Sterilizable gels from thermoresponsive block copolymer worms

Biocompatible hydrogels have many applications, ranging from contact lenses to tissue engineering scaffolds. In most cases, rigorous sterilization is essential. Herein we show that a biocompatible diblock copolymer forms wormlike micelles via polymerization-induced self-assembly in aqueous solution. At a copolymer concentration of 10.0 w/w %, interworm entanglements lead to the formation of a free-standing physical hydrogel at 21 °C. Gel dissolution occurs on cooling to 4 °C due to an unusual worm-to-sphere order-order transition, as confirmed by rheology, electron microscopy, variable temperature (1)H NMR spectroscopy, and scattering studies. Moreover, this thermo-reversible behavior allows the facile preparation of sterile gels, since ultrafiltration of the diblock copolymer nanoparticles in their low-viscosity spherical form at 4 °C efficiently removes micrometer-sized bacteria; regelation occurs at 21 °C as the copolymer chains regain their wormlike morphology. Biocompatibility tests indicate good cell viabilities for these worm gels, which suggest potential biomedical applications.     

Mechanically driven reorganization of thermoresponsive diblock copolymer assemblies in water

Controlled formation of a variety of 3D structures was observed at high polymer weight fractions in water from a single diblock, consisting of poly(N-isopropylacrylamide), PNIPAM, and polystyrene, PSTY segments. The structures form through a mechanical process driven by swelling of hydrophilic polymer segments upon a change in temperature (see picture, SDS=sodium dodecylsulfate).     

Anomalous transition in aqueous solutions of a thermoresponsive amphiphilic diblock copolymer

The influence of shear flow on aggregation and disaggregation in aqueous solutions of the thermoresponsive methoxy-poly(ethylene glycol)-block-poly(N-isopropylacrylamide) (MPEG53-b-PNIPAAM113) copolymer that exhibits a lower critical solution temperature was investigated with the aid of turbidity, shear viscosity, and rheo small angle light scattering (rheo-SALS) methods. The turbidity results at quiescent conditions revealed a novel transition peak in the turbidity curve at intermediate temperatures, which reflects the delicate interplay between temperature-induced aggregation and shrinking of the species. A similar anomalous transition peak (located at the same temperature) was observed in the steady shear viscosity measurements at intermediate temperatures, and the amplitude of the peak was reduced with increasing shear rate as a consequence of breakup of interaggregate chains. At low temperatures (low sticking probability), enhanced shear rate generated interpolymer aggregates; whereas in the high-temperature domain (high sticking probability) association structures were broken up as the shear rate was increased. The rheo-SALS experiments disclosed growth of aggregates at low temperatures and destruction of association complexes at high temperatures. An increase of the cloud point temperature with rising shear rate is reported, which is interpreted as being a disruption of clusters under the influence of shear stresses.     

Preparation and characterization of thermoresponsive isopropylacrylamide–hydroxyethylmethacrylate copolymer gels

A random copolymer of N-isopropylacrylamide and 2-hydroxyethylmeth-acrylate, poly(NIPAM-co-HEMA), having thermoresponsive character was prepared bya redox copolymerization method. Poly(ethylene glycol), PEG 4000 was included in the copolymerization recipe to increase the thermoresponsivity of copolymeric structure. Poly(NIPAM-co-HEMA) copolymer gels having more elastic character and higher mechanical strength relative to poly(NIPAM) gel could be achieved by the proposed copolymerization procedure. The equilibrium and dynamic response against the temperature were investigated for the gel matrices produced by changing the initial NIPAM/HEMA mol ratio and PEG 4000 concentration in the copolymerization mixture. The effective diffusion coefficient of water within the gel matrix was estimated for either swollen or shrunken states by applying an unsteady-state diffusion model on the dynamic swelling and shrinking behaviors of gel matrix prepared in the cylindrical form. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 527–541, 1998     

Visualizing worm micelle dynamics and phase transitions of a charged diblock copolymer in water

