二维分子的原子不对称性研究

基于分子形状的二进制编码提出了权原子和法来描述原子的不对称环境, 其中权原子和是以相反的方向环绕分子所得原子不对称环境的量度, 分子中一个原子的权原子和与其镜像分子中相应原子的权原子和的大小相等, 符号相反. 权原子和不仅适用于手性分子, 还能描述非手性分子中原子的不对称性. 与Randic′提出的原子和进行比较表明, 权原子和比原子和具有更好地区分能力, 因此, 权原子和能够更好地表征原子的不对称性.     

原子量之"变"

原子量是最为基础的科学概念之一,"国际纯粹与应用化学联合会(IUPAC)"之"同位素丰度和原子量委员会(CIAAW)"每两年会修订并发布一次原子量。自2009年起,IUPAC宣布某些元素的原子量不再是常数,这些元素的标准原子量为区间值。为方便使用,对于这些元素,给出一个合理的单一数值,称为常规原子量。何为标准原子量?何为常规原子量?为何某些元素的原子量出现区间值?依据原子量数值的特性,元素可以分为几大类?本文在介绍最新元素周期表中原子量的特点之后,简述原子量测定、标准确定、概念演变的发展历史,讨论原子量的修订与变化等问题。     

Factors influencing deformation stability of binary glasses

A possible mechanism of strain accommodation in large deformation of glasses is crystallization; deformation stability is a measure of the resistance of glasses to crystallization. We study the effect of atomic size ratio and atomic stiffness parameter (related to the curvature of the interatomic potential) on deformation stability of binary glasses using molecular static simulations. The deformation stability of a glass is found to increase with increasing atomic size ratio and magnitude of the atomic stiffness, which is proportional to the bulk modulus of the pure crystalline system, as well as the ratio of atomic stiffnesses of constituent atoms. To understand the role of the above parameters on deformation stability, misfit energies of randomly substituted solid solution fcc crystals and glasses are compared for various atomic size ratios and atomic stiffness values. Unlike in fcc solid solution, the misfit energy of binary glasses is found to be insensitive to the atomic size ratio. It is also found that the packing fraction of glasses is insensitive to the atomic size ratio, consistent with the above result. Beyond a critical atomic size ratio, the misfit energy of fcc solid solution exceeds the energy of the glass, thus making the amorphous state completely stable to deformation induced crystallization. Our analysis shows that critical atomic size ratio decreases with increasing atomic stiffness which leads to an increase in the deformation stability of glasses.     

石英玻璃高温分子动力学模拟中的势函数

根据石英玻璃高温下的分子动力学研究, 分析了势函数中多体势在高温应用下的局限性, 认为离子型对势在模拟石英玻璃高温结构方面优于多体势. 在原子电荷转移方面, 计算并分析了Si和O原子电荷大小对计算原子自扩散系数的影响, 发现用原子电荷转移较少的Morse势函数计算的原子自扩散激活温度比BKS势函数计算的低, 而且在同一温度下, 自扩散系数的计算值也随着原子电荷的减小而增大, 因此, 较小的原子电荷转移应该有利于石英玻璃在高温下的动力学性能的研究.     

元素原子量测量及其演进

2019年是门捷列夫发现元素周期表第150周年。本文从原子量概念的提出、原子量测量技术的发展、原子量测量的中国贡献、原子量新的表述形式的出现等方面系统回顾了在过往两百多年里元素原子量的发展历史。     

肿瘤细胞的原子力显微术成像及表征研究

本文简单介绍了原子力显微镜的发展史,以及原子力显微镜的工作原理、工作模式、活细胞在生理状态下的成像方式等,特别介绍了生物型原子力显微镜、高速原子力显微镜在生物学领域的研究及应用。原子力显微镜在扫描速度、扫描范围、扫描精度方面的不断改进将为肿瘤细胞学研究提供源源不断的动力。本文着重阐述了原子力显微术在肿瘤领域的研究进展,包括原子力显微镜在肿瘤细胞形貌学特性、硬度、粘弹性方面的研究现状,并对原子力显微镜在肿瘤诊断及抗肿瘤药物研发方面的应用前景进行了展望。     

Atomic dipole moments calculated using analytical molecular second-moment gradients

