Analysis of free and esterified sterols in vegetable oil methyl esters by capillary GC

The introduction of quality standards for vegetable oil methyl esters is gaining in importance due to their increased use as diesel fuel substitutes and as technical products. Free and esterified sterols, the main constituents of the unsaponifiable matter in vegetable oils, are recovered in vegetable oil methyl esters and may influence the technical properties of vegetable oil methyl ester products. A rapid gas chromatographic method for the qualitative and quantitative determination of free and esterified sterols in vegetable oil methyl esters has therefore been developed. The concentration of the free sterols as well as their qualitative and quantitative composition and the concentration of the sterol esters have been determined in rape seed oil methyl ester samples by GC–FID. Prior to analysis, the free sterols were silylated with N,O-bis(trimethylsilyl)trifluoroacetamide with 1% of trimethylchlorosilane; betulinol was used as an internal standard. Calibration was performed by analysis of standard solutions containing β-sitosterol, cholesteryl stearate, and betulinol. The reproducibility of the quantitative results has been evaluated by repeated injections of the same test solution and by repeated complete analysis of the same sample.     

Production of biodiesel fuel by transesterification of rapeseed oil

Fatty acid methyl esters (FAMEs) show large potential applications as diesel substitutes, also known as biodiesel fuel. Biodiesel fuel as renewable energy is an alternative that can reduce energy dependence on petroleum as well as air pollution. Several processes for the production of biodiesel fuel have been developed. Transesterification processes under alkali catalysis with short-chain alcohols give high yields of methyl esters in short reaction times. We investigated transesterification of rapeseed oil to produce the FAMEs. Experimental reaction conditions were molar ratio of oil to alcohol, concentration of catalyst, type of catalyst, reaction time, and temperature. The conversion ratio of rapeseed oil was enhanced by the alcohol:oil mixing ratio and the reaction temperature.     

Performance and emission characteristics of a diesel engine operating on safflower seed oil methyl ester

Applied Biochemistry and Biotechnology - This study focused on the evaluation and testing of safflower seed oil methyl ester as a diesel fuel alternative. The kinematic viscosity and ASTM fuel...     

酯类基础油热氧化过程中的拉曼光谱分析

将DXR激光显微拉曼光谱仪与Linkam FTIR600控温台联用,测定了连续加热、恒温氧化过程中三羟甲基丙烷油酸酯(TMPTO)、偏苯三酸三异酸酯(TDTM)、己二酸二异辛酯(DOA)等酯类基础油的拉曼特征峰的变化规律,探讨了热氧化过程中酯类油分子结构的变化特点。研究发现,随着加热温度的提高,酯类基础油的部分拉曼峰的峰位与峰强均发生了明显变化;酯类基础油的甲基与亚甲基的C—H伸缩振动峰及亚甲基的剪式振动峰对温度很敏感,随着温度的升高发生了不同程度的峰强衰减,冷却后可基本恢复;C‖O振动峰随温度的升高变化不明显;TMPTO酯类基础油的C‖C双键伸缩振动峰随着温度升高逐渐向高波区移动冷却后可恢复,‖C—H和C‖C的伸缩振动峰强冷却后不能完全恢复;恒温下随着氧化时间的延长,TDTM和DOA基础油的拉曼峰无明显变化,与TMPTO基础油的‖C—H、C‖C及—CH2—相关的拉曼峰呈规律性衰减。因此可运用原位拉曼光谱法对不饱和酯类基础油中连续氧化进行监测。而原位光谱法对饱和酯类油和芳香酯类油高温连续氧化过程的监测具有一定的局限性。     

Determination of acylglycerols in vegetable oil methyl esters by on-line normal phase LC-GC

An on-line LC-GC method for the analysis of mono-, di-, and triacylglycerols in vegetable oil methyl esters has been developed. The concentrations of these components have turned out to be key parameters for the quality of diesel fuel substitutes. Separation of all classes of acylglycerols from the fatty acid methyl ester matrix is achieved by LC after acetylation of the hydroxyl groups. The acylglycerol fraction is transferred on-line to GC, using the loop-type interface and concurrent eluent evaporation. Quantification of mono-, di-, and triacylglycerols is performed by combining external calibration with internal standardization. Both recovery of the procedure and reproducibility of the quantitative results are evaluated.     

