Studies in macrolide synthesis: A highly stereoselective synthesis of (+)-(9S)-dihydroerythronolide a using macrocyclic stereocontrol

(+)-(9S)-Dihydroerythronolide A, 1, is prepared in 8 steps from macrolide 3 by exploiting the conformational preferences of the (5E,11E)-diene intermediate 2. The stereocontrolled introduction of the hydroxyl groups at C₆, C₁₁, and C₁₂ is achieved by osmylation, 2 → 13 and 15 → 1, while that at C₅ is obtained by a Zn(BH₄)₂ reduction, 13 → 14.     

Tris-chelate complexes with chiral ligands: In search of diastereoisomeric selectivity with remote stereogenic centres

The chiral ligands, 4,4′-bis{(1S,2R,4S)-(−)-bornyloxy}-2,2′-bipyridine, (1S,2R,4S)-1, and 4,4′-bis{(1R,2S,4R)-(+)-bornyloxy}-2,2′-bipyridine, (1R,2S,4R)-1, have been prepared and characterized by spectroscopic techniques and, for (1S,2R,4S)-1, by single crystal X-ray diffraction. Despite the use of enantiomerically pure ligands, the formation of the complexes [Fe((1S,2R,4S)-1)₃]²⁺, [Ru((1S,2R,4S)-1)₃]²⁺, [Ru((1S,2R,4S)-1)(bpy)₂]²⁺ and [Ru((1R,2S,4R)-1)(bpy)₂]²⁺ proceeds without preference for either the Δ or Λ-diastereoisomers.     

Preparation of (S)-2-substituted succinates by stereospecific reductions of fumarate and derivatives with resting cells of Clostridium formicoaceticum

Fumarate derivatives have been reduced to (S)-2-methylsuccinate 2a, (S)-2-ethylsuccinate 3a and (S)-2-chlorosuccinate 4a in up to 1 M concentrations with Clostridium formicoaceticum. Formate was the electron donor and viologens or anthraquinone-2,6-disulphonate acted as artificial electron mediators. Reductions with freeze-dried cells in ²H₂O-buffers led to the (2R,3S)-[2,3-2,²H]-dideuterated succinate derivatives. The productivity numbers¹ ranged from 450 to 5000 and the enantiomeric excess of all (S)-2-substituted succinates was 99 %.     

First Total Synthesis of the (±)-Preverecynarmin

The preverecynarmin(12), (+)-(1E,3E,7E,11E)-cembra-3,7,11-tetraen-6yl acetate,was first isolated in 1990 from both Armina maculata and its prey,the pennatulacean coral Veretillum cynomorium with other there briarane diferpenoids and cembene-C((1E,3E,7E,11E)-cembra-l,3,7,11-tetraen¹. As far as we known, the bioactive test and total synthesis of ¹² have not been reported yet. Herein we wish to describe the first total synthesis of (±)-preverecynarmin (12).     

Metal complexes of biologically important ligands: Synthesis of amino acidato complexes of Pd containing a C,N-cyclometallated group as an ancillary ligand

New amino acidato complexes of Pd^II of stoichiometry [Pd(C---N)(Aa)] (C---N=C,N-cyclometallated ligand, Aa = N,O-amino acidato ligand) have been obtained by reaction of [Pd(C---N)(acac)] (C---N=N,N-dimethylbenzylamine-C²,N (dmba) (1) or N,N-dimethyl(S--phenylethyl)amine-C²,N (S-dmphea) (2)) with glycine, chiral amino acids (alanine, phenylalanine and valine), and amino acid derivatives (N-acetylglycine and N-acetyl-,β-dehydroalanine) in MeOH. The compounds are characterized by IR, ¹H and ¹³C NMR. The geometry of these complexes has been unambiguously determined by NOE difference experiments and NOESY measurements.     

TEMPO-initiated oxidation of 2-aminophenol to 2-aminophenoxazin-3-one

The oxidation reaction of 2-aminophenol (OAP) to 2-aminophenoxazin-3-one (APX) initiated by 2,2,6,6-tetramethyl-1-piperidinyloxyl (TEMPO) has been investigated in methanol at ambient temperature. The oxidation of OAP was followed by electronic spectroscopy and the rate constants were determined according to the rate law −d[OAP]/dt=k_obs[OAP][TEMPO]. The rate constant, activation enthalpy and entropy at 298 K are as follows: k_obs (dm³ mol⁻¹ s⁻¹)=(1.49±0.02)×10⁻⁴, E_a=18±5 kJ mol⁻¹, ΔH^‡=15±4 kJ mol⁻¹, ΔS^‡=−82±17 J mol⁻¹ K⁻¹. The results of oxidation of OAP show that the formation of 2-aminophenoxyl radical is the key step in the activation process of the substrate.     

