水-甲醇混合体系的超分子复合作用

采用芘作为荧光探针研究了全组成范围水-甲醇混合溶剂的复合结构. 结果表明, 芘探针的极性标尺(I1/I3)随体系中甲醇摩尔分数(xm)的增加呈下降趋势, 其下降速度对xm变化范围具有明显依赖性, 而芘荧光相对量子产率的变化曲线在xm=0.18处呈现出一奇异的极大值. 这些结果揭示了在0.18相似文献   

Preferential oxidation of carbon monoxide on supported gold catalysts

Catalyst precursors containing 1% Au were synthesized by the impregnation of Al₂O₃ and CeO₂-Al₂O₃ supports with an aqueous solution of HAuCl₄ followed by drying, treatment with aqueous ammonia for the removal of chlorine residues, and final drying at 90°C. The oxidation of CO in gas containing ～1 vol % O₂, ～1 vol % CO, 60 vol % H₂, and the balance N₂ on the activated catalysts was studied. In a number of experiments, to 18 vol % water was added to the gas mixture. The activation of precursors by the initial gas was studied. It was found that the prolonged storage of a precursor in air made its activation difficult to perform. The 1%Au/Al₂O₃ catalyst activated by the gas mixture stably operated in the preferential oxidation of CO at room temperature with the occurrence of the reaction in the mode of catalyst surface ignition (a hot spot at the bed inlet) under a change in the feed gas flow rate by a factor of 3. The effect of the presence of additional CO₂ (to 39 vol %) on the oxidation of H₂ was studied: the catalyst activity decreased. Because the reaction of CO₂ reduction to CO did not occur, the effect can be due to the adsorption of CO₂ on gold. The effect of the addition of water vapor to the feed gas was studied with the use of 1%Au/CeO₂-Al₂O₃ as an example. The exo/endo effects related to the adsorption/desorption of water on the catalyst surface were detected upon steam supply and shutoff at a bed temperature of 100–150°C. It was noted that the addition of water vapor to a certain level favorably affected the selectivity (decreased the residual concentration of CO). The boundary water concentration, at which the effect became negative, depended on catalyst bed temperature. The higher was the bed temperature, the greater amount of water could be added until the manifestation of a negative effect.     

Pyrene-cored dendrimer with carbazole derivatives as dendrons: synthesis, properties and application in white light-emitting diode

A new dendrimer using pyrene as core and carbazole derivative as dendron has been successfully prepared via Suzuki coupling reaction. Its chemical structure was confirmed through (1)H NMR, elemental analysis and MALDI-TOF MS methods. The dendrimer synthesized possessed excellent thermal stability with initial decomposition temperature over 470 °C and high fluorescence quantum yield of 86%. The luminescence spectra showed that, relative to the solution sample, the emission peaks of the solid dendrimer film were apparently broadened and red-shifted, indicating the strong π-π stacking effect between the pyrene moieties. By doping 1.5% of the dendrimer in 4,4'-bis[N-(1-naphthyl)-N-phenylamino]biphenyl (NPB), a light-emitting diode device was fabricated in the ITO/NPB/NPB:dendrimer (1.5%)/TPBI/Mg:Ag configuration, which emitted a white color with Commission Internationale de L'Eclairage (CIE(x,y)) coordinates of (0.29, 0.34) and a maximum brightness of 1300 cd m(-2), exhibiting promising potential in white light-emitting diode application.     

四-β-(氨甲基)酞菁锌盐酸盐的合成及光物理光化学性质研究

四-β-(邻苯二甲酰亚胺甲基)酞菁锌(ZnPcP4)与85%水合肼反应得到四-β-(氨甲基)酞菁锌(ZnPcN4,分子式C36H28N12Zn),其盐酸盐为ZnPcN4.HCl。测试合成得到的标题化合物紫外-可见电子吸收光谱,荧光光谱和单线态氧生成速率。标题化合物在水中聚集,在90%1,2-丙二醇/水中主要以单体形式存在。目标酞菁锌配合物在90%DMF/水的中性溶液存在聚集体,在弱酸性条件下,随酸度增大,675 nm处Q带单体吸收峰升高,在DMF/water(10%,V/V)/HCl(1.2 mmol·L-1)溶液中10-5 mol·L-1的酞菁配合物基本上没有聚集;在强酸性条件下,随酸度增大,675 nm处Q带单体吸收峰下降的同时,在713 nm处酞菁单质子化吸收峰强度有所增加。ZnPcN4.HCl在DMF体系中聚集,荧光量子产率和单线态氧量子产率变小,但其在DMF/water(10%,V/V)/HCl(1.2mmol·L-1)体系中主要以单体形式存在,荧光量子产率为0.19,单线态氧量子产率0.58,光敏活性与标准无取代酞菁锌相近。     

