Accurate mass measurement using Fourier transform ion cyclotron resonance mass spectrometry for structure elucidation of designer drug analogs of tadalafil, vardenafil and sildenafil in herbal and pharmaceutical matrices

Phosphodiesterase type 5 (PDE-5) inhibitors are a class of drugs used primarily in the treatment of erectile dysfunction. The Food and Drug Administration (FDA) approved PDE-5 inhibitors include sildenafil citrate, vardenafil hydrochloride and tadalafil. In this study, accurate mass measurements were made by electrospray ionization (ESI) using Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS) to elucidate the structures of sildenafil, tadalafil and vardenafil analogs that were found in products marketed as dietary supplements. Initial detection of these analogs was accomplished through routine screening of suspect samples by liquid chromatography/electrospray ionization multi-stage mass spectrometry (LC/ESI-MS(n)) on a low-resolution ion trap instrument. The chromatographic behavior and mass spectrometric fragmentation patterns observed were often similar to those observed for FDA approved PDE-5 inhibitors. The mass accuracy and resolving power associated with FTICRMS allows for the determination of elemental compositions. Elucidation of the product ion structures for the analogs was accomplished through the use of accurate mass measurements with the aid of Mass Frontier software (version 4.0). Using FTICRMS, accurate masses with measurement errors averaging <0.4 ppm were achieved, allowing assignment of one possible elemental formula to each fragment ion. The mass measurement errors associated with [M + H](+) for the analogs aminotadalafil, piperidino vardenafil, hydroxyacetildenafil and piperidino acetildenafil were 0.1, 0.0, 0.1 and 0.5 ppm, respectively. Based on the accuracy of the measurements, structural assignments could be made with a high degree of confidence.     

Quantitative Fourier transform ion cyclotron resonance mass spectrometry--the determination of creatinine by isotope dilution mass spectrometry

Accurate quantitation has been demonstrated on many different types of mass spectrometer. However, quantitative applications of Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS) have been limited. In this study, the quantitative potential of FTICRMS has been investigated using an exact matching isotope dilution method for the determination of creatinine in serum. Creatinine is an important clinical biomarker and its measurement is used as an assessment of renal function. The quantitation of creatinine was selected because a high-accuracy high-performance liquid chromatography/mass spectrometry (HPLC/MS) determination using a triple quadrupole mass spectrometer has already been successfully developed in-house. Therefore, a direct comparison of the quantitative capability of FTICRMS could be made against an established method. The accuracy of the quantitation of creatinine was found to be equivalent to that obtained using LC/MS. However, the expanded measurement uncertainty (k = 2) was larger, at 6%, when using FTICRMS compared with 1% when using HPLC/MS with the triple quadrupole mass spectrometer.     

Electron transfer dissociation in the hexapole collision cell of a hybrid quadrupole-hexapole Fourier transform ion cyclotron resonance mass spectrometer

Electron transfer dissociation (ETD) of proteins is demonstrated in a hybrid quadrupole-hexapole Fourier transform ion cyclotron resonance mass spectrometer (Qh-FTICRMS). Analyte ions are selected in the mass analyzing quadrupole, accumulated in the hexapole linear ion trap, reacted with fluoranthene reagent anions, and then analyzed via an FTICR mass analyzer. The hexapole trap allows for a broad fragment ion mass range and a high ion storage capacity. Using a 3 T FTICRMS, resolutions of 60 000 were achieved with mass accuracies averaging below 1.4 ppm. The high resolution, high mass accuracy ETD spectra provided by FTICR obviates the need for proton transfer reaction (PTR) charge state reduction of ETD product ions when analyzing proteins or large peptides. This is demonstrated with the ETD of ubiquitin and apomyoglobin yielding sequence coverages of 37 and 20%, respectively. We believe this represents the first reported successful combination of ETD and a FTICRMS.     

