Coordination behaviour of nicotinamide: an infrared spectroscopic study

A series of Hofmann-type complexes containing two nicotinamide(nia) molecules attached to transition metal (II) (M) tetracyanonickelate frame with the formula: M(nia)₂Ni(CN)₄ (where M=Mn, Co, Ni, Cu or Cd) have been synthesised for the first time. Metal (II) halide complexes of nicotinamide complexes of the type [M(nia)₂X₂ (M=Cd, Ni, Cu, Hg; X=Cl, Br) and Ni(nia)₄Br₂ nia=nicotinamide] have also synthesised. The FTIR spectra are reported in the 4000-400 cm⁻¹ region. Vibrational assignments are given for all the observed bands. The analysis of the vibrational spectra indicates that there are some structure-spectra correlations. A pronounced change was observed in the N-H stretching frequencies of the NH₂ group. It is proposed that the amide NH₂ group influence by the intramolecular hydrogen bond in the complexes. The coordination effect on the nicotinamide modes is analysed.     

Modification of kaolinite surfaces through mechanochemical treatment--a mid-IR and near-IR spectroscopic study

The modification of kaolinite surfaces through mechanochemical treatment has been studied using a combination of mid-IR and near-IR spectroscopy. Kaolinite hydroxyls were lost after 10 h of grinding as evidenced by the decrease in intensity of the OH stretching vibrations at 3695 and 3619 cm(-1) and the deformation modes at 937 and 915 cm(-1). Concomitantly an increase in the hydroxyl-stretching vibrations of water is observed. The mechanochemical activation (dry grinding) causes destruction in the crystal structure of kaolinite by the rupture of the O-H, Al-OH, Al-O-Si and Si-O bonds. Evidence of this destruction may be followed using near-IR spectroscopy. Two intense bands are observed in the spectral region of the first overtone of the hydroxyl-stretching vibration at 7065 and 7163 cm(-1). These two bands decrease in intensity with mechanochemical treatment and two new bands are observed at 6842 and 6978 cm(-1) assigned to the first overtone of the hydroxyl-stretching band of water. Concomitantly the water combination bands observed at 5238 and 5161 cm(-1) increase in intensity with mechanochemical treatment. The destruction of the kaolinite surface may be also followed by the loss of intensity of the two hydroxyl combination bands at 4526 and 4623 cm(-1). Infrared spectroscopy shows that the kaolinite surface has been modified by the removal of the kaolinite hydroxyls and their replacement with water adsorbed on the kaolinite surface. NIR spectroscopy enables the determination of the optimum time for grinding of the kaolinite. Further NIR allows the possibility of continual on-line analysis of the mechanochemical treatment of kaolinite.     

Fourier transform infrared spectroscopic and theoretical study of water interactions with glycine and its N-methylated derivatives

In this study we attempt to explain the molecular aspects of amino acids' hydration. Glycine and its N-methylated derivatives: N-methylglycine, N,N-dimethylglycine, and N,N,N-trimethylglycine were used as model solutes in aqueous solution, applying FT-IR spectroscopy as the experimental method. The quantitative version of the difference spectra method enabled us to obtain the solute-affected HDO spectra as probes of influenced water. The spectral results were confronted with density functional theory calculated structures of small hydration complexes of the solutes using the polarizable continuum model. It appears that the hydration of amino acids in the zwitterionic form can be understood allowing a synchronized fluctuation of hydrogen bonding between the solute and the water molecules. This effect is caused by a noncooperative interaction of water molecules with electrophilic groups of amino acid and by intramolecular hydrogen bond, allowing proton transfer from the carboxylic to the amine group, accomplishing by the chain of two to four water molecules. As a result, an instantaneous water-induced asymmetry of the carboxylate and the amino group of amino acid molecule is observed and recorded as HDO band splitting. Water molecules interacting with the carboxylate group give component bands at 2543 ± 11 and 2467 ± 15 cm(-1), whereas water molecules interacting with protons of the amine group give rise to the bands at 2611 ± 15 and 2413 ± 12 cm(-1). These hydration effects have not been recognized before and there are reasons to expect their validity for other amino acids.     

