A bisferrocene-benzobisimidazole triad as a multichannel ditopic receptor for selective sensing of hydrogen sulfate and mercury ions

The bisferrocene-benzobisimidazole triad behaves as a selective redox and fluorescent chemosensor for HSO(4)(-) and Hg(2+) ions, exhibiting an easily detectable signal change in both the redox potential of the ferrocene/ferrocinium redox couple and in the emission band which is red-shifted (Δλ = 10-13 nm) and enhanced in intensity (Chelation Enhanced Fluorescence, CHEF = 486-225) upon complexation with these ions, in EtOH solutions.     

An anthracene based bispyridinium amide receptor for selective sensing of anions

A new receptor has been designed and synthesized for selective recognition of anions through hydrogen bonding and electrostatic interactions. The recognition ability has been studied by fluorescence, UV-vis and ¹H NMR spectroscopic methods. The results demonstrate that the receptor exhibits good recognition ability towards anions and shows strong binding to AcO⁻, and F⁻.     

Interaction between biphenols and anions: selective receptor for dihydrogenphosphate

Biphenol was shown to bind dihydrogenphosphate (H2PO4-) selectively over various other anions (MeCO2-, Cl-, Br-, I-, NO3-, HSO4-). The highly selectivity of biphenol toward dihydrogenphosphate is explained in terms of the basicity and shape of the guest anion.     

A bis-salicylaldoximato-copper(II) receptor for selective sulfate uptake

The preferential uptake of sulfate over the industrially important anions, chloride and nitrate and structurally similar dihydrogen phosphate has been achieved in aqueous media with a dicopper salicylaldoxime complex.     

A BODIPY derivative as a highly selective "Off-On" fluorescent chemosensor for hydrogen sulfate anion

A new fluorescent receptor for anions has been synthesized by the combination of BODIPY dye and indole moiety. The binding and sensing abilities of receptor toward various anions have been studied by absorption, emission and (1)H NMR titrations spectroscopies. Receptor could act as a highly selective "Off-On" fluorescent sensor for hydrogen sulfate anion in CH(3)CN solvent and CH(3)CN-H(2)O medium. The fluorescence response of receptor toward HSO(4)(-) in CH(3)CN solvent could be due to the suppressed PET (photo-induced electron transfer) process induced by the multiple hydrogen bonding interactions between receptor and HSO(4)(-). In CH(3)CN-H(2)O medium, the HSO(4)(-)-induced change is mainly the consequence of a simple protonation of the CH[double bond, length as m-dash]N- moiety of receptor , which inhibited the PET process and "turned on" the fluorescence of .     

A highly selective fluorescent sensor for distinguishing cadmium from zinc ions based on a quinoline platform

A fluorescent sensor, N-(quinolin-8-yl)-2-(quinolin-8-yloxy)acetamide (HL), based on 8-aminoquinoline and 8-hydroxyquinoline platforms has been synthesized. This sensor displays high selectivity and sensitive fluorescence enhancement to Cd(2+) in ethanol. Moreover, sensor HL can distinguish Cd(2+) from Zn(2+) via two different sensing mechanisms (photoinduced electron transfer for Cd(2+); internal charge transfer for Zn(2+)). The composition of the complex Cd(2+)/HL or Zn(2+)/L(-) has been found to be 1:1, based on the fluorescence/absorption titration and further confirmed by X-ray crystallography.     

A di-palladium urea complex as a molecular receptor for anions

A new di-nuclear palladium complex containing thiol-urea ligands has been prepared, structurally characterized and its interaction with anionic species studied in solution.     

A chelation enhanced selective fluorescence sensing of Hg2+ by a simple quinoline substituted tripodal amide receptor

