拮抗作用及传统医学的食物相克

微量元素的生理活性取决于其化合物的溶解性,配位状态、浓度、溶液酸度以及其它元素浓度,拮抗作用的本质是元素的结构－性质－活性关系。其机理主要包括直接反应、形成ＭＴ的抑制反应,相似元素竞争配位部位以及社会、心理、遗传和个体易感性等,传统医学煌食物相克的实质还是物质的拮抗作用。     

Power‐Law Kinetic Models for Synthesis of Ammonia Borane

In the past few years, there have been increasing numbers of studies for the production and dehydrogenation of ammonia borane (NH₃BH₃, AB), which has become a significant hydrogen storage material. However, kinetic model studies based on the synthesis of AB in the literature have not been encountered, though there are many kinetic modeling studies on dehydrogenation of AB (Akbayrak et al., Appl Catal B 2016, 198, 162–170; Choi et al., Phys Chem Chem Phys 2014, 16(17), 7959–7968; Esteruelas et al., Inorg Chem 2016, 55(14), 7176–7181; Park et al., Int J Hydrogen Energy 2015, 40(46), 16316–16322; Rakap, Appl Catal B 2015, 163, 129–134; Tonbul et al., Int J Hydrogen Energy 2016, 41(26), 11154–11162; Zhang et al., Int J Hydrogen Energy 2016, 41(39), 17208–17215). The paper describes the development of a kinetic model for synthesis of ammonia borane by using borohydride (NaBH₄) and ammonium salt (NH₄)₂SO₄. The synthesis of AB experiments was carried out at different temperature ranges between 25 and 50°C, different inlet molar ratios (NaBH₄/(NH₄)₂SO₄ = 1–4), and different molarities with respect to NaBH₄ (0.11–0.67 M NaBH₄). After the parametric experiments were conducted, empirical power law was evaluated for the synthesis reaction. The power‐law model represented the trends of the kinetics of the synthesis reaction and was reproduced as .     

用离子色谱法测定丙烯中痕量碱性氮化物

采用化学反应浓缩技术，将丙烯中痕量碱性氮化物转变为水溶性的阳离子，用离子色谱法进行测定。该法准确度高，操作简便，可测定丙烯中１０＾９ｇ／Ｌ的碱性氮化物，也可用于炼油厂及其它环境气氛中碱性氮化物的测定。     

Oxidation of CO by SO2: a theoretical study

The elementary reaction SO(2) + CO --> CO(2) + SO((3)Sigma) (1) and the subsequent reaction SO((3)Sigma) + CO --> CO(2) + S((3)P) (2) have been studied by the application of the Gaussian-3//B3LYP quantum chemical approach to characterize the potential energy surfaces and transition state kinetic analysis to derive rate coefficients. Reaction 1 is found to take place via two transition states (TS), a cis-OSOCO TS and a trans-OSOCO TS. Reaction via the cis-TS is concerted and takes place on a singlet surface. Intersystem crossing to the final products occurs after passage through the barrier on the singlet surface. The trans-TS leads to a very weakly bound singlet OSOCO intermediate that then passes through a second TS (on the triplet surface) to form the products. Reaction 2 takes place on triplet surfaces. There is a concerted reaction through a cis-SOCO TS and a weakly bound trans-SOCO has also been identified. Reaction 2 is analogous to the reaction CO + O(2)((3)Sigma) --> CO(2) + O((3)P) (3), and this reaction has been reinvestigated at a similar level of theory and the rate coefficient derived by quantum chemistry is compared with experiment. The sensitive effects of trace impurities such as H(2), H(2)O, and hydrocarbons on the accurate experimental determination of the rate coefficient of reaction 3 is discussed. Using rate coefficients for reactions 1 and 2 obtained via quantum chemical calculations, we have been unable to model the extent of decomposition of SO(2) measured in a shock tube study of reaction between SO(2) and CO [Bauer, S. H.; Jeffers, P.; Lifshitz, A.; Yadava, B. P. Proc. Combust. Inst. 1971, 13, 417]. In light of the known sensitivity of reaction 3 to trace impurities, we have incorporated trace amounts of H(2), CH(4), or H(2)O, together with our rate coefficients for (1) and (2), in a kinetic model of Alzueta et al. [Combust. Flame 2001, 127, 2234], which is then shown to be able to substantially model the SO(2) data of Bauer et al. In the course of this modeling study we also computed heats of formation for a number of sulfur-containing small molecules: HS, HSO, HSOH, HOSO, HS(2), HSO(2), HOSO(2), HOSOH, and HOSHO.     

