固化剂对双介晶基元液晶环氧树脂相结构和热性能的影响

以芳香二胺（SAA）、酸酐（THPA）和叔胺（DMAP）为固化剂,固化偶氮类双介晶基元液晶环氧树脂,采用偏光显微镜和X射线衍射研究了固化剂对液晶热固体相结构产生的影响。DMAP催化环氧自聚固化,有利于液晶分子的有序排列,易于形成梯形结构,可以得到近晶相的固化产物。SAA在较低温度下固化时也得到近晶相结构,但在较高温度固...     

环氧树脂/液晶聚合物体系的形态、力学性能和热稳定性

合成了一种端基含有活性基团的热致性液晶聚合物 (LCPU) ,用其改性环氧树脂CYD 12 8 4 ,4′ 二氨基二苯砜 (DDS)固化体系 ,对改性体系的冲击性能、拉伸性能、弯曲性能、弹性模量、断裂伸长率、玻璃化转变温度Tg、热失重温度TG与LCPU含量的关系进行了探讨 ,对不同种类液晶化合物改性CYD 12 8 DDS体系效果进行了比较 ,用扫描电镜 (SEM)研究了材料断面的形态结构 .结果表明 ,LCPU的加入可以使固化物的力学性能和热稳定性提高 ,改性后材料断裂面的形态逐渐呈现韧性断裂特征     

热致性液晶聚合物的种类对液晶/环氧树脂共混物固化反应动力学的影响

采用等温DSC固化动力学研究方法,用自催化动力学模型对反应型热致性液晶聚合物/环氧树脂共混体系进行研究.结果表明,EP/DDS未改性体系,在α＜40%范围遵循自催化反应机理;EP/DDS/LCPU共混改性体系,在α＜60%范围遵循自催化动力学反应机理,而且自催化反应速率和非催化反应速率均大于未改性体系,表明反应型热致性液晶聚合物的活性基团对固化反应起到了催化促进作用;EP/DDS/PHBHT共混改性体系能够较好符合n级反应机理,固化反应的活化能较大,说明没有反应基团的液晶聚合物(PHBHT)对固化反应无明显促进作用.     

橡胶活性官能团对增韧环氧树脂动态力学性能的影响

用动态扭摆法测试聚丙烯酸丁酯橡胶增韧环氧树脂的动态力学行为,研究在环氧树脂低固化度和高固化度时,橡胶活性官能团种类(环氧基官能团与羧基官能团)和数量(官能度)对其影响。研究体系中橡胶玻璃化转变温度(Tg)的移动大小,与橡胶和基体树脂健合程度之间的关系。     

热致侧链型高分子液晶的合成,结构和相行为

高分子液晶(LCP)是当前高分子科学中颇有吸引力的一个研究领域。早在六十年代,高分子液晶现象就在芳香聚酯的熔融加工中存在,但真正认识到液晶现象是1974年,十多年来,由于高分子的液晶潜在的应用前景,有关的研究报道日益增多。 按照麻省大学化工系Lenz教授的看法,我们目前对高分子液晶的认识水平,还处于相当低的水准,与40年代对高分子结晶形态的认识同一。Lenz教授的这一看法,带有一定的偏面性。从已报道的大量文献来看,合成、表征及其性能测试方面的报道占主要地位,而理论方面的探讨性文章还不多见,其中较有代表性的是Flory的格子模型理论和     

新型环氧树脂基液晶光定向层材料的合成与性能研究

经双酚A型环氧树脂与苯胺缩聚反应,制备含有羟基的先驱聚合物EP-AN,通过EP-AN上羟基与肉桂酰氯的酯化反应,制备了侧链带有肉桂酸酯基团的光敏聚合物EP-AN-CI.用核磁共振(1HNMR)、傅里叶红外光谱(FTIR)和热分析等手段确定了上述聚合物的结构与性能.用FTIR等方法表征了EP-AN-CI的光交联反应.经线性偏振光聚合技术(LPP)处理聚合物EP-AN-CI膜制备成液晶定向层,通过装配液晶盒和偏光显微镜观察表明,所制备的定向层具有很好的定向能力,该聚合物是一类具有潜在应用价值的新型液晶光定向层材料.     