A high voltage RF oscillator for driving multipole ion guides

A high voltage RF oscillator circuit has been designed and constructed for driving multipole ion guides. The circuit is tunable from 500 kHz to 1.5 MHz by changing a capacitor and provides 0–1000 V_p-p that is controlled by a 0–10 V input using a negative feedback circuit. This inexpensive circuit uses a set of high voltage transistors oscillating in tandem and does not require tuning of the resonance drive frequency as the oscillator automatically resonates at the (LC)^−1/2 frequency. Matrix-assisted laser desorption/ionization-Fourier transform mass spectrometry (MALDI-FTMS) mass spectra were acquired using this tunable RF oscillator circuit to allow transmission of protein ions in the 8.5–39 kDa range through the quadrupole ion guide from the ion source to the mass analyzer.     

Characterization of complex assemblages of organic acids in geological samples by negative electrospray ionization mass spectrometry using a double‐focusing magnetic sector field mass spectrometer

Four different geological sample types (a crude oil, a crude oil asphaltene, a reservoir core extract and a reservoir core asphaltene) have been characterized by negative ionization electrospray mass spectrometry at low and high mass resolution using a double‐focusing magnetic sector field mass spectrometer. The mass range, shape of the spectra and the signal distribution of the acidic constituents as well as the average molecular weights, the total ion abundance and signal intensity in the spectra were compared for the different sample types. Nominal mass classes have been evaluated and Kendrick mass plots were generated in order to identify homologous series. For the crude oil sample, accurate mass assignments were made by high‐resolution double‐focusing magnetic sector field mass spectrometry (DFMSFMS) and were compared with those obtained by negative ion electrospray ionization (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS). With both instrument types, compounds with the molecular composition C_nH_2n+zO₂, among which carboxylic acids predominated, were the main acidic compound class detectable in negative ESI mass spectra. Good agreement was achieved for the double bond class distribution and the carbon number distribution of the O₂ class. In addition, minor compound classes could be identified using FTICRMS. Copyright © 2010 John Wiley & Sons, Ltd.     

The detection of nicotine in a Late Mayan period flask by gas chromatography and liquid chromatography mass spectrometry methods

Several ancient Mayan vessels from the Kislak Collection of the US Library of Congress were examined for the presence of alkaloids. One of them, a codex‐style flask, bears a text that appears to read yo‐'OTOT‐ti 'u‐MAY, spelling y‐otoot 'u‐may 'the home of its/his/her tobacco'. Samples extracted from this Late Classic period (600 to 900 AD) container were analyzed by gas chromatography/mass spectrometry (GC/MS) and liquid chromatography/mass spectrometry (LC/MS) methods. Nicotine was identified as the major component of the extracts. LC/MS analyses also yielded signals due to nicotine mono‐oxides. The identities of the compounds were determined by comparison of the chromatographic and/or mass spectral characteristics with those from standards and literature data. High‐resolution high mass accuracy tandem mass spectrometry (MS/MS) spectra of protonated nicotine and nicotine mono‐oxides were measured to verify and to correct previous product ion assignments. These analyses provided positive evidence for nicotine from a Mayan vessel, indicating it as a likely holder of tobacco leafs. The result of this investigation is the first physical evidence of tobacco from a Mayan container, and only the second example where the vessel content recorded in a Mayan hieroglyphic text has been confirmed directly by chromatography/mass spectrometry trace analysis. Copyright © 2012 John Wiley & Sons, Ltd.     

Laser-induced Fourier transform ion cyclotron resonance mass spectrometry of organic and inorganic compounds: methodologies and applications

