Combination of the advantages of chromatographic methods based on active components for the quality evaluation of licorice

A rapid, improved and comprehensive method including high‐performance thin‐layer chromatography, fingerprint technology and single standard to determine multiple components was developed and validated for the quality evaluation of licorice. In this study, a newly developed high‐performance thin‐layer chromatography method was first used for authentication of licorice, which achieved simultaneous identification of multiple bands including five bands for known bioactive components by comparing their retention factor values and colors with the standards. For fingerprint analysis, 8 of 16 common peaks were identified. Simultaneously, similarity analysis which showed very similar patterns and hierarchical clustering analysis were performed to discriminate and classify the 27 batches of samples. Additionally, the single standard to determine multiple components method was first successfully achieved to quantify the eight important active markers in licorice including liquiritin apioside, liquiritin, isoliquiritin apioside, isoliquritin, neoisoliquiritin, liquiritigenin, isoliquiritigenin and glycyrrhizic acid. The easily available glycyrrhizic acid was selected as the reference substance to calculate relative response factors. Compared with the normal external standard method, this alternative method can be used to determine the multiple indices effectively and accurately. The validation result showed that the developed method was specific, accurate, precise, robust and reliable for the overall quality assessment of licorice.     

Determination of Te,Bi, Ni,Sb and Au by X-ray fluorescence spectrometry following electroenrichment on a copper cathode

The electrodepositons of Te, Bi, Ni, Sb and Au from aqueous solution of pH = 1 on the cathode surface have been studied for X-ray fluorescence analysis (XRF). A special holder for a copper electrode has been constructed to perform the electrodeposition process on only one side of the electrode. After electrolysis, the copper electrode can be easily removed from the holder; after rinsing it with water and drying it can be analyzed by XRF. The proposed method of sample preparation and preconcentration of Te, Bi, Ni, Sb, Au provides suitable samples which are devoid of the negative and undesirable effects of XRF analysis, such as particle size and matrix effects. The influence of time on the deposition yield has been examined. The method of preconcentration is efficient. The inhomogeneity of the prepared specimens has been studied using internal standard method. The calibration is based on using synthetic standards, certified reference materials and standard addition method. The best results are achieved by the standard addition method. The agreement between results obtained with XRF analysis and certified values is satisfactory and indicates the usefulness of the proposed method for determination of Te, Bi, Ni, Sb and Au in anode slime.     

Chemical analysis of raw, dry-roasted, and honey-roasted licorice by capillary electrophoresis

In herbal medicine, licorice is usually processed using a roasting procedure which might modify the chemical compositions in licorice. To test this hypothesis, licorice root samples were roasted under various conditions (with or without honey) and subsequently extracted by refluxing with 95% ethanol. The analysis of chemical compositions of licorice root extracts was achieved by capillary electrophoresis. The running buffer has been optimized to be 50 mM sodium tetraborate (pH 9.01) containing 5 mM beta-cyclodextrin. Thermal decomposition of glycyrrhizin, which was a major ingredient in licorice, was first studied in detail, indicating the conversion of glycyrrhizin to glycyrrhetinic acid. The licorice extracts were then analyzed to indicate the above thermal conversion did occur in the licorice samples. This finding may shed some light on understanding the differences in the therapeutic values of raw versus roasted licorice in herbal medicine.     

Analysis of phenolic and triterpenoid compounds in licorice and rat plasma by high‐performance liquid chromatography diode‐array detection,time‐of‐flight mass spectrometry and quadrupole ion trap mass spectrometry

High‐performance liquid chromatography with diode‐array detection (HPLC/DAD), time‐of‐flight mass spectrometry (HPLC/TOFMS) and quadrupole ion trap mass spectrometry (HPLC/QITMS) were used for separation and identification of several compounds in licorice and rat plasma after oral administration of the herbal extract. Three phenolic compounds and one triterpenoid in licorice extract were unambiguously identified by comparing with the standard compounds. A formula database of known compounds in licorice was established, against which the other 42 compounds were identified effectively based on the accurate extract masses and formulae acquired by HPLC/TOFMS. In order to differentiate the isomers, tandem mass spectrometry was also used. The deduced fragmentation behaviors in QITMS were used to distinguish seven groups of isomers in licorice. By means of the three detectors, 46 compounds in licorice were identified. After oral administration of the extract, 25 compounds in rat plasma were detected and identified by comparing and contrasting the compounds measured in licorice with those in the plasma samples by HPLC/TOFMS. It is concluded that a rapid and effective method based on three analytical techniques was established, which is useful for identification of multiple compounds in licorice in vitro and in vivo. The result should be very useful for the quality control and curative mechanism study of licorice. Copyright © 2009 John Wiley & Sons, Ltd.     

Determination of Major and Minor Elements in Granite by Inductively Coupled Plasma and X-ray Fluorescence Spectrometry

Abstract

The development and evaluation of an analytical method for the determination of major and minor elements in granite by ICP-AES and XRF are described. The method applies a standard addition method to generate calibration standards for XRF measurements by ICP-AES from samples to be analyzed. Reliable results were obtained by using simple versions of ICP and XRF, and combined with the pressed-powder pellets for sample preparation. Least squares data for parameters measured by this method vs. reported value for a granite standard reference material gave a slope of 1.002 ± 0.005 and an intercept of -0.029 ± 0.07. The coefficients of variation vary between 0.53% for the largest oxide and 8.3% for the lowest oxide.     

