水下声学滑翔机用于东印度洋声传播特性分析及声源估计

常规实验方法无法同步获取深海大尺度声学和水文数据,水下滑翔机可作为同步观测平台解决该问题.首先利用在东印度洋北部海域水下滑翔机同步获取的声传播和水文实验数据,分析了水下滑翔机的自噪声谱级和实验海区声传播特性,然后推算并修正了滑翔机水下运动轨迹,利用第一影区水下滑翔机接收声传播信号的脉冲多途到达时间差对声源进行测距与定深。潜标接收噪声与滑翔机自噪声谱级对比表明,水下滑翔机在海洋中无动力运动时的系统自噪声接近于潜标观测的海洋环境噪声。滑翔机实测的声传播损失与模型计算结果吻合较好,第一影区水下声源测距定深结果与实际位置较为一致,测距与定深的相对误差均小于5%。利用加载水听器的水下滑翔机可以实现水文环境数据与声学信号的同步观测,对深海声传播特性测量及定位算法研究具有重要意义。      

Interfering modes and an axial wave in an underwater sound channel

Experiments on long-range propagation of low-frequency sound that were conducted starting from the mid-1980s indicate a complex character of propagation in an underwater sound channel, in which a source and a receiver are located close to the channel axis. A burst of energy propagating along the axis follows early arrivals, which are well described by the formulas of geometrical acoustics, in plots of acoustic intensity as a function of propagation time and hydrophone depth. This energy burst cannot be described using geometrical acoustics because of caustics with caustic beaks located near the channel axis. Very complex interference processes occur near these caustics. As the distance from the source grows, the dimensions of the interference vicinity increase and start to overlap producing a peculiar “axial wave.” For an arbitrary two-dimensional underwater sound channel, the axial wave can be represented as a sum of the first normal modes and a residue. This conclusion is based on the use of two representations for an acoustic field. The first of them includes the sum of ray components and an axial wave. The second representation consists of ray addends, the sum of the first normal modes, and a residue. Numerical results are obtained for a canonical profile of sound velocity at the frequency of 200 Hz for the distances of 1600–1650 km.     

Effect of the spectrum of a high-intensity sound source on the sound-absorbing properties of a resonance-type acoustic lining

Experimental results are presented on the effect of both the sound pressure level and the type of spectrum of a sound source on the impedance of an acoustic lining. The spectra under study include those of white noise, a narrow-band signal, and a signal with a preset waveform. It is found that, to obtain reliable data on the impedance of an acoustic lining from the results of interferometric measurements, the total sound pressure level of white noise or the maximal sound pressure level of a pure tone (at every oscillation frequency) needs to be identical to the total sound pressure level of the actual source at the site of acoustic lining on the channel wall.     

陆架斜坡海域上坡波导环境中声能量急剧下降现象及其定量分析

深度较浅的声源其辐射声波在陆架斜坡海域上坡传播时,在斜坡顶端会出现声能量急剧下降现象.利用射线声学模型分析了造成这一现象的原因,并根据抛物方程声场模型计算的深海和浅海平均传播损失定义了"声能量急剧下降距离",定量分析了声源位置对该现象的影响.结果表明:声源深度对"声能量急剧下降距离"影响较大,而声源与斜坡底端水平距离对其影响较小;当声源深度变大时,部分掠射角较小的声线最终能够达到斜坡顶端,致使"声能量急剧下降距离"增大,继续增加声源深度,将导致上坡声能量急剧下降现象消失.利用抛物方程声场模型对陆架斜坡海域上坡声传播进行数值仿真,结合"声能量急剧下降距离"的定义,计算并比较了声源位置不同时该距离的变化,数值计算结果验证了理论分析.     

Source Ranging Using Ensemble Convolutional Networks in the Direct Zone of Deep Water

Using deep convolutional neural networks as primary learners and a deep neural network as meta-learner, source ranging is solved as a regression problem with the ensemble learning method. Simulated acoustic data from the acoustic propagation model are used as the training data. Real data from an experiment in the South China Sea are used as the test data to demonstrate the performance. The results indicate that in the direct zone of deep water, signals received by a very deep receiver can be used to estimate the range of underwater sound source.Within 30 km, the mean absolute error of the range predictions is 1.0 km and the mean absolute percentage error is 7.9%.     

