Colloidal metal nanoparticles as a component of designed catalyst

Recent advances in the synthesis of colloidal metal nanoparticles of controlled sizes and shapes that are relevant for catalyst design are reviewed. Three main methods, based on colloid chemistry techniques in solution, i.e., chemical reduction of metal salt precursors, electrochemical synthesis, and controlled decomposition of organometallic compounds and metal-surfactant complexes, are used to synthesize metal nanoparticles. Their catalytic activity and selectivity depend on the shape, size and composition of the metal nanoparticles, and the support effect, as shown for many reactions in quasi-homogeneous and heterogeneous catalysis. A specially designed type of thermally stable catalysts--"embedded" metal catalysts, in which metal nanoparticles are isolated by porous support shells so that metal sintering is effectively avoided at high temperatures, are also introduced. The utilization of pre-prepared colloidal metal nanoparticles with tuned size, shape and composition as components of designed catalysts opens up new field in catalysis.     

Sol-Gel Preparation of Coating Films Containing Noble Metal Colloids

Coating films containing Au, Ag, Pt and Pd metal colloids have been prepared by sol-gel processing. It is shown that for oxide films the temperature where the metal particles are precipitated by heating in air depends on metal species: 200°C for Au, 600°C for Ag, 800°C for Pt and 1000°C for Pd. The use of reducing atmosphere lowers the temperature for formation of noble metal colloids. This procedure can be used for direct formation of metal colloids from metal ions in the film as well as reduction of oxide particles to metal particles in the film. For an organic-inorganic matrix, noble metal colloids are precipitated by thermal reduction or photo-reduction. Thermal reduction occurs as a result of reduction by decomposing organic matter. Photo-reduction occurs as a result of UV irradiation.     

Oxide- and zeolite-supported molecular metal complexes and clusters: physical characterization and determination of structure, bonding, and metal oxidation state

This article is a review of the physical characterization of well-defined site-isolated molecular metal complexes and metal clusters supported on metal oxides and zeolites. These surface species are of interest primarily as catalysts; as a consequence of their relatively uniform structures, they can be characterized much more precisely than traditional supported catalysts. The properties discussed in this review include metal nuclearity, oxidation state, and ligand environment, as well as metal-support interactions. These properties are determined by complementary techniques, including transmission electron microscopy; X-ray absorption, infrared, Raman, and NMR spectroscopies; and density functional theory. The strengths and limitations of these techniques are assessed in the context of results characterizing samples that have been investigated thoroughly and with multiple techniques. The depth of understanding of well-defined metal complexes and metal clusters on supports is approaching that attainable for molecular analogues in solution. The results provide a foundation for understanding the more complex materials that are typical of industrial catalysts.     

聚苯胺/贵金属复合纳米材料的可控合成及催化应用

导电高分子/贵金属复合纳米材料因其在催化、传感、表面增强拉曼、光热治疗等诸多领域的应用前景而受到广泛关注.本文主要介绍我们课题组近年来利用可控合成策略制备的负载型和包埋型两种结构聚苯胺/贵金属复合纳米材料,以及利用复合纳米材料的结构和功能特性,对其在多相催化领域的应用、结构与催化性能之间构效关系的探索.     

Application of the ΔΛ isomerism of octahedral metal complexes as a chiral source in photochemistry

Photochemical studies on the use of chiral metal complexes in homogenous and heterogeneous systems are surveyed and commented on their significance. A main focus is laid on the utility of the ΔΛ isomerism of octahedral metal complexes as a chiral source. The reported works demonstrate that chiral metal complexes are effective as a molecular element in achieving varieties of functions such as chiral discrimination, chiral transfer, sensing and photoresponsive guests for biomolecules or liquid crystals.     

Colloidal Metal Nanocatalysts: Synthesis,Characterization, and Catalytic Applications

Metal nanoparticles are key materials in heterogeneous catalysis due to their high catalytic activity and selectivity to the desired product. Accordingly, they are playing a pivotal role in most heterogeneous catalytic reactions that are steeply growing with the development of a colloidal synthetic protocol that enables fine control of size, shape, morphology and composition of metal nanoparticles at an atomic level. These colloidal metal nanoparticles can be dispersed on a rigid support such as mesoporous silica, metal oxide and zeolite, which utilizes metal nanoparticles as model heterogeneous catalysts in industrially important processes involving hydrogenation/dehydrogenation, isomerization and cracking. In this review article, we highlight the recent progress on general colloidal synthetic routes with technological advances in characterization tools that enable the atomic-scale observation of metal nanoparticles. Structure-dependent contributions on the control of product selectivity and turnover rate are also discussed by combining advanced ex situ and in situ surface characterization tools that can monitor the structural change of metal nanocatalysts as well as the evolution of reaction intermediates under the reaction conditions.     