Hydration of short-chain poly(oxyethylene) in carbon tetrachloride: an infrared spectroscopic study

Hydration of short-chain poly(oxyethylene)s, CH(3)(OCH(2)CH(2))(m)OCH(3) (abbreviated as C(1)E(m)()C(1)) (m = 1-3), in carbon tetrachloride has been studied by infrared spectroscopy. The O-H stretching vibrations of water in ternary solutions with H(2)O:C(1)E(m)C(1):CCl(4) mole ratios of 0.000418:0.005:0.995 to 0.000403:0.04:0.96 were analyzed. Two types of hydrogen bonds are formed in the interaction between water and C(1)E(m)C(1) in carbon tetrachloride; one is a monodentate hydrogen bond, in which only one of the O-H bonds of a water molecule participates in hydrogen bonding, and the other is a bidentate hydrogen bond, in which both of the O-H bonds of a water molecule participate in hydrogen bonding by bridging oxygen atoms separated by two or more monomer units on the polymer chain. An important finding is that the bidentate hydrogen-bond bridge is not formed between the nearest-neighbor oxygen atoms. This experimental observation supports the results of previous molecular dynamics simulations. The shortest oligomer of poly(oxyethylene), i.e., CH(3)OCH(2)CH(2)OCH(3) (1,2-dimethoxyethane) with a single monomer unit, is suggested not to be an adequate model for this polymer with respect to hydrogen bonding to water. The hydrogen bonding in a 1:1 C(1)E(m)C(1)-water adduct in carbon tetrachloride represents primitive incipient hydration of poly(oxyethylene). The present results indicate that both monodentate and bidentate hydrogen bonds are important and the latter is destabilized more rapidly than the former with increasing temperature. This dehydration process can be a potential mechanism of the poly(oxyethylene)-water phase separation.     

Thermal analytical and infrared spectroscopic investigations on polymorphic organic compounds-II

At room temperature, three of the six polymorphic compounds described are not present in their highest melting-point form, owing to enantiotropy. These three are triphenyltin chloride (3 modifications), 1-(4,4-dimethyl-2-oxo-3-tetrahydrofuryl)thiourea (4 modifications), and 2-aminoethyl diphenylborinate (3 modifications). In the case of 4-amino-1-(2-phenylethyl)-1,2,4-triazoline-5-thione, in addition to the absolutely stable modificationI, a further six unstable crystal forms have been observed. The three modifications of,-dimethyl-[1,1-biphenyl]-4-methanol are also monotropic in character. 2,9-Dimethyl-1,10-phenanthroline, the three polymorphic forms of which are unstable, is a special case, since it absorbs water from the air and changes into a semi-hydrate.     

Thermal analytical and infrared spectroscopic investigations on polymorphic organic compounds-III

Six polymorphic compounds, having between two and five modifications, are described. Enantiotropic modifications were found for three of them: 9-fluorenylmethanol (2 modifications), polyester red A (3 modifications) and polyester red B (3 modifications). There were no indications of enantiotropy in the other three: diphenylcarbamoyl chloride (4 modifications), 4-hydroxyphenylacetic acid (5 modifications) and 2-hydroxy-1-naphthalenecarbaldehyde (5 modifications).     

Interaction of cinnamic acid derivatives with serum albumins: a fluorescence spectroscopic study

Cinnamic acid (CA) derivatives are known to possess broad therapeutic applications including anti-tumor activity. The present study was designed to determine the underlying mechanism and thermodynamic parameters for the binding of two CA based intramolecular charge transfer (ICT) fluorescent probes, namely, 4-(dimethylamino) cinnamic acid (DMACA) and trans-ethyl p-(dimethylamino) cinnamate (EDAC), with albumins by fluorescence spectroscopy. Stern-Volmer analysis of the tryptophan fluorescence quenching data in presence of the added ligand reveals fluorescence quenching constant (κ(q)), Stern-Volmer constant (K(SV)) and also the ligand-protein association constant (K(a)). The thermodynamic parameters like enthalpy (ΔH) and entropy (ΔS) change corresponding to the ligand binding process were also estimated. The results show that the ligands bind into the sub-domain IIA of the proteins in 1:1 stoichiometry with an apparent binding constant value in the range of 10(4) dm(3) mol(-1). In both the cases, the spontaneous ligand binding to the proteins occur through entropy driven mechanism, although the interaction of DMACA is relatively stronger in comparison with EDAC. The temperature dependence of the binding constant indicates the induced change in protein secondary structure.     