We have implemented analytical second-moment gradients for Hartree-Fock and multiconfigurational self-consistent-field wave functions. The code is used to calculate atomic dipole moments based on the generalized atomic polar tensor (GAPT) formalism [Phys. Rev. Lett. 62, 1469 (1989)], and the proposal of Dinur and Hagler (DH) for the calculation of atomic multipoles [J. Chem. Phys. 91, 2949 (1989)]. Both approaches display smooth basis-set convergence toward a well-defined basis-set limit and give reasonable electron correlation effects on the calculated atomic properties. However, the atomic charges and atomic dipole moments obtained from the GAPT partitioning scheme are unable to provide even qualitatively meaningful molecular quadrupole moments for some molecules, and thus the atomic multipole moments calculated in this scheme cannot be considered well suited for analyzing the electron density in molecules and for calculating intermolecular interaction energies. In contrast, the DH approach gives atomic charges and dipole moments that by definition exactly reproduce the molecular quadrupole moments. The approach of DH is, however, restricted to planar molecules and thus suffers from not being applicable to molecules of arbitrary shape. Both the GAPT and DH approaches give rather poor results for octupole and hexadecapole moments, indicating that at least atomic quadrupole moments are required for an accurate representation of the molecular charge distribution in terms of atomic electric moments.     

原子荧光光谱技术在我国发展及标准化应用现状

简单介绍了原子荧光光谱技术的建立及其在国内的发展历程,重点介绍了蒸气发生-原子荧光光谱(VG-AFS)仪在我国的技术研究、仪器研制及应用;详细总结了蒸气发生-原子荧光光谱(VG-AFS)法在我国标准化方面的研究.我国在多通道原子荧光光谱仪、原子荧光形态分析仪等关键技术及其应用等方面取得了开创性的研究成果,并形成了一系列...     

原子吸收光谱法在烟草行业中的应用进展

对1961～2011年间3种类型的原子吸收光谱法,包括火焰原子吸收光谱法、石墨炉原子吸收光谱法和蒸气发生原子吸收光谱法在烟草行业中的应用进行了综述(引用文献63篇)。     

Microwave plasma torch analytical atomic spectrometry

The microwave plasma torch (MPT), as a relative new source, has found extensive use in atomic spectrometry. In this review, the fundamental features and characteristics of the MPT are summarized and compared with other kinds of analytical atomic sources, such as the more popularly used inductively coupled plasma (ICP), the direct current plasma (DCP), as well as other kinds of microwave plasmas (MWPs). Since the MPT offers some attractive features, it has been used as an excitation source for atomic emission spectrometry (MPT-AES), including the atomic emission detection (AED) for gas chromatography (GC), liquid chromatography (LC) and supercritical fluid chromatography (SFC). Also, it has been used either as an ionization source for atomic mass spectrometry (MPT-AMS) or an atomization source for atomic fluorescence spectrometry (MPT-AFS). The historical development and recent improvements in these MPT atomic spectrometric techniques are evaluated with emphasis on the analytical advantages and limitations. In addition, the future research directions and the application prospects of MPT atomic spectrometry (MPT-AS) are discussed.     

原子吸收及原子荧光光谱分析

本文是《分析试验室》期刊定期评述中关于原子吸收光谱 (AAS)及原子荧光光谱 (AFS)分析的第 9篇综述文章。文中对 2 0 0 0年 12月～ 2 0 0 2年 11月期间我国在AAS AFS领域所取得的主要进展进行评述。内容包括概述、仪器装置、火焰原子吸收光谱法、电热原子吸收光谱法、化学蒸气发生技术以及原子荧光光谱法等。收集文献 35 8篇。     

Structure and Electron Transport at Metal Atomic Junctions Doped with Dichloroethylene

We have investigated the structure and electron transport at dichloroethylene-doped metal atomic junctions at low temperatures (20 K) in ultra-high vacuum, using Fe, Ni, Pd, Cu, Ag, and Au. The metal atomic junctions were fabricated using the mechanically controllable break junction technique. After introducing the dichloroethylene (DCE), the conductance behavior of Fe, Ni, and Pd junctions was considerably changed, whereas little change was observed for Cu, Ag, and Au. For the Pd and Cu junctions, a clear peak was observed in their conductance histograms, showing that the single-molecule junction was selectively formed. To investigate the structure of the metal atomic junctions further, their plateau lengths were analyzed. The length analysis revealed that the Au atomic wire was elongated, and the metal atomic wires were formed for the other transition metals: those that do not normally form metal atomic wires without DCE doping, as DCE adsorption stabilized the metal atomic states. There is a strong interaction between DCE and the metals, where DCE supports the formation of the metal atomic wire for Fe, Ni, and Pd.     