21种桉叶微量元素含量测定及其意义

首次报道广东海康金星农场栽培的21种桉叶的微量元素含量和测定方法。结果认为：桉叶中含有Zn、Cu、Fe、Ca、Mn、Mg等人体必需的微量元素，其中Fe和Mn的含0量比其它微量元素高出3～4个热量级，而Fe和Mn是人体需要的微量元素，桉叶是富Fe、Mn的植物资源，它作为中药和动物鰕料添加剂是适合的。     

Note Phenomenology and Kinetics of the Reaction Between Sulfur and Atactic Polypropylene

While sulfur has been widely used as a dehydrogenating agent, in particular to obtain conjugated dienes [1-4], there is no kinetic information available about its effect on atactic polypropylene (APP), only Dontsov et al. [5] mentioning the products of this reaction, while Stefanovskaya et al. [6] studied the kinetics of the rather similar reaction with tetrachloro-o-benzoquinone. Also worth mentioning are the kinetic studies carried out by Dontsov et al. [7-11] on the reaction kinetics of polyethylene with sulfur, unsaturation, crosslinks, and mercaptides being the main products and the processes being first-order with activation energies of approximately 120 kJ/mol.     

聚乙烯乙二胺丙酰胺肟大孔螯合树脂的合成及其富集分离微量元素的应用研究

本文以大孔聚氯乙烯树脂为原料,合成聚乙烯乙二胺丙酰胺肟螯合树脂,建立了利用该螯合树脂富集分离20余种微量元素的ICP化学光谱法,讨论了其富集各待测元素的性能和机理,进行了螯合树脂的红外光谱等结构分析及样品中微量元素的富集和测定,结果较满意。     

Molecular dynamics simulations on the Escherichia coli ammonia channel protein AmtB: mechanism of ammonia/ammonium transport

Molecular dynamics (MD) simulations have been performed at the atomic level to study the ammonium/ammonia transport across the Escherichia coli AmtB membrane protein. Although ammonia primarily exists in the form of NH(4)(+) in aqueous solution, the recent X-ray structure determination of AmtB reveals that the ammonium/ammonia transporter proteins are ammonia-conducting channels rather than ammonium ion transporters [Khademi, S.; et al. Science 2004, 305, 1587; Zheng, L.; et al. Proc. Natl. Acad. Sci. U.S.A. 2004, 101, 17090]. Our simulations showed that the entrance of NH(4)(+) into the periplasmic recruitment vestibule requires only 3.1 kcal/mol of energy. This is consistent with the X-ray crystal structure, where one NH(4)(+) is captured in the binding vestibule. In this vestibule, NH(4)(+) loses one water of hydration, but the loss is compensated by a hydrogen bond, first with the backbone carbonyl oxygen of Phe161 then with the hydroxyl group of Ser219, as well as the stabilizing pi-cation interactions with the aromatic rings of Trp148 and Phe107 in the AmtB protein. In the end of this recruitment vestibule, the phenyl ring of Phe107 dynamically switches to an open state. This is correlated with a slight rotation and shifting of the indole ring of Trp148, which eventually creates a slot for the initially buried carboxylate group of Asp160 to become exposed to the bulk solvent. A hydrogen bond wire between NH(4)(+) and the carboxylate group of Asp160 via two water molecules was observed. Thus, Asp160 is most likely the proton acceptor from NH(4)(+). This explains the high conservation of Asp160 in Amt proteins and why the D160A mutant would completely quench the activity of AmtB [Javelle, A.; et al. J. Biol. Chem. 2004, 279, 8530; Marini, A. M.; et al. Curr. Genet. 2006, 49, 364]. Once NH(4)(+) deprotonates, the phenyl ring of Phe215 rotates to open, and the subsequent passage of NH(3) through the channel is straightforward.     