The combination of a laser with a Fourier transform ion cyclotron resonance mass spectrometer (FTICRMS) enables a variety of MS experiments to be conducted. The laser can be used either as an intense photonic source for the photoionization of neutral species introduced in a variety of ways into the FTICR cell, or it can be made to directly interact with a solid, generating gas-phase ions. Depending on the experimental conditions used, various laser-matter interactions can occur. When high laser energy (also referred to as power density or irradiance) is used, laser ablation (LA) processes lead to the release of species into the gas phase, a significant fraction of which are ionic. The number of ions decreases with the irradiance. For low irradiance values, the so-called laser desorption (LD) regime applies, where the expelled species are mainly neutrals. LA–FTICRMS and LD–FTICRMS can be used to study a wide range of materials, including mineral, organic, hybrid and biological compounds (although matrix-assisted laser desorption ionization, MALDI, which is not reviewed in this paper, is more commonly applied to biological compounds). This paper will review a selection of methodological developments and applications in the field of laser ionization FTICRMS, LD–FTICRMS, and LA–FTICRMS for the analysis of organics and inorganics in complex mixtures, emphasizing insoluble materials. Specifically, silicate- and carbon-based complex materials as well as organic compounds will be examined due to their relevance to natural environmental and anthropogenic matrices.     

High-resolution analysis by nano-electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry for the identification of molecular species of phospholipids and their oxidized metabolites

Nano-electrospray ionization (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS) was applied to identify the molecular species of phosphatidylethanolamine of Caenorhabditis elegans, which has a high concentration of phospholipids with a fatty acyl chain having an odd number of carbon atoms. The molecular species of diacyl phosphatidylethanolamine with one fatty acyl chain having an odd number of carbon atoms and one fatty acyl chain having an even number of carbon atoms was identified separately from alkyl-acyl phosphatidylethanolamine with an alkyl chain having an even number of carbon atoms and a fatty acyl chain having an even number of carbon atoms. Furthermore, nano-ESI-FTICRMS was applied to the direct identification of oxidized phosphatidylcholine from soybean. The mass peaks of individual molecular species of oxidative phosphatidylcholine, such as 34:3 diacyl phosphatidylcholine with peroxide (+2O) (m/z 788.544) or 34:2 diacyl phosphatidylcholine with peroxide (+2O) (m/z 790.560), can be separated from the peaks of the molecular species of the non-oxidative phospholipids. This suggests that the mass peaks with a difference of less than 0.1 mass units in their molecular weight can be separated and that their individual exact molecular compositions can be obtained by the FTICRMS analysis. The high resolution and high accuracy of FTICRMS are very effective in the analysis of molecular species of phospholipids and their derivatives.     

Study of active naphtodianthrone St John's Wort compounds by electrospray ionization Fourier transform ion cyclotron resonance and multi‐stage mass spectrometry in sustained off‐resonance irradiation collision‐induced dissociation and infrared multiphoton dissociation modes

Five well‐known active naphtodianthrone constituents of Hypericum perforatum (St John's Wort) extracts have been investigated by electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI‐FTICRMS) and ESI‐FTICRMSⁿ. The studied compounds were hypericin, pseudohypericin, protohypericin, protopseudohypericin (biosynthetic precursors of the two former compounds, respectively) and isopseudohypericin (alkaline degradation product of pseudohypericin). Dissociation mass spectrometry measurements performed on the [M–H]^? ion presented a variable efficiency as a function of the used activation mode. Sustained off‐resonance irradiation collision‐induced dissociation (SORI–CID) only led to a restricted number of fragment ions. In contrast, IRMPD ensured the detection of numerous product ions. Ions detected in ESI‐FTICRMS and ESI‐FTICRMSⁿ experiments were measured with a very high mass accuracy (typically mass error is lower than 0.5 mDa at m/z close to 500) that allowed unambiguous formulae to be assigned to each signal observed in a mass spectrum. In spite of similar structures, specific fragmentation patterns were observed for the different compounds investigated. This study may be useful in the future to characterize in natural extracts these compounds (or derivatives of these compounds) by liquid chromatography/tandem mass spectrometry (LC/MS/MS) experiments by considering the MS/MS transitions highlighted in this paper. Copyright © 2009 John Wiley & Sons, Ltd.     