Communication: Hilbert-space partitioning of the molecular one-electron density matrix with orthogonal projectors

A double-atom partitioning of the molecular one-electron density matrix is used to describe atoms and bonds. All calculations are performed in Hilbert space. The concept of atomic weight functions (familiar from Hirshfeld analysis of the electron density) is extended to atomic weight matrices. These are constructed to be orthogonal projection operators on atomic subspaces, which has significant advantages in the interpretation of the bond contributions. In close analogy to the iterative Hirshfeld procedure, self-consistency is built in at the level of atomic charges and occupancies. The method is applied to a test set of about 67 molecules, representing various types of chemical binding. A close correlation is observed between the atomic charges and the Hirshfeld-I atomic charges.     

Atomic absorption with ultracold atoms

Recent advances in laser-atom cooling techniques and diode-laser technology now allow one to conduct an idealised atomic absorption experiment comprising a sample of ultracold, quasi-stationary absorbing atoms and a source of near-monochromatic resonant light. Under such conditions, the atomic absorption coefficient at line centre is independent of the oscillator strength of the atomic resonance line. This offers the prospect of ‘oscillator-strength-free’ atomic absorption spectroscopy in which the absorption signal is equally large for both strong and weak (closed) transitions of the same wavelength and in which absolute atomic absorption could be performed without knowledge of the oscillator strength. Moreover, the resolution and sensitivity for a given atom density are greatly enhanced, typically by approximately three orders of magnitude (and even more for weak transitions), compared with conventional flame or graphite-furnace atomic absorption. We describe an atomic absorption experiment based on samples of ultracold, laser-cooled caesium atoms and a narrow-bandwidth diode laser source that approximates the idealised conditions for oscillator-strength-free atomic absorption. The absorption measurements are used to determine the number density and temperature (approx. 6 μK) of the sample of ultracold atoms. Some of the technical obstacles that would have to be overcome before samples of ultracold atoms and diode laser sources could be used in analytical atomic absorption spectroscopy are discussed.     

匀强电场中基态惰性原子的边界轮廓

应用原子特征边界轮廓模型, 计算了在5.292×10^-5 - 5.292×10^-3 a.u. 匀强电场下, 基态惰性原子的边界轮廓. 计算结果表明, 在电场中原子的边界轮廓呈现近椭球形, 轮廓的变化随电场强度的增强而增大; 在电场强度不变的情况下, 原子边界轮廓的变化随原子序数的增加而增大. 并且计算中得到的单位强度原子平均径向变化率与原子极化率实验结果呈现很好的线性相关性.     

From Electronegativity towards Reactivity—Searching for a Measure of Atomic Reactivity

Pauling introduced the concept of electronegativity of an atom which has played an important role in understanding the polarity and ionic character of bonds between atoms. We set out to define a related concept of atomic reactivity in such a way that it can be quantified and used to predict the stability of covalent bonds in molecules. Guided by the early definition of electronegativity by Mulliken in terms of first ionization energies and Pauling in terms of bond energies, we propose corresponding definitions of atomic reactivity. The main goal of clearly distinguishing the inert gas atoms as nonreactive is fulfilled by three different proposed measures of atomic reactivity. The measure likely to be found most useful is based on the bond energies in atomic hydrides, which are related to atomic reactivities by a geometric average. The origin of the atomic reactivity is found in the symmetry of the atomic environment and related conservation laws which are also the origin of the shell structure of atoms and the periodic table. The reactive atoms are characterized by degenerate or nearly degenerate (several states of the same or nearly the same energy) ground states, while the inert atoms have nondegenerate ground states and no near-degeneracies. We show how to extend the use of the Aufbau model of atomic structure to qualitatively describe atomic reactivity in terms of ground state degeneracy. The symmetry and related conservation laws of atomic electron structures produce a strain (energy increase) in the structure, which we estimate by use of the Thomas-Fermi form of DFT implemented approximately with and without the symmetry and conservation constraints. This simplified and approximate analysis indicates that the total strain energy of an atom correlates strongly with the corresponding atomic reactivity measures but antibonding mechanisms prevent full conversion of strain relaxation to bonding.     

食品中无机盐检测方法研究进展

介绍了食品中无机盐前处理和检测技术研究进展,主要阐述了包括火焰原子吸收光谱法、石墨炉原子吸收光谱法、电感耦合等离子体原子发射光谱法、原子荧光光谱法、X射线荧光光谱法及联用等技术在近年来的应用,并对以后的发展方向进行了展望。