Acoustic comfort evaluation in urban open public spaces

This paper presents the results of an intensive questionnaire survey and objective measurements on soundscape, aiming at the evaluation of acoustic comfort in urban open public spaces. From summer 2001 to spring 2002, 9200 interviews were made for four seasons in 14 urban open public spaces across Europe. The results suggest that the subjective evaluation of the sound level generally relates well with the mean L_eq, especially when the sound level is below a certain level, which is 73 dBA on the basis of this study. However, considerable differences have been found between the subjective evaluation of the sound level and the acoustic comfort evaluation: people tend to show more tolerance in terms of acoustic comfort evaluation. The background sound level has been found to be an important index in evaluating soundscape in urban open public spaces - a lower background level tends to make people feel quieter. Analyses of individual sound elements show that the acoustic comfort evaluation is greatly affected by the sound source type - introducing a pleasant sound can considerably improve the acoustic comfort, even when its sound level is rather high. No significant difference was found among different age groups in terms of subjective evaluation of a sound level, whereas in terms of acoustic comfort, there were significant differences.     

Experimental study of the horizontal correlation of an acoustic field in an inhomogeneous shallow-water waveguide

We present the results of experiments on measuring the characteristics of a wideband low frequency (10–200 Hz) acoustic field in an inhomogeneous shallow-water waveguide in the Barents Sea area. Correlation functions of the signals received by hydrophones of autonomous bottom stations with independent reception, which are horizontally spaced 18 and 112 km apart, are measured. A pneumoacoustic radiator with an overpressure of 10.5 MPa and a volume of 7.5 l was used as a sound source. During the measurements, the signal source was shifted from the line of receivers to distances 10–225 km. The dependences of the correlation coefficient of the received signals on the radiation frequency and the interferometer-baseline length and orientation are studied. It is shown that pronounced local minima in the interval 10–40 Hz due to the difference of the inhomogeneities in the propagation channels and, therefore, the frequency characteristics of the medium are present in the frequency dependences of the correlation coefficient against the background of a monotonic decrease with increasing frequency. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 52, No. 3, pp. 208–215, March 2009.     

Interaction of a spherical acoustic wave with an elastic spherical shell

The interaction of a spherical acoustic wave with an elastic spherical shell is treated analytically. The solution includes the coupling between the acoustic sound field and vibration of the shell with any degree of fluid loading. The formulation for the far-field acoustic pressure is derived in terms of natural spherical wave functions, the properties of the acoustic medium, and the material constants of the shell. The far acoustic field is computed for a thin aluminum shell and several sound source locations over a large range of ka, where k is the wavenumber, and a is the shell radius. It is shown that the acoustic pressure depends significantly on whether the shell is in air or is submerged in water, particularly when the sound source is very near the surface. In air, the sound field of the shell is nearly identical to that of a rigid sphere but, in water, the shell is more compliant, which results in a damped radiation field that is characterized by vibrational resonances throughout the range of frequencies considered. As the sound sources is moved further away from the surface, however, this resonance response decreases very rapidly, and the sound field corresponds more closely to that of the shell in air.     

The application of source methods in estimation of an interior sound field

In earlier studies, one has successfully developed three different source methods (SSM, similar source method; IPSM, internal parallel source method; ISM, internal source method) to estimate radiation and scattering sound fields. All these methods are estimations of exterior sound fields. In the present study, the similar source method is modified to estimate an interior sound field. The modification is to move the imaginary sources outside the boundary surface. In addition, general boundary conditions in terms of acoustic admittance or impedance are considered by introducing the suitable least square error functions. Finally, a two-dimensional interior sound field with alternative boundary conditions is evaluated to simulate sound fields inside a car. The results are in agreement with those of boundary integral method.     