Synthesis and olfactory properties of (−)-(1R,2S)-Georgywood

The enantiomers of Georgywood^® were synthesized from (E)-2-methyl-6-methylene-nona-2,7-diene and methacrylaldehyde followed by oxidation of the Diels–Alder adduct and classical racemate separation of the acid with optically-active N-methylephedrine. Conversion to the final ketone and olfactory evaluation showed that the (−)-(1R,2S)-enantiomer is more powerful by a factor of >100 than its antipode. The absolute configuration was determined by conformational studies and CD-analysis.     

Transport phenomenon as a function of counter and co-ions in solution: chronopotentiometric behavior of anion exchange membrane in different aqueous electrolyte solutions

Anion exchange membrane has been investigated in different electrolyte solutions by chronopotentiometry to explore the influence of co-ion and counterion of the exchange group of the membrane, on the transport phenomena. Chloride, nitrate, sulfate and acetate in sodium salts were used as counterions and sodium, potassium, calcium and ammonium in chloride salts were used as co-ions. The membrane showed a potential drop (E₀) in all these electrolytes when a constant current was applied across it, which remained constant for a period less than τ, called the transition time and rose gradually to a maximum (E_max) value. The parameters such as τ, E₀ and E_max and the potential jump (ΔE) and τ and the inflection zone (Δt) along the time axis have been measured and compared at an applied current density (I) of 10 mA cm⁻² in 10 mM solutions. The values of τ^1/2/z_A[A₀] or τ^1/2/z_C[C₀], with or , E₀ and ΔE with or (where r_A and r_C are the ionic radii of counter and co-ions, respectively) have been correlated. Permselectivity (P) and transference number of the membrane with respect to each one of the above electrolytes have been evaluated and discussed.     

Experimental study and modelling using the ERAS-Model of the excess molar volume of acetonitrile–alkanol mixtures at different temperatures and atmospheric pressure

Densities of {(1−x)CH₃(CH₂)_n−1OH + xCH₃CN} for n=1, 2, 3 or 4 have been determined as a function of composition at 288.15, 293.15, 298.15 and 303.15 K at atmospheric pressure using a vibrating-tube densimeter (Anton Paar DMA 4500, resolution 1×10⁻⁵ g cm⁻³). Excess molar volumes were calculated. The V_m^E values were negative for acetonitrile–methanol mixtures and sigmoid for acetonitrile–alkanols (C₂–C₄) mixtures over the complete mole fraction range. V_m^E values increase in a positive direction with increase in chain length of the alkanols and with the temperature. The Extended Real Associated Solution Model (ERAS-Model) calculations allowing for self-association for the alkanols and complex formation between acetonitrile and alkanols have been used to correlate experimental data. The model is able to reproduce the asymmetrical V_m^E behavior of the studied systems, although agreement between theoretical and experimental values is less satisfactory for some concentration ranges.     

Temperature dependence of the rate constant for reactions of hydrated electrons with H, OH and H2O2

The temperature dependence of the rate constants, for the reactions of hydrated electrons with H atoms, OH radicals and H₂O₂ has been determined. The reaction with H atoms, studied in the temperature range 20–250°C gives k(20°C) = 2.4 × 10¹⁰M^-1s¹ and the activation energy E_A = 14.0 kJ mol^-1 (3.3 kcal mol^-1). For reaction with OH radicals the corresponding values are, k(20°C) = 3.1 × 10¹⁰M^-1s^-1 and E_A = 14.7 kJ mol^-1 (3.5 kcal mol^-1) determined in the temperature range 5–175°C. For reaction with H₂O₂ the values are, k(20°C) = 1.2 × 10¹⁰M^-1s^-1 and E_A = 15.6 kJ mol^-1 (3.7 kcal mol^-1) measured from 5–150°C. Thus, the activation energy for all three fast reactions is close to that expected for diffusion controlled reactions. As phosphates were used as buffer system, the rate constant and activation energy for the reaction of hydrated electron with H₂PO₄^- was determined to k(20°C) = 1.5 × 10⁷M^-1s^-1 and E_A = 7.4 kJ mol^-1 (1.8 kcal mol^-1) in the temperature range 20–200°C.     

