Novel triblock siloxane copolymers: Synthesis,characterization, and their use as surface modifying additives

Synthesis of novel triblock, polycaprolactone-b-polydimethylsiloxane (PDMS) and poly(2-ethyl-oxazoline)-b-PDMS copolymers were demonstrated. These materials were obtained via the ring-opening polymerization of ?-caprolactone or 2-ethyl-2-oxazoline monomers by using organofunctionally terminated PDMS oligomers as initiators and comonomers. Segment molecular weights in these copolymers were varied over a wide range between 1000 and 2000 g/mol and the formation of copolymers with desired backbone compositions were monitored by ¹H-NMR spectroscopy and GPC. DSC and TMA studies showed the formation of two phase morphologies with PDMS (T_g, ?120°C) and polycaprolactone (T_m, 50–60°C) or poly(2-ethyl-2-oxazoline) (T_g, 40-60°C) transitions respectively. The use of polycaprolactone-b-PDMS copolymers as surface modifying additives in polymer blends were also investigated. When these copolymers were blended at low levels (0.25–10.0% by weight) with various commercial resins such as, polyurethanes, PVC, PMMA, and PET, the resulting systems displayed silicone-like, hydrophobic surface properties, as determined by critical surface tension measurements or water contact angles. The effect of siloxane content, block length, base polymer type and morphology on the resulting surfaces are discussed.     

Synthesis and properties of copolymers of methyl methacrylate with 2,3,4,5,6‐pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes: An intrachain interaction between methyl ester and fluoro aromatic moieties

2,3,4,5,6‐Pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes were readily copolymerized with methyl methacrylate (MMA) by a free radical initiator. The copolymers were soluble in tetrahydrofuran and acetone. The films obtained were transparent and flexible. The glass transition temperatures (T_gs) of the copolymers were found positively deviated from the Gordon–Taylor equation. The positive deviation could be accounted for by dipole–dipole intrachain interaction between the methyl ester group of MMA and the highly fluorinated aromatic moiety, which resulted in a decrease in the segmental mobility of the polymer chains and the enhanced T_g values of the copolymers. The water absorption of PMMA was greatly decreased by copolymerization of MMA with the highly fluorinated styrenes. With as little as 10 mol % of pentafluoro styrene content in the copolymer, the water absorption was decreased to one‐third of that for pure PMMA. The fluorinated styrenes‐MMA copolymers were thermally stable up to 420 °C under air and nitrogen atmospheres. With 50 mol % of MMA in the copolymer, the copolymer was still stable up to 350 °C. Since these copolymers contain a large number of fluorine atoms, the light absorption in the region of the visible to near infrared is decreased in comparison with nonfluorinated polymers. Thus, these copolymers may be suitable for application in optical devices, such as optical fibers and waveguides. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Side‐chain crystallization behavior of graft copolymers consisting of amorphous main chain and crystalline side chains: Poly(methyl methacrylate)‐graft‐poly(ethylene glycol) and poly(methyl acrylate)‐graft‐poly(ethylene glycol)

Graft copolymers consisting of amorphous main chain, poly(methyl methacrylate) (PMMA), or poly(methyl acrylate) (PMAc), and crystalline side chains, poly(ethylene glycol) (PEG), have been prepared by copolymerization of PEG macromonomers with methyl methacrylate or methyl acrylate (MMAx or MACx, respectively). Because of the compatibility of PMMA/PEG and PMAc/PEG, from small‐angle X‐ray scattering results, the main and side chains in graft copolymers were suggested to be homogeneous in the molten state. Differential scanning calorimetry (DSC) cooling scans revealed that PEG side chains for graft copolymers with large PEG fractions were crystallized when the sample was cooled, with a cooling rate of 10 °C/min. The spherulite pattern observed by a polarized optical microscope suggested the growth of PEG crystalline lamellae. Crystallization of PEG in MMAx was more restrained than in MACx. From these results, we have concluded that the crystallization behavior of the grafted side chains is strongly influenced by the glass transition of a homogeneously molten sample as well as dilution of the crystallizable chains. Domain spacings for isothermally crystallized graft copolymers were described by interdigitating chain packing in crystalline–amorphous lamellar structure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 79–86, 2005     

