TODGA/[C_2mim][NTf_2]萃取Th~(4+)

研究了N,N,N′,N′-四辛基-3-氧戊二酰胺(TODGA)溶于疏水性离子液体咪唑类离子液体1-乙基-3-甲基咪唑双三氟甲磺酰亚胺盐([C2mim][NTf2])中对硝酸水溶液体系中四价钍离子(Th4+)的萃取行为。详细考察了接触时间、酸度、Th4+浓度、TODGA浓度、温度对TODGA/[C2mim][NTf2]体系萃取性能的影响。作为对比,我们还考察了TODGA在传统有机溶剂异辛烷中对Th4+的萃取。结果表明:TODGA/[C2mim][NTf2]体系对Th4+的萃取是吸热反应,且在50℃下,能在5 min内达到平衡。萃取体系随着酸度对Th4+的萃取性能先降后增大;Th4+浓度的增大,TODGA浓度的降低,对Th4+的萃取性能下降。TODGA在离子液体萃取体系中比在有机体系中有更好的Th4+萃取效果,特别是在低酸条件下。通过萃取机理研究,推测出在低酸下萃取反应是离子交换且TODGA与Th4+配比为2∶1,在高酸下萃取是中性配位。     

咪唑基离子液体的物理化学性质估算及预测(英文)

根据经验和半经验方程及空隙模型理论,可以估算及预测离子液体在298.15K的物理化学性质.本文讨论了离子液体的分子体积,密度,标准熵,晶格能,表面张力,等张比容,摩尔蒸发焓,空隙体积,空隙率和热膨胀系数.通过实验测得的三种离子液体1-乙基-3-甲基咪唑硫酸乙酯([C2mim][EtSO4)]),1-丁基-3-甲基咪唑硫酸辛酯([C4mim][OcSO4])和1-乙基-3-甲基咪唑双三氟甲磺酰亚胺盐([C2mim][NTf2])的密度和表面张力估算了它们的其它物理化学性质.由这三种离子液体的分子体积及等张比容预测了同系列中其它离子液体[Cnmim][EtSO4],[Cnmim][OcSO4]和[Cnmim][NTf2](n=1-6)的分子体积及等张比容,由此计算出它们的密度及表面张力.进而预测了它们的物理化学性质.将预测的离子液体[C4mim][NTf2]和[C2mim][OcSO4]的密度值与文献报导的实验值进行比较,其偏差在实验误差范围内.最后,将由Kabo经验方程计算的七个离子液体[C2mim][EtSO4]、[C4mim][OcSO4]、[C2mim][NTf2]、[C4mim][NTf2]、丁基三甲基铵双三氟甲磺酰亚胺盐([N4111][NTf2])、甲基三辛基铵双三氟甲磺酰亚胺盐([N8881][NTf2])和1-辛基-3-甲基吡啶四氟硼酸盐([m3opy][BF4])的摩尔蒸发焓与由Verevkin简单规则预测的摩尔蒸发焓进行比较,发现两者符合很好.因此,在缺乏密度和表面张力实验数据的情况下,可以用Verevkin简单规则来预测离子液体的摩尔蒸发焓.     

新型离子液体介质中长链烯烃氢甲酰化反应

合成和表征了离子液体[Rmim][p-CH3C6H4SO3](R=CH3(CH2)n—, n=3, 7, 11, 15), 并以所合成的离子液体为反应介质, 考察了水溶性铑膦络合物HRh(CO)(TPPTS)3[TPPTS: P(m-C6H4SO3Na)3]对长链烯烃氢甲酰化反应的催化性能. 结果表明, 离子液体[Rmim][p-CH3C6H4SO3]中R基团链长的变化对催化活性具有重要的影响；而在相同离子液体中, 氢甲酰化反应活性随着烯烃链长的增加明显下降. 与文献报道中广泛使用的离子液体[Bmim]BF4、[Bmim]PF6相比, 该催化体系对长链烯烃氢甲酰化反应具有更好的活性和化学选择性, 在3.0 MPa, 100 ℃的条件下, 1-己烯氢甲酰化反应转化频率(TOF)高达2736 h-1. 反应完成后, 水溶性铑膦络合物能很好地溶解在离子液体中, 与有机物自动分层, 催化剂的循环使用易于实现.     

