ZnO formation under hydrothermal conditions from zinc hydroxide compounds with various chemical histories

The sequence of phase transformations of zinc hydroxide compounds with various chemical histories during hydrothermal (HT) treatment is studied by X-ray powder diffraction and thermal analysis (TG/DTA). ?-Zn(OH)₂ (wulfingite) is the major intermediate in ZnO production by the HT process. The micromorphology and photocatalytic activity of ZnO powders are studied.     

Mechanosynthesis of zinc ferrite in hardened steel vials: Influence of ZnO on the appearance of Fe(II)

Nanocrystalline ZnFe₂O₄ spinel powders are synthesized by high-energy ball milling, starting from a powder mixture of hematite (α-Fe₂O₃) and zincite (ZnO). The millings are performed under air using hardened steel vials and balls. X-ray diffraction and Mössbauer spectrometry are used to characterize the powders. A spinel phase begins to appear after 3 h of milling and the synthesis is achieved after 9 h. Phase transformation is accompanied by a contamination due to iron coming from the milling tools. A redox reaction is also observed between Fe(III) and metallic iron during milling, leading to a spinel phase containing some Fe(II). The mechanism for the appearance of this phase is studied: ZnO seems to have a non-negligeable influence on the synthesis, by creating an intermediate wüstite-type phase solid solution with FeO.     

Nano-sized Cu6Sn5 alloy prepared by a co-precipitation reductive route

Nano-sized Cu₆Sn₅ alloy powders were prepared by a co-precipitation reductive route using a hydrothermal method at 80 °C. The nano-size and morphology of the synthesized Cu₆Sn₅ alloy powders were evaluated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The obtained morphologies, chemical compositions are comparatively discussed. A variety of synthesis parameters, such as time, capping agent and sort of reductant, has an effect on the morphology of the obtained materials, and will be particularly highlighted.     

Mechanism and kinetics of the hydrothermal synthesis of titanium dioxide

In situ heat-flow calorimetry, powder X-ray diffraction, and X-ray diffraction analysis are used to study titanium dioxide formation under hydrothermal conditions. The effect of the chemical history on the formation mechanism and micromorphology of the resulting nanocrystalline TiO₂ powders is studied.     

Microwave assisted hydrothermal synthesis of zinc hydroxystannate films on glass substrates

Zinc stannate (ZnSnO₃, Zn₂SnO₄) and its precursor, i.e. zinc hydroxystannate (ZnSn(OH)₆), have emerged as technological nanomaterials for different applications. Herein, we report synthesis of polycrystalline zinc hydroxystannate (ZHS) film on glass substrate through facile and efficient microwave assisted hydrothermal growth. The method comprises of three steps; deposition of ZnO seed films on glass substrates through spray pyrolysis, growth of ZnO nanorod arrays over the seeded substrates through microwave assisted hydrothermal method and transformation of the as-synthesized ZnO nanorod arrays into the ZHS films through microwave treatment in aqueous precursor solution of SnCl₄ and NaOH. The films were characterized by energy dispersive X-ray spectroscopy, X-ray diffraction and scanning electron microscopy (SEM). The films contain two crystalline phases namely ZnO with [002] as preferred growth direction and ZnSn(OH)₆ preferably grown along [200] vector. The obtained ZHS films consist of crystals of exclusively cubic structure with sizes up to several microns. Microwave irradiation time, NaOH/SnCl₄ molar ratio, concentration of Sn⁴⁺ ions, and the applied power are the four parameters which influence the size, aerial density and growth rate of ZHS microblocks.     