Assemblies of block copolymer amphiphiles are sometimes viewed as glassy, frozen, or static colloids, especially in strongly segregating solutions. Here, we visualize by fluorescence microscopy and AFM the dynamics and transitions of single cylindrical micelles and vesicles composed of a charged diblock copolymer in water. In mapping the salt- and pH-dependent phase diagrams of a near-symmetric diblock of poly(acrylic acid)-polybutadiene, low pH and high salt (NaCl, CaCl2) neutralize and screen the charged corona sufficiently to foster membrane formation and generate vesicles. Decreased salt and neutral pH increases intra-coronal repulsion and drives a transition to multi-branched cylinders and highly stable, but fluid and flexible, worm micelles. Ca2+ both stiffens cylinders and stabilizes them relative to spheres. Further increase of intra-coronal repulsion generates spherical micelles by fragmentation and pinch-off at the ends of worms. Both the transition kinetics and phase diagrams indicate divalent cation is about 5-10-fold more effective than monovalent in stabilizing all nonspherical morphologies.     

Reactive thermoresponsive copolymer scaffolds

Thermoresponsive copolymer scaffolds containing reactive aldehyde functions were prepared and a selection of organic residues conjugated to these copolymer scaffolds through oxime/hydrazone formation. The conjugation of hydrophobic residues affords copolymers whose lower solution critical temperatures are in most cases higher than that of the parent copolymer scaffold.     

Tuning the properties of hydrogen-bonded block copolymer worm gels prepared via polymerization-induced self-assembly

Polymerization-induced self-assembly (PISA) is exploited to design hydrogen-bonded poly(stearyl methacrylate)-poly(benzyl methacrylate) [PSMA-PBzMA] worm gels in n-dodecane. Using a carboxylic acid-based RAFT agent facilitates hydrogen bonding between neighboring worms to produce much stronger physical gels than those prepared using the analogous methyl ester-based RAFT agent. Moreover, tuning the proportion of these two types of end-groups on the PSMA chains enables the storage modulus (G′) of a 20% w/w worm gel to be tuned from ∼4.5 kPa up to ∼114 kPa. This is achieved via two complementary routes: (i) an in situ approach using binary mixtures of acid- and ester-capped PSMA stabilizer chains during PISA or (ii) a post-polymerization processing strategy using a thermally-induced worm-to-sphere transition to mix acid- and ester-functionalized spheres at 110 °C that fuse to form worms on cooling to 20 °C. SAXS and rheology studies of these hydrogen-bonded worm gels provide detailed insights into their inter-worm interactions and physical behavior, respectively. In the case of the carboxylic acid-functionalized worms, SAXS provides direct evidence for additional inter-worm interactions, while rheological studies confirm both a significant reduction in critical gelation concentration (from approximately 10% w/w to 2–3% w/w) and a substantial increase in critical gelation temperature (from 41 °C to 92 °C). It is remarkable that a rather subtle change in the chemical structure results in such improvements in gel strength, gelation efficiency and gel cohesion.

Carboxylic acid-capped diblock copolymer worms are prepared in n-dodecane via polymerization-induced self-assembly. Varying the proportion of terminal carboxylic acid groups modulates the inter-worm H-bonding interactions and hence the gel modulus.     

Aqueous reversible addition‐fragmentation chain transfer dispersion polymerization of thermoresponsive diblock copolymer assemblies: Temperature directed morphology transformations

In this work, we demonstrate the formation of various 3D structures formed by a structural reorganization; a process not governed by self‐assembly. First, we packaged well‐defined diblocks, thermoresponsive poly(N‐isopropylacrylamide‐b‐styrene) or P(NIPAM‐b‐STY), into spherical particles made in situ using a reversible addition‐fragmentation chain transfer (RAFT) nanoreactor technique in water to obtain high polymer solids. The resultant spheres reorganized through a temperature stimulus to form equilibrium and kinetically trapped structures; we denote this process as temperature directed morphology transformation (TDMT). Cylinder and vesicle structures, other more unusual loop, buckled sphere and cauliflower (via ultrasound) structures were observed below the lower critical solution temperature (LCST) of PNIPAM. These structures were produced efficiently, rapidly, reproducibly at high polymer solids and can be stored for years in solution or be freeze‐dried and rehydrated without a change in structure, which becomes important in biological applications. We generated the first phase diagram for the TDMT changes of thermoresponsive diblock micelles in concentrated solutions (> 7% polymer solids) produced from narrow molecular weight diblock copolymers (PDI ～ 1.1). The sphere/cylinder and cylinder/vesicle transition in the phase diagram were surprisingly found to be predominantly dictated by the length of the hydrophilic block, poly(N‐isopropylacrylamide). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and nanostructure of strong polyelectrolyte brushes in amphiphilic diblock copolymer monolayers on a water surface