磺酸功能化双核离子液体催化合成双酚F

合成并表征了4种具有Brnsted酸性的磺酸功能化咪唑类离子液体催化剂,考察了其在催化苯酚、甲醛合成双酚F反应中的催化活性.结果表明磺酸功能化双核离子液体双-(3-磺酸丙基-1-咪唑)亚丁基硫酸氢盐([DPSIM][HSO4]2)不仅催化活性最佳,还提高了4,4’-双酚F异构体的含量.以[DPSIM][HSO4]2为催化剂,在苯酚与甲醛摩尔比30∶1、离子液体催化剂质量浓度6.8%、反应温度90℃、反应时间60 min的优化条件下,双酚F收率可达94.1%,同时提出了其催化合成双酚F的反应机理.该离子液体催化剂腐蚀性低,易分离回收,在重复使用6次后,双酚F收率仍在70%以上.     

全氟辛基磺酰亚胺稀土(Ⅲ)催化氟两相Friedel-Crafts烷基化反应

制备了全氟辛基磺酰亚胺盐(M[N(SO2C8F17)2]n,n:3,4),并用于催化氟两相烷基化反应。考察了催化剂种类、反应时间、反应温度和催化剂用量对烷基化反应的影响,同时探讨了Yb[N(SO2C8F17)2]3对烷基化试剂摩尔比为0.2%时,催化烷基化试剂与不同芳烃的反应,表明Yb[N(SO2C8F17)2]3是一种有效的烷基化催化剂。含有催化剂的氟相通过简单的相分离后,可回收利用。氟相重复使用5次,其催化活性降低不大。     

功能离子液体复合体系中钯催化的Heck偶联反应

在[BMIM][TPPMS]离子型膦配体和碱性离子液体 [BMIM][OAc] 组成的功能离子液体复合体系中, PdCl2(CH3CN)2可以有效地催化溴苯和丙烯酸乙酯的交叉偶联(Heck)反应, 产物肉桂酸乙酯(反式)的收率达到60%. 锚定在功能离子液体复合体系中的Pd催化剂循环使用11次后仍保持良好的活性和稳定性. 该催化剂体系的良好活性和稳定性可归因于三个方面: [BMIM][TPPMS]和[BMIM][OAc]间的协同配位效应; 以[BMIM][OAc]作为Heck反应的缚酸剂, 避免了无机盐粘稠物的形成; 生成的副产物[BMIM]Br可以有效溶解钯黑, 避免了钯黑的析出. 该离子液体催化体系对不同底物的Heck偶联反应也表现出良好的普适性.     

己内酰胺功能化离子液体的合成及其催化酯化性能的研究

以价格低廉的己内酰胺为原料,制备和表征了4种己内酰胺功能化离子液体:1-(3-磺丙基)己内酰胺硫酸氢盐([C3SO3HCP]HSO4)、1-(3-磺丙基)己内酰胺对甲苯磺酸盐([C3SO3HCP]PTSA)、1-(3-磺丙基)己内酰胺磷酸氢盐([C3SO3HCP]H2PO4)、1-(3-磺丙基)己内酰胺四氟硼酸盐([C3SO3HCP]BF4).以乙酸和乙醇的酯化反应考察4种酸性离子液体的催化活性,并与3种具有不同氮杂环的SO3H-功能化离子液体和浓硫酸相对照.结果表明:当n(C2H5OH)∶n(CH3COOH)=1∶1.5,催化剂[C3SO3HCP]HSO4用量为酸醇总质量的5%,反应温度80℃,反应时间6 h,酯收率可达93.8%,离子液体经真空干燥重复使用10次后,仍具有较高的催化活性,而且对奥氏体316 L不锈钢试样的腐蚀率不到浓硫酸的1/6.还考察了以[C3SO3HCP]HSO4为催化剂催化合成系列乙酯也获得了较高的酯收率,且离子液体均能与酯产物自动分相.与传统硫酸催化酯化相比,此类离子液体催化酯化具有生产成本低、过程清洁、腐蚀率低、使用周期长等优点,具有替代传统浓硫酸催化醇酸酯化反应的潜力.     