聚离子液体修饰碳纳米管及其对环氧树脂力学性能的影响

为改善多壁碳纳米管(MWCNTs)在环氧树脂(EP)中的分散性和界面性质,以1-乙烯基-3-丁基咪唑六氟磷酸盐([VBIM]PF6)为单体合成聚离子液体(PIL),用于MWCNTs的表面改性.用热重分析(TG),拉曼光谱(Raman)和扫描电镜(SEM)对改性碳纳米管(PIL-CNTs)进行了表征.结果表明,PIL可吸附在MWCNTs表面且不改变MWCNTs的电子结构.与原始MWCNTs相比,PIL-CNTs在丙酮中的分散性更好.在EP中加入0.5 wt%的PIL-CNTs,以4,4'-二氨基二苯甲烷(DDM)为固化剂制备环氧树脂固化物.动态力学(DMA)研究表明,PIL-CNTs提高了EP的储能模量,玻璃化温度比纯EP和MWCNTs/EP分别提高了5.6℃和3.3℃;PILCNTs/EP的拉伸强度,弯曲强度和冲击强度较纯EP分别提高了35.2%,26.4%和45.0%.拉伸断面的SEM可看出PIL-CNTs在复合材料中的分散性和与环氧树脂基体的界面结合力均优于原始MWCNTs.     

吸水过程对环氧树脂的动态松弛行为的影响

以酚醛树脂和乙酸、正丁酸和苯乙酸酯化的酚醛树脂固化邻甲酚环氧树脂.应用称重法、示差扫描量热法(DSC)和动态机械分析法(DMA)等手段研究吸水过程对环氧树脂的动态松弛行为的影响.结果表明,吸水过程对酚醛树脂和酯化酚醛树脂固化体系的动态松驰行为有显著的影响,这是由于两种体系中侧基对吸水过程及与水分子的相互作用不同所致.     

液晶环氧树脂及一系列液晶固化促进剂的合成及其固化行为研究

合成了一种联苯型液晶环氧化合物(LCE),和一系列含有不同长度柔性亚甲基联苯介晶单元的环氧树脂固化促进剂(LCECAn,n=2,4,6)。利用傅立叶变换红外光谱(FTIR)和核磁共振(1HNMR)对化合物的结构进行了表征。此外,利用DSC考察了加入LCECAn的LCE/DDM固化体系的反应活性。结果表明,LCECAn能促进LCE/DDM固化体系的固化反应,分别加入10%LCECA2、10%LCECA4和10%LCECA6后,LCE/DDM体系的固化峰顶温度由150℃分别降低到136℃、139℃和137℃。     

环氧树脂共混物相结构的调控方法研究

研究了环氧树脂(E51)/聚砜(PSF)共混物相结构的控制方法.通过抑制相分离、控制预固化的反应程度控制环氧树脂的分子量,固化后可获得不同的共混物相结构.依据红外测定的固化反应程度设定固化程序,可有效控制共混物的相结构.加入促进剂三氟化硼-乙基胺(BTF-EA)可提高固化反应速度,使相分离结构在早期被抑制,以获得小微区的相结构.     

刚性非共平面的环氧树脂体系的制备及性能研究

基于新型的刚性非共平面二胺4',4″-(2,2-diphenylethene-1,1-diyl)dibiphenyl-4-amine(TPEDA)环氧树脂固化剂,采用动态机械分析(DMA)、热机械分析(TMA)和阻抗分析全面研究了其固化环氧树脂(E51)所制备的环氧固化物(E51/TPEDA)的热、机械和介电等综合性能.并与商业化的固化剂2,4-二氨基二苯甲烷(DDM)、4,4二氨基二苯砜(DDS)固化环氧树脂体系进行对比,结果表明由于TPEDA特有的刚性非共平面结构的引入,E51/TPEDA体系表现了较高的玻璃化转变温度、拉伸强度和较低的热膨胀系数、介电常数与损耗等优异物理性能.因此,基于新型非共平面二胺的环氧树脂固化物表现了在电子封装领域的潜在应用前景.     

