Polyhedral oligomeric silsesquioxane (POSS) reinforced-unsaturated polyester hybrid nanocomposites: Thermal,thermomechanical and morphological properties

Unsaturated polyester (UP)-POSS hybrid nanocomposites have been developed successfully through the reaction between maleimide groups Octa (maleimido phenyl) silsesquioxane (OMPS) and olefinic reactive sites (maleimide and styrenic units) present in the unsaturated polyester resin system through free radical polymerization using benzoyl peroxide (BP) as the initiator. The hybrid molecular structure of nanocomposites resulted was evaluated by FT-IR spectroscopy. The data obtained from XRD, SEM and TEM analysis ascertain the presence of homogeneous morphology and nanoscale dispersion of OMPS into the polyester hybrid nanocomposites. Data resulted from thermal (DSC and TGA) and thermo-mechanical (DMA) studies indicated that the incorporation of octamaleimide functionalized POSS into unsaturated polyester systems appreciably improved the thermal properties of the hybrid nanocomposites according to their percentage concentration.     

Octa(maleimido phenyl) silsesquioxane copolymers

Octa(maleimido phenyl) silsesquioxane (OMPS) was prepared from octa(aminophenyl) silsesquioxane (OAPS) and maleic anhydride. Initially, octaphenyl silsesquioxane was prepared, and it was nitrated to obtain octa(nitrophenyl) silsesquioxane; subsequently, reduction was carried out to obtain OAPS. These compounds were characterized with Fourier transform infrared, NMR, gel permeation chromatography, and wide‐angle X‐ray diffraction. Differential scanning calorimetry scans of OMPS showed an exotherm above 100 °C, and it was attributed to the curing. The peak maximum temperature depended on the heating rate. Both Ozawa's and Kissinger's methods were used to determine the activation energy for the curing reaction, which was approximately 29 kcal/mol. OMPS was copolymerized with various molar percentages of (1) N,N′‐p‐phenylenedimaleimide (PPMI) and (2) urethane methacrylate (UMA) by thermal and free‐radical polymerization, respectively. The copolymers were characterized with differential scanning calorimetry, dielectric analysis, thermogravimetric analysis, and wide‐angle X‐ray diffraction. In the PPMI and UMA copolymer series, the glass‐transition temperature increased with an increase in the OMPS concentration. The permittivity of the UMA copolymers decreased and tan δ increased with an increase in the OMPS concentration. In air and nitrogen atmospheres, the thermal stability of the PPMI and UMA copolymers increased with an increase in the OMPS concentration. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2483–2494, 2005     

Benzoxazine modified diglycidyl ether of bisphenol-a/silicon/siliconized epoxy hybrid polymer matrices: Mechanical,thermal, electrical and morphological properties

Benzoxazines modified epoxy hybrid polymer matrices were developed using benzoxazines (CB_DDM and BMPB_DDM) and epoxy resins (DGEBA, SE and EP-HTPDMS) to make them suitable for high performance applications. The benzoxazine-epoxy hybrid polymer matrices were prepared via in-situ polymerization and were investigated for their thermal, thermo-mechanical, mechanical, electrical and morphological properties. Two types of skeletal modified benzoxazines namely 1,1-bis(3-methyl-4-hydroxyphenyl)cyclohexane benzoxazine (CB_DDM) and bis(4-maleimidophenyl) benzoxazine (BMPB_DDM) were synthesized by reacting paraformaldehyde and 4,4′-diaminodiphenylmethane with 1,1-bis (3-methyl-4-hydroxyphenyl)cyclohexane and N-(4-hydroxyphenyl)maleimide respectively. Epoxy resins viz., diglycidyl ether of bisphenol-A (DGEBA), silicon incorporated epoxy (SE) and siliconized epoxy resin (EP-HTPDMS) were modified with 5, 10 and 15 wt% of benzoxazines using 4,4′-diaminodiphenylmethane as a curing agent at appropriate conditions. The chemical reaction of benzoxazines with the epoxy resin was carried out thermally and the resulting product was analyzed by FT-IR spectra. The glass transition temperature, curing behavior, thermal stability, char yield and flame resistance of the hybrid polymers were analysed by means of DSC, TGA and DMA. Mechanical properties were studied as per ASTM standards. The benzoxazines modified epoxy resin systems exhibited lower values of dielectric constant and dielectric loss with an enhanced values of of arc resistance, glass transition temperatures, degradation temperatures, thermal stability, char yield, storage modulus, tensile strength, flexural strength and impact strength.     