一种可用于光降解的纳米氧化锌油水分离网

通过低温水热法在钢丝网上生长六棱柱形的氧化锌纳米柱.包覆了氧化锌纳米柱的钢丝网具有水下超疏油的特殊浸润性,并可用于油水分离.滤网在室温常压下可对含有汽油、柴油和原油等油水混合物进行高效快速分离,分离效率可达98%以上.材料可以承受1.4 kPa的油层压力且可反复使用.由于氧化锌的光响应性强,滤网可快速降解水中的亚甲基蓝,2 h的降解率可达80%.包覆了氧化锌纳米柱的钢丝网具备同时进行油水分离和降解环境中污染物的能力,是一种新型多功能水处理材料.     

Influence of intramolecular interaction on the enthalpy and entropy of methylene unit sorption for the homologous series of carbonyl-containing compounds analyzed by capillary GC

The enthalpy and entropy of sorption of methylene units in the homologous series of n-alkyl acetates; methyl, n-butyl, and phenyl n-alkyl ketones; and the methyl esters and chloroanhydrides of n-aliphatic carboxylic acids have been determined on an SE-54 capillary column. The enthalpy of sorption of the first methylene unit is anomalously high when the growing n-alkyl chain is connected directly to a carbonyl group. This effect is a result of intramolecular interaction between neighboring methyl and carbonyl groups. It has been shown by measurement of the enthalpy and entropy of sorption of the difluoromethylene unit in the series of n-hexyl esters of perfluorinated carboxylic acids that for these compounds the effect is absent. The intramolecular interaction was found to increase in the order methyl butyl ketone < methyl phenyl ketone < methyl acetate < acetyl chloride < acetone.     

Deuterium NMR used to indicate a common mechanism for the biosynthesis of ricinoleic acid by Ricinus communis and Claviceps purpurea

Previous studies have shown that ricinoleic acid from castor bean oil of Ricinus communis is synthesized by the direct hydroxyl substitution of oleate, while it has been proposed that ricinoleate is formed by hydration of linoleate in the ergot fungus Claviceps purpurea. The mechanism of the enzymes specific to ricinoleate synthesis has not yet been established, but hydroxylation and desaturation of fatty acids in plants apparently involve closely related mechanisms. As mechanistic differences in the enzymes involved in the biosynthesis of natural products can lead to different isotopic distributions in the product, we could expect ricinoleate isolated from castor or ergot oil to show distinct (2)H distribution patterns. To obtain information concerning the substrate and isotope effects that occur during the biosynthesis of ricinoleate, the site-specific natural deuterium distributions in methyl ricinoleate isolated from castor oil and in methyl ricinoleate and methyl linoleate isolated from ergot oils have been measured by quantitative (2)H NMR. First, the deuterium profiles for methyl ricinoleate from the plant and fungus are equivalent. Second, the deuterium profile for methyl linoleate from ergot is incompatible with this chemical species being the precursor of methyl ricinoleate. Hence, it is apparent that 12-hydroxylation in C. purpurea is consistent with the biosynthetic mechanisms proposed for R. communis and is compatible with the general fundamental mechanistic similarities between hydroxylation and desaturation previously proposed for plant fatty acid biosynthesis.     

Studies of Synergism/Antagonism in Sodium Alkyl Benzene Sulfonate/Methyl Oleate Model Oil Systems

Experimental studies are conducted in order to elucidate the mechanisms responsible for synergism/antagonism for lowering interfacial tension in alkyl benzene sulfonate/brine/methyl oleate model oil and alkyl benzene sulfonate/alkali/methyl oleate model oil systems. We found that different mechanisms exist in above two systems. In alkyl benzene sulfonate/brine/methyl oleate model oil systems, methyl oleate influences the partition of added surfactants between oil and aqueous phase by changing equivalent alkane carbon number (EACN) value of model oil. In alkyl benzene sulfonate/alkali/methyl oleate model oil systems, methyl oleate in oil phase has two functions: on the one hand, it influences the partition of surfactant between oil and aqueous phase; on the other hand, it directly affects IFT by displacing surfactant molecule or forming mixed film with surfactant molecule at the interface.     