Two tris(2-aminoethyl)amine (tren) based tripodal amide fluoroionophores, 1 and 2, functionalized with quinoline (chelating fluorophore) and naphthalene (non-chelating fluorophore) respectively, are synthesized in good yields. Fluoroionophore 1 shows a selective UV-Vis spectral shift in the case of Hg(2+) in acetonitrile among different metal ions like Li(+), Na(+), Ca(2+), Mg(2+), Cr(2+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Hg(2+), Pb(2+), and Ag(+). On the other hand, fluoroionophore 2 shows no selectivity towards any of the above metal ions in the UV-Vis study. Furthermore, 1 shows a selective chelation induced fluorescence enhancement in the presence of Hg(2+) whereas 2 shows the enhancement of fluorescence with most of the metal ions via a photoinduced charge transfer mechanism. The naked eye detection of Hg(2+) in an acetonitrile solution of 1 shows a greenish fluorescence upon UV light irradiation. The isolated Hg(2+) complex of 1, 3, shows a similar UV-Vis and fluorescence spectral output as observed from in situ spectroscopic studies of 1 in the presence of Hg(2+). Infra-red (IR) and (1)H- NMR studies also reveal the interaction of Hg(2+) with the quinoline nitrogen atoms as well as with the amide functionality.     

From atomic to molecular anions: a neutral receptor captures cyanide using strong C-H hydrogen bonds

The multifaceted character of cyanide as an acceptor of hydrogen bonds from a receptor has been examined for the first time using electronic-structure theory and spectroscopic measurements (UV/Vis and NMR titrations). Motivated by the similar size and charge of the cyanide pseudohalide and the monoatomic chloride ion, strong interactions of cyanide with a rigid macrocyclic triazolophane receptor have been predicted by theory and confirmed by experimental findings. It was found that both anions bind with similar strength in the gas phase (computed) and in the solution phase (experimental) via C-H hydrogen bonds. Theoretical calculations predict that the heterodiatomic cyanide prefers to bind in the plane of the macrocycle along the north-south axis. Examination of the possible binding modes reveal low computed barriers for in-plane rotation. The predicted model is consistent with the experimental data. Overall, the binding of a molecular anion within the cavity of a triazolophane receptor has been characterized where the computed and experimental binding energies are consistent with the classification of cyanide as a pseudohalide in the context of supramolecular chemistry.     

A selective chromogenic molecular sensor for acetate anions in a mixed acetonitrile-water medium

Quinonehydrazone compound , as a new chromogenic anion sensor, can selectively detect AcO(-) over F(-) and other anions in mixed acetonitrile-water media. The deprotonation of the N-H proton of the sensor is responsible for the drastic color change. An acidic C-H group in the receptor, probably acting as an accessorial binding site, is essential to the selectivity and affinity for sensing the acetate anions.     

Highly selective silver nanoparticles based label free colorimetric sensor for nitrite anions

Highly selective label free colorimetric sensor based on AgNPs stabilized by phenolic chelating ligand, N,N′-bis(2-hydroxybenzyl)-1,2-diaminobenzene (1), for NO₂⁻ anions has been developed. Addition of NO₂⁻ showed selective decolourisation of brownish yellow colour of 1-AgNPs with the detection limit of 10⁻⁷ M. Absorption studies showed the complete disappearance of 1-AgNPs peak at 426 nm due to the conversion of AgNPs to silver ions. The presence silver ions were confirmed by white precipitates of AgCl formation with NaCl. The interference studies confirmed the high selectivity of NO₂⁻ sensing in presence of anions as well as cations by 1-AgNPs. A linear relationship was observed between the change of absorption and concentration of NO₂⁻. The present approach could be performed at room temperature and ambient conditions. The practical applications of 1-AgNPs for selective sensing of NO₂⁻ in different water samples such as ground, river, pond and tap water have also been demonstrated.     

Non-conventional hydrogen bonds: pterins-metal anions

In this paper, we present an analysis of the interaction of metal ions (Cu, Ag and Au) with three different pterins (pterin, isoxanthopterin and sepiapterin) to provide insights concerning the formation of conventional and non-conventional H bonds. Density functional theory calculations were performed in order to reveal the optimized structures of pterin molecules, dimers and tetramers compounds, both with and without metal anions (M). The interaction with small metal clusters (M(3)) is also considered. The formation of different systems is characterized in terms of the structural parameters and hydrogen binding energies (HBE). The HBE values for pterin-M systems presented in this study lie between 22 and 60 kcal mol(-1) and can therefore be classified as strong conventional and strong non-conventional hydrogen bonds. The HBE with small metal clusters (pterin-M(3)) are smaller than the HBE with metal atoms. Vertical electron detachment energies (VEDEs) are also reported in order to analyze the influence of the hydrogen bond on electronic properties. A direct correlation between VEDEs and HBE was found for pterin-M and pterin-M(3) complexes; i.e. as the VEDEs increase, the HBE also augment. The only exception is with Ag(3). The main conclusion derived from this study is that the strong non-conventional hydrogen bonds formed between pterins, dimers and tetramers do not affect the formation of conventional hydrogen bonds between pterins but they do influence the VEDEs.     