Interaction of hydrogen with surfaces of silicates: single crystal vs. amorphous

We have studied how the formation of molecular hydrogen on silicates at low temperature is influenced by surface morphology. At low temperature (<30 K), the formation of molecular hydrogen occurs chiefly through weak physical adsorption processes. Morphology then plays a role in facilitating or hindering the formation of molecular hydrogen. We studied the formation of molecular hydrogen on a single crystal forsterite and on thin films of amorphous silicate of general composition (Fe(x)Mg((x-1)))(2)SiO(4), 0 < x < 1. The samples were studied ex situ by Atom Force Microscopy (AFM), and in situ using Thermal Programmed Desorption (TPD). The data were analysed using a rate equation model. The main outcome of the experiments is that TPD features of HD desorbing from an amorphous silicate after its formation are much wider than the ones from a single crystal; correspondingly typical energy barriers for diffusion and desorption of H, H(2) are larger as well. The results of our model can be used in chemical evolution codes of space environments, where both amorphous and crystalline silicates have been detected.     

An exploration of the surfaces of some Pt/SiO2 catalysts using CO as an infrared spectroscopic probe

Infrared spectra in the bond-stretching, ν CO, region have been measured for CO adsorbed on an impregnated Pt/SiO₂ catalyst (16% Pt) with the aim of characterizing the adsorption sites present. This catalyst has previously been widely used for the study of the spectra from adsorbed hydrocarbons. It has relatively large metal particles, typically in the diameter range of 5 to 15 nm. Samples were studied which were hydrogen-covered, hydrogen-depleted, oxygen-covered and “mature”, the latter in the sense that the catalyst had undergone a number of repeated adsorption/desorption/re-reduction cycles. The spectra were interpreted in terms of the adsorption sites available by using recent correlations between ν CO wavenumbers and different patterns of CO metal interactions in metal clusters of structures known from X-ray crystallography.The strongest ν CO absorptions were from linearly adsorbed OCPt species, but these were relatively uninformative (maxima in the region 2087 to 2084 cm⁻¹ in all cases at saturation coverage) because strong dipolar coupling causes intensity-distortion and the merging-together of absorptions from different types of sites. Small proportions of sites, probably of an atomically rough nature from curved areas of the crystallites, gave weaker absorptions near 2050 and 2030 cm⁻¹. On the oxygen-covered surface a sharp absorption at 2099 cm⁻¹ denoted CO adsorption adjacent to sites of adsorbed oxygen.The weaker absorption bands in the ν CO bridged region were more informative. The strongest, near 1850 cm⁻¹ was correlated with 2-fold bridged species adsorbed on (111) surfaces. Weaker, overlapping features near 1880 and 1795 cm⁻¹ (separated from an overall contour with the aid of computer analysis) were correlated, respectively with 2-fold bridged species on (100) or (110) planes, and 3-fold bridged species on (111) planes. Weaker absorptions near 1700 cm⁻¹ were considered to correspond to different types of adsorption sites involving unequal interactions of CO with at least two metal atoms.The “mature” Pt/SiO₂ samples gave notably different spectra in both regions and this was tentatively attributed to the effect of residual carbon atoms on or near the Pt surface.A comparison was made of the present spectra with those previously published from similar experiments on a small-particle (ca 2 nm) Pt/SiO₂ catalyst, EUROPT-1. The spectral differences could be well accounted for in terms of the reported raft-like (111)-based morphology of the small metal particles of the EUROPT-1 catalyst.     

Cu(II)-intercalated muscovite: An infrared spectroscopic study

Diffuse reflectance infrared spectroscopy (DRIFT) has proved to be a useful tool for the investigation of migration paths of intercalated metal cations within the layered structure of phyllosilicates like muscovite. While the fixation of small cations like lithium or copper in clay minerals and their migration paths have been studied extensively, they never have been reported for muscovite. Therefore, the aim of this study was to investigate the effects of a treatment with a supersaturated Cu-nitrate solution on the structure of muscovite. Additional X-ray diffractometric (XRD) data showed the formation of new d(0 0 l) and d(0 0 2) peaks, and thus proved that the new cations already were intercalated into the muscovite interlayers, although the concentration of the original interlayer cation potassium was nearly not affected. This suggested the simultaneous occurrence of both potassium and copper in the interlayers, resulting in an expansion along the c-axis and in a decrease of the a and b parameters. The spectroscopic investigations proved a migration of the cations deep into the tetrahedral sheets. As all bands which can be assigned to vibrations of the octahedral sheet (e.g. at 713 or 903 cm⁻¹) were strongly affected by the treatment, a fixation of Cu close to the OH-groups of the octahedral sheets was suggested.     