生物柴油调合对其低温流动性能的改善

为了了解生物柴油中脂肪酸甲酯组成对其低温流动性能的影响,探索改善其流动性能的方法,以大豆油、花生油和牛油为原料合成了大豆油甲酯、花生油甲酯和牛油甲酯,测定了它们的脂肪酸甲酯组成和低温流动性能.结果表明,长碳链饱和脂肪酸甲酯的含量是影响生物柴油低温流动性能的主要因素.通过对混合生物柴油流动性能的测定,发现可以通过不同来源...     

Multivariate control charts based on NAS and mid‐infrared spectroscopy for quality control of B5 blends of methyl soybean biodiesel in diesel

In this work, mid‐infrared spectroscopy and multivariate control charts based on net analyte signal were applied for quality control of B5 blends of biodiesel/diesel (5% biodiesel/95% diesel). Control charts were constructed using instrumental signal decomposition, generating three charts: the net analyte signal chart for monitoring the analyte of interest (methyl soybean biodiesel); the interference chart, which corresponds to the contribution of all other compounds in the diesel sample (diesel); and the residual chart, which corresponds to non‐systematic variations. Statistical limits were established for each developed chart, using samples inside quality specifications (normal operation conditions). To validate multivariate control charts, new samples were analyzed. The new samples represented samples in‐control and samples out‐of‐control in relation to the content of biodiesel, adulterated biodiesel with severe vegetable oils and adulterated diesel with residual automotive lubricant oil, kerosene, and gasoline. The results obtained show an excellent distinction between the samples inside and out of the quality specifications, with 91% and 100% correctly classified, respectively, which demonstrates that the methodology developed is a viable alternative for quality monitoring of this type of fuel. Copyright © 2015 John Wiley & Sons, Ltd.     

Selected adsorbent materials for oil-spill cleanup

Thermogravimetric analysis and differential scanning calorimetry have been applied to determine the adsorption of oil on selected adsorbates: sand, organo-clay and raw cotton. Thermal analysis provides evidence for the interaction and physical adsorption of the diesel oil on the adsorbates. Sand adsorbed diesel to around 33% by mass through weak physical interactions and appeared to fractionate the diesel components. The organo-clays more strongly adsorbed the diesel as evidenced by higher thermal decomposition temperatures. Differential scanning calorimetry (DSC) shows a strong interaction between the organo-clay and the diesel oil. Diesel is effectively adsorbed on organo-clay through adsorption and partitioning and is not removed from the organo-clay until significantly higher temperatures. Cotton displayed a very high adsorption/absorption capacity. A shift in the peak at 110°C (compared with pure diesel at 90°C) suggests an interaction between the diesel compounds and the cotton fibres as diesel is being retained at higher temperatures and more energy is required to evaporate the diesel. DSC was used to determine the strength of the diesel adsorption on the sand, organo-clay and cotton. The use of adsorbent materials to adsorb oil from oil spills is of great significance in modern society. One method of proving the effectiveness of an adsorbent material is through thermoanalytical techniques.     

Exploring molecular recognition pathways within a family of gelators with different hydrogen bonding motifs

