Effect of Chemical Treatment and Fiber Loading on Mechanical Properties of Borassus (Toddy Palm) Fiber/Epoxy Composites

The aim of the present study was to investigate and compare the mechanical properties of untreated and chemically modified Borassus fiber–reinforced epoxy composites. Composites were prepared by the hand lay-up process by reinforcing Borassus fibers with epoxy matrix. To improve the fiber-matrix adhesion properties, alkali (NaOH) and alkali combined with silane (3-aminopropyltriethoxysilane) treatment of the fiber surface was carried out. Examinations through Fourier transform-infrared spectroscopy and scanning electron microscopy (SEM) were conducted to investigate the structural and physical properties of the Borassus fibers. Tensile properties such as modulus and strength of the composites made with chemically modified and untreated Borassus fibers were studied using a universal testing machine. Based on the experimental results, it was found that the tensile properties of the Borassus-reinforced epoxy composites were significantly improved as compared with the neat epoxy. It was also found that the fiber treated with a combination of alkali and silane exhibited superior mechanical properties to alkali-treated and untreated fiber composites. The nature of the fiber/matrix interface was examined through SEM of cryo-fractured samples. Chemical resistance of composites was also found to be improved with chemically modified fiber composites.     

The research on the mechanical properties improvement of HDPE/ABS blends reinforced with acid‐treated wood fiber

In this study, the effect of acid‐treated wood fiber modifications on the mechanical behaviors of HDPE/ABS blend is investigated. Wood fiber/HDPE/ABS composites were fabricated by incorporating acid‐treated wood fiber into HDPE/ABS blends. The results showed that both the tensile strength and flexural strength of wood fiber/HDPE/ABS composites were greater than those of HDPE/ABS blend, regardless of wood fiber modification. The results also showed that the impact strength of HDPE/ABS composites is improved by the addition of wood fiber. Scanning electron microscopic (SEM) examination of fractured surfaces showed that the improvement in the mechanical properties of the wood fiber/HDPE/ABS composites was attributed to the improved dispersion of wood fiber in the HDPE/ABS and the better interfacial characteristics caused by the acid treatment of the wood fiber.     

MECHANICAL PROPERTIES OF SMC WHISKER REINFORCED HIGH DENSITY POLYETHYLENE COMPOSITES

A new type of SiO_2-MgO-CaO (SMC) whisker was used to modify high density polyethylene (HDPE).The melting behavior and crystallinity were investigated by differential scanning calorimetry (DSC).The dispersion of whiskers and interfacial adhesion in the prepared HDPE/SMC whisker composites were investigated by scanning electron microscopy (SEM).The mechanical properties were evaluated by mechanical tests and dynamic mechanical analysis (DMA).DSC data indicated that the melting temperature and the crystall...     

Influence of chitosan on the mechanical and biological properties of HDPE for biomedical applications

High density polyethylene (HDPE) is widely used in biomedical field, except when strong cell-material interactions and high mechanical properties are required. To address this pitfall, two kinds of chitosan in different amounts were used as filler in the present research. Composites were prepared by melt extrusion process and their microstructural, thermal and mechanical properties were widely investigated. Also roughness and wettability were studied, as features of paramount importance in dictating cell response.Both types of chitosan endowed HDPE with higher Young modulus and lower elongation at break. Interestingly, fibroblast adhesion and viability were enhanced when a low amount of filler was used. The interaction of HDPE/chitosan composites with biological environment was investigated for the first time in order to assess the feasibility of these composites as materials for biomedical application.     

Mechanical characterization of polymethyl methacrylate composites reinforced with surface-coated carbon fibers

Using trihydroxy polyether polyol (PPG), diphenylmethane diisocyanate (MDI) as soft segment and hard segment, carbon fiber (CF) as reinforcement, and self-crosslinking CF/polymethyl methacrylate (PMMA) composite was prepared by prepolymer method. In this study, starch and octanoyl chloride were esterified to obtain esterified starch (SE). The fiber is then melt blended with PMMA matrix to prepare PMMA composite. Fourier-transform infrared spectroscopy (FTIR) and SEM were used to analyze and characterize the composites produced. The results show that the composite material was prepared by separately modifying the fiber with NaOH and SE, respectively. The mechanical properties of the composite materials prepared by the modified fiber are improved, and the fiber and the PMMA matrix showed better compatibility. The mechanism of comodified fiber enhanced the mechanical properties of its composites.     