Skirts and barriers for reduction of wayside noise from railway vehicles—an experimental investigation with application to the BR185 locomotive

An experimental investigation to determine the noise reduction efficiency of a number of combinations of vehicle mounted noise skirts and trackside low barriers has been carried out. A 1:4-scale mock-up of the German BR185 locomotive was built. Special care was taken to achieve a realistic representation of the wheel/rail sources, using rotating acoustic source wheels able to imitate the radiation from structural modes and acoustic rail ducts with independently adjustable vertical and lateral slots. The acoustic insertion loss (IL) equivalent to a full-scale microphone position at 25 m distance from the track was determined for the different source components separately. The total IL was obtained from sound power spectra calculated with the TWINS software. Results for the design speed (v=120 km/h) and a case with a lower speed (v=100 km/h) are presented to illustrate the effect of speed on the acoustic IL. The tests were performed in open-air free field conditions. The experimental procedure used in the present investigation gives detailed information on the relative contributions from different source components, which is valuable for further design studies. For the eight combinations reported here, the overall reduction achieved was in agreement with results in the literature. The IL was 2-3 dB(A) for cases with only vehicle skirts and the case with only low track barriers. The combined configurations had insertion losses of 7-13 dB(A).     

An inversion modelling method to obtain the acoustic power of the noise sources in a large factory

A common problem for large factories that wish to decrease their environmental acoustic impact on neighbouring locations is to find out the acoustic power of every noise source. As these factories cannot stop their activity in order to measure each source individually, a procedure is needed to obtain the acoustic powers with the factory under normal operating conditions. Their contribution to the overall sound pressure level at each neighbouring location can then be found and it is possible to calculate the improvements obtained after any modification of the sources. In this paper an inversion modelling method is used to do so. Acoustic powers are obtained by means of field sound pressure level measurements and with the use of a sound propagation software. A careful analysis of the solution has been carried out by simulating errors on the measured data in order to detect possible correlations between the acoustic power of different sources and avoid misleading interpretations of the results. The whole methodology has been applied to a liquid-gas production factory.     

Sound field of an electromagnetic acoustic transducer

The characteristic of radiated sound field excitated within a non-ferromagnetic aluminum by an electromagnetic acoustic transducer consisting of circle-spiral coil and vertical bias magnetic field is studied.This article presents an improved force source model according to the principle of electromagnetic induction.Then the analytic displacement solution of sound field produced by that force source model is deduced.The tangential and normal directivities of shear and longitudinal sounds are calculated numerically and compared with experimental results.Experimental results conform well to the theoretical prediction,which not only shows that the electromagnetic acoustic transducer of this conformation has a good directivity of vertical shear-wave radiation,but also confirms the given force source model is effective to describe the actual physical behavior of the probe.Theoretical and experimental study lays a foundation for optimization design and engineering application of the electromagnetic acoustic probe.     

采用Helmholtz共鸣器与悬臂梁压电换能器的声能采集器研究

针对环境中广泛存在的声能,提出了一种采用Helmholtz共鸣器和悬臂梁压电换能器的声能采集器。Helmholtz共鸣器对入射声压进行放大,放大后的声压引起共鸣器弹性薄壁振动,薄壁的振动传递到压电换能器产生电能输出。建立了带弹性壁的立方形共鸣器的等效集中参数理论模型,并与压电换能器的机电特性结合,分析了声能采集器的声-机-电转换原理,研究了声压、声波频率和负载阻抗对输出功率的影响,研究结果为此类声能采集器的优化设计及工程应用提供了一种可行的方法。实验中,声源通过声波导管输出声能,当共鸣器管口处的声压级为94 dB时,系统实测最大输出功率达240μW。该采集器不仅可作为声能自供能采集器,还可在较远距离为低能耗电子装置进行有源声供能。      

A study of acoustic waves generated by the shock wave of an antihail gun

The processes of propagation of a shock wave generated by an antihail gun are analyzed. It is shown that a shock wave can reach an altitude of 100 km. The measurement results of the time dependence of variation in acoustic intensity and sound frequency for a vertically propagating shock wave are presented.     

负梯度水文环境下海山对声传播的影响

利用一次南海海山环境下的声传播实验数据,研究了负梯度水文环境下海底山对声传播的影响。针对实验数据中的传播损失异常,从射线声学角度给出了合理的解释,表明海底山的存在引起传播损失在距离上剧烈波动。在距离接收阵较近的7.6 km处,声源位于海山斜坡上,斜坡的反射使接收传播损失减小约8 dB,体现出斜坡增强特征。当声源位于海山后,海底山的遮蔽作用使23.8 km处的传播损失增加超过20 dB,不同位置处海山遮蔽效应的差异使传播损失随距离起伏。利用抛物模型对实验环境下的声传播进行了定量仿真,仿真传播损失同实验结果符合,验证了实验数据中海底山的反射和遮蔽作用。此外,对实验环境下海山的遮蔽损失进行分析,发现在不同声源位置处,海山遮蔽损失在特定频带上同频率对数具有线性关系。      