酸性离子液体中八聚钼酸盐相转移催化氧化脱硫的研究

制备了四种八聚钼酸盐催化剂:[(C4H9)4N]4Mo8O26,[(C12H25)N(CH3)3]4Mo8O26,[(C14H29)N(CH3)3]4Mo8O26和[(C16H33)N(CH3)3]4Mo8O26。通过元素分析,TG/DSC,FT-IR和紫外-可见光谱等方法对这四种催化剂的组成和结构进行了相应表征。研究了八聚钼酸季铵盐催化剂在酸性离子液体中相转移催化氧化脱硫活性。同时考察了在不同脱硫体系和催化剂、温度(T)、时间(t)、氧化剂(H2O2)用量、催化剂用量、以及酸性离子液体的种类等因素对脱硫效果的影响。经过对反应条件优化,当在70℃下反应3 h,n(H2O2)∶n(DBT)=4∶1,n(DBT)∶n(Catalyst)=10∶1,离子液体[(CH2)3SO3HMIm]BF4用量为1 mL,模拟油品中二苯并噻吩(DBT)脱除率可以达到98.3%,且循环反应6次后催化反应活性没有明显的下降,可以用来进行深度脱硫。最后,对该脱硫体系的脱硫机理进行了讨论。     

羧基功能化苯并三氮唑类离子液体的合成及在萃取-氧化脱硫中的应用

合成了新型离子液体(ILs)1-烷基-3-羧甲基苯并三氮唑双三氟甲磺酰亚胺盐,并对其进行了表征.将其与双氧水组成催化氧化体系,考察了脱除模型油品中硫化物的效果.结果表明,以离子液体1-5基-3-羧甲基苯并三氮唑双三氟甲磺酰亚胺盐[C2O2BBTA][NTf2]为萃取/催化剂,设定n(H2O2)∶n(S)=2.5∶1,m(模型油)∶m(离子液体)=5∶1,在75℃下反应1 h后,模型油中二苯并噻吩(DBT)、苯并噻吩(BT)和4,6-二甲基二苯并噻吩(4,6-DMDBT)的脱硫率分别为98.3%,98.3%和96.6%.所合成离子液体重复使用10次,脱硫率无明显变化.该方法操作简单、反应条件温和,可以实现深度脱硫.     

离子液体体系中氯化金属卟啉对苯甲醇的催化氧化反应

研究了一种将苯甲醇直接氧化成苯甲醛的催化体系:氯化金属卟啉/离子液体/氧化剂(MTPPCl/ILs/[O]),考察了该体系反应过程中温度、氯化金属卟啉、氧化剂、轴向配体和离子液体的种类等因素对反应收率的影响。结果表明,催化剂氯化锰卟啉、溶剂1-丁基-3-甲基咪唑硫酸氢盐离子液体、氧化剂过硫酸钾组成的催化体系MnTPPCl/[Bmim]HSO4/K2S2O8在苯甲醇直接催化氧化成苯甲醛的反应中表现出很好的活性(99%)和选择性(99%),且该体系避免了使用传统的有机溶剂,可重复多次使用。     

Vapochromic Ionic Liquids from Metal–Chelate Complexes Exhibiting Reversible Changes in Color,Thermal, and Magnetic Properties

