The Solgel Preparation and Electric Properties of MnO2-doped PbTiO3 Ceramics

ＴｈｅＳｏｌ┐ｇｅｌＰｒｅｐａｒａｔｉｏｎａｎｄＥｌｅｃｔｒｉｃＰｒｏｐｅｒｔｉｅｓｏｆＭｎＯ２┐ｄｏｐｅｄＰｂＴｉＯ３ＣｅｒａｍｉｃｓＱＩＡＮＧＬｉａｎｇ－ｓｈｅｎｇ＊,ＦＵＨｏｎｇ－ｇａｎｇ＊＊ａｎｄＸＵＣｈｏｎｇ－ｑｕａｎ（Ｄｅｐａｒｔｍｅｎｔ...     

第一性原理计算钛酸铅A位掺杂对其负热膨胀性的影响

近年来,实验发现钛酸铅基材料具有负热膨胀性,且其热膨胀程度会受到掺杂元素的影响.目前所研究的A位掺杂体系中,仅Cd原子掺杂能使钛酸铅负热膨胀性增强.所以研究A位掺杂钛酸铅,比较Cd原子与其他原子在掺杂钛酸铅时化学键的异同,有助于深刻理解钛酸铅负热膨胀的本质.本文利用第一性原理,分别优化了Sr、Ba、Cd掺杂钛酸铅的晶格常数,计算了它们的态密度和电荷密度.结果表明Cd―O键的共价性强于Pb―O键,而Ba―O键和Sr―O键几乎呈离子性,Ba/Sr对Pb的替代削弱了化合物的共价性,降低了自发极化强度.与实验测量的热膨胀系数对比可以发现,A位原子与氧原子之间的共价性增强,化合物负热膨胀程度升高;若A位原子与氧原子之间的共价性削弱,负热膨胀程度降低.可见A位原子与氧原子之间的共价性影响了钛酸铅基化合物负热膨胀性.     

PbTiO3/SrTiO3(010)异质界面上的周期性失配位错及电子富集

It is important to determine the effects of misfit dislocations and other defects on the domain structure, ferroelectricity, conductivity, and other physical properties of ferroelectric thin films to understand their ferroelectric and piezoelectric behaviors. Much attention has been given to ferroelectric PbTiO₃/SrTiO₃ or PbZr_0.2Ti_0.8O₃/SrTiO₃ heterointerfaces, at which improper ferroelectricity, a spin-polarized two-dimensional electron gas, and other physical phenomena have been found. However, those heterointerfaces were all (001) planes, and there has been no experimental studies on the growth of (010) PbTiO₃/SrTiO₃ heterointerface due to the 6.4% misfit between two materials. In this study, we selected an atomically flat (010) PbTiO₃/SrTiO₃ heterointerface grown using a two-step hydrothermal method as the research subject, and this is the first experimental report on that interface. Interfacial dislocations can play a significant role in causing dramatic changes in the Curie temperature and polarization distribution near the dislocation cores, especially when the size of a ferroelectric thin film is scaled down to the nanoscale. The results of previous studies on the effects of interfacial dislocations on the physical properties of ferroelectric thin films have been contradictory. Thus, this issue needs to be explored more deeply in the future. This study used aberration corrected scanning transmission electron microscopy (STEM) to study the atomic structure of a (010) PbTiO₃/SrTiO₃ heterointerface and found periodic misfit dislocations with a Burgers vector of a[001]. The extra planes at the dislocation cores could relieve the misfit strain between the two materials in the [001] direction and thus allowed the growth of such an atomically sharp heterointerface. Moreover, monochromated electron energy-loss spectroscopy with an atomic scale spatial resolution and high energy resolution was used to explore the charge distribution near the periodic misfit dislocation cores. The fine structure of the Ti L edge was quantitatively analyzed by linearly fitting the experimental spectra recorded at various locations near and at the misfit dislocation cores with the Ti³⁺ and Ti⁴⁺ reference spectra. Therefore, the accurate valence change of Ti could be determined, which corresponded to the charge distribution. The probable existence of an aggregation of electrons was found near the a[001] dislocation cores, and the density of the electrons calculated from the valence change was 0.26 electrons per unit cell. Based on an analysis of the fine structure of the oxygen K edge, it could be argued that the electrons aggregating at the dislocation cores came from the oxygen vacancies in the interior regions of the PbTiO₃. This aggregation of electrons will probably increase the electron conductivity along the dislocation line. The physics of two-dimensional charge distributions at oxide interfaces have been intensively studied, however, little attention had been given to the one-dimensional charge distribution. Therefore, the results of this study can stimulate research interest in exploring the influence of the interfacial dislocations on the physics of ferroelectric heterointerfaces.     