Mechanism of oxygen poisoning of ammonia synthesis catalyst

The effect of oxygen adsorbed on the surface of a commercial catalyst from a mixture of hydrogen with water vapor on the steady-state and nonsteady-state ammonia synthesis kinetics is studied under gradientless conditions at the pressures of the stoichiometric nitrogen-hydrogen mixture below the atmospheric pressure and at the temperatures of 285 and 240°C. The results obtained are discussed on the basis of the concepts of the ammonia synthesis theory of Temkin. The poisoning effect of oxygen on the reaction rate is explained by an increase in the activation energy of the rate constant k ₊ in the Temkin-Pyzhev equation, i.e., an increase in the activation energy of the rate constant of nitrogen adsorption at the fixed nitrogen adsorption heat. This conclusion agrees with the concepts of Ertl et al., according to which the activation energy of nitrogen adsorption on iron changes in symbasis with the variation of the electronic work function. Oxygen adsorption on the catalyst surface increases the electronic work function. Thus, the mechanism of the catalyst poisoning by oxygen (at its low surface coverage) consists in an increase in the electronic work function. Assumptions are stated as to the role of chemical promoters of iron catalysts.     

Towards the design of novel boron‐ and nitrogen‐substituted ammonia‐borane and bifunctional arene ruthenium catalysts for hydrogen storage

Electronic‐structure density functional theory calculations have been performed to construct the potential energy surface for H₂ release from ammonia‐borane, with a novel bifunctional cationic ruthenium catalyst based on the sterically bulky β‐diketiminato ligand (Schreiber et al., ACS Catal. 2012, 2, 2505). The focus is on identifying both a suitable substitution pattern for ammonia‐borane optimized for chemical hydrogen storage and allowing for low‐energy dehydrogenation. The interaction of ammonia‐borane, and related substituted ammonia‐boranes, with a bifunctional η⁶‐arene ruthenium catalyst and associated variants is investigated for dehydrogenation. Interestingly, in a number of cases, hydride‐proton transfer from the substituted ammonia‐borane to the catalyst undergoes a barrier‐less process in the gas phase, with rapid formation of hydrogenated catalyst in the gas phase. Amongst the catalysts considered, N,N‐difluoro ammonia‐borane and N‐phenyl ammonia‐borane systems resulted in negative activation energy barriers. However, these types of ammonia‐boranes are inherently thermodynamically unstable and undergo barrierless decay in the gas phase. Apart from N,N‐difluoro ammonia‐borane, the interaction between different types of catalyst and ammonia borane was modeled in the solvent phase, revealing free‐energy barriers slightly higher than those in the gas phase. Amongst the various potential candidate Ru‐complexes screened, few are found to differ in terms of efficiency for the dehydrogenation (rate‐limiting) step. To model dehydrogenation more accurately, a selection of explicit protic solvent molecules was considered, with the goal of lowering energy barriers for H‐H recombination. It was found that primary (1°), 2°, and 3° alcohols are the most suitable to enhance reaction rate. © 2014 Wiley Periodicals, Inc.     

取样量对润滑油中微量水分检测结果的影响

研究取样量对润滑油中微量水分测定结果的影响。基于卡尔·费休滴定法,在选定的测量条件下,用发生电极为有隔膜的自动库仑水分仪对基础油、有机热载体油、压缩机油、膨胀机油等新油和发动机油、汽轮机油、涡轮机油、压缩机油、齿轮油、液压油、导热油、船用油、电器绝缘油、风动工具油、金属加工油等在用油在0.1~2.0 g内各取9组不同质量的样品进行测定,得到了润滑油中微量水分准确测定所需的取样量。实验结果表明,新油取样量大于1.0 g,在用油取样量在1.0~1.5 g范围内,可以准确测定润滑油中微量水分含量。测定结果的相对标准偏差为0.83%~3.51%(n=10),样品加标回收率为95.0%~103.0%。在选择的取样量下,该方法具有良好的精密度、准确度,可连续测定多个样品,满足测定需求。     

Prebiotic routes to nucleosides: a quantum chemical insight into the energetics of the multistep reaction pathways

