Direct sample insertion for inductively coupled plasma spectrometry

Direct sample insertion (DSI) is an alternative sample introduction technique for inductively coupled plasma spectrometry whereby the sample, either liquid or solid, is placed onto or into a sample carrying probe which is inserted directly into the plasma. This review provides an overview of the DSI technique including instrumentation, operating parameters, system response, analytical figures of merit and applications.     

Analysis of pesticide residues in mixed fruit and vegetable extracts by direct sample introduction/gas chromatography/tandem mass spectrometry

Direct sample introduction (DSI), or "dirty sample injection," was investigated in the determination of 22 diverse pesticide residues in mixed apple, green bean, and carrot extracts by benchtop gas chromatography/tandem mass spectrometry (DSI/GC/MS-MS). The targeted pesticides, some of which were incurred in the samples, included chlorpyrifos, azinphos-methyl, parathion-methyl, diazinon, terbufos, p,p'-DDE, endosulfan sulfate, carbofuran, carbaryl, propargite, bifenthrin, dacthal, trifluralin, metalaxyl, pendimethalin, atrazine, piperonyl butoxide, diphenylamine, vinclozolin, chlorothalonil, quintozene, and tetrahydrophthalimide (the breakdown product of captan). The analytical DSI method entailed the following steps: (1) blend 30 g sample with 60 mL acetonitrile for 1 min in a centrifuge bottle; (2) add 6 g NaCl and blend 30 s; (3) centrifuge for 1-2 min; (4) add 5 mL upper layer to 1 g anhydrous MgSO4 in a vial; and (5) analyze 11 microL extract, using DSI/GC/MS-MS. Sample cleanup is not needed because GCIMS-MS is exceptionally selective for the targeted analytes, and nonvolatile coextracted matrix components do not contaminate the injector or the GC/MS-MS system. Average recoveries of the pesticides were 103 +/- 7% with relative standard deviations of 14 +/- 5% on average, and limits of detection were <2 ng/g for nearly all pesticides studied. The DSI/GC/ MS-MS approach for targeted pesticides is quantitative, confirmatory, sensitive, selective, rugged, rapid, simple, and inexpensive.     

Analysis of linear alkylbenzenesulfonates in water samples by large-volume injection-port derivatization and gas chromatography-mass spectrometry.

This work presents a modified method to analyze linear alkylbenzenesulfonates (LASs) in water samples. The method involves extraction of samples by a graphitized carbon black (GCB) cartridge, and direct derivatization in the GC injection port using a large-volume (10-20 microl) direct sample introduction (DSI) device with tetraalkylammonium (TAA) salts. The analytes were then identified and quantitated by ion-trap GC-MS. The large-volume DSI injection-port derivatization technique provides sensitivity, fast and reproducible results for LAS residues, to quantitation at 0.1 microg/l in 200 ml of water samples. The retention effect of TAA salts in the injection port was not detected. Enhanced selected mass chromatograms of [M-55]+ ions of butylated C10-C13 LASs by electron impact ionization MS allows one to determine LAS residues at trace levels in environmental samples. Recovery of total LASs in spiked variety water samples ranged from 89 to 112% while RSDs ranged from 2 to 13%.     

A computer-controlled direct sample insertion device for inductively coupled plasma-mass spectrometry

A direct sample insertion (DSI) device has been developed for application to inductively coupled plasma-mass spectrometry (ICP-MS). In a DSI device for use with ICPs, the sample is placed into or onto a probe with subsequent introduction of the sample carrying probe, via the central tube of the ICP torch, into the plasma. A mechanical, stepper-motor driven, computer controlled DSI device and software support system has been designed and developed that can easily be attached to a commercial ICP-MS system (Perkin-Elmer/SClEX Elan). This system allows the direct introduction of microliter volumes of liquids and milligram quantities of powdered/solid samples into the ICP-MS with little or no sample pre-treatment.     