钙钛矿铁电纳米片诱导的P (VDF-TrFE)取向生长

Ferroelectric polymers are particularly attractive for applications in flexible electronic devices, and controlling its crystalline phase growth is crucial for obtaining optimized ferroelectric properties. Herein we report that a very low introduction (0.2% (w)) of single-domain ferroelectric PbTiO₃ nanoplates can effectively mediate the nucleation and subsequent growth of a crystalline phase within P (VDF-TrFE) (denoted by PVTF), forming highly oriented films and significantly improving the ferroelectric properties due to an alignment of the polarization directions of the polymer and the nanoplates.     

First-principles Study on the Electronic and Bonding Properties of PbTiO3 (110) Polar Terminations

The electronic structures and bonding properties of the (110) polar terminations of cubic PbTiO₃ were examined by the first-principles calculations at the generalized gradient approximation level. Two stoichiometric (PbTiO and O₂) and three nonstoichiometric(TiO, Pb, and O) terminations were considered in this study. With the aid of the calculated electron density differences, atomic charges, band structures, and densities of states, the charge redistributions and electronic properties were evaluated in detail. Furthermore, based on the calculated results of the cleavage energies, relaxation energies, and surface energies of the investigated terminations, the charge compensation by the modification of the surface stoichiometry and the fillings of surface states were thermodynamically evaluated.     

两步互扩散法制备高性能CsPbCl3薄膜紫外光电探测器

紫外光电探测器无论在军用和民用上都有着巨大的应用前景,CsPbCl₃作为钙钛矿家族中形成能最大,化学性能稳定的成员,在可见光盲区的紫外光电探测器中有着很大潜在的应用价值。本文针对CsPbCl₃薄膜难以制备的问题,发展了一种两步互扩散溶液法,通过控制前驱体PbCl2的形貌,成功地制备了CsPbCl₃薄膜。利用扫描电镜、吸收光谱和X射线表征技术,证实了制备出的薄膜表面平整无孔洞、晶粒饱满和吸光度强。通过瞬态荧光和变激发光强的稳态荧光,揭示了薄膜具有载流子寿命长、缺陷态少等优异性能。最终构建出了响应度为0.75 A·W^?1的横向结构紫外光电探测器,为将来进一步发展高性能CsPbCl₃薄膜紫外光电探测器奠定了基础。     

喷雾热解制备稀土超细粉末(Ⅰ)——氧化钇粒子形态与形成机理

对Y(NO₃)₃·6H₂O的差热和热重分析表明,Y(NO₃)₃·6H₂O经脱水和热分解在580C以上完全分解为Y₂O₃.在此基础上,以Y(NO₃)₃·6H₂O为前驱体,采用喷雾热解过程制备出粒度为0.50～1.50μm的立方相球形Y₂O₃粉末.通过对产物粒子粒度的理论计算与实验结果的比较,推测Y₂O₃粒子形成机理符合液滴-粒子转变机理(One-Droplet-One-Particlemechanism).本喷雾热解过程同样适用于其它稀土超细粉末的制备,粒子粒度可以通过调节液滴尺寸和溶液浓度等操作条件进行控制.     

钙钛矿型复合氧化物CaVO3的制备及对氧还原反应的电催化性能

以五氧化二钒、硝酸钙、柠檬酸和草酸为原料,采用溶胶-凝胶法制备出CaVO₃的前驱体,在氩气保护下1000 ℃煅烧2 h,成功制备出目标产物CaVO₃.对前驱体和目标产物分别进行了傅里叶变换红外(FTIR)光谱、热重(TG)分析、X射线衍射(XRD)和电导率等表征.在1 mol·L^-1的KOH电解质溶液中测试了样品的氧还原反应(ORR)催化性能.结果表明,修饰电极上(ORR)的电子转移数是1.5-1.7,发生的是2电子还原.     