Synthesis of methyl methacrylate,styrene, and isobutylene multiblock copolymers using atom transfer and cationic polymerization

ABCBA‐type pentablock copolymers of methyl methacrylate, styrene, and isobutylene (IB) were prepared by the cationic polymerization of IB in the presence of the α,ω‐dichloro‐PS‐b‐PMMA‐b‐PS triblock copolymer [where PS is polystyrene and PMMA is poly(methyl methacrylate)] as a macroinitiator in conjunction with diethylaluminum chloride (Et₂AlCl) as a coinitiator. The macroinitiator was prepared by a two‐step copper‐based atom transfer radical polymerization (ATRP). The reaction temperature, ?78 or ?25 °C, significantly affected the IB content in the resulting copolymers; a higher content was obtained at ?78 °C. The formation of the PIB‐b‐PS‐b‐PMMA‐b‐PS‐b‐PIB copolymers (where PIB is polyisobutylene), prepared at ?25 (20.3 mol % IB) or ?78 °C (61.3 mol % IB; rubbery material), with relatively narrow molecular weight distributions provided direct evidence of the presence of labile chlorine atoms at both ends of the macroinitiator capable of initiation of cationic polymerization of IB. One glass‐transition temperature (T_g), 104.5 °C, was observed for the aforementioned triblock copolymer, and the pentablock copolymer containing 61.3 mol % IB showed two well‐defined T_g's: ?73.0 °C for PIB and 95.6 °C for the PS–PMMA blocks. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3823–3830, 2005     

Effects of chain microstructure of butadiene-isoprene copolymers on their glass transition and crystallization

<正>A series of butadiene-isoprene copolymers(BIR) with various compositions were synthesized with a neodymiumbased catalyst system.The microstructure,composition and sequence of copolymers were characterized by FTIR and ~(13)C-NMR spectroscopy.The crystallization behavior of the BIR copolymers was investigated by DSC analysis.The results demonstrate that the content of cis-1,4 configuration in both butadiene(Bd) and isoprene(Ip) units are around 98%when Bd content in feed(f_(Bd)) covering the range from 55.7 mol%to 96.0 mol%.The reactivity ratios of Bd and Ip were determined to be 1.40 and 0.48 respectively.The random copolymers of Bd and Ip show only one glass transition temperature(T_g) from -107.4℃to -80.5℃,which is dependent on the composition and fits nicely with Fox equation.The sequence distribution followed the first-order Markov statistical model.It is found that the copolymer chains with higher Bd content contain longer polybutadiene(PBd) segments,and the sequence length of PBd segments(N_(Bd)) exhibits great influence on the crystallization behavior of the copolymer.The copolymers with N_(Bd)≥11.8 could crystallize at low temperatures(-71℃to-43℃).The crystallization temperature and enthalpy values decreased gradually with decreasing N_(Nd).The copolymers with N_(Bd)≤7.9 are amorphous even at very low temperatures(0℃to-150℃) due to the short PBd segments.     

Polymerization of N-(p-aminobenzoyl)caprolactam: Block and alternating copolymers of aromatic and aliphatic polyamides

The polymerization behavior of N-(p-aminobenzoyl)caprolactam was studied. It was found that polymerization could proceed by either elimination of caprolactam or by ring opening. Polymers prepared at temperatures above 200°C showed a greater tendency for ring opening to produce alternating aromatic/aliphatic copolymers than did polymers prepared at lower temperatures. Block copolymers of poly(p-benzamide) and nylon 6 were prepared by a two-stage hydrolytic polymerization process or by anionic polymerization at temperatures > 200°C. Polymer microstructures were determined using ¹³C-NMR spectroscopy by comparison with homopolymers and model alternating copolymers. The alternating copolymer prepared by condensation of N-(p-aminobenzoyl)-6-caproic acid showed a melting transition at 300–305°C in the DSC and a T_g in subsequent heating cycles of 116–119°C. Copolymers made with the two-stage process were rich in p-benzamide sequences and showed no T_g or T_m below 400°C. Copolymer made with NaH was rich in nylon 6 units, showed a T_m of 175–180°C and a T_g of 80–81°C, and was homogeneous in both the melt and solid.     