Glycerophospholipid profiling by high‐performance liquid chromatography/mass spectrometry using exact mass measurements and multi‐stage mass spectrometric fragmentation experiments in parallel

A profiling method for glycerophospholipids (GPs) in biological samples was developed using reversed‐phase high‐performance liquid chromatography (RP‐HPLC) coupled to hybrid linear ion trap‐Fourier transform ion cyclotron resonance mass spectrometry (LIT‐FTICRMS) with electrospray ionization (ESI) in the negative ionization mode. The method allowed qualitative (identification and structure elucidation) and relative quantitative determination of various classes of GPs including phosphatidylcholines, phosphatidylethanolamines, phosphatidylinositols, phosphatidylserines, phosphatidic acids, phosphatidylglycerols, and cardiolipins in a single experiment. Chromatographic separation was optimized by the examination of different buffer systems and special emphasis was paid on the detection by ESI‐MS. The hybrid LIT‐FTICRMS system was operated in the data‐dependent mode, switching automatically between FTICRMS survey scans and LIT‐MS/MS experiments. Thereby, exact masses for elemental composition determination and fragmentation data for identification and assignment of fatty acid residues are provided at the same time. The low absolute instrumental limits of detection (0.05 pmol for phosphatidylglycerol to 1 pmol for phosphatidic acid) complemented by a linear dynamic range of 1.5 to 2.5 orders of magnitude facilitated the relative quantification of GP species in a lipid extract from Saccharomyces cerevisiae. The developed method is a valuable tool for in‐depth GP profiling of biological systems. Copyright © 2009 John Wiley & Sons, Ltd.     

Analytical determination of nicotine in tobacco leaves by gas chromatography–mass spectrometry

A preliminary investigation using gas chromatography–mass spectrometry (GC–MS) to analyze the nicotine contained in tobacco leaves was carried out. Nicotine is an alkaloid and tobacco leaves was extracted with methanol and determined by GC–MS. The detection limit for nicotine was at the ppm level for non selective monitoring and the nanogram level for selective detection. This is a simple chromatography–mass spectrometry method for the analysis of nicotine in tobacco leave. Compared to other currently utilized methods for the detection of nicotine in tobacco leaves, the GC–MS provided advantages of high sensitivity, nicotine specific detection and lower instrumentation cost.     

Ultratrace determination of highly hydrophilic compounds by 2,2,3,3,4,4,5,5-octafluoropentyl chloroformate-mediated derivatization directly in water

Highly hydrophilic compounds, with multiple carboxylic, hydroxylic, or aminic groups, have been determined at ultratrace level (3–30 fmol injected) in aqueous solution by direct derivatization with 2,2,3,3,4,4,5,5-octafluoropentyl chloroformate, followed by n-hexane extraction and analysis by gas chromatography-electron capture negative ion mass spectrometry (GC-ECNI-MS). The products have high molecular weights, but also high volatility, making their elution from the GC column efficient. The derivatizing agent was synthesized from the corresponding alcohol and phosgene. The derivatization reaction is catalyzed by a pyridine solution of N,N-dicyclohexylcarbodiimide. At 200 °C ion-source temperature, most negative ion mass spectra showed only a weak or no molecular ion, but a controlled and interpretable fragmentation, allowing the derivatives to be easily monitored by high-mass ion chromatograms. Typical distinctive fragments are located in the m/z 500–800 mass range. Optimization of the operating conditions for the derivatization was performed. This was done in order to minimize number and intensity of peaks due to the hydrolysis of chloroformate in the total ion chromatogram. Calibration curves proved linear over two orders of magnitude concentration.     

Flow injection determination of iodide ion in a photographic developing solution using iodide ion-selective electrode detector

A potentiometric flow injection determination method for iodide ion in a photographic developing solution was proposed by utilizing a flow-through type iodide ion-selective electrode detector. The sensing membrane of the electrode was Ag₂S–AgI membrane. The response of the electrode detector as a peak-shape signal was obtained for injected iodide ion in a photographic developing solution. A linear relationship in the subnernstian zone was found to exist between peak height and the concentration of the iodide ion in a photographic developing solution in a concentration range from 0 to 6.0×10⁻⁵ mol l⁻¹. The relative standard deviation for ten injections of 2×10⁻⁵ mol l⁻¹ iodide ion in a photographic developing solution was 0.96% and the sampling rate was approximately 12–13 samples h⁻¹. The iodide ion could be determined under coexisting of an organic reducing reagent and inorganic electrolytes of high concentration in a photographic developing solution sample solution by the present method.     