前驱体溶液pH值对V2O5-WO3/TiO2催化剂的低温NH3-SCR性能的影响

采用调节前驱体溶液pH值的方法制备了用于低温NH₃-SCR的V₂O₅-WO₃/TiO₂催化剂。通过XPS、Raman光谱、H₂-TPR、NH₃-TPD、NH₃-DRIFT、XRD及物理吸附等手段对催化剂进行了表征分析,并对其脱硝催化活性进行了测试。结果表明,前驱体溶液酸性的增强能够提高催化剂表面聚合态钒物种和V⁴⁺⁽³⁺⁾/V⁵⁺的比值以及表面酸性,增加活性位数量、降低反应的活化能、提高其脱硝催化性能。因此,通过提高前驱体溶液的酸性,有助于制备出脱硝活性较好的NH₃-SCR催化剂。     

MgF2改性Alq3纳米复合材料的制备及其对OLED抗老化性能的提高

提高有机电致发光器件(OLED)的稳定性和寿命是其市场化应用中需要解决的关键问题.本文从提高发光材料自身的稳定性出发,以Mg(CF₃COO)_2-x(CH₃COO)_x溶胶为前驱体,将其与8-羟基喹啉铝(Alq₃)混合浓缩成糊状后, 300 ℃真空烧结,经过MgF₂的生成和Alq₃的相变后,形成了一系列Mg含量不同的具有超结构ε相的纳米复合材料Alq₃-MgF₂.研究结果表明,相比于纯Alq₃, Alq₃-MgF₂纳米复合材料制备的OLED可以很好地保持Alq₃的发光特性,同时,其抗老化性能得到显著提高.特别是, Mg(CH₃COO)₂投料量为Alq₃的5% (摩尔分数)时,所得Alq₃-MgF₂纳米复合材料制备的器件抗老化性能最优,在空气中老化72 h,最大发光亮度仍保持在起始值的93.5%;而Alq₃制备的OLED在空气中老化24 h后基本失活.     

Facile Chemical Conversion Synthesis and Luminescence Properties of Uniform YF3 Nanowires

Well-dispersed YF₃ nanowires were synthesized by a designed hydrothermal conversion method with Y(OH)₃ nanowires as precursor. Various equipments were used to characterize the samples. The results show that Y(OH)₃ nanowires precursor was prepared through a simple hydrothermal process, which then served as the precursor for the fabrication of YF₃ nanowires by a hydrothermal process. The whole process was carried out under aqueous conditions without any organic solvent, surfactant or catalyst. The conversion process from Y(OH)₃ precursor to YF₃ nanowires was investigated by time-dependent experiments. The possible formation mechanism of YF₃ nanowires was presented in detail. Under UV excitation, 5%(mass fraction) Eu³⁺ or 5%(mass fraction) Tb³⁺ doped YF₃ samples exhibit strong red or green emission, corresponding to the characteristic lines of Eu³⁺ and Tb³⁺, respectively. Moreover, the luminescence colors of the Eu³⁺ and Tb³⁺ codoped YF₃ samples can be tuned from red, yellow and green-yellow to green by simply adjusting the relative doping concentrations of the activator ions under a single wavelength excitation, which might find potential applications in the fields of, such as, light display systems and opto- electronic devices.     

微波液相法一步合成H3PW12O40/Bi2WO6光催化剂及其脱氮性能

采用微波液相法一步合成了固载型H₃PW₁₂O₄₀/Bi₂WO₆光催化剂. 通过紫外-可见漫反射光谱(UV-Vis)、 场发射扫描电子显微镜(SEM)、 表面积及孔隙度(BET)测定、 氨气程序升温脱附(NH₃-TPD)、 吡啶吸附红外光谱(Py-FTIR)和X射线衍射(XRD)对所合成催化剂的结构和性质进行了考察, 并以吡啶浓度为15 mg/g的模拟油对光催化剂的脱氮效果进行评价. 结果表明, 与传统浸渍固载法相比, 微波液相一步法不仅能高效合成H₃PW₁₂O₄₀/Bi₂WO₆光催化剂, 且所合成的催化剂能被低能量的光激发. 固载H₃PW₁₂O₄₀不但能提高Bi₂WO₆纳米颗粒的表面酸量, 还能通过改变Bi₂WO₆前驱液的酸强度来调控催化剂形貌. 在H₃PW₁₂O₄₀固载量为15%(质量分数), 微波功率为800 W, 反应时间为90 min条件下得到的H₃PW₁₂O₄₀/Bi₂WO₆的光催化脱氮活性最高, 在催化剂与模拟油质量比为1/300, 500 W氙灯光照60 min的最佳光催化反应条件下, 模拟油脱氮率达到92.63%.     