Lanthanum trilactate: Vibrational spectroscopic study − infrared/Raman spectroscopy

In this study lanthanum trilactate was prepared by neutralization reaction of lactic acid and lanthanum oxide, purified and identified by X-ray powder diffraction. Infrared spectra (Mid-IR region 4000–650 cm⁻¹) and Raman spectra (Stokes region 4000–100 cm⁻¹) of the high quality crystalline samples have been recorded and presented for the first time. For comparison DFT calculations were performed using Gaussian 09 D.01 and agreement between predicted and measured spectral data has been achieved. Acquired information can be utilized for substance identification for example in various industrial applications or in biological systems.     

Reaction of vinyl radical with oxygen: a matrix isolation infrared spectroscopic and theoretical study

The reaction of vinyl radical with molecular oxygen in solid argon has been studied using matrix isolation infrared absorption spectroscopy. The vinyl radical was produced through high frequency discharge of ethylene. The vinyl radical reacted with oxygen spontaneously on annealing to form the vinylperoxy radical C(2)H(3)OO with the O-O bond in a trans position relative to the C-C bond, which is characterized by O-O stretching and out-of-plane CH(2) bending vibrations at 1140.7 and 875.5 cm(-1). The vinylperoxy radical underwent visible photon-induced dissociation to the CH(2)OH(CO) complex or CH(2)OH+CO, which has never been considered in previous studies. The CH(2)OH(CO) product was predicted to be more thermodynamically accessible than the previously reported major HCO+H(2)CO channel, and is most likely produced by hydrogen atom transfer from the first-formed H(2)CO-HCO pair in solid argon.     

Adsorption of 2-chloropyridine on oxides--an infrared spectroscopic study

The adsorption of 2-chloropyridine on SiO(2), TiO(2), ZrO(2), SiO(2)-Al(2)O(3) and H-mordenite has been studied by IR spectroscopy. The different modes of interaction with oxide surfaces, i.e. hydrogen-bonding and adsorption at Br?nsted or Lewis acid sites, was modelled by ab initio calculations at the B3LYP/DZ+(d) level. Adsorption on SiO(2) results in hydrogen bonding to surface hydroxyl groups, whereas the spectra obtained following adsorption on TiO(2) and ZrO(2) display evidence for electron transfer at Lewis acidic surface sites. Protonation of 2-chloropyridine at Br?nsted acidic sites was detected only for adsorption on SiO(2)-Al(2)O(3) and H-mordenite, indicating the presence of Br?nsted acidic sites on these oxide surfaces with pK(a) values 相似文献   

A thermogravimetric and infrared emission spectroscopic study of alunite

Thermogravimetric and differential thermogravimetric analysis has been used to characterize alunite of formula [K₂(Al³⁺)₆(SO₄)₄(OH)₁₂]. Thermal decomposition occurs in a series of steps (a) dehydration up to 225°C, (b) well defined dehydroxylation at 520°C and desulphation which takes place as a series of steps at 649, 685 and 744°C.The alunite minerals were further characterized by infrared emission spectroscopy (IES). Well defined hydroxyl stretching bands at around 3463 and 3449 cm^?1 are observed. At 550°C all intensity in these bands is lost in harmony with the thermal analysis results. OH stretching bands give calculated hydrogen bond distances of 2.90 and 2.84–7 Å. These hydrogen bond distances increase with increasing temperature. Characteristic (SO₄)^2? stretching modes are observed at 1029.5, 1086 and 1170 cm^?1. These bands shift to lower wavenumbers on thermal treatment. The intensity in these bands is lost by 550°C.     

