Bis(NHC)-Pd(II) complexes as highly efficient catalysts for allylation of aldehydes with allyltributyltin

Novel cis-chelated bidentate bis(NHC)-Pd(II) complexes derived from 1,1′-binaphthyl-2,2′-diamine (BINAM) bearing weakly coordinating acetate or trifluoroacetate counterions have been synthesized and their structures have been characterized by X-ray diffraction of single crystals. We found that these bis(NHC)-Pd(II) complexes were highly effective in the allylation of aldehydes with allyltributyltin to give the corresponding products in good to excellent yields in most cases at room temperature.     

A novel axially chiral 2,2'-bipyridine N,N'-dioxide. Its preparation and use for asymmetric allylation of aldehydes with allyl(trichloro)silane as a highly efficient catalyst

[reaction: see text] New axially chiral 2,2'-bipyridine N,N'-dioxides were obtained by a new method that does not involve any procedures for the separation of enantiomers. One of the dioxides, (R)-3,3'-bis(hydroxymethyl)-6,6'-diphenyl-2,2'-bipyridine N,N'-dioxide, exhibited extremely high catalytic activity for the asymmetric allylation of aldehydes with allyl(trichloro)silane. The allylation of aromatic aldehydes proceeded in the presence of 0.01 or 0.1 mol % of the dioxide catalyst to give the corresponding homoallyl alcohols of up to 98% ee.     

Copper(II) tetrafluoroborate as a novel and highly efficient catalyst for acetal formation

Commercially available copper(II) tetrafluoroborate hydrate has been found to be a highly efficient catalyst for dimethyl/diethyl acetal formation in high yields from aldehydes and ketones by reaction with trimethyl/triethyl orthoformate at room temperature and in short period. Acetalisation was carried out under solvent-free conditions with electrophilic aldehydes/ketones. For weakly electrophilic aldehydes/ketones (e.g., benzaldehyde, cinnamaldehyde and acetophenone) and for aldehydes having a substituent that can coordinate with the catalyst, the corresponding alcohol was used as solvent.     

β-Cyclodextrin promoted allylation of aldehydes with allyltributyltin under supramolecular catalysis in water

A novel and highly efficient allylation of aldehydes using allyltributyltin has been developed in aqueous medium catalyzed by β-cyclodextrin in the presence of HCl without any metal catalysts to afford the corresponding homoallylic alcohols in good yields. The β-cyclodextrin can be recovered and reused for a number of runs without significant loss of activity.     

Ti-exchanged ZSM-5 as heterogeneous catalyst for allylation of aldehydes with allyltributylstannane

Titanium exchanged ZSM-5 catalyst has been prepared by treating an aqueous solution of titanium (IV) chloride with ZSM-5. The supported catalyst has been explored as effective and reusable catalyst for allylation reaction of aldehydes with allyltributylstannane. The new catalytic system promotes efficiently the allylation reaction in toluene condition to produce homoallylic alcohols in high yield.     

Chiral phosphine oxide BINAPO as a catalyst for enantioselective allylation of aldehydes with allyltrichlorosilanes

The effectiveness of chiral phosphine oxide BINAPO as a catalyst for the enantioselective addition of allyltrichlorosilanes to aldehydes was demonstrated, wherein the combination of diisopropylethylamine and tetrabutylammonium iodide as additives is crucial for accelerating the catalytic cycle.     

Nickel(II) chloride as an efficient and useful catalyst for chemoselective thioacetalization of aldehydes

A wide variety of acyclic and cyclic dithioacetals can be prepared chemoselectively from the corresponding aldehydes by employing a catalytic amount of nickel(II) chloride in dry CH₂Cl₂-MeOH (5:1) at room temperature in good yields. Some of the major advantages of this procedure are high chemoselectivity, ease of operation, high yields and also compatibility with other protecting groups.     

A new polypyridyl-based Ru (II) complex as a highly efficient electrocatalyst for CO2 reduction

A new polypyridyl Ru (II) complex, cis-[Ru (Me₄phen)₂(CH₃CN)₂](NO₃)₂ (Me₄phen = 3,4,7,8-tetramethyl-1,10-phenanthroline) has been prepared and fully characterized by elemental analysis, X-ray crystallography, cyclic voltammetry and spectroscopic techniques. The solid-state structure of the complex indicated that the Ru (II) center is sitting in an N₄N′₂ coordination environment with a distorted octahedral geometry. Cyclic voltammetry technique was used to investigate the catalytic activity of the Ru (II) complex on the electrocatalytic reduction of CO₂ to CO in acetonitrile. The effect of the different reaction parameters, including the scan rate, concentration of the electrocatalyst [complex Ru (II)] and reaction temperature, on the catalytic activity was also investigated. The results showed that the electrocatalytic activity of the complex increases with increasing electrocatalyst concentration and scan rate. Further, the CO₂ reduction peak current decreases at lower temperatures owing to the inverse relationship between the temperature and activation energy. The theoretical calculations confirmed the proposed electrocatalytic mechanism comprising seven steps.     

A new copper(II) complex as an efficient catalyst of luminol chemiluminescence

A new copper complex (2) has exhibited highly efficient catalytic activity of luminol chemiluminescence in water in the presence of ascorbic acid and dissolved O2 under conditions that conventional catalysts such as Cu(OAc)2, hemin or cyclen-Cu(II) did not show significant activity.     