THE FLUORESCENCE PROPERTIES OF ORTHO AMINOBENZOATE ANESTHETICS IN DEFINED SOLVENTS AND PHOSPHOLIPID VESICLES

Abstract— The fluorescence properties of three ortho aminobenzoate local anesthetics have been determined in a variety of solvents. Results from these studies have been used to deduce how these drugs interact with phosphatidylcholine bilayers. The emission energy, fluorescence quantum yield and lifetime exhibited a biphasic dependence on solvent polarity. In aprotic solvents, alcohols and in ethanol-water mixtures containing less than 40% water, quantum yields and lifetimes were high (approximately 0.55 and 8.5 ns respectively). In ethanol-water mixtures containing >40% water, the strong fluorescence quenching was primarily due to an increase in the rate of non-radiative deactivation of the excited state. Both the radiative ( k_r ) and non-radiative ( k_nr ) rate constants show a biphasic dependence on solvent polarity. These studies suggest the presence of two singlet excited states for these molecules, a polar singlet excited state, S_1-p and a charge transfer excited state, S_1-ct with the latter predominating in ethanol-water mixture containing >40% water. In egg phosphatidylcholine bilayers, the fluorescence, lifetime and quantum yield are consistent with the view that these drugs are localized within the lipid head group region where the charge-transfer excited state can be stabilized by intermolecular hydrogen bonding.     

Nanostructured Polymeric Micelles Carrying Xanthene Dyes for Photodynamic Evaluation

It was evaluated the properties of the xanthene dyes Erythrosin B, Eosin Y and theirs Methyl, Butyl and Decyl ester derivatives as possible photosensitizers (PS) for photodynamic treatments. The more hydrophobic dyes self‐aggregate in water/ethanol solutions above 70% water (vol/vol) in the mixture. In buffered water, these PS were encapsulated in Pluronic polymeric surfactants of P‐123 and F‐127 by two methodologies: direct addition and the thin‐film solid dispersion methods. The thin‐film solid method provided formulations with higher stabilities besides effective encapsulation of the PS as monomers. Size measurements demonstrated that Pluronic forms self‐assembled micelles with uniform size, which present slightly negative surface potential and a spherical form detected by TEM microscopy. The ester length modulates xanthene localization in the micelle, which is deeper with the increase in the alkyl chain. Moreover, some PS are distributed into two populations: one on the corona micelle interface shell (PEO layer) and the other into the core (PPO region). Although all PS formulations show high singlet oxygen quantum yield, promising results were obtained for Erythrosin B esters with the hydrophobic P‐123, which ensures their potential as drug for clinical photodynamic applications.     

Synthesis and hydrolysis of a cis-chlorohydrin derived from a benzo[a]pyrene 7,8-diol 9,10-epoxide

(+/-)-7beta,8alpha-Dihydroxy-9beta,10beta-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene (DE-1) undergoes reaction with anhydrous HCl in dioxane to yield predominantly ( approximately 94%) a single chlorohydrin. This chlorohydrin was assigned structure 9, in which the chloro goup at C-10 is located cis to the C-9 hydroxyl group, on the basis of its (1)H NMR spectrum. This result is in contrast to the reaction of a diastereomeric benzo[a]pyrene 7,8-diol 9,10-epoxide (DE-2) with HCl, which yields only trans-chlorohydrin 8. The hydrolysis of cis-chlorohydrin 9 in 10:90 dioxane-water solutions yields the same ratio of tetrols ( approximately 89% cis/11% trans) as that formed by acid-catalyzed hydrolysis of DE-1. This result again contrasts with the hydrolysis of trans-chlorohydrin 8, which undergoes hydrolysis to give tetrols in a ratio different from that from acid-catalyzed hydrolysis of DE-2. A marked common ion rate depression in the hydrolysis of cis-chlorohydrin 9 is observed, which shows that hydrolysis proceeds via an intermediate carbocation that has a sufficient lifetime to be trapped by external chloride ion. The observation that DE-1 reacts with HCl to give mainly the cis-chlorohydrin is rationalized by quantum chemical calculations that suggest that the cis-chlorohydrin is more stable than the epimeric trans-chlorohydrin.     