Synthesis and Study of Polymeric Ultraviolet Absorbers. II

Polymeric UV absorbers have been prepared by free-radical solution copolymerization at 75°C of methyl methacrylate and 2-hydroxy-4-methacryloyloxybenzophenone monomers at low conversion (around 10%). The composition of the copolymers was determined by UV, IR, and NMR studies. The molecular weight was estimated by GPC. The reactivity ratios were determined by several methods. Viscosity was used to study the effect of copolymer composition and solvents. The copolymers were also analyzed by TGA and DSC, and DSC was used to study the effect of copolymer composition on T_g.     

Synthesis of Diblock Copolymers With Cellulose Derivatives. 2. Characterization and Thermal Properties of Cellulose Triacetate-Block-Oligoamide-15

Well-defined A-block-B type cellulose derivatives consisting of cellulose triacetate (CTA) and oligoamide-15 were synthesized. Chemical structures of the diblock copolymers were characterized by MALDI-TOF MS, ¹H-NMR, and GPC. Influence of length of CTA and oligoamide-15 segments on their thermal properties was investigated by means of differential scanning calorimetry (DSC). All diblock copolymers displayed T _g, T _c, and T _m transition temperatures. Their T _g and T _m values increased with the increase of molecular weight of CTA segment. The crystallinity of diblock copolymers increased after isothermal crystallization at 200 °C. Its X-ray analysis revealed that the diblock copolymer had CTA II crystal structure. Thermal analysis supported microphase separation between CTA and oligoamide-15 segments at room temperature, because T _g and T _m values of polyamide-15 are −7 °C and 170–180 °C, respectively.     

Effect on structural relaxation of the poly(methyl‐methacrylate) copolymers chain flexibility

The structural relaxation of poly(methyl‐methacrylate) (PMMA)‐based copolymers with different chain flexibility has been studied by DSC with the classical procedure of the isothermal and dynamical approach. Modified PMMA with different chain flexibility have been prepared by free radical polymerization in solution using a mixture of monomers containing 10 mol % of alkyl methacrylate (i.e., ethyl, buthyl, and hexyl methacrylate). The molecular characteristics of all the prepared copolymers have been performed by a multiangle laser light scattering (MALS) photometer on‐line to a size exclusion chromatography (SEC) system (SEC‐MALS) after and before the thermal treatments, NMR (¹H and ¹³C) and MALDI‐TOF mass spectrometry. A comparison of the apparent relaxation rate (R_H) was appraised from the enthalpy loss by annealing the different samples at the same level of undercooling (T_a = T_g ? 18 °C). It was found an increase of R_H increasing the chain flexibility in the copolymers. Dynamical tests, performed at different cooling rates, have been used to estimate the apparent activation energy of the relaxation process. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 596–607, 2009     

Synthesis and characterization of poly(p-arylene sulfide ketone/Schiff base) copolymers