One of the most controversial questions of the RNA world theory is the formation of nucleosides through the reaction of nucleobases with ribose. The study presented herein discusses the thermodynamics of nucleoside formation under prebiotic conditions through the classical reaction route, which involves ribose and cytosine, as well as through the novel pathway suggested by Powner et al. [Nature 2009 , 459, 239–242]. Our computations show that, in contrast to the classical pathway, the route proposed by Powner et al. perfectly satisfies all conditions of a typical metabolic pathway that occurs in living organisms. In addition, we reveal the reasons that render the reaction of ribose with nucleobases endothermic and, thereby, less plausible under prebiotic conditions. We show that phosphates may play an indispensable role in the glycosylation of nucleobases by making this endothermic reaction step exothermic. In addition, we describe the catalytic role of phosphate anions in the formation of 2‐aminooxazole, which is one of the key steps of the synthetic route reported by Powner et al.     

Reinterpretation of the kinetic data and the non-steady state hypothesis (two-step mechanism) for the S(N)2 reaction between p-nitrophenoxide and methyl iodide in aprotic solvents containing water

Kinetic data obtained by conventional spectrophotometry for reaction of sodium p-nitrophenoxide with methyl iodide in degassed acetone are reported. The rate constants obtained from the first 10% of reaction do not differ significantly from those obtained over longer reaction times (e.g 50% reaction)--the main criteria of Parker et al. (Org. Biomol. Chem., 2003, 1, 36-38) for a non-steady state two-step mechanism. Reactions are accelerated by crown ether, suggesting a mechanism via a free ion pair. Product studies by high performance liquid chromatography of reactions in aqueous acetonitrile (used by Parker et al.) show that the yield of methylated product is strongly affected by at least two base-neutralising side reactions.     

Hydrogen transfer vs proton transfer in 7-hydroxy-quinoline.(NH3)3: a CASSCF/CASPT2 study

Multiconfigurational CASSCF and CASPT2 calculations were performed to investigate the enol --> keto tautomerization in the lowest singlet excited state of the 7-hydroxyquinoline.(NH3)3 cluster. Two different reaction mechanisms were explored. The first one corresponds to that proposed previously by Tanner et al. (Science 2003, 302, 1736) on the basis of experimental observations and CASSCF optimizations under Cs-symmetry constraints. This mechanism comprises four consecutive steps and involves nonadiabatic transitions between the valence 1pipi* state and a pisigma* Rydberg-type state, resulting in hydrogen-atom transfer. Single-point CASPT2 calculations corroborate that for Cs-symmetry pathways hydrogen-atom transfer is clearly preferred over proton transfer. The second mechanism, predicted by CASSCF optimizations without constraints, implies proton transfer along a pathway on the 1pipi* surface in which one or more ammonia molecules depart significantly from the molecular plane defined by the hydroxyquinoline ring. The results suggest that both mechanisms may be competitive with proton transfer being somewhat favorable over hydrogen-atom transfer.     

Electronic properties of liquid ammonia: a sequential molecular dynamics/quantum mechanics approach

The electronic properties of liquid ammonia are investigated by a sequential molecular dynamics/quantum mechanics approach. Quantum mechanics calculations for the liquid phase are based on a reparametrized hybrid exchange-correlation functional that reproduces the electronic properties of ammonia clusters [(NH3)n; n=1-5]. For these small clusters, electron binding energies based on Green's function or electron propagator theory, coupled cluster with single, double, and perturbative triple excitations, and density functional theory (DFT) are compared. Reparametrized DFT results for the dipole moment, electron binding energies, and electronic density of states of liquid ammonia are reported. The calculated average dipole moment of liquid ammonia (2.05+/-0.09 D) corresponds to an increase of 27% compared to the gas phase value and it is 0.23 D above a prediction based on a polarizable model of liquid ammonia [Deng et al., J. Chem. Phys. 100, 7590 (1994)]. Our estimate for the ionization potential of liquid ammonia is 9.74+/-0.73 eV, which is approximately 1.0 eV below the gas phase value for the isolated molecule. The theoretical vertical electron affinity of liquid ammonia is predicted as 0.16+/-0.22 eV, in good agreement with the experimental result for the location of the bottom of the conduction band (-V 0=0.2 eV). Vertical ionization potentials and electron affinities correlate with the total dipole moment of ammonia aggregates.     