We synthesized an ionic amphiphilic diblock copolymer, poly(hydrogenated isoprene)-b-poly(styrenesulfonic acid) (PIp-h2-b-PSS), by living anionic polymerization, and the nanostructure of its monolayer spread on a water surface was directly investigated by the in situ X-ray reflectivity technique. The monolayer of the diblock copolymer on a water surface had a smooth hydrophobic PIp-h2 layer on water and a "carpet"/polymer brush double layer in a hydrophilic sodium polystyrene sulfonate (PSSNa) layer under the water. The surface pressure dependence and PSSNa chain length dependence of the PIp-h2 layer thickness and the brush nanostructure were quantitatively studied. The effect of salt concentration in the subphase was also investigated in aqueous solutions containing 0-2 M NaCl. The salt effect on monolayer structure occurred at around 0.2 M. The thickness of the PSS brush layer decreased at salt concentrations above 0.2 M, while no structural change was observed below 0.2 M. This critical salt concentration is thought to be related to the balance of ionic concentrations inside the brush and in bulk solution.     

Stimuli-response of charged diblock copolymer brushes

Following our previous work on the solvent-response of uncharged diblock copolymer brushes (D. Meng and Q. Wang, J. Chem. Phys. 130, 134904 (2009)), we have performed continuum self-consistent field calculations to study the response (i.e., changes of brush height and surface-layer composition) of diblock brushes with only one block charged to various external stimuli, including solvent selectivity, solution pH, ionic strength, and applied electric field. Our study revealed complex interplay among various stimuli, which needs to be well understood in order to design smart surfaces from charged diblock brushes.     

Dynamic heterogeneity in diblock copolymer systems

Dynamic light scattering from diblock copolymers in melt and solution in a non-selective solvent reveals different mechanisms for relaxing the composition and orientation fluctuations near the order to disorder transition (ODT). For the former, internal relaxation and copolymer chain diffusion are the main relaxation processes whereas the latter relate to collective orientation of the copolymer chains near the ODT and induced form anisotropy of coherently ordered microstructures below ODT.     

Facile preparation of core‐crosslinked micelles from azide‐containing thermoresponsive double hydrophilic diblock copolymer via click chemistry

Double hydrophilic diblock copolymer, poly(N,N‐dimethylacrylamide)‐b‐poly(N‐isopropylacrylamide‐co‐3‐azidopropylacrylamide) (PDMA‐b‐P(NIPAM‐co‐AzPAM), containing azide moieties in one of the blocks was synthesized via consecutive reversible addition‐fragmentation chain transfer polymerization. The obtained diblock copolymer molecularly dissolves in aqueous solution at room temperature, and can further supramolecularly self‐assemble into core‐shell nanoparticles consisting of thermoresponsive P(NIPAM‐co‐AzPAM) cores and water‐soluble PDMA coronas above the lower critical solution temperature of P(NIPAM‐co‐AzPAM) block. As the micelle cores contain reactive azide residues, core crosslinking can be facilely achieved upon addition of difunctional propargyl ether via click chemistry. In an alternate approach in which the PDMA‐b‐P(NIPAM‐co‐AzPAM) diblock copolymer was dissolved in a common organic solvent (DMF), the core‐crosslinked (CCL) micelles can be fabricated via “click” crosslinking upon addition of propargyl ether and subsequent dialysis against water. CCL micelles prepared by the latter approach typically possess larger sizes and broader size distributions, compared with that obtained by the former one. In both cases, the obtained (CCL) micelles possess thermoresponsive cores, and the swelling/shrinking of which can be finely tuned with temperature, rendering them as excellent candidates as intelligent drug nanocarriers. Because of the high efficiency and quite mild conditions of click reactions, we expect that this strategy can be generalized for the structural fixation of other self‐assembled nanostructures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 860–871, 2008     