Synthesis and ion exchange behaviour of polyaniline Sn(IV) arsenophosphate: a polymeric inorganic ion exchanger

Incorporation of a polymer material into an inorganic ion exchanger provides a class of hybrid ion exchangers with a good ion exchange capacity, high stability, reproducibility and selectivity for heavy metals. Such a type of ion exchanger ‘polyaniline Sn(IV) arsenophosphate’ has been synthesized by mixing polyaniline into inorganic material. This material is characterized using X-ray, IR, TGA studies in addition to ion exchange capacity, pH-titration, elution and distribution behaviour. On the basis of distribution studies, the material has been found to be highly selective for Pb(II). Kinetic study of exchange for the metal ions has been performed and some physical parameters such as self diffusion coefficient D₀, energy E_a and entropy ΔS* of activation have been determined.     

Fourier transform ion cyclotron resonance mass spectrometry using atmospheric pressure photoionization for high-resolution analyses of corticosteroids

Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS) was coupled with atmospheric pressure photoionization (APPI) for the first time and used for the analysis of several corticosteroids.1 The analytes showed excellent response using APPI when compared with both electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI). APPI has the advantage of requiring less heat for desolvation, resulting in less thermal degradation of the analytes and higher signal-to-noise than APCI. In terms of ultimate sensitivity, APPI is more efficient than either ESI or APCI for the analysis of corticosteroids. With some compounds, the high-resolution capability of FTICRMS was necessary to obtain an accurate mass due to contributions of the M(+.) (13)C isotope in the [M+H](+) ion peak.     

A new chelating sorbent for metal ion extraction under high saline conditions

A new chelating polymeric sorbent was developed by functionalizing Amberlite XAD-16 with 1,3-dimethyl-3-aminopropan-1-ol via a simple condensation mechanism. The newly developed chelating matrix offered a high resin capacity and faster sorption kinetics for the metal ions such as Mn(II), Pb(II), Ni(II), Co(II), Cu(II), Cd(II) and Zn(II). Various physio-chemical parameters like pH-effect, kinetics, eluant volume and flow rate, sample breakthrough volume, matrix interference effect on the metal ion sorption have been studied. The optimum pH range for the sorption of the above mentioned metal ions were 6.0–7.5, 6.0–7.0, 8.0–8.5, 7.0–7.5, 6.5–7.5, 7.5–8.5 and 6.5–7.0, respectively. The resin capacities for Mn(II), Pb(II), Ni(II), Co(II), Cu(II), Cd(II) and Zn(II) were found to be 0.62, 0.23, 0.55, 0.27, 0.46, 0.21 and 0.25 mmol g⁻¹ of the resin, respectively. The lower limit of detection was 10 ng ml⁻¹ for Cd(II), 40 ng ml⁻¹ for Mn(II) and Zn(II), 32 ng ml⁻¹ for Ni(II), 25 ng ml⁻¹ for Cu(II) and Co(II) and 20 ng ml⁻¹ for Pb(II). A high preconcentration value of 300 in the case of Mn(II), Co(II), Ni(II), Cu(II),Cd(II) and a value of 500 and 250 for Pb(II) and Zn(II), respectively, were achieved. A recovery of >98% was obtained for all the metal ions with 4 M HCl as eluting agent except in the case of Cu(II) where in 6 M HCl was necessary. The chelating polymer showed low sorption behavior to alkali and alkaline earth metals and also to various inorganic anionic species present in saline matrix. The method was applied for metal ion determination from water samples like seawater, well water and tap water and also from green leafy vegetable, from certified multivitamin tablets and steel samples.     