The dehydroxylation of basic aluminum sulfate: An infrared emission spectroscopic study

The tridecameric aluminum polymer [AlO₄Al₁₂(OH)₂₄(H₂O)₁₂]⁷⁺ was prepared by forced hydrolysis of Al³⁺ up to an OH/Al molar ratio of 2.2. Upon addition of sulfate, the tridecamer crystallized as the monoclinic basic aluminum sulfate Na_0.1[AlO₄Al₁₂(OH)₂₄(H₂O)₁₂](SO₄)_3.55. The dehydroxylation of the basic aluminum sulfate has been studied by Fourier transform in-situ infrared emission spectroscopy over a temperature range of 200° to 750°C at 50°C intervals. The spectrum is characterized by the sulfate ν₁ (1024 cm⁻¹), ν₃ doublet (1117 and 1168 cm⁻¹) and the ν₄ doublet (568 and 611 cm⁻¹) modes. Furthermore, minor bands assigned to nitrate are observed. Upon heating from ≈350° to 400°C major changes are observed, especially in the bandwidth and band intensities. The bands in the hydroxyl stretching region due to the Al₁₃ group disappear, whereas the bands around 1050 cm⁻¹ display various changes in bandwidths, intensities and positions associated with the dehydration and dehydroxylation of the basic sulfate and the changing of the structure into an aluminum oxosulfate. The nitrate bands diminish upon heating.     

Thermal analytical and infrared spectroscopic investigations on polymorphic organic compounds—V

All the polymorphic compounds described are enantiotropic, so that in four cases, order-disorder or rotational transformation can be deduced on the basis of the relationships between enthalpy of transformation and enthalpy of fusion. The following compounds are of this type: (±)-1-azabicyclo- [2.2.2]-octan-3-ol (4 modifications), 5-norbornene-2,3-dicarboxylic anhydride (3 modifications), (l.R)-(–)-camphorquinone (3 modifications) and 2-bromoethylamine hydrobromide (3 modifications). For tris(acetylacetonato)aluminium(III) (3 modifications) and 2-(4-aminophenyl)-6-methylbenzothiazole (5 modifications), another type of transformation must be assumed.     

Thermal analytical and infrared spectroscopic investigations on polymorphic organic compounds—VII

For four of the polymorphic compounds described, the commercial product does not consist of the form with the highest melting point. A spontaneous enantiotropic transformation is observed for 2-benzoxazolethiol (three modifications). For 2-furancarboxylic acid (three modifications) and 4-methoxy-3-nitrobenzaldehyde (three modifications), the form with the lower melting point either melts inhomogeneously with crystallization of modificationI, or homogeneously without formation of the highest melting form. Monotropy is observed for 2-nitrophenylacetic acid (four modifications) and salicylic acid hydrazide (four modifications). A special case is 1,2,4-triazole-3-thiol (three modifications) which in the commercial product occurs mainly as the metastable modificationIII, which is monotropic, whereas there is enantiotropy between modificationsI andII.     

Changes in the surfaces of adsorbed p-nitrophenol on methyltrioctadecylammonium bromide organoclay--an XRD, TG, and infrared spectroscopic study

Water purification is of extreme importance worldwide. p-Nitrophenol was used as a test chemical to design and test an organoclay for the removal of p-nitrophenol from an aqueous solution. Synthesis of the organoclay with methyltrioctadecylammonium bromide [CH(3)(CH(2))(17)](3)NBr(CH(3)) labeled as MTOAB results in multiple expansions of the montmorillonite clay from 1.24 nm to a maximum of 5.20 nm as is evidenced by the XRD patterns. Thermal analysis shows strong bonding of the surfactant to the clay siloxane layers and the interaction of the p-nitrophenol with the clay surfaces. It is proposed that the p-nitrophenol penetrates the siloxane layer of the clay and bonds through the ditrigonal space of the siloxane hexagonal units to the inner OH units. Such a concept is supported by the observation of an additional infrared band at 3652 cm(-1) for the organoclay. Shifts in the p-nitrophenol OH stretching vibrations mean a strong interaction of the p-nitrophenol molecule. Significant changes in the siloxane stretching bands are also observed.     

Thermal analytical and infrared spectroscopic investigations on polymorphic organic compounds—VIII

Five polymorphic organic compounds which exhibited from three to seven modifications were examined. Because of enantiotropy, the commercial forms of three of the compounds did not consist of the modification with the highest melting point: These were 4-hydroxy-3,5-dimethoxybenzoic acid (4 modifications), 3-pyridylacetic acid (4 modifications) and 2,4,5-triaminopyrimidine (4 modifications). In contrast, 2-amino-2-cyanoacetamide (3 modifications) and [([(4-methylphenyl)sulphonyl]oxy)imino]propanedinitrile (7 modifications) were present in the highest melting form in the commercial products. A further 32 compounds (most of which had only two modifications) were examined and are reported without detailed results; six of them were enantiotropic.