磷杂Fries重排反应用于合成2-芘基膦化合物

芘具有良好的刚性平面和高的荧光量子产率,是有机光电材料研究中重要的结构单元,由于其电子结构特点,芘的2位官能团化非常困难.利用易得的1-芘醇和H-亚磷酸酯或有机磷氯化合物合成了一系列1-芘基磷酸酯化合物,经磷杂Fries重排反应在温和条件下实现了芘2位的磷酰化,并得到相应的2-磷酰基芘衍生物.该类化合物还为新型含磷共轭化合物芘并1,3-氧杂磷杂环戊二烯的研究奠定了基础.本研究不但为芘类化合物的官能团化提供了一个新方法,而且为新型含磷共轭化合物的设计与合成开辟了新路线,并对合成的新型芘类化合物的紫外吸收和荧光发射等性质进行了初步测定.     

Formation of nanostructured polyaniline by dopant-free oxidation of aniline in a water/isopropanol mixture

Nanostructured polyaniline (PANI) was synthesised by the oxidation of aniline in a water/ isopropanol (propan-2-ol, IPA) (50 vol. %) mixture, without added acid, using ammonium peroxydisulfate (APS) as an oxidant. Influence of the IPA co-solvent and the reaction time on the molecular structure, morphology and properties of synthesised PANI samples was studied by FTIR, Raman, and UV-VIS spectroscopies, scanning and transmission electron microscopies (SEM and TEM), and conductivity measurements. The course of the reaction was followed by monitoring changes in the temperature and acidity of the reaction medium. The results were compared with those obtained for PANI prepared in water without IPA under the same reaction conditions. The importance of the solvation effects, dielectric constant of the solvent, and the enthalpy of mixing of IPA with water on the course of the polymerisation reaction and on the properties of polymeric products in the water/IPA medium in comparison with those in water was pointed out.     

Characterization of surface NH3+Cl- groups on poly(styrene-co-Boc-aminostyrene) microspheres obtained by controlled acidic treatment

Different samples of aminated latex of poly(styrene-co-Boc-aminostyrene) microspheres with mean diameters varying from 0.7 to 1.0 microm were prepared by dispersion copolymerization of styrene (ST) and Boc-aminostyrene (Boc-AMST). The copolymer compositions determined by nuclear magnetic resonance (1H NMR) were Boc-AMST/ST 6.9/93.1 mol/mol % (BOC7 sample) and Boc-AMST/ST 31.3/68.7 mol/mol % (BOC30 sample). The average molecular weights determined by gel permeation chromatography were 126 kDa (BOC7 sample) and 51 kDa (BOC30 sample). The latex containing NH-carbo-tert-butoxy groups (NH-Boc) were treated with 2 M HCl in isopropyl alcohol/water (1:1 vol/vol), at 50 degrees C for 3, 6, 9, 24, and 30 h, in order to control the extent of deprotection reaction of the NH-Boc. The deprotection reaction resulted in the formation of NH3+Cl- groups on the particle surfaces. The kinetic of the deprotection reaction was investigated by 1H NMR analyses and the yield varied from 20 to 40%. The resulting -NH3+Cl- groups on the microsphere surfaces were examined, in particular, by electron spectroscopy imaging (ESI) using an energy-filtered transmission electron microscope (EFTEM) that clearly demonstrated the presence of Cl on the particle surfaces. Scanning electron photomicrographs recorded for the above samples showed that the particle morphology was maintained after the acidic treatment.     

A new luminescent terbium 4-methylsalicylate complex as a novel sensor for detecting the purity of methanol

A new dinuclear terbium complex [Tb(2)(4-msal)(6)(H(2)O)(4)]·6H(2)O (1) (4-msal = 4-methylsalcylate) was synthesized. Its structure was determined by single crystal X-ray diffraction, and the complex was characterized by PXRD, FT-IR, fluorescence, TGA and DTA. Complex 1 exists as discrete molecules that are linked by extensive O-H … O hydrogen bonds into a 3D network. The luminescence lifetimes of 3 μM methanol solution and solid sample of 1 are 1.321 and 1.009 ms, respectively. The quantum yield of solid sample is 6.0%. The luminescence quenched more than 50% when 3% (vol/vol) different impurities (acetone, acetonitrile, chloroform, dichloromethane, dioxane, DMF, DMSO, ethanol, ether, ethyl acetate, glycol, H(2)O, hexane, TEA, THF and toluene or their mixture) were added. The inverse linear relationship between the Lg value of fluorescence intensity and the volume ratio of the minor component (to a maximum of 20%) is interpreted in terms of LgI = a-bX (I: luminescence intensity; X: volume ratio of impurities in methanol; a, b are constants). So 1 is a potential luminescent sensor for analyzing the purity of methanol.     