含氟CaO-P2O5-SiO2-Na2O-B2O3玻璃陶瓷的制备及性能表征

采用溶胶-凝胶法制备CaO-P₂O₅-SiO₂-Na₂O-B₂O₃体系前驱体粉末,用CaF₂替代部分CaO再次制备前驱体粉末。 通过TG-DSC分析确定结晶温度为865 ℃,经过热处理获得主晶相为Na₆Ca₃Si₆O₁₈的玻璃陶瓷。 通过X射线衍射(XRD)、傅里叶红外光谱(FTIR)、扫描电子显微镜(SEM)等技术手段及体外生物活性实验分析玻璃陶瓷的显微结构及性能。 结果表明,CaF₂的加入能提高玻璃陶瓷的体积密度、抗折强度和弹性模量,并且不会破坏玻璃陶瓷的生物活性。     

水合肼对锂离子正极材料LiNi_(0.5)Mn_(1.5)O_4性能的影响

以NiSO4和MnSO4为原料,在用共沉淀法经二次干燥制备锂离子电池正极材料LiNi0.5Mn1.5O4的前驱体时,加入水合肼进行还原处理.实验结果发现:经还原处理的前驱体制备正极材料LiNi0.5Mn1.5O4的充放电比容量远远高于同样条件下不经水合肼还原处理的前驱体制备的正极材料的充放电比容量,而且处理前驱体制备的正极材料在高倍率放电条件下电化学行为更好.粉末X射线衍射(XRD)和扫描电镜(SEM)测试结果表明,用还原剂水合肼处理的前驱体合成的样品为单一的尖晶石结构,晶粒呈规则的八面体形貌,没有杂质相,而未处理前驱体合成的样品则含有少量的杂质相.这种杂质相是在前驱体的制备过程中由于Mn(OH)2被O2氧化而形成难溶Na0.55Mn2O4.1.5H2O化合物,最终转变为Na0.7MnO2.05.     

Fabrication of novel threefold shape CeO2 dendrites: Optical and electrochemical properties

Threefold shape CeO₂ dendritic crystals were successfully prepared from a single precursor via a thermal decomposition route. The precursor was synthesized by a hydrothermal reaction using Ce(NO₃)₃6 H₂O with CO(NH₂)₂ at 150 °C in a water–TEA complex solution. The dendritic pattern of precursor almost remained in the as-prepared product. The optical absorption spectrum indicates that the CeO₂ dendrites have a direct band gap of 3.51 eV. The electrochemical tests show that the CeO₂ dendrites are a promising electrode material as they can deliver a large reversible discharge capacity of about 534 mAh g⁻¹.     

锂离子电池高镍正极材料掺铝的作用及掺铝方法的研究

为了探究铝对高镍层状氧化物在结构、形貌及性能方面的影响,本文采用两种不同的方式掺铝以制备NCA正极材料 （LiNi_0.8Co_0.15Al_0.05O₂）：一是固相法即将共沉淀合成的NC前驱体（Ni_0.84Co_0.16(OH)₂）在混锂烧结过程混入铝源（纳米Al₂O₃或Al(NO₃)₃）;二是共沉淀法即直接在合成前驱体过程中混入铝源（Al₂(SO₄)₃或NaAlO₂）即合成NCA前驱体（Ni_0.8Co_0.15Al_0.05(OH)_2.05）后再混锂烧结. 结果表明,掺铝能够降低阳离子混排程度、维持层状结构的稳定性,改善材料在充放电循环过程的放电电压及中值电压大幅下降的情况,提高其循环性能. 其中以NaAlO₂为铝源合成NCA前驱体所制备的NCA材料性能最优：在3.0 ~ 4.3 V充放电区间,0.1C倍率下首圈放电比容量达198 mAh·g^-1,首次库仑效率可达94.6%,1C倍率下循环200圈后容量保持率达70%.     