Effect of synthesis duration on the morphological and structural modification of the sea urchin-nanostructured γ-MnO2 and study of its electrochemical reactivity in alkaline medium

Single-crystalline nanorods and sea urchin-like morphology of the γ-MnO₂ nanostructures were successfully synthesized by hydrothermal method at different synthesis durations. The as-synthesized products were characterized by the techniques X-ray powder diffraction (XRD), field emission gun-scanning electron microscope (FEG-SEM) coupled with energy-dispersive X-ray elemental analysis (EDX), transmission electron microscope (TEM), isotherms of N₂ adsorption/desorption and BET-BJH models. The effect of synthesis duration on the morphology, porous structure, and crystallographic form of MnO₂ powders was studied. The electrochemical reactivity of as-prepared powders was investigated in 1 mol L^?1 KOH by both cyclic voltammetry and impedance spectroscopy by using a micro-cavity electrode. The results show that the best electrochemical reactivity of the MnO₂ powder was obtained with synthesis duration of 24 h.     

Antibacterial and Photocatalytic Properties of ZnO Nanoparticles Obtained from Chemical versus Saponaria officinalis Extract-Mediated Synthesis

In the present work, the properties of ZnO nanoparticles obtained using an eco-friendly synthesis (biomediated methods in microwave irradiation) were studied. Saponaria officinalis extracts were used as both reducing and capping agents in the green nanochemistry synthesis of ZnO. Inorganic zinc oxide nanopowders were successfully prepared by a modified hydrothermal method and plant extract-mediated method. The influence of microwave irradiation was studied in both cases. The size, composition, crystallinity and morphology of inorganic nanoparticles (NPs) were investigated using dynamic light scattering (DLS), powder X-ray diffraction (XRD), SEM-EDX microscopy. Tunings of the nanochemistry reaction conditions (Zn precursor, structuring agent), ZnO NPs with various shapes were obtained, from quasi-spherical to flower-like. The optical properties and photocatalytic activity (degradation of methylene blue as model compound) were also investigated. ZnO nanopowders’ antibacterial activity was tested against Gram-positive and Gram-negative bacterial strains to evidence the influence of the vegetal extract-mediated synthesis on the biological activity.     

ZnO微晶的水热合成及形貌控制研究

以Zn(NH3)4(Ac)2为前驱体,不加任何模板剂和表面活性剂,低温下通过改变反应条件(如前驱体浓度、反应时间及反应温度),实现了对ZnO微晶形貌和尺度的有效控制.所得花状、蜂窝状、柱状ZnO用X射线衍射仪和扫描电镜进行了鉴定和表征,并初步探讨了不同形貌ZnO微晶的生长机理.     

Hydrothermal synthesis of 2D ordered macroporous ZnO films

The ZnO films with two-dimensional ordered macroporous structure were successfully fabricated through hydrothermal crystal growth of ZnO on the ZnO substrate covered with a monolayer of polystyrene (PS) spheres as template. The precursor solution of hydrothermal crystal growth of ZnO were prepared by equimolar solution of Zn(NO₃)₂·6H₂O and hexamethylenetramine (HMT). The confinement effect of the PS spheres template on the growth of ZnO nanorods and the influence of sodium citrate on the crystal growth of ZnO had been studied. The film surface morphology and the preferential growth of ZnO crystal were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. Also, the photoluminescence spectrum of ZnO films had been measured, and the corresponding mechanism was discussed. __________ Translated from Chemistry, 2007, 70 (8): 587–592 [译自: 化学通报]     

Structural,optical and magnetic characterization of ZnO nanorods synthesized using hydrothermal technique at low temperature

Pure ZnO nanorods were grown from aqueous solutions at low temperature (90 °C) by hydrothermal growth technique on sapphire (0001) substrate coated with ZnO thin film. X-ray diffraction results show that these nanorods crystallize in the wurtzite structure having space group P6₃mc and that they are oriented along the c-axis. Raman and photo-luminescence studies show the presence of oxygen vacancies in the ZnO nanorods. The ZnO nanorods show room temperature ferromagnetism.     

Hydrothermal synthesis and optical study of bunches of ZnO nanowires

Bunches of ZnO nanowires have been synthesized by hydrothermal process with the assistance of cetyltrimethylammonium bromide. The obtained bunches of ZnO nanowires are hexagonal wurtzite structures, and they exhibit orange visible emission ~600 nm. It seems the orange emission ~600 nm is due to the presence of Zn(OH)₂ on the surface of ZnO nanowires. On the basis of material information provided by X-ray diffraction, scanning electron microscopy and photoluminescence, a growth mechanism is proposed for the formation of bunches of ZnO nanowires.     