Synthesis and self-assembly behavior of thermoresponsive triblock copolymer

Block copolymers comprising thermosensitive poly(N-isopropylacrylamide) (PNIPAM) and hydrophobic poly(n-butyl acrylate) (PBA) blocks, were synthesized using the reversible addition-fragmentation chain transfer polymerization (RAFT), their thermosensitive behavior was studied by ultraviolet spectrophotometer (UV) and dynamic light scattering (DLS). The lower critical solution temperature (LCST) was strongly correlated to the hydrophobic/hydrophilic ratio of the copolymers. Their micellization and self-assembly behavior in dilute aqueous solution were studied by surface tension (SFT), DLS and TEM. The resulting block copolymers reversibly formed or deformed micellar assemblies during their LCSTs. The critical micelle concentration (CMC) was controlled by the composition of PBA and PNIPAM, indicating the successful formation of the block copolymers.     

Preparation and solution behavior of a thermoresponsive diblock copolymer of poly(ethyl glycidyl ether) and poly(ethylene oxide)

A thermoresponsive diblock copolymer, poly(ethyl glycidyl ether)-block-poly(ethylene oxide) (PEGE-b-PEO), is synthesized by successive anionic ring-opening polymerization of ethyl glycidyl ether and ethylene oxide using 2-phenoxyethanol as a starting material, and its solution behavior is elucidated in water. In a dilute 1 wt % solution, the temperature-dependent alteration in the polymer hydrodynamic radius (RH) is measured in the temperature range between 5 and 45 degrees C by pulse-gradient spin-echo NMR and dynamic light scattering. The RH value increased with temperature in two steps, where the first step at 15 degrees C corresponds to the core-shell micelle formation and the second step at 40 degrees C corresponds to the aggregation of the core-shell micelles. The formation of the core-shell micelles is supported by the solubilization of a dye (1,6-diphenyl-1,3,5-hexatriene) in the hydrophobic core, which is recognized for a copolymer solution in the temperature range between 20 and 40 degrees C. In this temperature range, the core-shell micelles and the unimers coexist and the fraction of the former gradually increases with increasing temperature, suggesting equilibrium between the micelles and the unimers. In the concentrated regime (40 wt % solution), the solution forms a gel and the small-angle X-ray scattering measurements reveal the successive formation of hexagonal and lamellar liquid crystal phases with increasing temperature.     

Controlled one-step synthesis of a diblock copolymer

Well-defined block copolymers were obtained from 4-hydroxy-butyl-2-bromoisobutyrate dual initiator, combining tert-butylmethacrylate ATRP and ε-caprolactone ROP in a one-step process. Using AlEt₃ as coinitiator in a ROP catalytic process, the variation of the AlEt₃/initiator ratio permits to modulate the ROP rate and so to control the final block copolymer composition. Nevertheless, slight interferences between the two polymerizations were observed.     

Synthesis and micellization of thermoresponsive galactose‐based diblock copolymers

Thermoresponsive double hydrophilic diblock copolymers poly(2‐(2′‐methoxyethoxy)ethyl methacrylate‐co‐oligo(ethylene glycol) methacrylate)‐b‐poly(6‐O‐methacryloyl‐D ‐galactopyranose) (P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP) with various compositions and molecular weights were obtained by deprotection of amphiphilic diblock copolymers P(MEO₂MA‐co‐OEGMA)‐b‐poly(6‐O‐methacryloyl‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose) (P(MEO₂MA‐co‐OEGMA)‐b‐PMAlpGP), which were prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization using P(MEO₂MA‐co‐OEGMA) as macro‐RAFT agent. Dynamic light scattering and UV–vis studies showed that the micelles self‐assembled from P(MEO₂MA‐co‐OEGMA)‐b‐PMAlpGP were thermoresponsive. A hydrophobic dye Nile Red could be encapsulated by block copolymers P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP upon micellization and released upon dissociation of the formed micelles under different temperatures. The galactose functional groups in the PMAGP block have specific interaction with HepG2 cells, and P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP has potential applications in hepatoma‐targeting drug delivery and biodetection. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Chiral imprinting of diblock copolymer single-chain particles