Poly(p-arylene sulfide ketone/Schiff base) copolymers(PASK/SB) were prepared by solution polycondensation of 4,4’-diflurobenzophenone(DFBP) and N-phenyl(4,4’-diflurodiphenyl) ketimine(DFBI) with sodium sulfide in the presence of sodium hydroxide under normal pressure.Elemental analyses,FT-IR,NMR,DSC,TGA and XRD were used to characterize the resultant copolymers.It was found that the copolymers had good thermal properties with glass transition temperature(T_g) of 155.0-172.0°C,melting temperature(T_m) of 298-344°C,5%weight loss temperatures(T_d) of 471.0-501.5°C.These copolymers were almost amorphous with the content of DFBI beyond 30%.The polymer with 100% DFBI had excellent solubility,and it could dissolve in some solvents such as tetrahydrofuran(THF) and N-methyl-2- pyrrolidone(NMP).The processability of polymers was improved.Meantime the viscosity of PASK made from hydrolysis of PASK/SB(H-PASK/SB) was greatly improved from 0.135 dL/g to 0.605 dL/g.     

Poly(methyl methacrylate)/Methacryl-POSS Nanocomposites with Excellent Thermal Properties

Poly(methyl methacrylate) (PMMA) nanocomposites containing (methacryloxy)propyl polyhedral oligomeric silsesquioxane (methacryl‐POSS) were prepared by bulk‐polymerization process. The structures of the products were characterized by FTIR, solid‐state NMR, TEM, XRD, DSC, TGA, XPS and UV‐Vis spectra. The hybrid materials were found to be largely homogeneous. DSC and TGA results indicate that the thermal properties of PMMA nanocomposites are significantly improved. The glass transition temperature (T_g) and thermal decomposition temperature (T_dec) of the nanocomposites increased by 58 and 110°C, respectively. The bulk hybrid material maintains excellent optical transparency in visible region.     

The influence of variant PE‐b‐PEO segments on physical properties of LLDPE graft copolymers

A method was adopted to fix a series of polymers of PE‐b‐PEO with different PEO/PE segments on the chains of LLDPE. Maleic anhydride (MA) reacting with hydroxyl group of PE‐b‐PEO (mPE‐b‐PEO) was used as the intermediate. The structures of intermediates and graft copolymers were approved by ¹H NMR and FTIR. XPS analysis revealed a great amount of oxygen on the surface of grafted copolymers although the end group of PEO was fixed on the LLDPE chains through MA. Thermal properties of the graft copolymers as determined by differential scanning calorimetry (DSC) showed that PE segments in the grafted monomers could promote the heterogeneous nucleation of the polymer, increase T_c, and crystal growth rate. While the amorphous PEO segments which attached to the crystalline PE segments in LLDPE, impaired their ability to fit the crystal lattice, and depressed the crystallization of LLDPE backbones. In this study, it was also verified through the dynamic rheological data that increasing M_n of grafted monomers significantly increased the complex viscosity and enhanced the shear‐thinning behavior. Long‐branched chains formed by grafted monomers enhanced the complex moduli (G′ and G″) value and retarded relaxation rate. However, there were little influence on the rheological properties when increasing the amounts of PEO segments (or decreasing PE segments) of grafted monomers with similar molecular weight. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 506–515, 2008     

Copolymers of methyl methacrylate with N‐trifluorophenyl maleimides: High glass transition temperature and low birefringence polymers

Copolymers of methyl methacrylate (MMA) with 2,3,4‐ and 2,4,6‐trifluorophenyl maleimides (TFPMIs) were synthesized by a free radical initiator, azobisisobutyronitrile, in 1,4‐dioxane and also in bulk. The refractive indexes of the copolymers were in the range of 1.49–1.52 at 532 nm. The T_gs were 133–195 °C depending on copolymer compositions. In addition, the copolymers were thermally stable, T_d > 350 °C. The orientational and photoelastic birefringence of the copolymers were also investigated. As both of the orientational and photoelastic birefringences of PMMA are negative, whereas those of poly(TFPMI)s are positive, we could obtain nearly zero orientational and photoelastic birefringence polymers when the ratios of 2,3,4‐TFPMI/MMA were 15/85 and 5/95 mol %, respectively. For 2,4,6‐TFPMI, zero orientational and photoelastic birefringences could be obtained when the ratios of 2,4,6‐TFPMI/MMA were 12/88 and 3/97 mol %, respectively. The T_gs of those copolymers with zero birefringences were in the range of 135–140 °C. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel Copolymers of Styrene and Some Halogen Ring-substituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-substituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₃CH═C(CN)₂ (where R is 2-bromo,3-bromo, 3-chloro, 2,3-dichloro, 2-chloro-6-fluoro, 2,6-difluoro, 3,4-difluoro, and 3,5-difluoro) and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (AIBN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR, GPC, DSC, and TGA. High T _g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 200–800°C range.     