一维棒状ZnO的制备及电化学嵌锂性能研究

目前,商业化锂离子电池一般采用石墨作为负极材料,因其电位与金属锂电极的电位很接近,所以当电池反复循环和过充时,石墨表面易析出金属锂,会因形成枝晶而短路。在温度过高时还容易引起热失控。同时,锂离子电池的容量在很大程度上取决于负极的锂嵌入量,而且石墨材料容量相对较低     

Hydrothermal low-temperature preparation and characterization of ZnO nanoparticles supported on natural zeolite as a highly efficient photocatalyst

Abstract  

Nanoparticles of zinc oxide were supported on natural zeolite using a hydrothermal method. The catalyst was characterized by X-ray diffraction, UV–vis diffuse reflectance spectra, scanning electron microscopy, and energy-dispersive X-ray techniques. The maximum rate constant for photodegradation of methylene blue (MB) was observed at 80 wt.% ZnO. The influence of various parameters such as catalyst composition, initial concentration of MB, calcination temperature, pH, and catalyst weight on the photodegradation reaction was studied. It was found that photodegradation of MB followed pseudo-first-order kinetics. The rate constant of the reaction for 80 wt.% ZnO at optimized conditions was approximately 3.8 times higher than that for bare ZnO. The photocatalyst had good reusability after four runs. The higher activity of the supported catalyst is due to greater adsorption of MB on the catalyst and its capability to delocalize the conduction-band electrons of excited ZnO.     

Solvothermal synthesis of nanosized particles of vanadium oxide

The interaction of vanadyl acetate, vanadium(V) oxide, and vanadium(V) isopropylate with capronic acid has afforded a series of nanosized vanadium oxide powders. The products structure has been studied by X-ray diffraction analysis. Both amorphous and crystalline powders of vanadium oxide can be prepared depending on the starting compound, temperature, and the synthesis duration, the V₂O₃ (karelianite) structure being in all the cases the most thermodynamically stable. Photocatalytic properties of the prepared powders have been studied.     

Facile fabrication of hierarchical ZnO nanowire aggregates using rose-like peroxide precursor as the inorganic template

The complex rose-like inorganic templates assembled by the ZnO/ZnO₂ hybrid nanosheets have been constructed with hydrogen peroxide as an additive to control the structure of a precursor. The surface morphologies of the inorganic templates can be controlled by varying the reaction time and the amount of hydrogen peroxide. The process of the precursor growth takes a dissolution-growth route under hydrothermal conditions. The chemical composition of the precursor is determined by X-ray diffraction (XRD) and Raman analyses, indicating the existence of peroxide in the precursor. Combined with transmission electron microscopy (TEM) data, the ZnO/ZnO₂ hybrid precursor is proposed to act as an inorganic template for the growth of secondary crystal structures. The dandelion-like ZnO crystal is fabricated by using rose-like peroxide precursor as the inorganic template. The structural evolution of hierarchical ZnO crystal is studied by monitoring the influence of the reaction time.     

微波诱导燃烧法合成类花状ZnO纳米材料及其晶体结构、荧光性质研究

以硝酸锌[Zn(NO3)2.6H2O]和尿素[CO(NH2)2]作前驱体,通过微波诱导燃烧技术可控合成具有不同形貌的ZnO纳米晶体,并用热重分析和差热分析进行了研究。对各种生长条件:微波功率,辐射时间和尿素/Zn2+物质的量的比对ZnO纳米晶体形貌的影响作了分析。结果表明:尿素/Zn2+物质的量的比对ZnO纳米材料的形貌具有显著影响。X衍射图表明合成的ZnO纳米结构呈六角形。傅里叶变换红外光谱图中400~500 cm-1处明显的峰为Zn-O的振动峰。ZnO纳米结构的发光光谱在366 nm的带边发射,因缺陷又由许多可见光发射峰组成。用扫描电子显微镜、透射电子显微镜、选区电子衍射研究了花状ZnO纳米结构的增长机理。本方法仅需几分钟就获得的了ZnO纳米结构。     