Oligo-fluoropolymer Modified Cycloaliphatic Epoxy Resins with Excellent Compatibility,Waterproof and Mechanical Properties for LED Encapsulation

An oligo-fluoropolymer(PFM) with functional cycloaliphatic epoxy and fluorinated groups was obtained via free radical polymerization and applied to the modification of cycloaliphatic epoxy resins(CE). The chemical structure of PFM was characterized by Fourier transform infrared(FTIR) spectroscopy, gel permeation chromatography(GPC) and nuclear magnetic resonance(NMR) spectroscopy, and the effects of different PFM concentrations(0.5%—6%, mass fraction) on the thermal resistance, mechanical properties, surface dewettability, light transmission, refractive index and various cured polymer properties were studied in detail. The DSC and TGA results demonstrate that the modified epoxy resins possess a higher thermal resistance than the neat epoxy resin. The improvements in the surface dewettability and water resistance are caused by the high crosslinking density and the enrichment of the oligo-fluorinated random copolymers dispersed in the matrix. The fracture surface morphologies of the thermosets were investigated by scanning electron microscopy(SEM) and transmission electron microscopy(TEM). It was observed that the optical transmittance of the composites was maintained even though microphase separation occurred during the curing process. With respect to the corresponding properties of the neat epoxy resins, the 2 phr(parts per hundreds of resin) PFM thermoset exhibited relatively better comprehensive properties, making the cured material a good candidate for light-emitting diode(LED) encapsulation.     

Mechanical and Thermal Properties and Morphology of Epoxy Resins Modified by a Silicon Compound

A silicon compound (GAPSO) was synthesized to modify the diglycidyl ether of bisphenol-A (DGEBA). The chemical structure of GAPSO was confirmed using FT-IR, ²⁹Si NMR and GPC. The mechanical and thermal properties and morphologies of the cured epoxy resins were investigated by impact testing, tensile testing, differential scanning calorimetry and environmental scanning electron microscopy. The impact strength and tensile strength were both increased by introducing GAPSO, meanwhile the glass transition temperature (T_g ) was not decreased and the morphologies of the fracture surfaces show that the compatibility of GAPSO with epoxy resin was very good and the toughening follows the pinning and crack tip bifurcation mechanism. The high functional groups in GAPSO can react during the curing process, and chemically participate in the crosslinking network. GAPSO is thus expected to improve the toughness of epoxy resin, meanwhile maintain the glass transition temperature.     

反应性聚碳酸酯/环氧树脂体系的玻璃化转变行为及力学性能

增韧;反应性聚碳酸酯/环氧树脂体系的玻璃化转变行为及力学性能     

Effect of Chemical Treatment on the Mechanical and Water Absorption Properties of Coir Pith/Nylon/Epoxy Sandwich Composites

Multilayered coir pith/nylon fabric/epoxy hybrid composites were fabricated by the hand lay-up technique. Coir pith was subjected to chemical treatment before processing and the volume fraction of coir pith was maintained in the range of 60–65%. The effect of treatment was analyzed by SEM and optical microscopy. The effects of layering and treatment on the mechanical and water transport nature of composite were analyzed. The mechanical properties of the composite decreased on exposure to water. However, the retention of impact strength increased with chemical treatment of coir pith.     

Effect of Epoxy Resin on the Thermal,Mechanical and Rheological Properties of Polybutylene Terephthalate/Glycidyl Methacrylate Functionalized Methyl Methacrylate-butadiene Blend

Epoxy resin was used to modify polybutylene terephthalate(PBT) and glycidyl methacrylate functionalized methyl methacrylate-butadiene(MB-g-GMA) blend. Results show that MB-g-GMA dispersed in PBT matrix uniformly and PBT/MB-g-GMA/epoxy blends reveal good compatibility. However, the added epoxy resin restricted the mobility of PBT macromolecular chains during the growth process of the crystal, which reduced the final crystallinity of PBT. The PBT/MB-g-GMA blend containing 1%(mass fraction) epoxy resin exhibited good mechanical properties. For example, the notched impact strength of the PBT/MB-g-GMA blend with 1%(mass fraction) epoxy resin was about 2 times that of PBT/MB-g-GMA blend. Sanning electron microscope(SEM) results show that the shear yielding of the PBT matrix and the cavitations of rubber particles were the major toughening mechanisms. The chemical reaction between PBT and epoxy resin induced the high complex viscosity and storage modulus of PBT/MB-g-GMA blend.