Emulsion copolymerization of vinyl acetate and butyl acrylate in the presence of fluorescent dyes

This article describes our first experiments for preparing dye‐labeled latex particles by the emulsion copolymerization of a 4/1 (w/w) mixture of vinyl acetate‐butylacrylate (VAc‐BA). We discuss the synthesis of acrylate derivatives of phenanthrene, anthracene, and pyrene [9‐acryloxymethyl phenanthrene ( 7 ), 9‐acryloxymethyl‐10‐methyl anthracene ( 8 ), and 1‐acryloxymethyl pyrene ( 10 )] and an allyl ether derivative of anthracene [9‐allyoxymethyl‐10‐methyl anthracene ( 9 )]. Although the phenanthrene derivative 7 gave latex particles with high monomer conversion and good dye incorporation, the pyrene acrylate and both anthracene comonomers strongly inhibited the free‐radical reaction. To assist our search for a dye that would serve as a useful energy acceptor for phenanthrene and without suppressing VAc‐BA polymerization, we also examined batch emulsion polymerization in the presence of a variety of dye derivatives—substituted anthracenes, acridines, a coumarin, and two benzophenone derivatives. All of the anthracene derivatives, as well as acridine, strongly inhibited monomer polymerization. The coumarin dye 7‐hydroxy‐4‐methyl coumarin ( 22 ) that had only limited solubility allowed more than 90% monomer conversion. Most promising were 2‐hydroxy‐5‐methyl benzophenone ( 23 ) and 4‐N,N‐dimethylamino benzophenone ( 24 ) that at 1 mol % in the monomer mixture permitted virtually quantitative monomer conversion to latex. 4′‐Dimethylamino‐2‐acryloxy‐5‐methyl benzophenone ( 25 ) copolymerized well with the VAc‐BA mixture, yielding latex particles in high yield and with a narrow size distribution. These dyes appear to be useful acceptor dyes for energy‐transfer experiments with phenanthrene. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1594–1607, 2002     

二氧化硒催化过氧化氢氧化萘丙醛制萘丙酸的研究

萘丙酸((±)-2-(6-甲氧基-2-萘基)-丙酸)的右旋体有解热镇痛特效,国内生产中由萘丙醛氧化成酸系采用多伦试剂,耗费大量硝酸银。我们采用过氧化氢作氧化剂,结果表明,制得的产品纯度高,而且成本低。     

Water‐Assisted Size and Shape Control of CsPbBr3 Perovskite Nanocrystals

Lead‐halide perovskites are well known to decompose rapidly when exposed to polar solvents, such as water. Contrary to this common‐place observation, we have found that through introducing a suitable minor amount of water into the reaction mixture, we can synthesize stable CsPbBr₃ nanocrystals. The size and the crystallinity, and as a result the band gap tunability of the strongly emitting CsPbBr₃ nanocrystals correlate with the water content. Suitable amounts of water change the crystallization environment, inducing the formation of differently shaped perovskites, namely spherical NCs, rectangular nanoplatelets, or nanowires. Bright CsPbBr₃ nanocrystals with the photoluminescence quantum yield reaching 90 % were employed for fabrication of inverted hybrid inorganic/organic light‐emitting devices, with the peak luminance of 4428 cd m^?2 and external quantum yield of 1.7 %.     

The specific feature of photochemical processes in molecules of 3,3′-dialkylthiacarbocyanines in binary solvent mixtures

The effect of the composition of the dimethyl sulfoxide (DMSO)-toluene mixture on the photochemical processes of 3,3′-diethylthiacarbocyanine (DETCC) iodide and 3,3′-dimethylthiacarbocyanine (DMTCC) chloride was studied. In the mixtures with the DMSO content more than 20 vol %, DETCC iodide and DMTCC chloride molecules are characterized by a high efficiency of both trans → cis photoisomerization and fluorescence, in contrast to intersystem crossing to the triplet state. With decreasing the DMSO content to 3 vol %, the relative quantum yield of DETCC iodide intersystem crossing increases by two orders of magnitude, which is accompanied by a decrease in the lifetime of DETCC iodide triplet molecules from 1.1 × 10^?4 to 2.4 × 10^?7 s and a decrease in the yield of the cis-isomers. To explain the results, the concepts of “external heavy atom (iodide) effect” and hyperfine coupling (HFC mechanism) in radical pairs that could be formed via electron transfer between the iodide and an excited dye molecule were used.     