Perturbation of the PET process in fluorophore-spacer-receptor systems through structural modification: transition metal induced fluorescence enhancement and selectivity

Several fluorescent signaling systems are built in the format fluorophore-spacer-receptor with ethylenediamine or N,N-dimethylethylenediamine as the receptor, anthracene as the fluorophore, and a methylene group as the spacer. The receptors are derivatized with different electron-withdrawing groups such as 4-nitrobenzene, 4-nitro-2-pyridine, and 2,4-dinitrobenzene, to perturb the photoinduced intramolecular electron transfer (PET) process from the nitrogen lone-pair to the fluorophore. The photophysical properties of these supramolecular systems and their fluorescence responses toward a number of quenching transition metal ions are reported. It is shown that the PET is highly efficient in the absence of a metal ion. With a metal ion input, the fluorescence can be recovered to a different extent depending on the nature of the metal and on the overall architecture of the system as well. Despite the possibility of strong interaction between the fluorophore and the metal ion, significant fluorescence enhancement is observed with quenching of paramagnetic transition metal ions. The complex stability data show that the stability constants for the metal ions showing fluorescence enhancement are of the order of 10(4) M(-1). This study shows that structurally simple fluorescent signaling systems for quenching transition metal ions can be built by maximizing the PET. It is also shown here that simple structural modification can make these systems highly specific for particular transition metal ions for potential applications in several contemporary areas of research.     

A review on the use of nanometals as catalysts for the thermal decomposition of ammonium perchlorate

In this review, an attempt to collect summarized literature data on catalytic effect of nanosized metals and nanoalloys on the thermal decomposition of ammonium perchlorates (AP) is made. Several experimental results show nanometals are more effective catalysts as compared to nanosized metal oxides. During decomposition process; metal react with oxygen containing species that are produced in decomposition process; and metal oxide is formed with large amount of heat which enhances the catalytic activity of metals as compared to metal oxide nanoparticles.     

Embedded cluster model studies of impurities at metal surfaces

A knowledge of the electronic properties of impurities at metal surfaces is of great value in the understanding of such important phenomena as chemisorption and surface segregation in alloys. We have adopted here a unified approach based on an Embedded Cluster model to study the properties of surface impurities. We have mainly concentrated on hydrogen impurities either adsorbed above the surface or incorporated into the bulk of metals. We have also considered the case of substitutional metal impurities at the surface of host metals.For hydrogen chemisorption we have considered such substrates as free-electron, transition and noble metals as well as bimetallic substrates composed of a single metal impurity in a host matrix or a metallic overlayer on a metal support. The electronic structure of the chemisorbed system is compared to photoemission data when available, from which interpretation of the details of the experimental spectra may be made. It is found that hydrogen adsorption on transition and noble metals results in the formation of a pair of bonding/antibonding resonances on either side of the metal d-band, while for hydrogen on free-electron metals a single hydrogen induced resonance is observed. One-electron energy differences between the H on jellium and H on metal systems are estimated and trends in such energies across the 3d and 4d transition series are compared to the trends in experimental chemisorption energies for H on these metals. The change in hydrogen chemisorption capacity of an inert substrate due to the introduction of chemically active impurities is investigated. The different properties of Pd overlayers with respect to Pd surfaces are also investigated. Interaction energies between adatoms on surfaces are estimated in order to predict the geometry of ordered structures on surfaces.One-electron heats of segregation for binary alloys are calculated. These show a strong solute surface segregation for noble metal impurities in group VIII metals, which is due to the higher d-band occupancy of the noble metal.     

Ligand-stabilized metal nanoparticles in organic solvent

This critical review reports the fundamental behavior of metal nanoparticles in different organic solvents, i.e., metal organosol. An overview on metal organosol and then their smart synthetic approaches, characterization, and potential applications in the fields of catalysis and spectroscopy with special emphasis on SERS are embodied. Aspects of organosol fabrication, stabilization, morphology control, growth mechanisms, and physical properties as mono- and bimetallic nanoparticles are discussed. The article inspires the repetitive usage of metal nanoparticles as stable deliverable organic and molecular compounds.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.