Octafunctional cubic silsesquioxane (CSSQ)/poly(methyl methacrylate) nanocomposites: Synthesis by atom transfer radical polymerization at mild conditions and the influence of CSSQ on nanocomposites

Organic/inorganic hybrid star‐like nanocomposites from two different octafunctional cubic silsesquioxane (CSSQ) nano‐cage cores and poly(methyl methacrylate) (PMMA) were synthesized using atom transfer radical polymerization (ATRP) at mild conditions, in which octafunctional octakis(3‐hydroxypropyldimethylsiloxy)octasilsesquioxane (OHPS) and octa(aminophenyl)silsesquioxane (OAPS) nano‐cages were used as ATRP initiators. The polymerization was carried out at 50 °C in acetonitrile/water mixture. ¹H‐NMR and GPC were employed to characterize the obtained nanocomposites. GPC data revealed that the resulting nanocomposites exhibit unimodal and narrow molecular weight distributions indicating well‐controlled synthesis and well‐defined hybrid nanocomposites with star architecture. The influence of CSSQ nano‐cages on the thermal property of nanocomposites was investigated using differential scanning calorimetry and thermal gravimetric analysis (TGA). It was observed that the nanocomposites exhibit significantly higher glass transition temperature compared with its linear counterpart because of slow relaxation caused by the star‐like architecture. TGA study, however, did not reveal any significant improvement in thermal stability of nanocomposites as compared with linear PMMA. Finally, field emission scanning electron microscopy images of fractured surfaces of nanocomposite sample films showed well dispersed CSSQ nano‐cages in PMMA matrix without phase separation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 766–776, 2008     

Nanostructured polybenzoxazine thermosets via reaction‐induced microphase separation

A multiblock copolymer consisting of main‐chain polybenzoxazine and poly(propylene oxide) blocks was synthesized via Mannich polycondensation among 4,4′‐dihydroxyldiphenylisopropane, 4,4′‐diaminodiphenylmethane, amino‐terminated poly(propylene oxide), and paraformaldehyde, which was evidenced by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, and gel permeation chromatography. The multiblock copolymer was incorporated into polybenzoxazine to access the nanostructured polybenzoxazine thermosets. The morphology of the thermosets was investigated by means of atomic force microscopy and small angle X‐ray scattering. It was judged that the formation of the nanostructures in the thermosetting composites follows the mechanism of reaction‐induced microphase separation. Owing to the big difference in thermal stability between polybenzoxazine thermosets and poly(propylene oxide), the nanostructured thermosets were subjected to the pyrolysis at moderate elevated temperatures to remove poly(propylene oxide) microdomains, to access the nanoporous polybenzoxazine thermosets. The nanoporosity of the resulting polybenzoxazine thermosets was investigated by means of Fourier transform infrared spectroscopy and field‐emission scanning electronic microscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1148–1159, 2010     

The preparation and properties of polyimide films modified by octa(aminopropylsilsesquioxane)

A number of polyimide films incorporated with different amounts of octa(aminopropylsilsesquioxane) (POSS-NH₂) were prepared from 1,2,4,5-Benzenetetracarboxylic anhydride, 4,4′-Oxydianiline and POSS-NH₂. The structure and properties of the hybrid polyimide films were characterized and evaluated. It is found that, compared with pure polyimide without POSS-NH₂, the thermal stabilities and electrical capabilities of hybrid polyimide films are improved. Meanwhile, the incorporation of POSS-NH₂ also brings improvement in the flexibility of polyimide films.     

Thermal and dielectric properties of newly developed linear aliphatic-ether linked bismaleimide-polyhedral oligomeric silsesquioxane (POSS-AEBMI) nanocomposites

A new series of four different linear aliphatic ether linked aromatic bismaleimides (AEBMIs) were synthesized from the respective linear aliphatic ether-linked aromatic diamines and maleic anhydride. Further, the POSS-AEBMI nanocomposites were developed by Michael addition reaction of bismaleimide with varying mass percentages of octa(aminophenyl)silsesquioxane and were characterized by the fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. Data from thermal studies revealed that the POSS-reinforced AEBMI nanocomposites possesses higher glass transition temperature (Tg), thermal stability, limiting oxygen index, and lower dielectric constant when compare to that of neat AEBMI. X-ray diffraction and transmission electron microscopy analysis confirmed the molecular level dispersion of POSS in the AEBMI matrix.     