Vapor‐ and gas‐responsive ionic liquids (ILs) comprised of cationic metal‐chelate complexes and bis(trifluoromethanesulfonyl)imide (Tf₂N) have been prepared, namely, [Cu(acac)(BuMe₃en)][Tf₂N] ( 1 a ), [Cu(Bu‐acac)(BuMe₃en)][Tf₂N] ( 1 b ), [Cu(C₁₂‐acac)(Me₄en)][Tf₂N] ( 1 c ), [Cu(acac)(Me₄en)][Tf₂N] ( 1 d ), and [Ni(acac)(BuMe₃en)][Tf₂N] ( 2 a ) (acac=acetylacetonate, Bu‐acac=3‐butyl‐2,4‐pentanedionate, C₁₂‐acac=3‐dodecyl‐2,4‐pentanedionate, BuMe₃en=N‐butyl‐N,N′,N′‐tetramethylethylenediamine, and Me₄en=N,N,N′,N′‐trimethylethylenediamine). These ILs exhibited reversible changes in color, thermal properties, and magnetic properties in response to organic vapors and gases. The Cu^II‐containing ILs are purple and turn blue‐purple to green when exposed to organic vapors, such as acetonitrile, methanol, and DMSO, or ammonia gas. The color change is based on the coordination of the vapor molecules to the cation, and the resultant colors depend on the coordination strength (donor number, DN) of the vapor molecules. The vapor absorption caused changes in the melting points and viscosities, leading to alteration in the phase behaviors. The IL with a long alkyl chain ( 1 d ) transitioned from a purple solid to a brown liquid at its melting point. The Ni^II‐containing IL ( 2 a ) is a dark red diamagnetic liquid, which turned into a green paramagnetic liquid by absorbing vapors with high DN. Based on the equilibrium shift from four‐ to six‐coordinated species, the liquid exhibited thermochromism and temperature‐dependent magnetic susceptibility after absorbing methanol.     

N-butylpyridinium bis-(trifluoromethylsulfonyl)imide ionic liquids as solvents for the liquid-liquid extraction of aromatics from their mixtures with alkanes: Isomeric effect of the cation

The liquid-liquid equilibria (LLE) of four ternary systems comprising toluene, heptane, and an ionic liquid with the cation N-butylpyridinium ([bpy]), or 2-methyl-N-butylpyridinium ([2bmpy]), or 3-methyl-N-butylpyridinium ([3bmpy]), or 4-methyl-N-butylpyridinium ([4bmpy]), and the anion bis-(trifluoromethylsulfonyl)imide ([Tf₂N]) were determined at 313.2 K and atmospheric pressure. The distribution ratios and the separation factor curves from the LLE data were plotted and compared to those for sulfolane. The results show no significant differences in the values of these parameters between [bpy][Tf₂N] and [2bmpy][Tf₂N], and between [3bmpy][Tf₂N] and [4bmpy][Tf₂N]. The experimental LLE data were satisfactorily correlated by means of the thermodynamic NRTL model.     

Ionic liquids from the cationic cobalt(III) Schiff base complex, [Co(acacen)L2][Tf2N] (acacen = N,N′-bis(acetylacetone)ethylenediamine,Tf2N = bis(trifluoromethanesulfonyl)amide)

Ionic liquids comprising cationic cobalt(III) complexes [Co(acacen)L₂][Tf₂N] (L?=?3-butylpyridine (1), 1-butylimidazole (2); acacen?=?N,N′-bis(acetylacetone)ethylenediamine, Tf₂N?=?bis(trifluoromethanesulfonyl)amide) were prepared. 1 is a liquid at room temperature and exhibits a glass transition at ?12?°C, whereas 2 is a solid at room temperature with a melting point of 74.6?°C and glass transition temperature of ?15?°C upon cooling from the melt. These salts are reddish brown diamagnetic materials that are stable against air and water; these properties differ from those of the corresponding iron(III) salt. Desorption of the axial ligands of 1 and 2 occurs at 180 and 207?°C, respectively.     