Pd/TiO2/C复合催化剂的制备及其在碱性溶液中对乙醇氧化的电催化性能

钛酸四丁酯前驱体水热合成制备纳米TiO₂颗粒,在TiO₂和Vulcan XC-72活性炭复合载体上液相还原负载Pd纳米颗粒,制得Pd/TiO₂/C复合催化剂. 通过透射电镜（TEM）和X射线衍射（XRD）测试表明其具有面心立方结构,Pd金属粒子（粒径约3 ~ 4 nm）均匀分散在锐钛矿型的纳米TiO₂和活性炭的复合载体上. 循环伏安和计时电流曲线测试表明,与相同Pd载量的Pd/C相比,20% Pd载量的Pd/TiO₂/C颗粒在常温常压下对乙醇的电催化氧化有很高活性和稳定性. 这主要归功于纳米TiO₂改变了Pd表面的电子特性,且增大了其比表面积.     

Tm3+掺杂的NaYF4微米颗粒中强烈的单带下转换荧光发射

采用柠檬酸钠辅助的水热方法合成了一系列具有不同长径比的Tm³⁺掺杂的β-NaYF₄ (NaYF:Tm³⁺)微米棒(盘).通过X射线衍射(XRD),扫描电子显微镜(SEM),能量色散X射线荧光光谱(EDX),傅里叶变换红外(FTIR)光谱和激光光谱学等手段对所制备的系列β-NaYF₄微米棒(盘)进行了表征. XRD和SEM分析表明β-NaYF₄微米棒(盘)的长径比依赖于前驱液的pH值,随着前驱液的pH值的增加,从长棒逐渐过渡到六角盘.光谱测量结果表明:一系列NaYF₄:Tm³⁺微米晶体在656 nm脉冲激光选择激发下,均获得了强烈的单带近红外下转换荧光发射.系统研究了激发波长、环境温度和颗粒长径比对NaYF₄:Tm³⁺微米晶体中单带近红外荧光强度的调控.结果表明:颗粒长径比越大,荧光强度越强.进一步探索了颗粒长径比调控的荧光增强机理,并提出了基于长径比控制的缺陷空位机理.     

New trend of radiation application to polymer modification — irradiation in oxygen free atmosphere and at elevated temperature

Polycarbosilane (PCS) fiber as a precursor for ceramic fiber of silicon carbide was cured by electron beam (EB) irradiation under oxygen free atmosphere. Oxygen content in the cured PCS fiber was scarce and the obtained silicon carbide (SiC) fiber with low oxygen content showed high heat resistance up to 1973 K and tensile strength of 3 GPa. Also, the EB cured PCS fiber with very low oxygen content could be converted to silicon nitride (Si₃N₄) fiber by the pyrolysis in NH₃ gas atmosphere, which was the new processing to produce Si₃N₄ fiber. The process of SiC fiber synthesis was developed to the commercial plant.

The other application was the crosslinking of polytetrafluoroethylene (PTFE). PTFE, which had been recognized to be a typical chain scission polymer, could be induced to crosslinking by irradiation at the molten state in oxygen free atmosphere. The physical properties such as crystallinity, mechanical properties, etc. changed much by crosslinking, and the radiation resistance was much improved.     

甲胺铅碘前驱体薄膜放置过程中物质结构演变及对后续钙钛矿薄膜的影响

系统研究了甲胺铅碘(MAPbI_3)前驱体薄膜在室温大气中放置过程的物质结构变化过程,发现甲胺铅碘前驱体进一步生成了更多的MAPbI_3钙钛矿,大约220 min后MAPbI_3钙钛矿不再增加而且仍有前驱体。此外还分析了这种结构演变对后续钙钛矿薄膜热退火结果的影响,发现放置后的甲胺铅碘前驱体薄膜退火过程中的X射线衍射强度和紫外-可见吸收均比新制备的薄膜的低,而且通过原子力表面形貌图的对比发现,放置后的薄膜热退火后的薄膜晶体尺寸远小于新制备的甲胺铅碘前驱体薄膜热退火后的晶体尺寸,放置后的薄膜晶体尺寸约为0.2μm,新制备的薄膜晶体尺寸约为1.1μm。主要原因在于:甲胺铅碘前驱体薄膜由于在室温大气中放置过程中多生成了部分甲胺铅碘(MAPbI_3),因此晶体成核数量较多,晶粒数量增加,晶体存在较多缺陷,薄膜结晶度低,所以退火时X射线衍射强度和光谱强度较低,同时晶粒尺寸变小。研究为探讨甲胺铅碘钙钛矿生成机理提供了新的思路和方向,属于甲胺铅碘钙钛矿薄膜性质的基础性研究,对实际生产和工业应用有一定指导意义。