Lock-exchange experiments with an autocatalytic reaction front

A viscous lock-exchange gravity current corresponds to the reciprocal exchange of two fluids of different densities in a horizontal channel. The resulting front between the two fluids spreads as the square root of time, with a diffusion coefficient reflecting the buoyancy, viscosity, and geometrical configuration of the current. On the other hand, an autocatalytic reaction front between a reactant and a product may propagate as a solitary wave, namely, at a constant velocity and with a stationary concentration profile, resulting from the balance between molecular diffusion and chemical reaction. In most systems, the fluid left behind the front has a different density leading to a lock-exchange configuration. We revisit, with a chemical reaction, the classical situation of lock-exchange. We present an experimental analysis of buoyancy effects on the shape and the velocity of the iodate arsenous acid autocatalytic reaction fronts, propagating in horizontal rectangular channels and for a wide range of aspect ratios (1/3 to 20) and cylindrical tubes. We do observe stationary-shaped fronts, spanning the height of the cell and propagating along the cell axis. Our data support the contention that the front velocity and its extension are linked to each other and that their variations scale with a single variable involving the diffusion coefficient of the lock-exchange in the absence of chemical reaction. This analysis is supported by results obtained with lattice Bathnagar-Gross-Krook (BGK) simulations Jarrige et al. [Phys. Rev. E 81, 06631 (2010)], in other geometries (like in 2D simulations by Rongy et al. [J. Chem. Phys. 127, 114710 (2007)] and experiments in cylindrical tubes by Pojman et al. [J. Phys. Chem. 95, 1299 (1991)]), and for another chemical reaction Schuszter et al. [Phys. Rev. E 79, 016216 (2009)].     

Miniaturization of solid-phase reactors for on-line post-column derivatization in narrow-bore liquid chromatography

Summary The use of solid-phase reactors for post-column derivatization in narrow-bore HPLC (1.0mm i.d. analytical columns) is evaluated. Two systems are described, viz. for the determination of N-methylcarbamate pesticides and for that of urea and ammonia. The solid-phase reactor is packed with a strong anion exchange resin and urease immobilized on silica, respectively, to effect the catalytic hydrolysis of the solutes eluting from the analytical column. In both systems, the hydrolysis product is reacted with o-phthalaldehyde followed by fluorescence monitoring. Analytical data are presented and band broadening from various parts of the reaction detector system is discussed. An on-line trace enrichment procedure via a micro precolumn is descried for the trace level determination of N-methylcaramates in surface water samples.     

On the condensation of salicylaldehyde with hydrazine

A simple procedure for preparing uncontaminated salicylaldehyde hydrazone is outlined. The condensation reaction of salicylaldehyde and hydrazine in 2:1 molar ratio usually gives initially a mixture of the three geometrical isomers of salicylaldazine: one isomer is bright yellow, another is cream, the third is light pink. The earlier reports of Feigl and of Terentev et al. on the use of salicylaldehyde in the detection of hydrazine have been found to be misleading and the later report of Jain et al. incomplete. A detailed account is now given and improved salicylaldehyde tests for hydrazine are recommended. The structure given by Jain et al. for the copper(II) complex of salicylaldehyde hydrazone is confirmed by means of infrared spectroscopy and microanalysis. Preliminary studies on the copper(II) complex of salicylaldazine are reported.     

One-dimensional quantum description of the bending vibrations of HCN/CNH for high values of the total angular momentum

For high values of the quantum number of the total angular momentum J (up to J = 20), quantum mechanical eigenstates (eigenvalues and eigenfunctions) are calculated by the method of Gatti et al. (J. Mol. Spectrosc. 181 (1997) 403) for the bending deformations of HCN and CNH. In particular, we have examined the l-type resonances in highly excited rovibrational states within the framework of a one-dimensional model, i.e. along the reaction pathway for the isomerization reaction HCN/CNH. The potential energy surface used is that of Bowman et al. (J. Chem. Phys. 99 (1993) 308).     

巯基葡聚糖凝胶分离富集动力学光度法测定微量铅

研究了动力学分光光度法测定痕量 Pb2 +的新方法。该方法的检出限为1 37× 1 0 -10 g/m L,线性范围为 0～ 2 .0μg/2 5m L,采用巯基葡光度聚糖凝胶分离干扰离子 ,提高了方法的选择性 ,可用于 Pb2 +样品的测定。