Enantioseparation of rabeprazole and omeprazole by nonaqueous capillary electrophoresis with an ephedrine-based ionic liquid as the chiral selector

An ephedrine‐based chiral ionic liquid, (+)‐N,N‐dimethylephedrinium‐bis(trifluoromethanesulfon)imidate ([DMP]⁺[Tf₂N]^‐), served as both chiral selector and background electrolyte in nonaqueous capillary electrophoresis. The enantioseparation of rabeprazole and omeprazole was achieved in acetonitrile–methanol (60:40 v/v) containing 60 mm [DMP]⁺[Tf₂N]^‐. The influences of separation conditions, including the concentration of [DMP]⁺[Tf₂N]^‐, the electrophoretic media and the buffer, on enantioseparation were evaluated. The mechanism of enantioseparation was investigated and discussed. Ion‐pair interaction and hydrogen bonding may be responsible for the main separation mechanism. Copyright © 2010 John Wiley & Sons, Ltd.     

Copper(I)-anilide complex [Na(phen)3][Cu(NPh2)2]: an intermediate in the copper-catalyzed N-arylation of N-phenylaniline

Complex [Na(phen)₃][Cu(NPh₂)₂] ( 2 ), containing a linear bis(N‐phenylanilide)copper(I) anion and a distorted octahedral tris(1,10‐phenanthroline)sodium counter cation, has been isolated from the catalytic C? N cross‐coupling reaction with the CuI/phen/tBuONa (phen=1,10‐phenanthroline) catalytic system. Complex 2 can react with 4‐iodotoluene to produce 4‐methyl‐N,N‐diphenylaniline ( 3 a ) with 70.6 % yield. In addition, 2 can work as an effective catalyst for C? N coupling under the same reaction conditions, thus indicating that 2 is the intermediate of the catalytic system. Both [Cu(NPh₂)₂]^? and [Cu(NPh₂)I]^? have been observed by in situ electron ionization mass spectrometry (ESI‐MS) under catalytic reaction conditions, thus confirming that they are intermediates in the reaction. A catalytic cycle has been proposed based on these observations. The molecular structure of 2 has been determined by single‐crystal X‐ray diffraction analysis.     

Speciation of Rare‐Earth Metal Complexes in Ionic Liquids: A Multiple‐Technique Approach

The dissolution process of metal complexes in ionic liquids was investigated by a multiple‐technique approach to reveal the solvate species of the metal in solution. The task‐specific ionic liquid betainium bis(trifluoromethylsulfonyl)imide ([Hbet][Tf₂N]) is able to dissolve stoichiometric amounts of the oxides of the rare‐earth elements. The crystal structures of the compounds [Eu₂(bet)₈(H₂O)₄][Tf₂N]₆, [Eu₂(bet)₈(H₂O)₂][Tf₂N]₆?2H₂O, and [Y₂(bet)₆(H₂O)₄][Tf₂N]₆ were found to consist of dimers. These rare‐earth complexes are well soluble in the ionic liquids [Hbet][Tf₂N] and [C₄mim][Tf₂N] (C₄mim=1‐butyl‐3‐methylimidazolium). The speciation of the metal complexes after dissolution in these ionic liquids was investigated by luminescence spectroscopy, ¹H, ¹³C, and ⁸⁹Y NMR spectroscopy, and by the synchrotron techniques EXAFS (extended X‐ray absorption fine structure) and HEXS (high‐energy X‐ray scattering). The combination of these complementary analytical techniques reveals that the cationic dimers decompose into monomers after dissolution of the complexes in the ionic liquids. Deeper insight into the solution processes of metal compounds is desirable for applications of ionic liquids in the field of electrochemistry, catalysis, and materials chemistry.     

