高效液相色谱-串联质谱联用测定人血液中的全氟化合物

采用HPLC-ESI-MS/MS联用技术,建立了分析血样中9种全氟化合物(PFCs)的方法.以13C4标记的PFOS (MPFOS)作为内标物.以C18反相柱为分析柱,甲醇、醋酸铵为梯度洗脱淋洗液,9种分析物包括全氟己烷磺酸(PFHxS)、全氟庚酸(PFHpA)、全氟辛酸 (PFOA)、全氟辛烷磺酸(PFOS)、全氟壬酸(PFNA)、全氟癸酸(PFDA)、全氟十一酸(PFUnDA)、全氟十二酸(PFDoDA)和全氟十四酸(PFTA),在15 min内即可达到良好的分离.在血样前处理中,采用MTBE液-液萃取和固相萃取相结合的方法,进一步净化样品以延长色谱柱寿命;比较了4种固相萃取小柱对全氟化合物的萃取性能,最终选定HLB柱(Waters).本研究还讨论了两种C18反相柱Acclaim 120(50 mm×4.6 mm, 3 μm)和Acclaim120 (250 mm×4.6 mm, 5 μm)(Dionex) 对PFCs的分析性能,在本实验条件下,两种色谱柱具有相似的分离性能及检出限,线性范围在0.1～50 μg/L之间 (r≥0.9957);对于血液样品该方法的检出限在0.03～0.8 μg/L之间.本研究将该方法成功地应用于血样实际样品中全氟化合物的测定,加标回收除PFTA较低外,其它化合物均在74.2%～118.1%之间.     

气相法分析血浆中的全氟辛酸

 采用气相 电子捕获法测定了人血浆中全氟辛酸的含量。将血浆中的全氟辛酸酯化后进行分析 ,以全氟癸酸为内标。柱为HP 1熔融石英毛细管柱 (30m× 0 2 5mmi.d .× 0 2 5 μm)。方法的线性范围为 2 0 0 0μg/L～ 4 0 0× 10 3 μg/L ,线性相关系数r =0 994 6。平均回收率为 99 2 % ,相对标准偏差 (RSD)为 0 95 % ,血浆中全氟辛酸的检出限为 6 0 μg/L。方法准确、可靠 ,分析结果令人满意。     

柱切换-荧光检测反相高效液相色谱法测定血浆中特布他林浓度

采用柱切换技术 荧光检测反相高效液相色谱法测定血浆中特布他林 (TB)浓度。使用LunaC8( 2 )和KromasilC18为分析柱 ( 1 5 0mm× 4.6mm ,5 μm)和预处理柱 ( 2 5mm× 4.6mm ,5 μm) ,流动相分别为pH 3 0 ,0 .0 3 3mol/L磷酸盐缓冲液∶甲醇∶乙腈 ( 92∶7∶1 )和水∶甲醇∶乙腈 ( 97∶2∶1 ) ,流速均为 1 .0ml/L。血浆样品经乙腈沉淀蛋白后进样 ,切换时间为 3 .2～ 4.2min。荧光检测 ,λex为 2 80nm ,λem为 3 0 9nm。以沙丁胺醇作内标 ,按内标法定量。标准曲线线性范围为 0 .8～ 3 2 μg/L ;最低定量限为 0 .8μg/L;TB和内标的保留时间分别为 8.7和 9.3min;日内RSD小于 4% ,日间RSD小于 9% ,方法回收率在 93 %～ 1 1 2 %。     

气相色谱-质谱法测定氟涂料中全氟辛酸及其盐类物质

超声萃取技术萃取氟涂料中的全氟辛酸及其盐类物质,萃取液经固相萃取、浓缩后与乙酰化试剂反应,以全氟癸酸甲酯为内标物内标法进行定量测定.对气相色谱-质谱条件进行选择,方法的线性范围为1.0～1×105μg·L-1,相关系数为0.9997,检出限为0.1μg·L-1,在高低两种浓度水平(100 μg·L-1及1000 μg·L-1 PFOA)进行精密度和回收率试验,所得相对标准偏差分别为4.24%和3.58%,回收率在86%～111%之间.     

Determination of Perfluorooctanoic Acid (PFOA) in Plastic Component of the Household Appliances by High Performance Liquid Chromatography Tandem Mass Spectrometry

建立了高效液相色谱-串联质谱( HPLC - MS/MS)结合加速溶剂萃取测定小型家用电器塑料部件中全氟辛酸(PFOA)的分析方法.样品冷冻粉碎后采用甲醇作溶剂进行快速溶剂萃取,萃取液经C18固相萃取柱富集净化后,以C18柱为分离柱,以甲醇-水为流动相,梯度洗脱,电喷雾负离子模式下多反应监测(MRM))模式检测.PFOA在0.5～100.0 μg/L范围内线性关系良好(r2=0.998 9),回收率为93％～ 107％,相对标准偏差为2.9％～7.6％,检出限(S/N =3)为0.5μg/kg.该方法操作简便、灵敏度高,适用于小型家用电器塑料部件中全氟辛酸残留分析.     