Basalt fibre-reinforced high density polyethylene composite development using the twin screw extrusion process

Offshore renewable energy can lead the way towards sustainable energy harvesting and support the achievement of the CO2 reduction target by 2030. To achieve this goal it is necessary to decrease the manufacturing and deployment cost of the offshore devices. This paper focusses on the mechanical, chemical and microstructural assessment of a novel high density polyethylene (HDPE) reinforced with short basalt fibres for potential application as a hull material for wave energy devices. The choice of short fibres ensures the new composite can utilise existing low cost manufacturing methods for HDPE structures. In particular this study compares the properties of material with a recycled HDPE matrix with the properties of a material using a virgin HDPE matrix. The mechanical properties achieved by the novel composites exceed an improvement of ~300% in the properties of the monolithic polymer hence indicating the potential of this material, both for recycled and virgin HDPE. Furthermore, exploration in detail of the interaction fibres/matrix indicated the dynamic reaction between coupling agent and polymeric matrix showing the formation of molecular bonding perpendicular to the fibres, hence enhancing a 3D network that further increases the reinforcement abilities of the fibres.     

A new method to study the fiber-matrix interface in unidirectional composite materials: Application for carbon fiber-epoxy composites

Numerous studies have been done on the nature of the fiber-matrix interface and on the role of this interface in mechanical properties of epoxy-carbon fiber composite materials. In this study, we describe a new test to study the fiber-matrix interface in unidirectional composites by dynamic shear testing along the fiber axis. This method, based on three scans with increased dynamic displacement amplitude, enables us to study the recovery of mechanical properties and appearance of damage in the material. For carbon fiber-epoxy unidirectional composite materials, it is possible to distinguish two ranges in the amplitude of dynamic displacement: a first for which a recovery for G′ and tan σ is observed and a second for which permanent damage appears. The influences of fiber surface treatments such as oxidation and/or sizing on dynamic behavior are clearly displayed by this test.     

Study on insulating thermal conductive BN/HDPE composites

Thermal conductivity of boron nitride (BN) reinforced high density polyethylene (HDPE) composites was investigated under a special dispersion state of BN particles in HDPE, i.e., BN particles surrounding HDPE matrix particles. The results indicated that the special dispersion of BN in matrix gives the composites high thermal conductivity at low filler content; moreover, the smaller BN particles can more easily form conductive chains of filler compared to the larger filler particles. Examining the dependence of electrical insulation and mechanical properties of the composites on BN content demonstrated that the reinforced composites containing 30% by volume of filler has good electrical insulation and mechanical properties.     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

橡胶木粉填充LLDPE复合材料的结构和力学性能

用橡胶木粉填充线性低密度聚乙烯(LLDPE),研究了酸、碱溶液预处理木粉的效果和硅烷偶联荆(KH-570)、MMA接枝的天然橡胶胶乳(MGL-30)两种改性剂对橡胶木粉表面改性的效果,以及未粉粒径和填充量等对木粉／LLDPE复合材料力学性能的影响,并用SEM对复合材料拉伸断面的形态结构进行了分析。结果表明：木粉的拉径、木粉填充量和改性荆用量对复合材料的力学性能有较大的影响,经碱溶液预处理再用改性荆改性后的木粉能有效地改善木粉与LLDPE的界面粘结强度,提高橡胶木粉／LLDPE复合材料的力学性能。     

The effect of surface coating of CNTs on the mechanical properties of CF‐filled HDPE composites

Mechanical properties of carbon fiber (CF) and carbon nanotube (CNT)‐filled thermoplastic high‐density polyethylene (HDPE) composites were studied with particular interest on the effects of filler content and fiber surface treatment by coupling agent. Surface‐treated CF‐filled HDPE composites increased their tensile strength and impact strength, which is further increased with the addition of CNT. SEM showed that CNT‐coating‐treated CF‐HDPE composites show better dispersion of the filler into the matrix, which results in better interfacial adhesion between the filler and the matrix. Copyright © 2014 John Wiley & Sons, Ltd.     