A fluorescence enhancement-based sensor for hydrogen sulfate ion

Sugar-aza-crown ether-based cavitand 1 can act as a selective turn-on fluorescence sensor for hydrogen sulfate ion in methanol among a series of tested anions. Spectroscopic studies, particularly NMR spectroscopy, revealed that the C-H hydrogen bonding between 1,2,3-triazole ring of cavitand 1 and hydrogen sulfate ion is crucial for the high selectivity of the receptor for hydrogen sulfate.     

Binding of molecular hydrogen to halide anions: A computational exploration of eco-friendly materials for hydrogen storage

Using density functional theory calculations, we investigate the structures of the complexes derived from the interaction of molecular hydrogen to halide anions. The bromide anion can bind up to seven hydrogen molecules while both fluoride and chloride anions form stable complexes with up to six hydrogen molecules. According to the results of QTAIM analyses, closed shell interactions are operative in these complexes.     

Macrocyclic bis-urea receptor: Synthesis,crystal structure and phosphate binding properties

A macrocyclic bis-urea receptor (L1) and two acyclic bis-urea analogues (L2 and L3) have been synthesized. The crystal structure of L1 was obtained. The experimental results show that the receptor L1 has high selectivity to H₂PO₄^?. Meanwhile, compared with the acyclic receptors L2 and L3, L1 has higher binding ability to H₂PO₄^?. The results of density functional theory (DFT) calculations deepened our understanding on L1 conformations stability and its anion-binding property.     

Norharmane: old yet highly selective dual channel ratiometric fluoride and hydrogen sulfate ion sensor

Norharmane provides a simple unexplored class of anion receptor, that allows for the ratiometric selective detection of F(-) and HSO(4)(-) ions. The presence of a strong base can easily form hydrogen bonds with the acidic hydrogen bond donor moiety and the relatively strong acid can easily protonate the basic hydrogen bond acceptor moiety, which can modulate the optical response and can detect the anions efficiently with high selectivity. In view of that, it is promising to conceive the use of these systems in various sensing applications as well as in other situations, such as anion transport and purification, where the availability of cheap and easy-to-make anion receptors, would be advantageous.     

A ferrocenyl-guanidine derivative as a highly selective electrochemical and colorimetric chemosensor molecule for acetate anions

A highly preorganized chemosensor molecule 1 based on a ferrocenyl-guanidine decorated with a chromogenic aryl azo moiety recognizes the acetate anion in acetonitrile solution. At first, receptor 1 underwent two-step oxidation events. Initially, oxidation of 1 occurs at the Fe(II) centre (E(p) = 440 mV) to form a ferrocenium species, followed by fast electron transfer from the guanidine moiety of the receptor to the Fe(III) centre with concomitant generation of an Fe(II) species with a radical cation centred at the nitrogen atom. In the second step, the radical cation species formed should undergo electrochemical oxidation at higher potential (E(p) = 830 mV). This assumption is supported by spectroelectrochemical studies. A remarkable cathodic shift (182 mV) of the ferrocene/ferrocenium oxidation peak (E(p) = 440 mV) and a progressive red-shift (Δλ = 30 nm) of the low energy band are observed in its absorption spectrum upon complexation of receptor 1 with the acetate anion. This change in the absorption spectrum is accompanied by a colour change from yellow to orange, which can be used for the "naked-eye" detection of this anion. Its monoprotonated form is able to selectively sense the less basic Cl(-), Br(-), NO(3)(-), and HSO(4)(-) anions: the oxidation redox peak at E(p) = 865 mV is cathodically shifted (107-182 mV).     

A fluorescent chemosensor for fluoride anions based on a hemicyanine dye

A hemicyanine dye with imidazole as the acceptor was designed and prepared as a chemosensor for fluoride anions. The experimental results demonstrated that it is a fluorometric probe for fluoride anion with good sensitivity and high selectivity. This probe showed obvious changes in UV–Vis absorption and fluorescence spectra in the presence of fluoride anions, which are attributed to the deprotonation of N–H on the imidazole moiety with fluoride anions.