One-pot synthesis, photoluminescence, and photocatalysis of Ag/ZnO composites

One-pot synthesis of Ag/ZnO composites is described by a simple hydrothermal approach. In the reaction process, hexamethylenetetramine (HMT) can convert into ammonia and formaldehyde, which are used as a precipitant for the fabrication of ZnO and a reducing agent for the loading of metal Ag, respectively. The UV emission of ZnO is obviously enhanced by the deposition of silver islands on its surface. The photocatalytic characterization reveals that the composites behave high photocatalytic activity for a solution of rhodamine B. The influence of Ag+ ions on the morphology of ZnO is discussed. The composites are characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and photoluminescence (PL).     

Influence of different precursors and Mn doping concentrations on the structural,optical properties and photocatalytic activity of single-crystal manganese-doped ZnO

Mn-doped ZnO single-crystal micronuts were synthesized via hydrothermal method in an hexamethylenetetramine aqueous solution. These micronuts are of wurtzite crystal structure. The effects of Mn doping amount and precursor concentration on the structural, optical properties and photocatalytic activity have been investigated. The synthesized Mn-doped ZnO was characterized by X-ray powder diffraction, field emission scanning electron microscopy (FESEM), UV–Vis absorption and photoluminescence spectroscopy. The structural analyses based on X-ray diffraction revealed the absence of Mn-related secondary phases. According to FESEM results, the length of ZnO micronuts was in the range of 5–8 μm. The band gap energy increased on increasing Mn doping concentration. The photocatalytic activity was studied by degradation of methyl orange aqueous solution, which showed that the Mn-doped ZnO micronuts prepared in precursor concentration of 0.1 M and 4% Mn doping had the highest photocatalytic activity. The effects of crystal defect and band gap energy on photocatalytic activity of Mn-doped ZnO samples were studied in different precursors and Mn doping amounts.     

Co-templating synthesis of highly dispersed 1D ZnO nanostructures in amorphous SiO2 under hydrothermal condition

One-dimensional (1D) ZnO nanostructures were grown in amorphous SiO₂ matrix by a co-templating method under hydrothermal condition. Using ethylenediamine (EDA) groups grafted mesoporous silica MCM-41 as a co-template, the growth of 1D ZnO nanostructures was oriented by soft EDA groups and confined inside the hard mesochannels of MCM-41. The microstructure and morphology of the 1D-ZnO-nanostructures/SiO₂ composite were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and X-ray energy dispersive spectroscopy (EDS). All these results indicate that the 1D ZnO nanostructures were synthesized and highly dispersed in the amorphous SiO₂ matrix. Blue-shifted exciton absorption was observed from the co-templating synthesized sample.     

CTAB-assisted hydrothermal synthesis of YVO4:Eu powders in a wide pH range

Rhombus-, rod-, soya bean- and aggregated soya bean-like YVO₄:Eu³⁺ micro- and nanostructures were synthesized by a cetyltrimethylammonium bromide (CTAB)-assisted hydrothermal method at 180 °C for 24 h in a wide pH range. The as-synthesized powders were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and photoluminescence spectroscopy (PL). The XRD results confirmed the formation of phase-pure YVO₄:Eu³⁺ powders with tetragonal structure under hydrothermal process in a wide pH range. Electron microscopic observations evidenced the morphological transformation of YVO₄:Eu³⁺ powders from rhombus-like microstructure to rod-, soya bean, and aggregated soya bean-like nanostructures with an increase in the pH of the synthesis solution. The results from the PL measurements revealed that the intensities of PL emission peaks were significantly affected by the morphologies and crystallinity of samples due to the absence of an inversion symmetry at the Eu³⁺ lattice site, and the highest luminescence intensity was observed for rod-like YVO₄:Eu³⁺ powders.