We report the synthesis of a family of gelators in which alkyl chains are connected to the amino groups of l-lysine methyl ester using a range of different hydrogen bonding linking groups (carbamate, amide, urea, thiourea and diacylhydrazine) using simple synthetic methodology based on isocyanate or acid chloride chemistry. The ability of these compounds to gelate organic solvents such as toluene or cyclohexane can be directly related to the ability of the linking group to form intermolecular hydrogen bonds. In general terms, the ability to structure solvents can be considered as: thiourea<carbamate<amide<urea∼diacylhydrazine. This process has been confirmed by thermal measurements, scanning electron microscopy (SEM) and infrared and circular dichroism spectroscopies. By deprotecting the methyl ester group, we have demonstrated that a balance between hydrophobic and hydrophilic groups is essential—if the system has too much hydrophilicity (e.g., diacylhydrazine, urea) it will not form gels due to low solubility in the organic media. However, the less effective gelators based on amide and carbamate linkages are enhanced by converting the methyl ester to a carboxylic acid. Furthermore, subsequent mixing of the acid with a second component (diaminododecane) further enhances the ability to form networks, and, in the case of the amide, generates a two-component gel, which can immobilise a wide range of solvents of industrial interest including petrol and diesel (fuel oils), olive oil and sunflower oil (renewable food oils) and ethyl laurate, isopropyl myristate and isopropyl palmitate (oils used in pharmaceutical formulation). The gels are all thermoreversible, and may therefore be useful in controlled release/formulation applications.     

Evacuating liquid coatings from a diffusive oblique fin in micro-/mini-channels

The present work emphasis on to estimate the theoretical findings of energy and exergy analysis of biodiesel fueled with diesel on variable compression ratio engine at various combinations of fuel blend at different compression ratios. This study aims to identify the optimum engine settings based on compression ratio and biodiesel blends. The engine is operated with methyl esters of rubber seed oil and its 20, 40, 60 and 80% blends with diesel on volume basis. The compression ratio is varied from 18:1 to 22:1 at five compression ratios at 80% load in 3.5 kW, 1500 rpm, single cylinder water-cooled direct injection engine. The variables analyzed are energy and exergy potential of fuel input, shaft work, cooling water, maximum pressure, heat release rate, exergy destruction, brake-specific energy consumption, brake thermal efficiency, second law efficiency, entropy generation, exhaust gas temperature and various emissions. It is observed that the combination of CR 20, B20 and B40 at 80% load gives a better performance in thermodynamic analysis of methyl esters of rubber seed oil blended with diesel in VCR engine.

     

In situ (1)H and (13)C MAS NMR kinetic study of the mechanism of H/D exchange for propane on zeolite H-ZSM-5

The kinetics of hydrogen (H/D) exchange between Br?nsted acid sites of zeolite H-ZSM-5 and variously deuterated propanes (propane-d(8), propane-1,1,1,3,3,3-d(6), propane-2,2-d(2)) have been monitored in situ by (1)H MAS NMR spectroscopy within the temperature range of 503-556 K. The contribution of intramolecular hydrogen transfer to the H/D exchange in the adsorbed propane was estimated by monitoring the kinetics of (13)C-labeled carbon scrambling in propane-2-(13)C in situ with (13)C MAS NMR at 543-573 K. Possible mechanisms of the exchange have been verified on the basis of the analysis of the variation of protium concentration in both the methyl and the methylene groups of propane in dependence of the reaction time. The main route of the exchange consists of a direct exchange of the acidic OH groups of the zeolite with either the methyl groups or the methylene group presumably with a pentacoordinated carbonium ion intermediate. The assumption that the intramolecular H scrambling between the methyl groups and the methylene group of propane via carbenium-ion-type intermediates is the fastest process among the other possible routes does not account for the experimental kinetics of H/D exchange for propanes with different initial contents and locations of deuterium in a propane molecule. The rate constant (k(3)) for intramolecular H/D exchange between the methyl and the methylene groups is 4-5 times lower compared to those of the direct exchange of both the methyl (k(1)) and the methylene (k(2)) groups with Br?nsted acid sites of the zeolite, the k(1) being ca. 1.5 times higher than k(2). At lower temperature (473 K), the exchange is slower, and the expected difference between k(1) and k(2) is more essential, k(1) = 3k(2). This accounts for earlier observed regioselectivity of the exchange for propane on H-ZSM-5 at 473 K. Faster direct exchange with the methyl groups compared to that with the methylene groups was attributed to a possible, more spatial accessibility of the methyl groups for the exchange. Similar activation energies for H and C scramblings with a 2 times more rapid rate of H scrambling was rationalization by the proceeding of these two processes through an isopropyl cation intermediate, as in classical carbenium ion chemistry.     