Polymerization process of the silane coupling agent 3-aminopropyltriethoxy silane – H NMR spectra and kinetics of ethanol release

In the 3-aminopropyltriethoxy silane–deuterated ethanol–H₂O system, the rate of release of ethanol from the ethoxy groups, a reaction which occurs during the condensation process, has been followed by use of ¹H NMR spectroscopy at different temperatures. Two separate reaction processes have been identified, and values of the reaction rate constants and thermodynamic parameters (E_a, ΔH^‡ and ΔS^‡) have been calculated.     

New applications of azamacrocyclic ligands in ion recognition, transport and preconcentration of palladium

This work deals with the evaluation of a synthesized 15-membered triolefinic azamacrocycle containing a NH group, (E,E,E)-1,6-bis(p-tolylsulfonyl)-1,6,11-triazacyclopentadeca-3,8,13-triene (R₂NH), for the selective extraction of palladium and platinum from aqueous chloride matrices prior their analysis by ICP-AES. The optimal conditions for liquid–liquid experiments have been evaluated, with special emphasis given to the selection of the organic solvent and the optimal aqueous chloride concentration for the extraction of PdCl₄²⁻ and PtCl₆²⁻. The selective transport and separation of palladium(II) from a mixture of Pd(II) and Pt(IV) was accomplished by means of a supported liquid membrane system containing the macrocycle as carrier dissolved in anethol and 0.5 M thyocianate solution as stripping solution. A C18 cartridge has been activated with the reagent R₂NH in order to test the feasibility of achieving the preconcentration of palladium solutions. Enrichment factors close to the theoretical ones were obtained with the designed system and using thiourea as eluting solution.     

An unexpected allomer of chlorophyll: 13(S)-hydroxy-10-methoxychlorophyll b

The allomerization of chlorophyll b in methanol produced 13²(S)-hydroxy-10-methoxychlorophyll b in a yield of ca. 8%. The formation of this allomer was totally unexpected, as 10-substituted chlorophylls have never been reported before. The structure of the new chlorophyll b derivative was determined on the basis of UV/Vis, FAB-MS, ¹H NMR and 2D ROESY NMR spectra. This letter focuses on the NMR analysis.     

High-field EPR investigation of a series of mononuclear Mn(II) complexes doped into Zn(II) hosts

The five-coordinate mono-halide mononuclear Zn(II) complexes [Zn(tpa)X]⁺ (tpa = tris(2-pyridylmethyl)amine; X = I ([Zn(tpa)I]I; 1a), Br ([Zn(tpa)Br](ZnBr₄)_0.5; 2a) and Cl ([Zn(tpa)Cl](ZnCl₄)_0.5; 3a)) and the six-coordinate mononuclear complex [Zn(tpa)(NCS)₂] (4a) have been synthesized and characterized by X-ray crystallography. The [Zn(tpa)X]⁺ complexes doped with the corresponding [Mn(tpa)X₂] complexes (X = I (1b), Br (2b) and Cl (3b)) have been synthesized and their electronic properties investigated by multifrequency high field EPR (HF-EPR) (95–285 GHz). The magnetically diluted conditions allow the determination of the hyperfine coupling constant A (A = 68.10⁻⁴ cm⁻¹ for 1b–3b). The zero-field splitting parameters (D and E) found for 1b–3b are comparable to those found for neat samples of the [Mn(tpa)X₂] complexes (1b: D = 0.635 cm⁻¹, E/D = 0.189; 2b: D = 0.360 cm⁻¹, E/D = 0.192; 3b: D = 0.115 cm⁻¹, E/D = 0.200). The efficacy of using multifrequency EPR under dilute conditions to precisely determine spin Hamiltonian parameters is discussed.     

Catalytic and structural studies of Rh complexes of (−)-(2S,4S)-2,4-bis(diphenylphosphino)pentane. Asymmetric hydrogenation of acetophenonebenzylimine and acetophenone

Rhodium(I) complexes formed by (−)-(2S,4S)-2,4-bis(diphenylphosphino)pentane (BDPP) are efficient catalysts for the hydrogenation of acetophenone and acetophenonebenzylimine. The composition of the solvent mixture and the reaction temperature have a marked influenced on the enantioselectivity. These effects are thought to be related to the enhanced conformational flexibility of six-membered rings when simple substrates without functional groups are coordinated to the rhodium. X-ray crystallographic studies reveal that in [Rh((S,S)-BDPP)NBD]⁺ (1) the ligand is in a chair conformation, and that in [Rh((S,S)-BDPP)COD]⁺ (2) the chelate ring is in a δ-skew conformation. Studies of Rh((S,S)-BDPP)(NBD)Cl (3) in solution indicate a trigonal bipyramidal structure with a chair conformation of the ring in aromatic solvents and a conformationally labile ring in methanol.     