Cyclohexane and phosphorus based benzoxazine-bismaleimide hybrid polymer matrices: thermal and morphological properties

Benzoxazine monomers namely 1,1-bis (3-methyl-4-hydroxyphenyl)cyclohexane benzoxazine (CB_DDM) and bis(4-maleimidophenyl) triphenylphosphine oxide benzoxazine (BMPB_BAPPPO) were synthesized and blended with bismaleimide (BMPM) to improve thermal properties of polybenzoxazine. The benzoxazine- bismaleimide (Bz-BMI) hybrid polymer matrices were prepared via in-situ polymerization and their thermal and morphological properties were studied. The chemical reaction of benzoxazines with the bismaleimide was carried out thermally and the resulting product was analyzed by FT-IR spectra. The glass transition temperature, curing behavior, thermal stability, char yield and flame resistance of the hybrid polymer matrices were analyzed using DSC and TGA. The homogeneous structure of the hybrid polymer matrices was determined by SEM and visual observations. Data obtained from thermal studies infer that these hybrid materials possess high thermal stability which can be used as adhesives, sealants, coating and matrices for high performance automobile and microelectronic applications.     

The effects of reactive organoclay on the thermal, mechanical, and microstructural properties of polymer/layered silicate nanocomposites based on chiral poly(amide-imide)s

Considering the importance of the nanocomposites, the present work focuses on some new hybrid materials prepared by introducing reactive organoclay (OC) into the chiral poly(amide-imide) (PAI) matrix. At first, Cloisite Na⁺ was modified with protonated l-isoleucine amino acid. Then, PAI containing phenylalanine was synthesized via solution polycondensation of chiral diacid chloride with 4,4′-diaminodiphenylsulfone and was characterized with Fourier transform infrared (FTIR) and ¹H NMR techniques. At last, PAI/OC nanocomposite films containing 2, 5, 10, and 15 % of OC were prepared via solution intercalation method. The effect of OC dispersion and the interaction between OC and polymer chains on the properties of nanocomposites were investigated using FTIR, X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, tensile testing of thin films, and thermogravimetry analysis techniques. The thermal stability of hybrids such as the decomposition temperature and mass residue at 800 °C was improved. Mechanical data indicated improvement in the tensile strength of the nanocomposites with OC loading up to 10 wt%. The transparency of the hybrid films was investigated by means of UV–Vis spectra.     

New poly(ether-imide)/MWCNT nanocomposite

New polyimide (PI) nanocomposites containing two different amounts of MWCNT (PI/MWCNT) were prepared via in situ polymerization technique. Transmission electron microscopy showed that MWCNT was exfoliated in the polymer matrix, resulting in well-dispersed morphologies at 1 and 3 mass% MWCNT contents. The effects of multiwalled carbon nanotubes (MWCNT) on the thermal and flammability properties of new PI derived from 1,3-bis[4,4′-aminophenoxy]propane and biphenyl dianhydride were investigated by thermogravimetric analysis (TG) in nitrogen and air atmosphere, differential scanning calorimetry, and microscale combustion calorimeter (MCC). The PI/MWCNT nanocomposites were electrically conductive with maximum conductivity obtained at 3 mass% MWCNT, which is favorable for many potential applications. TG results showed that the addition of MWCNT resulted in a substantial increase of the thermal stability and char yields of the nanocomposites compared to those of the neat PI. Flame retardancy of the nanocomposites was significantly improved in the presence of MWCNT.     

Facile,one‐pot synthesis of aromatic diamine‐based benzoxazines and their advantages over diamines as epoxy hardeners

Three aromatic diamine‐based benzoxazines were successfully prepared by a facile, clean, one‐pot procedure from 1,4‐phenylenediamine ( 1 ), 4,4′‐diaminodiphenyl ether ( 2 ), and 4,4′‐diaminodiphenyl methane ( 3 ), respectively. Their structures were confirmed by NMR spectra and single crystal diffractogram. The effect of the reactivity of diamines on the purity of the resultant benzoxazines was discussed. The resultant benzoxazines were applied as hardeners for cresol novolac epoxy (CNE). The processing window, the latent curing characteristic, and the miscibility of benzoxazine/CNE systems were discussed. Compared with diamines ( 1 and 3 ), ( 1 and 3 )‐based benzoxazines show latent curing characteristic as epoxy hardeners, and wide processing windows can be obtained. Compared with diamine ( 2 ) which is immiscible with CNE in the molten state, ( 2 )‐based benzoxazine shows good miscibility with CNE. Dynamic mechanical analysis shows the T_gs of the benzoxazine/CNE thermosets are as high as 242–243 °C. Thermogravimetric analysis shows the outstanding thermal stability of the resultant thermosets. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2430–2437, 2010     

Syntheses and characterization of a new nano-structured bismuth(III) bromide coordination polymer; new precursor for preparation of bismuth(III) bromide and bismuth(III) oxide nanostructures

Nanoparticles of a Bi(III) coordination polymer, {[Bi(μ-4,4′-bipy)Br₄] · (4,4′-Hbipy)} _n (1) (4,4′-bipy = 4,4′-bipyridine), were synthesized by a sonochemical method. The new nanoparticles were characterized by scanning electron microscopy, X-ray powder diffraction (XRD), IR spectroscopy, and elemental analyses. Compound 1 was structurally characterized by single-crystal X-ray diffraction. The thermal stabilities of 1 as bulk and at nanosize were studied by thermal gravimetric (TG) and differential thermal analyses (DTA). The Bi₂O₃ and BiBr₃ nanostructures were obtained by calcinations of nanostructure of 1 in air and argon.     