表面改性对VGCF分散性质的影响

针对气相生长碳纤维极易团聚及与树脂基体界面结合能力较差的难题,采用双氧水-浓硝酸二步法对VGCF进行表面改性处理。利用X射线衍射仪、热重分析仪、傅立叶红外光谱仪、紫外可见分光光度计等测试分析了改性前后VGCF的表面结构和在溶剂中的分散性,并以形状记忆聚氨酯为基体,采用溶液混合法制备了气相生长碳纤维/形状记忆聚氨酯的复合材料,测试了复合材料的力学性能。经过改性后,VGCF的石墨晶型结构几乎没有改变,VGCF表面的含氧官能团浓度得到较大提高,且其在有机溶剂中的分散性及分散稳定性也得到很大提高;在气相生长碳纤维/形状记忆聚氨酯的复合材料截面中,扫描电镜观察表明表面改性使得VGCF在基体中的分散性及与基体的界面结合能力都得到一定程度的提高;经二步法改性处理后的气相生长碳纤维比未处理气相生长碳纤维对复合材料的力学性能的增强效果更为明显。     

Enhanced mechanical properties of carbon fiber composites by grafting different structural poly(amido amine) onto fiber surface

The mechanical properties of carbon fiber composites depend on the interfacial strength between fiber and epoxy matrix. Different poly (amido amine) (PAMAM) dendrimers were grafted onto carbon fiber to improve the interfacial strength of the resulting composites. Functional groups on the carbon fiber surface were examined by X-ray photoelectron spectroscopy. The surface morphology of the resulting materials was characterized by scanning electron microscopy and atomic force microscope. The characterization results revealed that PAMAM dendrimers were chemically grafted onto the surface of carbon fiber. More importantly, the mechanical properties of the resulting composites were enhanced owing to the presence of sufficient functional groups on the carbon fiber surface. In addition, after PAMAM containing chair conformations were grafted, the interlaminar shear strength had the highest increase of 53.13%, higher than that of the fiber grafted with PAMAM containing terminated linear amine. This work provides an alternative approach to enhance the mechanical properties of fiber composites by controlling the interface between fiber and epoxy matrix.     

Mechanical behavior of basalt and glass textile composites at high strain rates: A comparison

The aim of this paper is to study and compare the mechanical behavior of woven basalt and woven glass epoxy composites at high strain rates, in order to assess the possibility of replacing glass fiber composites with basalt fiber composites for aircraft secondary structures, such as radomes, fairings, wing tips, etc. Both composites were produced using the same epoxy matrix, the same manufacturing technique, and with comparable densities, fiber volume fractions, and static stiffnesses. Dynamic tensile and shear experiments were performed using a split Hopkinson tension bar, in addition to reference quasi-static experiments to compare both material behaviors over a wide range of strain rates. Normalized results with respect to the material density and fiber volume fraction showed that basalt epoxy composite had higher elastic stiffness, ultimate tensile strength, ultimate tensile strain, and absorbed energy in tension compared to glass epoxy composite. This suggests a promising potential in replacing glass fibers composites with basalt fiber composites in aircraft secondary structures and, more generally, components prone to impact. However, for the basalt epoxy composite, improvements in the fiber-matrix adhesion and in the manufacturing technique are still required to enhance their shear properties compared to glass fiber composites, and fully exploit the potential of basalt epoxy composites in aeronautical applications.     

多壁碳纳米管/聚乙烯复合材料的制备及其导电行为

多壁碳纳米管/聚乙烯复合材料的制备及其导电行为;碳纳米管;高密度聚乙烯;渗流阈值;导电行为;V-PTC特性     

Enhancement of mechanical and thermal properties of oil palm empty fruit bunch fiber poly(butylene adipate-co-terephtalate) biocomposites by matrix esterification using succinic anhydride

In this work, the oil palm empty fruit bunch (EFB) fiber was used as a source of lignocellulosic filler to fabricate a novel type of cost effective biodegradable composite, based on the aliphatic aromatic co-polyester poly(butylene adipate-co-terephtalate) PBAT (Ecoflex?), as a fully biodegradable thermoplastic polymer matrix. The aim of this research was to improve the new biocomposites' performance by chemical modification using succinic anhydride (SAH) as a coupling agent in the presence and absence of dicumyl peroxide (DCP) and benzoyl peroxide (BPO) as initiators. For the composite preparation, several blends were prepared with varying ratios of filler and matrix using the melt blending technique. The composites were prepared at various fiber contents of 10, 20, 30, 40 and 50 (wt %) and characterized. The effects of fiber loading and coupling agent loading on the thermal properties of biodegradable polymer composites were evaluated using thermal gravimetric analysis (TGA). Scanning Electron Microscopy (SEM) was used for morphological studies. The chemical structure of the new biocomposites was also analyzed using the Fourier Transform Infrared (FTIR) spectroscopy technique. The PBAT biocomposite reinforced with 40 (wt %) of EFB fiber showed the best mechanical properties compared to the other PBAT/EFB fiber biocomposites. Biocomposite treatment with 4 (wt %) succinic anhydride (SAH) and 1 (wt %) dicumyl peroxide (DCP) improved both tensile and flexural strength as well as tensile and flexural modulus. The FTIR analyses proved the mechanical test results by presenting the evidence of successful esterification using SAH/DCP in the biocomposites' spectra. The SEM micrograph of the tensile fractured surfaces showed the improvement of fiber-matrix adhesion after using SAH. The TGA results showed that chemical modification using SAH/DCP improved the thermal stability of the PBAT/EFB biocomposite.     