The different modes of chiral [1,2,3]triazolo[5,1‐b][1,3,4]thiadiazines: crystal packing,conformation investigation and cellular activity

The crystal structures of four new chiral [1,2,3]triazolo[5,1‐b][1,3,4]thiadiazines are described, namely, ethyl 5′‐benzoyl‐5′H,7′H‐spiro[cyclohexane‐1,6′‐[1,2,3]triazolo[5,1‐b][1,3,4]thiadiazine]‐3′‐carboxylate, C₁₉H₂₂N₄O₃S, ethyl 5′‐(4‐methoxybenzoyl)‐5′H,7′H‐spiro[cyclohexane‐1,6′‐[1,2,3]triazolo[5,1‐b][1,3,4]thiadiazine]‐3′‐carboxylate, C₂₀H₂₄N₄O₄S, ethyl 6,6‐dimethyl‐5‐(4‐methylbenzoyl)‐6,7‐dihydro‐5H‐[1,2,3]triazolo[5,1‐b][1,3,4]thiadiazine‐3‐carboxylate, C₁₇H₂₀N₄O₃S, and ethyl 5‐benzoyl‐6‐(4‐methoxyphenyl)‐6,7‐dihydro‐5H‐[1,2,3]triazolo[5,1‐b][1,3,4]thiadiazine‐3‐carboxylate, C₂₁H₂₀N₄O₄S. The crystallographic data and cell activities of these four compounds and of the structures of three previously reported similar compounds, namely, ethyl 5′‐(4‐methylbenzoyl)‐5′H,7′H‐spiro[cyclopentane‐1,6′‐[1,2,3]triazolo[5,1‐b][1,3,4]thiadiazine]‐3′‐carboxylate, C₁₉H₂₂N₄O₃S, ethyl 5′‐(4‐methoxybenzoyl)‐5′H,7′H‐spiro[cyclopentane‐1,6′‐[1,2,3]triazolo[5,1‐b][1,3,4]thiadiazine]‐3′‐carboxylate, C₁₉H₂₂N₄O₄S, and ethyl 6‐methyl‐5‐(4‐methylbenzoyl)‐6‐phenyl‐6,7‐dihydro‐5H‐[1,2,3]triazolo[5,1‐b][1,3,4]thiadiazine‐3‐carboxylate, C₂₂H₂₂N₄O₃S, are contrasted and compared. For both crystallization and an MTT assay, racemic mixtures of the corresponding [1,2,3]triazolo[5,1‐b][1,3,4]thiadiazines were used. The main manner of molecular packing in these compounds is the organization of either enantiomeric pairs or dimers. In both cases, the formation of two three‐centre hydrogen bonds can be detected resulting from intramolecular N—H…O and intermolecular N—H…O or N—H…N interactions. Molecules of different enantiomeric forms can also form chains through N—H…O hydrogen bonds or form layers between which only weak hydrophobic contacts exist. Unlike other [1,2,3]triazolo[5,1‐b][1,3,4]thiadiazines, ethyl 5′‐benzoyl‐5′H,7′H‐spiro[cyclohexane‐1,6′‐[1,2,3]triazolo[5,1‐b][1,3,4]thiadiazine]‐3′‐carboxylate contains molecules of only the (R)‐enantiomer; moreover, the N—H group does not participate in any significant intermolecular interactions. Molecular mechanics methods (force field OPLS3e) and the DFT B3LYP/6‐31G+(d,p) method show that the compound forming enantiomeric pairs via weak N—H…N hydrogen bonds is subject to greater distortion of the geometry under the influence of the intermolecular interactions in the crystal. For intramolecular N—H…O and S…O interactions, an analysis of the noncovalent interactions (NCIs) was carried out. The cellular activities of the compounds were tested by evaluating their antiproliferative effect against two normal human cell lines and two cancer cell lines in terms of half‐maximum inhibitory concentration (IC₅₀). Some derivatives have been found to be very effective in inhibiting the growth of Hela cells at nanomolar and submicromolar concentrations with minimal cytotoxicity in relation to normal cells.     