Palladium(II) complex with a potential N4-type Schiff-base ligand as highly efficient catalyst for Suzuki-Miyaura reactions in aqueous media

Two new air-stable palladium(II) complexes containing a N₄-Schiff-base ligand have been synthesized and investigated as catalysts for the Suzuki-Miyaura reactions. The binuclear complex 2 has proven to be an excellent catalyst for additive-free Suzuki-Miyaura reactions of aryl bromides in neat water at room temperature and aryl chlorides in aqueous-glycerol at 80 °C. Satisfactory to excellent yields of biaryls are obtained with a wide range of substrates with relatively low loading of catalyst.     

Copper perchlorate hexahydrate: a highly efficient catalyst for the cyanosilylation of aldehydes

Cu(ClO₄)₂·6H₂O has been found to be an efficient catalyst for cyanosilylation reaction of aldehydes in THF at room temperature with low catalytic loading (1.0 mol%) in short reaction time (mostly within 10 min). Copyright © 2008 John Wiley & Sons, Ltd.     

Catalytic asymmetric allylation of aldehydes via a chiral indium(III) complex

A chiral indium complex has been discovered to effect high enantioselectivities in the addition of allyltributyl stannanes to aldehydes. The allylation of a variety of aromatic, alpha,beta-unsaturated and aliphatic aldehydes resulted in good yields and high enantioselectivities (90-96% ee).     

A polymer-supported diacetatobis(2-quinolylbenzimidazole)copper(II) complex as an efficient catalyst for oxidation of alcohols with tert-butyl hydroperoxide

A polymer-supported diacetatobis(2-quinolylbenzimidazole)copper(II) complex [PS–(QBIM)₂Cu(II)] was synthesized by functionalization of chloromethylated polystyrene cross-linked with 6.5 % divinyl benzene with 2-(2′-quinolyl)benzimidazole and subsequent treatment with Cu(OAc)₂ in methanol. The complex was characterized by physical, analytical and spectroscopic techniques. Electronic and ESR spectra, together with magnetic susceptibility measurements, indicated that the complex was paramagnetic with distorted octahedral geometry around the copper. The complex was found to be active toward oxidation of various alcohols including phenol, benzyl alcohol and cyclohexanol using 70 % aqueous tert-butyl hydroperoxide under mild conditions. Under the optimized reaction conditions, cyclohexanol gave 100 % conversion to cyclohexanone, benzyl alcohol gave 98 % yield of benzaldehyde and phenol gave 89 % yield of catechol and 4 % of hydroquinone. The complex was recycled five times without much loss in catalytic activity.     

A convenient and highly efficient method for the protection of aldehydes using very low loading hydrous ruthenium(III) trichloride as catalyst

A convenient method for the chemoselective protections of both aliphatic and aromatic aldehydes has been developed. Ruthenium(III) trichloride (0.1 mol %) has found to be an highly efficient catalyst in the acetalizations of aldehydes with various simple alcohols such as methanol, ethanol, or diols such as 1,2-ethylanediol and 1,3-propanediol under mild reaction conditions.     

A novel fumed silica-supported nitrogenous platinum complex as a highly efficient catalyst for the hydrosilylation of olefins with triethoxysilane

A novel fumed silica-supported nitrogenous platinum complex was conveniently prepared from cheap γ-aminopropyltriethoxysilane via immobilization on fumed silica in toluene, followed by a reaction with hexachloroplatinic acid. The title complex was characterized by fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). It was found that the complex is an efficient and stable catalyst for the hydrosilylation of olefins with triethoxysilane. The title platinum complex could be separated by simple filtration and reused several times without any appreciable loss in the catalytic activity.     

Organometallic titanocene complex as highly efficient bifunctional catalyst for intramolecular Mannich reaction

Bifunctional catalysts bearing two catalytic sites, Lewis acidic organometallic titanocene and Brønsted acidic COOH, have been assembled in situ from Cp₂TiCl₂ with carboxylic acid ligands, showing high catalytic activity over an intramolecular Mannich reaction towards synthesis of 2‐aryl‐2,3‐dihydroquinolin‐4(1H)‐ones. The determination of the bifunctional catalyst Cp₂Ti(C₈H₄NO₆)₂ was elucidated by single X‐ray HR‐MS and investigation of catalytic behavior. In particular, masking the Brønsted acidic COOH catalytic site with dormant COOMe lowered the reaction yield greatly, indicating that two catalytic sites work together to maintain high catalytic efficiency.     

NCS with thiourea as highly efficient catalysts for acetalization of aldehydes

NCS/thiourea-mediated acetalization of aldehydes and alcohols has rapidly provided acetals in almost quantitative yields.     

Catalytic enantioselective allylation of aldehydes via a moisture-tolerant chiral BINOL-In(III) complex

A moisture-tolerant chiral indium complex has been developed to effect good enantioselectivities in the addition of allyltributylstannanes to aldehydes. The allylation of a variety of aromatic, α,β-unsaturated and aliphatic aldehydes resulted in both moderate to good yields and high enantioselectivities (up to 86% ee).