Polybenzoxazine–silica (PBZ–SiO2) hybrid nanocomposites through in situ sol–gel method

New type of Polybenzoxazine–silica (PBZ–SiO₂) hybrid nanocomposites was prepared through in situ sol–gel method. Benzoxazine was synthesized using bisphenol-A, trans-4-aminocyclohexanol hydrochloride and formaldehyde solution through Mannich condensation reaction and was characterized by FT-IR, ¹HNMR and ¹³CNMR spectroscopy. The methodology adopted in the present study involves to formation of hydrogen bond interaction between the benzoxazine monomer and the silica matrix, followed by the ring opening polymerization of benzoxazine monomer through thermal curing to obtain a red brown transparent PBZ–SiO₂ hybrid. The formation of hybrid nanocomposites was confirmed by FT-IR. Thermal and morphological properties of the hybrid materials were investigated by the differential scanning calorimetry (DSC), thermo gravimetric analysis (TGA), scanning electron microscopy (SEM). The PBZ–SiO₂ hybrids show improved thermal properties and glass transition (Tg) temperature. The nitrogen porosimetry study was carried out to confirm the nanometer level integration of polybenzoxazine in the PBZ–SiO₂ hybrid nanocomposites.     

Copolymerization of fluorene‐based main‐chain benzoxazine and their high performance thermosets

A series of fluorene‐based benzoxazine copolymers were synthesized from the mixture of 9,9‐bis(4‐hydroxyphenyl)fluorene and bisphenol A, and 4,4′‐diaminodiphenyloxide and paraformaldehyde. And the cured polybenzoxazine films derived from these copolymers were also obtained. Fourier transform infrared spectroscopy (FTIR) and hydrogen nuclear magnetic resonances confirmed the structure of these benzoxazines. Their molecular weight was estimated by gel permeation chromatography. The curing behavior of the precursors was monitored by FTIR and differential scanning calorimetry. Dynamic mechanical analysis and thermogravimetric analysis were performed to study the thermal properties of the cured polymers. The cured polybenzoxazines exhibit excellent heat resistance with glass transition temperatures (T_g) of 286–317°C, good thermal stability along with the values of 5% weight loss temperatures (T₅) over 340°C, and high char yield over 50% at 800°C. The mechanical properties of the cured polymers were also measured by bending tests. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis,Characterization of Modified Graphene Oxide/Poly(methyl methacrylate) Composites

Graphene oxide was prepared by improving Hummers method and then modified by 4,4′-oxydianiline to get aminated graphene oxide, which was used to construct redox initiator system with dibenzoyl peroxide for synthesis of poly(methyl methacrylate) grafted to graphene oxide by in situ polymerization. Nanocomposites used grafted polymer as fillers with loadings from 0.5 to 1.0 wt % of poly(methyl methacrylate) were obtained by solution blending. The structures, properties and morphology of graphene oxide, grafted poly(methyl methacrylate) and composites are characterized by Fourier transform infrared spectroscopy, X-ray diffraction, Raman spectra, scanning electron microscopy, thermogravimetric analysis, dynamic mechanical thermal analysis and bacterial adhesion examination respectively. The initial decomposition temperature and the glass transition temperature of the nanocomposites are improved by addition of grafted poly(methyl methacrylate). Furthermore, there is a significant enhancement of the decreasing of the surface bacterial adhesion of prepared nanocomposites.     

Film-forming characteristics and thermal stability of low viscosity benzoxazines derived from melamine

A novel class of low-viscosity benzoxazines has been synthesized from melamine and formaldehyde with phenol or bisphenol A. The striking feature of the class of benzoxazines is the subtle combination of their inherently low viscosity at room temperature, good film-forming characteristics and high chemical and thermal stability mainly due to the introduction of melamine into the network of the polymers. The structure of the benzoxazines has been confirmed by proton nuclear magnetic resonance spectroscopy and fourier transform infrared spectroscopy. Thermal properties of polybenzoxazine have been studied by differential scanning calorimetry, dynamic mechanical analysis and thermogravimetric analysis. Transparent polybenzoxazine films were easily obtained under solvent-free conditions, exhibiting significantly improved toughness compared to the conventional polybenzoxazines. Our research may open a new path for overcoming the present drawbacks of polybenzoxazines such as high brittleness, the difficulties in preparing films and poor processibility via tailoring the structures and properties of amine in the benzoxazines.     