Flame AAS/flame AES for trace determination in fresh and used lubricating oils with sample introduction by hydraulic high-pressure nebulization

In hydraulic high-pressure nebulization (HHPN) an aerosol is produced by means of an HPLC-pump and a special nebulization nozzle, applying a pressure of about 200 bar. This spray technique has been employed for sample introduction of mineral oil samples in flame atomic absorption/flame emission spectrometry. The determination of the trace elements Al, Cr, Cu, Fe, K, Na, Ni, Pb, Si and V has been investigated. Viscosity hardly acts upon the sensitivity of the determination, thereby avoiding a time consuming dilution of oil samples. By means of two interconnecting sampling valves a calibration method based on the standard addition technique can be performed which is both simple and easy to carry out. In samples of used oils, results for Cu and Pb equalled those of XRF-analysis. Regarding Fe traces, data obtained from AAS and XRF measurement correlate. In comparison with sample uptake by pneumatic nebulization, which is restricted to diluted oil samples, detection limits decrease by a factor of 2 to 4, indicating the dilution required in pneumatic nebulization.     

Analysis of nonylphenol polyethoxycarboxylates and their related metabolites by on-line derivatization and ion-trap gas chromatography-mass spectrometry

This study presents a modified method to analyze nonylphenol polyethoxycarboxylates (NPEC) and their related metabolites (carboxyalkylphenol ethoxycarboxylates (CNPEC)) in water samples. The method involves extraction of samples by a graphitized carbon black (GCB) cartridge, and direct derivatization in the GC injection-port using a large-volume (10-20 microl) direct sample introduction (DSI) device with tetraalkylammonium (TAA) salts. The analytes are identified and quantitated by ion-trap GC-MS. The large-volume DSI injection-port derivatization technique provides sensitivity, fast and reproducible results for NPEC and their metabolites, to quantitation at 0.1 microg/l in 200 ml of water samples. The retention effect of TAA salts in the injection-port is not detected. In addition, the significant [M-29]+ ions and molecular ions of butylated NPEC and CNPEC residues are observed. Recovery of NP1EC in spiked water samples ranges from 90 to 108%. Moreover, relative standard deviations of replicate analyses ranges from 1 to 9%. However, unsatisfactory on-line derivatization of CNPEC residues is observed. This finding maybe owing to their lesser dissociation with the ion-pair reagent in chloroform.     

Flame AAS/flame AES for trace determination in fresh and used lubricating oils with sample introduction by hydraulic high-pressure nebulization

In hydraulic high-pressure nebulization (HHPN) an aerosol is produced by means of an HPLC-pump and a special nebulization nozzle, applying a pressure of about 200 bar. This spray technique has been employed for sample introduction of mineral oil samples in flame atomic absorption/flame emission spectrometry. The determination of the trace elements Al, Cr, Cu, Fe, K, Na, Ni, Pb, Si and V has been investigated. Viscosity hardly acts upon the sensitivity of the determination, thereby avoiding a time consuming dilution of oil samples. By means of two interconnecting sampling valves a calibration method based on the standard addition technique can be performed which is both simple and easy to carry out. In samples of used oils, results for Cu and Pb equalled those of XRF-analysis. Regarding Fe traces, data obtained from AAS and XRF measurement correlate. In comparison with sample uptake by pneumatic nebulization, which is restricted to diluted oil samples, detection limits decrease by a factor of 2 to 4, indicating the dilution required in pneumatic nebulization.     

Determination of arsenic by inductively coupled plasma mass spectrometry--comparison of sample introduction techniques

A comparison is made of four sample introduction techniques for the determination of As by inductively coupled plasma mass spectrometry. The techniques studied were 1) flow injection with pneumatic nebulization (FIA-PN), 2) direct electrothermal vaporization (ETV), 3) continuous hydride generation (HG) and 4) hydride generation with in situ trapping followed by electrothermal vaporization (HG-ETV). It was found that FIA-PN and ETV gave similar detection limits in concentration units (about 20 pg mL(-1)), although ETV had a much lower absolute detection limit (0.2 pg). Sample introduction by hydride generation gave an inferior detection limit (100-200 pg mL(-1)), also in combination with in situ trapping and ETV, owing to the blank signal from traces of As in NaBH4 which is difficult to eliminate. The results indicate that the more elaborate sample introduction techniques based on ETV and HG may not offer significant advantages compared to normal solution nebulization for the determination of As in simple sample matrices such as natural fresh waters, where matrix removal is not required.     