Prediction of intake noise of an automotive engine in run-up condition

It is very important to predict the radiated noise from the engine intake system for the effective noise control and virtual prototyping of in-cavity and outdoor noise of a vehicle. To this end, one should precisely measure the in-duct acoustic source parameters of the intake system, viz., source strength and source impedance. Usually, the noise radiation characteristics need to be expressed as a function of engine speed. In this study, acoustic source parameters of an engine intake system under engine run-up condition were measured by using the direct method. Direct method employed two external loudspeakers, turned on simultaneously, and three microphones for the separation of upstream and downstream wave components. It was noted that the frequency spectra of source impedance hardly changes with the increase of engine speed. Utilizing this fact, source strength under the engine run-up condition was calculated by assuming invariant source impedance. Predicted insertion loss and radiated sound pressure level using the measured source parameters were compared with those of measured data and predicted data using several idealized source models, which have been adopted for the calculations. A reasonably good agreement was observed between measured sound spectra at the intake orifice and predicted one using the measured source data. It was shown that the source data obtained by the present method yielded a far better prediction accuracy than those by the idealized source models.     

Flat-response sound source technique for using the two-microphone method in an impedance tube

In this letter, to improve the acoustic impedance measurement in a tube using the two-microphone method, a sound source technique is developed that is capable of generating incident sound waves of uniform intensity over the entire frequency range of interest. The basic principle is to use a digitally synthesized compensation input signal to achieve a flat response of the sound source provided by one or more loudspeakers. The present sound source technique has been demonstrated to be very effective and easily implemented with the current impedance tube testing systems.     

深海不平海底对声场水平纵向相关性的影响

海底地形变化对与海底作用的声反射区声场空间相关性有重要影响。利用南中国海某深海海域的一次声学实验数据,对深海海底反射区的声场空间相关性进行了分析。实验观测到,在距离声源约29 km至35 km距离范围处,不平海底环境下的水平纵向相关性出现了一些不同于平坦海底环境下的振荡结构,利用射线声学理论分析并解释了这两种不同海底环境产生水平纵向相关差异的原因。结果表明,在深海平坦海底方向一次海底反射到达区,对声场起主要贡献的经过一次海底反射声线间的到达时间差随着水平距离的增加而逐渐减少,从而干涉叠加后的相位差在[0,2π]内发生周期性变化,导致该区域声场的水平纵向相关性随着间距增加呈周期性振荡现象;而不平海底方向的海底小山丘恰对一次海底反射声线的阻挡影响,不仅使得与平坦海底方向相同区域的声传播损失明显增大,而且由于相对更多的本征声线路径的复杂多途干涉,该区域水平纵向相关性不再呈现明显的振荡周期,相关系数也有所下降。研究结果对于分析在深海复杂海底地形环境下的声呐阵列探测性能具有重要意义。      

大气声传播通道的声源当量估计方法

提出了一种基于大气声传播通道的爆炸声源能量估计方法,通过将计算大气声学的传播能量分布结果与大气中传播的声压幅度衰减模型相结合,使用平流层通道与热层通道传播损失能量比例作为修正量,提高了对爆炸声源能量的估计精度。在多次地面爆炸实验得到的数据中,使用观测距离800 km以上且同时存在平流层通道与热层通道的次声接收信号,对比了平流层顶风速修正的能量估计方法与该文提出的基于大气声传播通道的能量估计方法。实验结果验证了相对于传统风速修正的能量估计方法,该方法可显著降低估计误差。     

深海脉冲信号簇到达结构特征及其在水下声源定位中的应用_

为了实现对深海水下声源的定位,对典型深海环境中的脉冲信号到达结构特征进行了理论分析,给出了声源和接收位置位于近海面时到达信号的簇信号形式近似表达式.当声源和接收位置处于近海面深度时,接收到的信号呈簇状结构形式.在提取到达信号中各簇信号到达时间、幅值等特征参数的基础上,提出了一种通过对到达信号中簇信号特征参数匹配搜索进行...