Determination of trace elements in Syrian medicinal plants and their infusions by energy dispersive X-ray fluorescence and total reflection X-ray fluorescence spectrometry

X-ray fluorescence (XRF) and total-reflection X-ray fluorescence (TXRF) techniques suited well for a multi-element determination of K, Ca, Mn, Fe, Cu, Zn, Rb, and Sr in some Syrian medicinal plant species. The accuracy and the precision of both techniques were verified by analyzing the Standard Reference Materials (SRM) peach-1547 and apple leaves-1515. A good agreement between the measured concentrations of the previously mentioned elements and the certified values were obtained with errors less than 10.7% for TXRF and 15.8% for XRF. The determination of Br was acceptable only by XRF with an error less than 24%. Furthermore, the XRF method showed a very good applicability for the determination of K, Ca, Mn, Fe, Cu, Zn, Rb, Sr, and Br in infusions of different Syrian medicinal plant species, namely anise (Anisum vulgare), licorice root (Glycyrrhiza glabra), and white wormwood (Artemisia herba-alba).     

Trace element analysis of Geological Survey of Japan silicate reference materials: Comparison of SSMS with ICP-MS data and a critical discussion of compiled values

The concentrations of 29 trace elements have precisely been determined in 15 international silicate reference materials of the Geological Survey of Japan by spark source mass spectrometry (SSMS) and inductively coupled plasma-mass spectrometry (ICP-MS). The samples span a wide range of concentration levels. Most of the SSMS and ICP-MS values agree within analytical error down to the ppb concentration range. Of particular interest are the data for Nb, Y, Zr, Th, U in samples with low trace element concentrations (<1–10 ppm), for which published data are quite variable. The results obtained generally agree with those of modern sensitive analytical techniques (such as ICP-MS, HPLC), but are often much lower than standard XRF and compiled reference values. It is suggested that these discrepancies arise from calibration and analytical problems for standard XRF and ICP-MS and incorporation of these data into compiled values. More judicious selection of data based on analytical methodology and geochemical behaviour is required for samples which challenge the detection limits of standard analysis.     

Basic theory and methods of X-ray fluorescence analysis

Summary The Soviet analysts' major advances in both theory and application of X-ray fluorescence (XRF) analysis are reviewed. The focus is on issues concerning XRF analysis of heterogeneous samples, a theoretical account of interelement effects, and employment of scattered radiation as the internal standard.

---

Grundlegende Theorie und Methoden der Röntgenfluorescenz-Analyse

     

X射线荧光光谱法测定萤石中CaF2、CaCO3、S、Fe及SiO2

X射线荧光光谱法分析是目前快速分析方法之一,精密度受基体效应、均匀性、元素间干扰等影响。采用粉末压片法制备样品,用X射线荧光光谱法直接测定F、Ca元素,得出CaF_2及CaCO_3含量,并同时分析萤石中S、Fe、SiO_2的含量。精密度实验表明,待测元素的相对标准偏差均低于0.66%(RSD,n=10),能满足萤石中各元素的检测要求。     

Bulk and microprobe analysis for trace elements with synchrotron radiation

Blood serum samples were irradiated by monochromatic synchrotron radiation (15 keV) and by 2.4-MeV protons to compare their performance for the detection of trace elements by x-ray fluorescence (XRF) spectrometry. Absolute concentration assignment was based on the addition of an internal standard and on a method which uses the incoherent and coherent radiation as a flux monitor of the incoming beam. Preliminary experiments with a synchrotron XRF microprobe are reported.     

X-ray fluorescence as a method of monitoring metal catalyst content during the purification of carbon nanotubes

There have been several studies that suggest that catalyst metals in carbon nanotubes (CNTs) may pose a health threat. As there are many potential applications of CNTs in medicine, it is important to be able to quantitatively determine the amount of metal catalyst contained in a CNT sample. The relative catalyst content of carbon nanotube samples synthesized via arc-discharge has been determined at various stages of the purification process using X-ray fluorescence (XRF) analysis. Purification was achieved by immersing samples in heated nitric acid. The intensities of the nickel K_α X-rays were studied to determine the relative catalyst content in the samples. Scanning electron microscopy (SEM) images of purified nanotubes have been compared to the images of a sample that has been irradiated by 0-15 keV bremsstrahlung in order to determine if the XRF analysis of the nanotubes is in any way destructive. No obvious structural defects were observed as the result of irradiation.     