Direct determination of trace amounts of sodium in water-soluble organic pharmaceuticals by microwave induced plasma atomic emission spectrometry

The direct determination of trace sodium by microwave induced plasma atomic emission spectrometry (MIP-AES) in water-soluble organic substances utilized in pharmaceutical preparations was developed. No decomposition of the organic constituents was required. Samples were dissolved with water and introduced to the plasma after ultrasonic nebulization without desolvation. A limit of detection (3sigma) of 0.91-3.0 ng ml(-1) was obtained under experimental conditions. The quantitative MIP-AES procedure involved the standard addition method. The sodium content determined in reference material NIST SRM 1568A Rice Flour agreed with the certified value (6.6+/-0.8 mug g(-1)). Physical and chemical interferences were investigated. It was found for the microwave plasma that it is possible to introduce organic substances solutions of concentration up to 5% without sensitivity losses. This direct technique is fast and sensitive and helps to reduce contamination connected with the sample preparation procedure.     

The Application of Chemical Modification in Electrothermal Vaporization-inductively Coupled Plasma Atomic Emission Spectrometry

Electrothermal vaporization (ETV) as a means of sample introduction for inductively coupled plasma atomic emission spectrometry (ICP-AES) has been paid great attention by many researchers since its first report in 1974. It can offer many advantages over conventional pneumatic nebulization method of sample introduction. These include:high transport efficiency, small amount sample required, low absolute detection limit and the ability to analyse both liquid and solid samples. Recent developments of this technique have been reviewed by Carey and Caruso, Hu et al and Moens et al, the authors summarized most of its crucial aspects.     

Investigation of HfO(+) interference in the determination of platinum in a catalytic converter (cordierite) by inductively coupled plasma mass spectrometry

The determination of Pt in cordierite is subject to strong interference by spectral overlap from HfO(+) ions with all Pt isotopes. Two mathematical correction methods based on the HfO(+)Hf(+) ratio and a method for the chemical separation of Hf based on adsorption chromatography and isotope dilution were investigated to correct for this interference. Flow infection was used to prevent clogging of the cone orifice. To enhance the sensitivity and thus lower the detection limit, thermospray nebulization was used for sample introduction and the method was compared with pneumatic nebulization. In addition, the memory effects were evaulated for both systems. Analysis of artificial solutions (1 ng Pt ml(-1)) yielded results within 3% of the true value. Th Pt content (ca. 50 ng g(-1)) of a cordierite sample, previously exposed to exhaust gases, could be determined with precisions of about 10-25% and the results agreed with earlier determinations by other workers.     

Characterization of aerosols generated by thermospray nebulization for atomic spectroscopy

The performance of an inductively coupled plasma (ICP) for atomic emission spectroscopy (AES) is strongly dependent upon the sample introduction system. The Thermospray Vaporizer has recently been shown to yield enhanced sensitivity compared to conventional pneumatic nebulizers when used as a sample introduction source for the ICP. This report is a study of the properties of the aerosols produced by the thermospray. Aerosol particle diameter distributions have been related to droplet size distribution and nebulization efficiencies as a function of the relevant variables of the nebulization system. The results help explain high emission intensities and lower detection limits achieved using the thermospray. The higher efficiencies with thermospray, compared to conventional pneumatic nebulization, also makes the thermospray a prime candidate for sample introduction into molecular gas ICPs.     