柴油等离子体催化氧化-离子液体萃取脱硫的实验研究

随着环境法的日益完善,柴油的低硫化成了亟待解决的问题。本文采用浸渍法制备了Cu2+负载型酸化改性Al2O3型催化剂,对市售0#柴油进行了等离子体催化氧化脱硫实验研究,后又用自制的新型离子液体(BMIMDBP)对氧化脱硫后的柴油进行萃取脱硫。实验结果表明:在使用板-板式石英反应器,催化剂质量分数为w(catalyst)=5%,空气流速为200 mL/min,放电时间为15min,离子液体与柴油的体积比为1∶1和萃取5次的条件下,脱硫率可以达到52.1%。本方法的实施为柴油脱硫开辟了一条新的途径。     

柴油溶剂中脂肪酶催化高酸值废油脂酯化制备生物柴油

采用0＃柴油作为反应溶剂,利用固定化脂肪酶催化高酸值废油脂与甲醇酯化反应制备生物柴油。来源于Candida antarctica的固定化脂肪酶Novozym435在0＃柴油溶剂中具有极高的催化活性。以酸价高达157×10-3的废油脂为原料,废油脂质量比10%的Novozym435,甲醇与废油脂初始摩尔比2∶1,0＃柴油与废油脂质量比5∶1,摇床摇速170r/min,50℃下反应2h甲酯化率可达95.10%。0＃柴油作为反应溶剂有效地溶解了高酸值废油脂和甲醇,降低了反应体系的黏度和消除了甲醇对Novozym435的负面影响,提高了Novozym435的稳定性。同时,0＃柴油溶剂对未脱胶废油脂中残留的对脂肪酶有害的磷脂等胶类物质具有一定的稀释作用。该工艺省却了溶剂蒸馏的繁琐工序,直接得到脂肪酸甲酯和石化柴油的混合燃料。     

Synthesis,luminescence, and spectral characteristics of 7-diethylamino-3-(2-arylethenyl)coumarins

By condensation of 7-diethylamino-3-formylcoumarin with aromatic compounds containing an active methyl or methylene group, a number of previously unreported 7-diethylamino-3-(2-arylethenyl)coumarins have been obtained. The reaction conditions depend on the activity of the methyl (or methylene) component. The spectral and luminescent properties of the synthesized compounds have been investigated.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, 1171–1175, September, 1992.     

Quality control of vegetable oil methyl esters used as diesel fuel substitutes: Quantitative determination of mono-, di-, and triglycerides by capillary GC

Vegetable oil methyl esters are increasingly being used as substitutes for petroleum-based diesel fuels. Because the presence of triglycerides and partial glycerides in the fuel as a result of incomplete transesterification of vegetable oils can lead to serious engine problems, continuous quality control of the product is essential. A rapid gas chromatographic method has been developed for the quantitative determination of mono-, di-, and triglycerides in vegetable oil methyl esters. Prior to analysis, mono-, and diglycerides were silylated with N,O-bis(trimethylsilyl)trifluoroacetamide; tridecanoin was used as internal standard. Calibration was performed by analysis of standard solutions containing mono-, di-, and triolein: the calibration plots for mono- and diglycerides showed good linearity, whereas for triglycerides no linearity was observed for triolein concentrations below 0.05 mg/ml. When a non-linear multi level calibration was employed for the quantitation of triglycerides, the method gave excellent quantitative results for mono-, di-, and triglycerides in vegetable oil methyl esters.     

A NMR Study of Magnetic Nonequivalence of Methylene Protons in Some 1,1,2-Trisubstituted Ethanes of the Type XCH2 CHXY

Magnetic nonequivalence of methylene protons in some 1,1,2-trisubstituted ethanes of the type XCH₂ CHXY was studied in the medium of various solvents over the temperature range of 0–95°C. Asymmetry effect and rotamer populations have been considered to be two major contributions to magnetic nonequivalence of methylene protons in the title compounds. A graphic method has been proposed to determine the asymmetry effect for methyl 2,3-dibromopropionate, ethyl 2,3-dibromopropionate, methyl 2,3-dichloropropionate, and (1,2-dibromoethyl) benzene in various solvents.