Dynamics of the Frederiks transition in nematics consisting of disc-like molecules Thermal dependence of a bend viscosity coefficient

We report measurements of the dynamics of the magnetic Frederiks transition in nematics consisting of disc-like molecules. In this paper the results are presented for three 2, 3, 6, 7, 10, 11-hexakis(p-alkoxybenzoyloxy)triphenylenes, which exhibit a normal nematic phase, and for three 2, 3, 7, 8, 12, 13-hexa(alkanoyloxy)truxenes, which exhibit an inverted nematic phase. We find that the thermal dependence of a bend viscosity coefficient (γ*₁) can be accurately described by the expression, γ*₁ ∼ S² exp (E_a/kT). The absolute value of γ*₁ is found to be higher (by a factor of 10-100) than is commonly encountered in nematics consisting of rod-like molecules.     

1,1,2,2-tetrabromodisilane: gas-phase molecular structure and conformational composition as determined by electron diffraction

The molecular structure of 1,1,2,2-tetrabromodisilane has been investigated using gas-phase electron diffraction data obtained at 110°C. At this temperature the molecules exist as a mixture of about equal parts (X = 0.5 ±0.2) of the two conformers with the H---Si---Si---H torsion angle equal to 180° (anti) or 60° (gauche). Assuming that the two conformers differ in their geometries only in the torsion angle φ, some of the important distance (r_a) and angle () parameters are: r(Si---Si) = 2.349(19) Å, r(Si---Br) = 2.205(5) Å, r(Si---H) = 1.485 Å (assumed), Br---Si---Br = 110.1(1.6)°, Si---Si---Br = 107.1(1.2)° Si---Si---H = 108.6° (assumed). The error limits are 2σ. The observed conformational composition (X_anti = 0.5(0.2)) corresponds to an energy difference between the conformers of ΔE = E(gauche) — E(anti) = 0.5 ± 0.6 kcal mol⁻¹, assuming ΔS = Rln2.     

Heat capacity of copper hydride

The heat capacity of copper hydride has been measured in the temperature range 2–60 and 60–250 K using two adiabatic calorimeters. Special procedure for the purification of CuH has been applied and a careful analysis of sample contamination has been performed. The experimental results have been extrapolated up to 300 K due to instability of the copper hydride at room temperature. From the temperature dependence of heat capacity the values of entropy S°(T), thermal part of enthalpy H°(T)−H°(0) and Gibbs function [−(G°(T)−H°(0))] have been calculated assuming S°(0)=0. The standard absolute entropy, standard entropy of formation from the elements and enthalpy of decomposition of copper hydride from the elements have been calculated and found to be 130.8 J K⁻¹ mol⁻¹ (H₂), −85.1 J K⁻¹ mol⁻¹ (H₂), −55.1 kJ mol⁻¹ (H₂), respectively. These new results gave the possibility of discussion on thermodynamic properties of copper hydride. Debye temperature has been for the first time determined experimentally.     

Capillary electrophoresis of methylmercury with injection by sample stacking

A procedure for separation and quantitation of methylmercury by capillary electrophoresis using sample stacking as the injection technique is presented. The CE conditions have been optimized in order to separate the methylmercury from the excess cysteine peak and to concentrate large volumes of sample obtaining a low detection limit. Under the proposed operational conditions, the detection limit (S/N = 3) was 12 ng g⁻ and the limit of quantitation (S/N = 10) was 20 ng g⁻¹ with a linear range of 20–100 ng g⁻¹ (as methylmercury in samples). The method was tested using different reference materials with a certified methylmercury content.     

Electronic absorption spectrum of Ba(MnO4)2·3H2O/Ba(ClO4)2·3H2O

Polarized absorption spectra of Ba(MnO₄)₂·3H₂O/Ba(ClO₄)₂·3H₂O mixed single crystals are reported at 4.2°K. Previous ¹T₂ → ¹A₁ assignments for the 5200 Å and 3000 Å absorption bands of MnO₄⁻ are substantiated; further support is provided for the ¹T₁ → ¹A₁ assignment of the 3600 Å absorption band of MnO₄⁻. The site-splitting of the 5200 Å ¹T₂ state is E(¹E)−E(¹A) ≈ −150 cm⁻¹; that of the 3000 Å ¹T₂ state is E(¹E)−E(¹A) ≈ 300 cm⁻¹. A significant e vibronic intensity component is observed in the 5200 Å ¹T₂ state.