Graft copolymerization of methyl methacrylate onto curdlan

Graft copolymerization of methyl methacrylate onto curdlan was first investigated. In the graft copolymerization initiated by ammonium persulfate (APS) in DMSO under a homogeneous condition, the resulting graft copolymers had low molecular weights and low grafting percentages. However, the initiation by APS in water gave graft copolymers having relatively higher molecular weight ( ) and higher grafting percentage (548%) than those copolymers obtained by the homogeneous condition. When the graft copolymerization was carried out by cerium (IV) ammonium nitrate-HNO₃ initiation, the graft copolymer had the highest grafting percentage of 1620% without degradation of the curdlan backbone. The resulting graft copolymers were soluble in DMSO. The graft copolymers obtained by the cerium salt had narrow molecular weight distributions () compared with those by the APS catalyst in DMSO or water. The graft copolymers decomposed with sulfuric acid to isolate PMMAs, which molecular weights were larger than that of the corresponding homo-PMMAs. The structure of the grafted copolymers was characterized by IR, ¹³C NMR, DSC, and SEM. It was found that the graft copolymers exhibited the glass transition temperature (T_g), though curdlan had no T_g. As the grafting percentage increased, the T_g increased to reach 270°C, which was higher than the decomposition temperature of curdlan. The surface image of the grafted copolymers observed by SEM, showed smoothless compared with that of curdlan. It was also revealed that the graft copolymers having the grafting percentage of 1620% swelled in common organic solvents up to 4.5 times of the weight of the dry graft copolymer to form gels. © 1996 John Wiley & Sons, Inc.     

Structure of Styrene and Acrylate Block Copolymers

Abstract

Using UV light as the energy source and polystyrene- (PS-) or polymethyl methacrylate- (PMMA-) macroinitiators with active aromatic or aliphatic thiyl end groups, PS-PMMA and PMMA-PEA (poly-ethyl acrylate) block copolymers were synthesized. The molecular weights of both block copolymers increased with increasing reaction time. The reactivity of macroinitiators depended on the type of thiyl groups and monomer and not on the length of the polymer chain. The most reactive were macroinitiators containing resonance stabilized non-substituted or substituted aromatic end groups. The decomposition of the macroinitiators took place over the formation of the thiyl radical and macroradical. The bond length, the bond dissociation energy, and the bond order of macroradical end groups were calculated. The most reactive monomer was ethyl acrylate; the less reactive was styrene. The structure, the molecular weight, and the T _g of the styrene-acrylate block copolymers were determined. The PMMA/PEA block copolymer had two of block's T _g s, the first at 105°C, the second at ?24°C, and a third at 16°C which probably represents contacting segments.     

Functionalization of Graphene Sheets via Chemically Grafting of PMMA Chains Through in-situ Polymerization

In this work, we report the preparation of graphene nanoplatelet which covalently functionalized with PMMA chains by introduction of vinyl groups onto graphene surface through simple esterification reaction between hydroxyl groups of graphite oxide and methacrylic anhydride. The synthesis is followed by in-situ polymerization with MMA monomers. The structural properties were characterized with X-ray diffraction spectroscopy (XRD) and scanning electronic microscopy (SEM) that showed the crystalline graphite is converted to individual layers during the synthesis steps. The grafting of PMMA chains was monitored with IR spectroscopy (FT-IR) and thermogravimetric analysis (TGA). The TGA results revealed 40% wt of PMMA chains chemically grafted onto graphene surface. Significant increase in glass transition temperature (T_g) and existence of polymer chains in two positions (physically absorbed and chemically grafting onto graphite surface) are indicated by differential scanning calorimetric (DSC) analysis.     