Mechanical properties of clay–polyimide (BTDA–ODA) nanocomposites via ODA‐modified organoclay

Clay–polyimide [3,3′, 4,4′‐benzophenone tetracarboxylic dianhydride–4,4′‐oxydianiline (BTDA–ODA)] nanocomposites were synthesized from ODA‐modified montmorillonite (organoclay) and poly(amic acid). The layered silicates of organoclay were intercalated by polyimide (BTDA–ODA), as confirmed by X‐ray diffraction and by transmission electron microscopy, and the tensile mechanical properties of the nanocomposites were measured. It was found that the modulus and the maximum stress of these organoclay/BTDA–ODA nanocomposites were much higher than those of pure BTDA–ODA: a twofold increase in the modulus and a one‐half‐fold increase in the maximum stress in the case of 7/93 organoclay–BTDA‐ODA. In addition, the elongation‐for‐break of organoclay/BTDA–ODA nanocomposites is even slightly higher than that of pure BTDA–ODA, which is a sharp contrast to that of conventional inorganics‐filled polymer composites. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2873–2878, 2000     

Polyhedral Oligomeric Silsesquioxane (POSS) Nanoscale Reinforcement of Thermosetting Resin from Benzoxazine and Bisoxazoline

Summary: The reaction between octaaminophenyl polyhedral oligomeric silsesquioxane (OAPS) and 2,2′‐(1,3‐phenylene)‐bis(4,5‐dihydro‐oxazoles) (PBO) over different temperature ranges was confirmed by FT‐IR spectroscopy. The OAPS was used to modify benzoxazine (BZ) in the presence of PBO. The novel polybenzoxazine (PBZ)‐PBO/OAPS hybrid nanocomposite was prepared by solvent methods. Dynamic mechanical analyses indicated that the nanocomposites exhibited much higher T_g values than the pristine PBZ and PBZ‐PBO resin, and the storage modulus of the nanocomposites was maintained at higher temperatures, although only a small amount of OAPS was incorporated into the systems. Dynamic thermogravimetric analysis showed that the thermal stability of the hybrid was also improved by the inclusion of OAPS.

DMA of PBZ (a), PBZ‐PBO (b), and PBZ‐PBO/OAPS nanocomposites (c–e).     

Synthesis and thermal behaviour of new poly(azomethine-ether)

A new poly(azomethine-ether) was synthesized by the reaction of bisphenol A with a thermotropic azomethine monomer, namely 4,4′-oxy-bis(4-chlorobenzylideneimino phenylene). In order to understand the influence of the molecular weight on the thermal properties, four fractions were isolated from the initial polymer. They were investigated by elemental analysis and spectroscopic methods (IR, UV, ¹H NMR) and their thermal behaviour was studied by differential scanning calorimetry, optical microscopy, thermogravimetrical analysis. An increase of the thermal transition temperatures and mesophase order with increasing molecular weight was noticed.     

Inorganic–organic nanocomposites of polybenzoxazine with octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane

Octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane (OpePOSS) was used to prepare the polybenzoxazine (PBA‐a) nanocomposites containing polyhedral oligomeric silsesquioxane (POSS). The crosslinking reactions involved with the formation of the organic–inorganic networks can be divided into the two types: (1) the ring‐opening polymerization of benzoxazine and (2) the subsequent reaction between the in situ formed phenolic hydroxyls of PBA‐a and the epoxide groups of OpePOSS. The morphology of the nanocomposites was investigated by means of scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. Differential scanning calorimetry and dynamic mechanical analysis showed that the nanocomposites displayed higher glass‐transition temperatures than the control PBA‐a. In the glassy state, the nanocomposites containing less than 30 wt % POSS displayed an enhanced storage modulus, whereas the storage moduli of the nanocomposites containing more than 30 wt % POSS were lower than that of the control PBA‐a. The dynamic mechanical analysis results showed that all the nanocomposites exhibited enhanced storage moduli in the rubbery states, which was ascribed to the two major factors, that is, the nanoreinforcement effect of POSS cages and the additional crosslinking degree resulting from the intercomponent reactions between PBA‐a and OpePOSS. Thermogravimetric analysis indicated that the nanocomposites displayed improved thermal stability. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1168–1181, 2006