Three novel benzothiazine‐fused triazoles as potential centrally acting muscle relaxants

The structures of the novel triazolobenzothiazines 2,4‐dihydro‐1H‐benzo[b][1,2,4]triazolo[4,3‐d][1,4]thiazin‐1‐one (IDPH‐791), C₉H₇N₃OS, (I), a potential muscle relaxant, its benzoyl derivative, 2‐(2‐oxo‐2‐phenylethyl)‐2,4‐dihydro‐1H‐benzo[b][1,2,4]triazolo[4,3‐d][1,4]thiazin‐1‐one, C₂₀H₁₇N₃O₄S, (II), and the β‐keto ester derivative, ethyl 3‐oxo‐2‐(1‐oxo‐2,4‐dihydro‐1H‐benzo[b][1,2,4]triazolo[4,3‐d][1,4]thiazin‐2‐yl)‐3‐phenylpropanoate, C₁₇H₁₃N₃O₂S, (III), are the first examples of benzothiazine‐fused triazoles in the crystallographic literature. The heterocyclic thiazine rings in all three structures adopt a distorted half‐chair conformation. Compound (III) exists in the trans‐β‐diketo form. Other than N—H...O hydrogen bonds in (I) forming dimers, no formal intermolecular hydrogen bonds are involved in the crystal packing of any of the three structures, which is dominated by C—H...O/N and π–π stacking interactions.     

Conversion of 3‐amino‐4‐arylamino‐1H‐isochromen‐1‐ones to 1‐arylisochromeno[3,4‐d][1,2,3]triazol‐5(1H)‐ones: synthesis,spectroscopic characterization and the structures of four products and one ring‐opened derivative

An efficient synthesis of 1‐arylisochromeno[3,4‐d][1,2,3]triazol‐5(1H)‐ones, involving the diazotization of 3‐amino‐4‐arylamino‐1H‐isochromen‐1‐ones in weakly acidic solution, has been developed and the spectroscopic characterization and crystal structures of four examples are reported. The molecules of 1‐phenylisochromeno[3,4‐d][1,2,3]triazol‐5(1H)‐one, C₁₅H₉N₃O₂, (I), are linked into sheets by a combination of C—H…N and C—H…O hydrogen bonds, while the structures of 1‐(2‐methylphenyl)isochromeno[3,4‐d][1,2,3]triazol‐5(1H)‐one, C₁₆H₁₁N₃O₂, (II), and 1‐(3‐chlorophenyl)isochromeno[3,4‐d][1,2,3]triazol‐5(1H)‐one, C₁₅H₈ClN₃O₂, (III), each contain just one hydrogen bond which links the molecules into simple chains, which are further linked into sheets by π‐stacking interactions in (II) but not in (III). In the structure of 1‐(4‐chlorophenyl)isochromeno[3,4‐d][1,2,3]triazol‐5(1H)‐one, (IV), isomeric with (III), a combination of C—H…O and C—H…π(arene) hydrogen bonds links the molecules into sheets. When compound (II) was exposed to a strong acid in methanol, quantitative conversion occurred to give the ring‐opened transesterification product methyl 2‐[4‐hydroxy‐1‐(2‐methylphenyl)‐1H‐1,2,3‐triazol‐5‐yl]benzoate, C₁₇H₁₅N₃O₃, (V), where the molecules are linked by paired O—H…O hydrogen bonds to form centrosymmetric dimers.     

Syntheses of N10‐substituted 7‐Arylpyrrolo[2,1‐c]‐[1,4]benzodiazepine‐5,11‐diones

Pyrrolo[2,1‐c][1,4]benzodiazepine‐5,11‐dione and its 7‐bromo derivative were alkylated at the N10 atom applying various methods. The resulting products were subjected to Suzuki–Miyaura reactions using a catalyst system consisting of Pd(Cl)₂(PPh₃)₂ and sodium tert‐butanolate in toluene. Results of an X‐ray single crystal analysis are presented.