Study on the reactions of pyridine with fluorine-containing compounds in the gas-phase by electron impact/Fourier transfer ion cyclotron resonance mass spectrometry

The gas-phase ion-molecule reactions of pyridine and fluorine-containing compounds have been studied by the electron impact/Fourier transfer ion cyclotron resonance mass spectrometry (EI/FTICRMS). Comparing the reaction of the standard sample perfluorotributylamine (PFTBA), in the case of 3-oxa-5-iodo-octafluoropentylsulfonyl azide (ICF₂CF₂OCF₂CF₂SO₂N₃), a series of addition-elimination products and loss 28 from the expected adducts were obtained. Possible reaction mechanism was discussed, which was consistent with the results obtained in the condensed phase. These results demonstrated that EI/FTICRMS is a complementary technique for study of the organic reactions.     

Ion chromatographic determination of some anions and alkaline cations in liquid crystal materials after ultraviolet irradiation

A method was developed for the quantitative determination of inorganic cations and anions present in liquid crystal materials pretreated with ultraviolet irradiation by ion chromatography. The samples were irradiated at less than 20±2 °C and then pretreated with OnGuard RP and P cartridges to remove the interferential organic compounds prior to ion chromatographic analysis for both cations and anions. With a high capacity and very hydrophilic anion exchange column, four anions (fluoride, chloride, bromide, iodide) were determined in 20 min with gradient of sodium hydroxide. By employing a cation exchange column, five cations (sodium, ammonium, potassium, magnesium, calcium) could be determined in 12 min. The spiked recoveries for the cations and anions were 84.0–108.1% and 86.1–108.2%, respectively.     

Study on the reactions of pyridine with fluorine-containing compounds in the gas phase by electron impact/Fourier transfer ion cyclotron resonance mass spectrometry

The gas-phase ion-molecule reactions of pyridine and fluorine-containing compounds have been studied by the electron impact/Fourier transfer ion cyclotron resonance mass spectrometry (EI/FTICRMS). Comparing the reaction of the standard sample perfluorotributylamine (PFTBA), in the case of 3-oxa-5-iodo-octafluoropentylsulfonyl azide (ICF₂CF₂OCF₂CF₂SO₂N₃), a series of addition-elimination products and loss 28 from the expected adducts were obtained. A possible reaction mechanism was discussed, which was consistent with the results obtained in the condensed phase. These results demonstrated that EI/FTICRMS is a complementary technique for study of the organic reactions.     

Analysis of acrylamide in different foodstuffs using liquid chromatography–tandem mass spectrometry and gas chromatography–tandem mass spectrometry

Acrylamide levels over a wide range of different food products were analysed using both liquid chromatography–tandem mass spectrometry (HPLC–MS–MS) and gas chromatography–tandem mass spectrometry (GC–MS–MS). Two different sample preparation methods for HPLC–MS–MS analysis were developed and optimised with respect to a high sample throughput on the one hand, and a robust and reliable analysis of difficult matrices on the other hand. The first method is applicable to various foods like potato chips, French fries, cereals, bread, and roasted coffee, allowing the analysis of up to 60 samples per technician and day. The second preparation method is not as simple and fast but enables analysis of difficult matrices like cacao, soluble coffee, molasses, or malt. In addition, this method produces extracts which are also well suited for GC–MS–MS analysis. GC–MS–MS has proven to be a sensitive and selective method offering two transitions for acrylamide even at low levels up to 1 μg kg⁻¹. For the respective methods the repeatability (n=10), given as coefficient of variation, ranged from 3% (acrylamide content of 550 μg kg⁻¹) to 12% (acrylamide content of 8 μg kg⁻¹) depending on the food matrix. The repeatability (n=3) for different food samples spiked with acrylamide (5–1500 μg kg⁻¹) ranged from 1 to 20% depending on the spiking level and the food matrix. The limit of quantification (referred to a signal-to-noise ratio of 9:1) was 30 μg kg⁻¹ for HPLC–MS–MS and 5 μg kg⁻¹ for GC–MS–MS. It could be demonstrated that measurement uncertainties were not only a result of analytical variability but also of inhomogeneity and stability of the acrylamide in food.