Sciences was investigated. Sorption capacity limit of sorbent was increased by chemical modification. The binding of Cs to the surface of potassium copper ferrocyanide modified carbon microfibers was demonstrated by SEM–EDX analysis. Statistical comparison of the models showed that the Freundlich isothermal model was more suitable for describing sorption processes. The influence of desorption, pH value, competing ions and water volume were also tested. According to the results, this method seems to be suitable for large-scale caesium separation from contaminated waters.