Cr(III)/Cr(VI) determination in waste water by ICP/AES with on-line HPLC (HHPN) sample introduction

Using hydraulic high-pressure nebulization (HHPN) for sample introduction, an on-line high-pressure flow system (HPLC system) becomes a functional component of the ICP spectrometer. By placing additionally an HPLC column between the sample valve and the high-pressure injection/nebulization nozzle, an improved species analysis is attained. An example is given by on-line separation and determination of Cr(III)/Cr(VI) in real waste water samples with ICP/AES. The detection limit of each Cr oxidation state is 4 μg L^–1 with an analysis cycle time of 5 min. In comparison to conventional coupling of HPLC and ICP spectrometry a considerably higher sensitivity is achieved. Using spiked samples the recovery of HHPN-ICP/AES was on an average better than 98% in contrast to only 79% for Cr(VI) determination with a UV photometric reference method. Due to chromatographic separation of Cr(VI) from matrix components and Cr (III), the technique no longer shows the typical spectral interferences caused by Ca (267.716 nm Cr line) and Fe (283.563 nm Cr line).     

Direct determination of impurities in high purity silicon carbide by inductively coupled plasma optical emission spectrometry using slurry nebulization technique

A novel method for the determination of Al, Ca, Cr, Cu, Fe, Mg, Mn, Ni and Ti in high purity silicon carbide (SiC) using slurry introduction axial viewed inductively coupled plasma optical emission spectrometry (ICP-OES) was described. The various sizes of SiC slurry were dispersed by adding dispersant polyethylene imine (PEI). The stability of slurry was characterized by zeta potential measurement, SEM observation and signal stability testing. The optimal concentration of PEI was found to be 0.5 wt% for the SiC slurry. Analytical results of sub-μm size SiC by the slurry introduction were in good accordance with those by the alkaline fusion method which verified that determination could be calibrated by aqueous standards. For μm size SiC, results of most elements have a negative deviation and should be calibrated by the Certified Reference Material slurry. Owing to a rather low contamination in the sample preparation and stability of the slurry, the limits of detection (LODs), which are in the range of 40-2000 ng g⁻¹, superior to those of the conventional nebulization technique by ICP-OES or ICP-MS.     

An Ultrasonic Nebulizer as the Sample Introduction Device for High Performance Liquid Chromatography Combined with Inductively Coupled Plasma Atomic Emission Spectrometry

A preliminary study of an ultrasonic nebulizer as the sample introduction device for the chromatographic speciation of ionic compounds containing As, Se and Cr is described. The analytical figures of merit observed during chromatographic separations with an ultrasonic nebulizer interfaced to an inductively coupled plasma-atomic emission spectrometer (ICP-AES) were comparable to or better than conventional pneumatic nebulization and other sample introduction techniques, in terms of organic solvent tolerance, sensitivity, detection limits and reproducibility. The limits of detection were in the ranges of 10-14 ppb for Se, 30-40 ppb for As, and 8-10 ppb for Cr.     

Simultaneous determination of hydride forming (As, Bi, Ge, Sb, Se, Sn) and Hg and non-hydride forming (Ca, Fe, Mg, Mn, Zn) elements in sonicate slurries of analytical samples by microwave induced plasma optical emission spectrometry with dual-mode sample introduction system

A slurry sampling method for the simultaneous determination of hydride forming (As, Bi, Ge, Sb, Se, Sn) and Hg and non-hydride forming (Ca, Fe, Mg, Mn, Zn) elements, without total sample digestion has been developed using the commercial dual-mode sample introduction system (MSIS) coupled with microwave induced plasma optical emission spectrometry (MIP-OES) from biological and environmental reference materials and real samples. The main advantage of this system is its simultaneous determination of elements that form volatile vapor species and elements that do not, without any instrumental changes. Optimization of reaction, nebulization and instrumental conditions was performed to characterize the new system. Slurry concentration up to 4% m/v (particles < 100 μm) prepared in 10% HNO₃ containing 100 μL of decanol, by application of ultrasonic agitation, was used with calibration by the standard addition technique. An ultrasonic probe was used to homogenize the slurry in the quartz cup just before its introduction into the reaction/nebulization system; the multimode sample introduction system (MSIS) combines the benefits of nebulization and vapor generation in a single device. Detection limits (LOD, 3σ_blank, peak area) of 0.07, 0.29, 0.25, 0.10, 0.12, 0.14, 0.11, 0.28, 0.42, 0.02, 0.21 and 0.34 μg g^− 1 were obtained for As, Bi, Ge, Sb, Se, Sn, Hg, Ca, Fe, Mg, Mn and Zn, respectively. The relative standard deviations were ca. 10%, adequate for slurry analysis. To test the accuracy, six certified reference materials were analyzed with the analyte concentrations mostly in the μg g^− 1 level. Measured concentrations are in satisfactory agreement with certified values for the biological reference materials (LUTS-1, DOLT-2) and environmental reference materials (PACS-1, GWB 07302, NIST 2710, NBS 1633b), all adequate for slurry sampling. The method was successfully applied to the determination of the elements in real samples (coal fly ash, lake sediment, sewage). The method requires small amounts of reagents and reduces contamination and losses.     