This Article reports the molecular imprinting of polymer single-chain particles that have a radius ～3.7 nm. For this, the template L-phenylalanine anilide or L-ΦAA and a diblock copolymer PtBA-b-P(CEMA-r-CA) were used. Here, PtBA denotes poly(tert-butyl acrylate), and P(CEMA-r-CA) denotes a random block consisting of cinnamoyloxyethyl methacrylate (CEMA) and carboxyl-bearing (CA) units. In CHCl(3)/cyclohexane (CHX) with 64 vol % of CHX or at f(CHX) = 64%, a block-selective solvent for PtBA, PtBA-b-P(CEMA-r-CA) formed spherical micelles. The core consisted of the insoluble P(CEMA-r-CA) block and L-ΦAA, which complexed with the CA groups. Pumping slowly this micellar solution into stirred CHCl(3)/(CHX) at f(CHX) = 64% triggered micelle dissociation into single-chain micelles, which comprised presumably a solubilized PtBA tail and a collapsed P(CEMA-r-CA)/L-ΦAA head. Because the solvent reservoir was under constant UV irradiation, the photo-cross-linkable units in the P(CEMA-r-CA) head cross-linked, and the single-chain micelles were converted into cross-linked single-chain micelles or tadpoles. Synchronizing the micelle addition and photoreaction rates allowed the preparation, from this protocol, of essentially pure tadpoles at high final polymer concentrations. Imprinted tadpoles were procured after L-ΦAA was extracted from the tadpole heads. Under optimized conditions, the produced imprinted tadpoles had exceptionally high binding capacity and high selectivity for L-ΦAA. In addition, the rates of L-ΦAA release from and rebinding by the particles were high.     

Comparative analysis of nanostructured diblock copolymer films

Nanostructured polymer films of poly(styrene-block-paramethylstyrene) diblock copolymers P(Sd-b-pMS) on silicon substrates with a native oxide layer are investigated. Resulting from a storage under toluene vapor, a surface structure is installed. The early stages, characterized by the creation of a host structure out of an initially continuous film, are addressed. Grazing incidence small-angle X-ray scattering (GISAXS) experiments were performed as a function of exposure time. Results are compared to modelling of the scattering pattern and other experimental techniques, such as grazing incidence small-angle neutron scattering (GISANS) and atomic force microscopy (AFM) data. Possibilities and limits of the techniques are discussed.     

Salt effect on the nanostructure of strong polyelectrolyte brushes in amphiphilic diblock copolymer monolayers on the water surface

The nanostructure of a spread monolayer of diblock copolymers of poly(hydrogenated isoprene) and poly(styrenesulfonate) at the air/water interface were studied by in situ X-ray reflectivity as a function of the brush density and salt concentration. When the monolayer was compressed beyond the "critical brush density", its nanostructure changed from a flat, adsorbed "carpet" layer to a "carpet + brush" structure. The critical brush density was found to be about 0.12 nm-2, independent the brush length and salt concentration under a low-salt condition. The brush formation behavior was considered to be controlled by an electrostatic interaction between polyelectrolyte chains rather than by a steric hindrance. This might be because the distance between the chains at the critical point is rather long and also because of the effect of the salt on the critical brush density. The critical brush density increased at higher added salt concentration beyond 1 M. As a result, we found a new structure transition behavior of the polymer brushes between carpet-only and carpet + brush structures, which was induced by salt addition. Finally, we succeeded in the controlled release of salt ions from the salted brush layer by changing the brush density by compression of the monolayer.     

温敏性丙烯腈共聚物纳米纤维膜的制备与性能

采用可逆加成断裂链转移可控/活性聚合方法合成了丙烯腈与N-异丙基丙烯酰胺(NIPAM)的嵌段共聚物,通过调控嵌段聚合反应时间可以获得一系列不同嵌段链长的共聚物,分子量分布在1.3左右.运用静电纺丝技术制备了所合成嵌段共聚物的纳米纤维膜,扫描电镜照片表明纳米纤维膜较为均匀且直径可调.研究了纳米纤维膜表面水接触角与荧光标记牛血清清蛋白的吸附现象,接触角结果证实共聚物纳米纤维膜具有一定的温度响应性,且疏水性嵌段的引入导致响应温度较PNIPAM有所降低;蛋白质吸附结果则表明温度较低时纳米纤维膜表面更亲水,蛋白质吸附较少.所制备的温敏性纳米纤维膜可望用作智能分离与吸附材料.