Glass transitions and mixed phases in block SBS

Differential scanning calorimetry (DSC) does not allow for easy determination of the glass‐transition temperature (T_g) of the polystyrene (PS) block in styrene–butadiene–styrene (SBS) block copolymers. Modulated DSC (MDSC), which deconvolutes the standard DSC signal into reversing and nonreversing signals, was used to determine the (T_g) of both the polybutadiene (PB) and PS blocks in SBS. The T_g of the PB block was sharp, at ?92 °C, but that for the PS blocks was extremely broad, from ?60 to 125 °C with a maximum at 68 °C because of blending with PB. PS blocks were found only to exist in a mixed PS–PB phase. This concurred with the results from dynamic mechanical analysis. Annealing did not allow for a segregation of the PS blocks into a pure phase, but allowed for the segregation of the mixed phase into two mixed phases, one that was PB‐rich and the other that was PS‐rich. It is concluded that three phases coexist in SBS: PB, PB‐rich, and PS‐rich phases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 276–279, 2005     

Synthesis of semitelechelic POSS‐polymethacrylate hybrids by thiol‐mediated controlled radical polymerization with unusual thermal behaviors

We have developed an efficient and versatile method for the synthesis of polyhedral oligomeric silsesquioxanes (POSS)‐polymethacrylate hybrids, such as POSS‐poly(methyl methacrylate) (POSS‐PMMA), POSS‐poly(ethyl methacrylate) (POSS‐PEMA), and POSS‐poly(benzyl methacrylate) (POSS‐PBzMA) of controllable molecular weights and low polydispersities by thiol‐mediated radical polymerization at elevated temperature (100 °C). By tuning the reactant concentrations and degree of polymerization of the grafted polymethacrylate chains, POSS content in these hybrid materials could be varied. MALDI‐TOF‐MS analysis of the hybrid molecule shows that the nanoscale POSS moiety is connected to the end of polymethacrylate chain through the sulfur atom bridge. These hybrid materials were further characterized using various techniques such as FTIR, XRD, NMR, TGA, and DSC. In all synthesized hybrids, the incorporation of POSS moiety at the end of polymethacrylate chain resulted in the decrease of glass transition temperature (T_g) compared to that of neat polymethacrylates of comparable molecular weights. Surprisingly, POSS‐PMMA hybrids only with relatively high POSS content (～ 10 and 16 wt %) showed physical aging behavior as reveled by DSC study. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1111–1123, 2008     

Modifying an amorphous polymer to a fast crystallizing semi‐crystalline material by copolymerization with monodisperse amide segments

Segmented block copolymers of polysulphone with monodisperse amide segments were synthesized by a melt and a solution polymerization method. Both triblock and multiblock copolymers were prepared. The length of the difunctional polysulphone was varied from 2000 to 20,000 g/mol. The monodisperse amide segment was the tetra‐amide T6T6T based on terephthalic acid (T) and hexamethylene diamine (6) units. The main goal of this work was to study if the high T_g amorphous polysulphone could be modified to a high T_g semi‐crystalline PSU‐T6T6T copolymer. The copolymers were characterized by viscosity measurements, NMR, FTIR, MALDI‐TOF, DSC, and DMA. Depending on the amide concentration in the copolymers the T6T6T melting temperatures ranged between 220 and 270 °C and thus the crystallization window was small 50–100 °C. From the FTIR results, it was revealed that the crystallinity of the T6T6T segments in the copolymer could be very high, up to 92–97%. The T6T6T has crystallized out into nanoribbons with a high aspect ratio. These high T_g semi‐crystalline copolymers had a high dimensional and solvent resistance. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 63–73, 2010