X荧光光谱法测定锡酸铅TDI还原型催化剂中锡和铅含量

报道了一种准确度高、分析步骤简单的锡酸铅TDI还原型催化剂中锡和铅含量的X射线荧光光谱方法（XRF）．设计制备了标准样品,研究了仪器测试条件下元素峰位的选择和背景扣除方法．结果表明：X荧光光谱法在不破坏样品的前提下完成对二氧化锡和铅含量的同时测定,重复实验10次,Pb实验相对标准偏差为0．37％;SnO2实验相对标准偏差0．61％。     

X-ray fluorescence analysis for the study of fragments pottery excavated at Tell Jendares site, Syria, employing multivariate statistical analysis

X-ray fluorescence analysis study of 44 archaeological pottery samples collected from Tell Jendares site north-west of Syria has been carried out. Four samples of the total previous investigated samples were obtained from the kiln found on Tell Jendares site. Seventeen different chemical elements were determined. The XRF results have been processed using two multivariate statistical cluster and factor analysis methods in order to determine the similarities and correlation between the selected samples based on their elemental composition. The methodology successfully separates the samples where three distinct chemical groups were discerned.     

X射线荧光光谱法测定电解锰中锰、硅、磷和铁含量

熔融制样X射线荧光光谱法测定电解锰中锰、硅、磷和铁含量。用熔融后的四硼酸锂制作铂金坩埚保护层,以BaO2做氧化剂,在马弗炉内通过逐渐升温来氧化电解锰,然后熔融制取玻璃熔片,用X射线荧光(XRF)光谱法分析电解锰中锰、硅、磷和铁含量。锰、硅、磷和铁的相对标准偏差RSD分别为0.23%、2.82%、0.31%和0.53%。与其它分析方法比较,其结果更稳定。有效消除了电解锰熔融制样过程中的坩埚腐蚀问题,分析误差可完全控制在国家相关标准允许的范围内,实现了电解锰中各元素的快速准确测定。     

X-ray fluorescence determination of total sulfur in fly ash

Standard addition, double dilution and standard calibration were used for x-ray fluorescence (XRF) determinations of sulfur in fly ashes. Samples were analysed as pellets prepared by mixing with acrylate copolymer or with microcrystalline cellulose (in the case of the double dilution method). Lithium sulfate was used for the standard addition method and also as standard with known sulfur content for the double dilution method. Fly ashes analysed by optical emission spectrometry with an inductively coupled plasma (ICP-OES) were used as standards for the standard calibration XRF method. Sulfur was determined in the range of ca. 10^–1–10⁰ % S. For the fly ashes from the North-Bohemian brown coals, the differences between the XRF determinations and the ICP-OES determinations ranged from ca. 1.4 to 10% rel. and precision (repeatability) was better than 10% (RSD). The standard calibration method is suitable for routine analyses of real samples of similar nature. The methods of standard addition and double dilution are rather laborious in sample preparation compared with the standard calibration. Received: 27 October 1998 / Revised: 5 March 1999 / Accepted: 11 March 1999     

X-ray fluorescent analysis on Indo-Pacific glass beads from Sungai Mas archaeological sites,Kedah, Malaysia

Sungai Mas was an ancient port-kingdom located on West Coast of Peninsula Malaysia in a district of Kota Kuala Muda, Kedah, Malaysia. The port-kingdom evolved as an entrepot since fifth century AD and continuously visited by international trader from India, China, Middle East and Europe until eighteenth century AD. Sungai Mas was also one of the Indo-Pacific beads making centers in Southeast Asia since sixth to thirteenth century AD and also produced pottery and brick. X-ray fluorescent analysis (XRF) on Sungai Mas Indo-Pacific beads is carried out to determine whether the glass beads originated from Arikamedu, India or locally made by community in Sungai Mas. Totally, twenty-two samples of beads and beads materials assayed by XRF were chosen. Contents of nine major elements and nine trace elements, which might be present of flux, stabilizer, colorants or opacifier were examined. The elements Si, Na, K, Ca, Fe, Al, Ti, Mn, Mg, Cu, Pb, Zr, Sr, Ba, La, U, Ni and Cr were detectable in all samples. The concentration of elements found are discussed in terms of flux, silica or lead base glass, color and/or opacity of the glass beads and glass samples. The result showed that Sungai Mas produced their own Indo-Pacific beads from sixth to thirteenth century AD.     

X-射线荧光光谱法测定钛铁中的硅、锰、磷、铝

介绍用X-射线荧光光谱仪测定钛铁中Si、Mn、P、Al含量的方法,通过试验确定了合适的研磨时间、压力和保压时间,用压片法制样,建立了各元素的工作曲线,各元素的测定范围分别为Si3.00%～6.00%,Mn1.00%～3.00%,P0.030%～0.070%,Al5.00%～9.00%。通过强度测量得到测定Si、Mn、P、Al的相对标准偏差分别为0.074%、0.308%、0.383%、0.040%,精密度满足测试要求。将该方法测定结果与化学法比对,准确度满足国家标准方法分析误差的要求。     

X射线荧光光谱熔融法测定锶永磁铁氧体中各组分含量

本文使用自制标准样品,采用混合熔剂熔融样品,用X射线荧光光谱法(XRF)测定锶永磁铁氧体半成品中Fe,Sr,Si等元素的含量.熔融制样有效地消除了矿物效应,并降低了基体效应的影响.实验结果表明,本法准确度高,重现性好,平行测定11次相对标准偏差(RSD)可达到0.1%.该方法用于实际样品分析,其结果与传统化学分析方法结...