Copolymer-supported heterogeneous organocatalyst for asymmetric aldol addition in aqueous medium

In the current study, a convenient and simple way is presented to synthesize a novel type of supported heterogeneous organocatalyst in 21-81% yield by the copolymerization of 9-amino-9-deoxy-epi-cinchonine organocatalyst with acrylonitrile using AIBN as radical initiator. The chemical compositions (x/y) and weight-average molecular weights of copolymers 1a-d were determined by (1)H NMR and GPC analysis respectively. Their porous and layered structure, and surface morphology were characterized by nitrogen adsorption-desorption, XRD and TEM. In the asymmetric aldol addition of p-nitrobenzaldehyde to cyclohexanone and 1-hydroxy-2-propanone in water, all the supported organocatalysts 1a-d afforded excellent isolated yields (90.2-94.7%) and stereoselectivities (96.8-97.8%ee anti, anti/syn = 91/9). The highest catalytic property (96% yield, anti/syn = 90/10 and 99%ee anti) in water as the sole solvent was achieved under the optimized conditions. Compared with cyclohexanone, cyclopentanone and acetone showed the less desired enantioselectivities in the same aldol reactions. At the end of the aldol reaction, the copolymer-supported organocatalyst 1a was readily recovered in 95-98% yield from reaction mixture by simple filtration using an organic membrane. Even in the fifth run, there was no significant loss in catalytic activity and stereocontrol (94.3% yield, 97.2%ee anti, anti/syn = 90/10). After continuous reuse five times, there was some drop in catalytic activity and stereoselectivity.     

Graphdiyne:Structure of Fluorescent Quantum Dots

Graphdiyne (GDY) as an emerging two‐dimensional carbon allotrope exhibits excellent performance in energy chemistry, catalytic chemistry, optoelectronics, electronics, etc. because of the unique structure combining an sp‐ and sp²‐hybrid carbon network. However, the poor solubility of pristine GDY is a major obstacle to its applications in many fields. Proposed here is a facile strategy to control the preparation of GDY quantum dots (GDY‐Py QDs), in which pyrene groups are covalently linked to GDY by using a Sonogashira cross‐coupling reaction. The as‐prepared GDY‐Py QDs, with an average diameter of about 3±0.1 nm, show superior dispersibility in many organic solvents and water. The GDY‐Py QDs display not only bright fluorescent with a high relative quantum yield (QY) of 42.82 %, but they are also well‐behaved as contrast agents in cell imaging. The GDY‐Py QDs are bestowed with high stability and non‐cytotoxicity, and exhibit long fluorescent times, and have potential for optical imaging and biomedical applications.     

Increased activity of in situ catalysts for alkyne metathesis

[reaction: see text] Reaction of an enyne (1,1-diphenyl-pent-1-ene-3-yne) with a preheated mixture of Mo(CO)6/4-chlorophenol/3-hexyne at 130 degrees C furnished 1,1,6,6-tetraphenylhex-1,5-diene-3-yne in an 80% yield. If the starting material was heated with a mixture of Mo(CO)6 and 4-chlorophenol under identical conditions, no reaction was observed.     

Demulsification of produced liquid from surfactant-polymer flooding

Treatment of the produced fluid obtained by surfactant-polymer (SP) flooding is difficult because of the stabilizing effects exhibited by surfactants and polymers on oil-in-water emulsions. For the produced fluid from Xinjiang oilfield, YH-1 (a mixture of 603 and YB-990) showed promising demulsification effects. When the dosage of YH-1 was 20?mg/L at 323?K, the dewatering efficiency reached no less than 72% even when both surfactant and polymer contcentrations were 1200?mg/L. Experimental results showed that YH-1 reduces the water content in crude oil to no more than 20%, which meets the commercial requirements before entering the electronic field. Demulsification performed by thermal-chemical and electric field treatments further reduced the water content in crude oil to less than 2.0%.     

无膦配体氧化钯催化合成树形低聚苯

树形低聚苯;交叉偶联;无膦配体氧化钯催化合成树形低聚苯