Effect of rope mat and random orientation on mechanical and thermal properties of banana ribbon-reinforced polyester composites and its application

The present work deals with the characterization of banana ribbon, a new natural fiber, and the effect of rope mat and random orientation on the mechanical and thermal properties of banana ribbon-reinforced polyester composites. Of all the fabricated composites, the banana ribbon rope mat composites showed improved mechanical and thermal properties compared to randomly oriented composites and other natural fiber composites. The surface morphologies of fractured mechanical testing samples were studied by scanning electron microscope to probe the fiber–matrix interaction. Furthermore, the mat composites are used to fabricate windshield of four wheelers and mudguard of two wheelers.     

ENR-25改性CaCO3填充LDPE的复合材料的研究

用环氧程度为25％的环氧化天然橡胶（ENR－25）改性轻质CaCO3。研究了改性方法，改性剂用量，CaCO3填充量对低密度聚乙烯（LDPE）材料与性能的影响。结果表明，7．5％的ENR－25湿法改性有效地改善了CaCO2在LDPE中的分散性及相容性，增强了界面作用强度，使材料在拉伸强度保持较高的情况下，拉伸弹性模量，撕裂强度和断裂伸长率得到有效的提高。     

Biodegradable polyesters reinforced with surface-modified vegetable fibers

Flax fibers are investigated as reinforcing agents for biodegradable polyesters (Bionolle and poly(lactic acid) plasticized with 15 wt.-% of acetyltributyl citrate, p-PLLA). The composites are obtained either by high temperature compression molding fiber mats sandwiched between polymer films, or by batch mixing fibers with the molten polymer. Fibers in composites obtained by the latter method are much shorter (140-200 microm) than those of the mats (5,000 microm). Flax fibers are found to reinforce both p-PLLA and Bionolle (i.e. tensile modulus and strength increase) when composites based on fiber mats are investigated. Conversely, analogous composites obtained by batch mixing show poor mechanical properties. The observed behavior is attributed to the combined effect of fiber length and fiber-matrix adhesion. If flax fibers with a modified surface chemistry are used, the strength of short fiber composites is seen to improve significantly because the interface strengthens and load is more efficiently transferred. Appropriate surface modifications are performed by heterogeneous acylation reactions or by grafting poly(ethylene glycol) chains (PEG, molecular weight 350 and 750). The highest tensile strength of p-PLLA composites is reached when PEG-grafted flax fibers are used, whereas in the case of Bionolle the best performance is observed with acylated fibers.     

Smart modification of inorganic fibers and flammability mechanical and radiation shielding properties of their rubber composites

Facile and smart method for the modification of inorganic fibers has been developed. The polyaniline was synthesized on basalt fiber surface presenting an organic polymer shell to the inorganic fibers. The modified basalt fibers were dispersed in rubber-producing well-dispersed rubber composites. Various mass loadings of modified basalt fibers were dispersed and optimized. The effect of radiation on the properties of developed rubber composites was investigated by exposure to different gamma radiation doses. The flammability, thermal and mechanical properties were studied. The flammability of developed composites was improved achieving 62 and 16% reduction in the peak heat release rate compared to blank rubber and unmodified basalt fiber-based rubber composite, respectively. This is in addition to significant reduction in emission of CO and CO₂ gases by 65 and 58%, respectively. Also, the tensile strength property was enhanced by 38 and 53% compared to blank and unmodified basalt composite, respectively. The role of polyaniline layer on inorganic fiber surface and their effect on the properties of the produced composites was studied. The organic polymer shell achieved good compatibility and interfacial adhesion of basalt fibers with rubber matrix and radiation protection effect for the developed composites.