高效液相色谱-质谱联用技术测定人血浆中的西替利嗪

建立了人血浆中西替利嗪的液相色谱-质谱联用测定方法.血浆样品调至pH 6,经V(乙酸乙酯):V(CH2Cl2)＝4:1液-液提取后,以Agilent Zorbax SB-C18(2.1 mm×150 mm i.d.,3.5 μm)柱为色谱柱,流动相为V(乙腈):V(1%甲酸水)＝55:45溶液,流速为0.5 mL/min,柱温:25 ℃,进样量:5 μL,在Agilent 1100 LC/MSD XCT离子阱质谱仪上,以多重反应离子(MRM)方式进行定量分析,用于监测的离子为m/z 389→201(西替利嗪)和m/z 515→497(替米沙坦,内标物).西替利嗪的检出限为0.50 μg/L(S/N=3),线性范围为2.5～400 μg/L,方法回收率在82.0%～86.7%之间(n=5),精密度与准确度符合生物样品分析要求.该法可用于西替利嗪临床血药浓度和药代动力学研究.     

超高效液相色谱-质谱法测定地下水中全氟辛酸(PFOA)和全氟辛基磺酸(PFOS)

地下水中全氟辛酸(perfluorooctanoic acid, PFOA)和全氟辛基磺酸(perfluorooctanesulfonic acid, PFOS)检测具有重要的环境污染物控制意义,目前主要依赖固相萃取-液质联用内标法技术。文中开发了一种适用于地下水直接进样,乙酸铵-水溶液和乙腈溶液梯度洗脱,高效液相色谱-串联质谱法(HPLC-MS/MS)的多反应监测(MRM)模式的外标检测方法。标准溶液在0.05～1μg·L^-1范围内,浓度与响应值有良好的线性关系,相关系数超过0.99,方法的检出限达到PFOA:0.01μg·L^-1,PFOS:0.01μg·L^-1;回收率为PFOA:101%～103%、PFOS:94.0%～96.5%;相对标准偏差(RSD)为PFOA:1.4%～3.5%(n=6),PFOS:1.3%～9.6%(n=6)。结果表明,该方法前处理简便,灵敏度高、重现性好、准确度高,分析速度快,适用于地下水中PFOA和PFOS的大批量定性、定量检测。     

超高效液相色谱-串联质谱法测定食品包装材料中全氟辛烷磺酸盐

建立了超高效液相色谱-串联质谱(UPLC- MS/MS)测定食品包装材料中全氟辛烷磺酸盐(PFOS)的方法.采用乙腈作为溶剂,加速溶剂提取法提取食品包装材料中的PFOS.色谱条件:ACQUITY UPLC BEH C₁₈色谱柱（1.7 μm,2.1 mm×50 mm）;柱温:30 ℃;流动相:乙腈/水,梯度洗脱;流速:0.2 mL/min;经UPLC分离后用多级反应监测(MRM)方式测定.用2个子离子的相对丰度定性, 外标法定量.PFOS在0.005～0.500 μg/mL范围内线性良好(R2=0.999),PFOS的回收率为90.0%～101.6%,相对标准偏差RSD为1.5%～3.5%.方法检出限为0.1 μg/m2(S/N≥3).     

毛细管色谱法测定芳香异羟肟酸二丁基锡中有机溶剂残留量

建立了毛细管气相色谱法测定芳香异羟肟酸二丁基锡中的有机溶剂残留量.采用HP-5 (5%苯基甲基聚硅氧烷)毛细管色谱柱,FID检测器.载气为N2,柱温为45 ℃,检测器温度为160 ℃,流速为1.2 mL/min,分流比为20∶1,四氢呋喃为内标进行测定.结果表明: 甲醇、无水乙醇、三氯甲烷、正己烷、苯的线性范围分别为: 7.9～63.2 μg/mL (r=0.9991),8.69～69.52 μg/mL (r=0.9999),19.77～158.16 μg/mL (r=0.9990),295.6～2364.8 μg/mL (r=0.9996),8.74～69.92 μg/mL (r=0.9996),平均回收率分别为104.2%、 98.8%、 97.9%、 103.1%和102.0%,RSD分别为1.6%、 2.3%、 2.1%、 3.8%和1.9% (n=9);检出限分别为3.16、 3.47、 23.90、 1.97和0.87 ng.方法可用于有机溶剂残留量的测定.     

液相色谱-串联质谱法测定小型家用电器塑料部件中全氟辛酸

建立了高效液相色谱-串联质谱(HPLC-MS/MS)结合加速溶剂萃取测定小型家用电器塑料部件中全氟辛酸(PFOA)的分析方法。样品冷冻粉碎后采用甲醇作溶剂进行快速溶剂萃取,萃取液经C18固相萃取柱富集净化后,以C18柱为分离柱,以甲醇-水为流动相,梯度洗脱,电喷雾负离子模式下多反应监测(MRM))模式检测。PFOA在0.5～100.0μg/L范围内线性关系良好(r2=0.998 9),回收率为93%～107%,相对标准偏差为2.9%～7.6%,检出限(S/N=3)为0.5μg/kg。该方法操作简便、灵敏度高,适用于小型家用电器塑料部件中全氟辛酸残留分析。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.