On-line derivatization gas chromatography with furan chemical ionization tandem mass spectrometry for screening of amphetamines in urine

A simple alternative method with minimal sample pretreatment is investigated for screening of amphetamines in small volume (using only 20 microL) of urine sample. The method is sensitive and selective. The method uses gas chromatography (GC) direct sample introduction (DSI) for on-line derivatization (acylation) of amphetamines to improve sensitivity. Furan as chemical ionization (CI) reagent in conjunction with tandem mass spectrometry (MS/MS) is used to improve selectivity. Low background with sharp protonated molecular ion peaks of analytes is the evidence of improvement in sensitivity and selectivity. Blank urine samples spiked with known amounts of amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, 3,4-methylenedioxymethamphetamine and 3,4-methylenedioxyethylamphetamine is analyzed. Selected ion monitoring of the characteristic product ions (m/z 119+136+150+163) using furan CI-MS/MS in positive ion mode is used for quantification. Limits of detection (LOD) between 0.4 and 1.0 ng mL(-1) and limits of quantitation (LOQ) between 1.0 and 2.0 ng mL(-1) are established. Linear response over the range of 1-1000 ng mL(-1) (r(2)>0.997) is observed for all analytes, except for methamphetamine (2.0-1000 ng mL(-1)). Good accuracy between 86 and 113% and precision ranging from 4 to 18% is obtained. The method is also tested on real samples of urine from suspected drug abusers. This method could be used for screening and determination of amphetamines in urine samples, however needs additional work for full validation.     

Cr(III)/Cr(VI) determination in waste water by ICP/AES with on-line HPLC (HHPN) sample introduction

Using hydraulic high-pressure nebulization (HHPN) for sample introduction, an on-line high-pressure flow system (HPLC system) becomes a functional component of the ICP spectrometer. By placing additionally an HPLC column between the sample valve and the high-pressure injection/nebulization nozzle, an improved species analysis is attained. An example is given by on-line separation and determination of Cr(III)/Cr(VI) in real waste water samples with ICP/AES. The detection limit of each Cr oxidation state is 4 μg L^–1 with an analysis cycle time of 5 min. In comparison to conventional coupling of HPLC and ICP spectrometry a considerably higher sensitivity is achieved. Using spiked samples the recovery of HHPN-ICP/AES was on an average better than 98% in contrast to only 79% for Cr(VI) determination with a UV photometric reference method. Due to chromatographic separation of Cr(VI) from matrix components and Cr (III), the technique no longer shows the typical spectral interferences caused by Ca (267.716 nm Cr line) and Fe (283.563 nm Cr line). Received: 2 August 1997 / Revised: 11 October 1997 / Accepted: 21 October 1997     

等离子体原子光谱分析中溶液样品雾化进样方法的新进展

对近年来等离子体原子光谱分析中溶液样品引入方法的新进展作了综述，其中包括气动雾化法、超声雾化法、热雾化法、悬浆雾化法、高水压雾化法及电喷雾法等。文中还根据本课题组多年来的研究经验对每种方法的优缺点及其应用作了简要的介绍和评论。