Neutral copper(I) phosphorescent complexes from their ionic counterparts with 2-(2'-quinolyl)benzimidazole and phosphine mixed ligands

Neutral mononuclear Cu(I) complexes and their counterparts with counterion, i.e. Cu(qbm)(PPh(3))(2), Cu(qbm)(DPEphos), [Cu(Hqbm)(PPh(3))(2)](BF(4)) and [Cu(Hqbm)(DPEphos)](BF(4)), where Hqbm = 2-(2'-quinolyl)benzimidazole, DPEphos = bis[2-(diphenylphosphino)phenyl]ether, have been synthesized and characterized by X-ray structure analyses. All of the four complexes in solid state exhibit a strong phosphorescence band in the orange spectral region at room temperature. The photophysical properties of these complexes in both methylene chloride solution and poly(methyl methacrylate) film have been studied. Compared to the related cationic complexes, the neutral ones show blue-shifted emissions and longer lifetimes that can be attributed to the additional ligand-centered π-π* transition beside traditional metal-to-ligand charge-transfer (MLCT). By doping these complexes in N-(4-(carbazol-9-yl)phenyl)-3,6-bis(carbazol-9-yl) carbazole (TCCz), multilayer organic light-emitting diodes (OLEDs) were fabricated with the device structure of ITO/PEDOT/TCCz: Cu(I) (10 wt%)/BCP/Alq(3)/LiF/Al. The neutral complex Cu(qbm)(DPEphos) exhibits a higher current efficiency, up to 8.87 cd A(-1), than that (5.58 cd A(-1)) of its counterpart [Cu(Hqbm)(DPEphos)](BF(4)).     

Copper(I) complexes of bis(2-(diphenylphosphino)phenyl) ether: synthesis, reactivity, and theoretical calculations

The tricoordinated cationic Cu(I) complex [Cu(kappa2-P,P'-DPEphos)(kappa1-P-DPEphos)][BF4] (1) (DPEphos = bis(2-(diphenylphosphino)phenyl) ether) containing a dangling phosphorus center was synthesized from the reaction of [Cu(CH3CN)4][BF4] with DPEphos in a 1:2 molar ratio in dichloromethane. When complex 1 is treated with MnO2, elemental sulfur, or selenium, the uncoordinated phosphorus atom undergoes oxidation to form a P=E bond resulting in the formation of complexes of the type [Cu(kappa2-P,P'-DPEphos)(kappa2-P,E-DPEphos-E)][BF4] (2, E = O; 3, E = S; 4, E = Se) containing a Cu-E bond. The zigzag polymeric CuI complex [Cu(kappa2-P,P'-DPEphos)(micro-4,4'-bpy)]n[BF4]n (5) was prepared by the reaction of [Cu(CH3CN)4][BF4] with DPEphos and 4,4'-bipyridine in an equimolar ratio. The stereochemical influences of DPEphos on its coordination behavior are examined by density functional theory calculations.     

Synthesis and structural characterization of Cu(I) and Ni(II) complexes that contain the bis[2-(diphenylphosphino)phenyl]ether ligand. Novel emission properties for the Cu(I) species

The pseudotetrahedral complexes [Cu(NN)(DPEphos)]BF(4), where DPEphos = bis[2-(diphenylphosphino)phenyl]ether and NN = 1,10-phenanthroline (1), 2,9-dimethyl-1,10-phenanthroline (2), 2,9-di-n-butylphenanthroline (3), or two dimethylcyanamides (4), and NiCl(2)(DPEphos) (5) have been synthesized and structurally characterized by X-ray crystallography and their solution properties examined by use of a combination of cyclic voltammetry, NMR spectroscopy, and electronic absorption spectroscopy. Complexes 1-4 possess a reversible Cu(II)/Cu(I) couple at potentials upward of +1.2 V versus Ag/AgCl. Compounds 1-3 exhibit extraordinary photophysical properties. In room-temperature dichloromethane solution, the charge-transfer excited state of the dmp (dbp) derivative exhibits an emission quantum yield of 0.15 (0.16) and an excited-state lifetime of 14.3 mus (16.1 mus). Coordinating solvents quench the charge-transfer emission to a degree, but the photoexcited dmp complex 2 retains a lifetime of over a microsecond in acetone, methanol, and acetonitrile.     

Neutral cuprous complexes as ratiometric oxygen gas sensors

Four neutral mononuclear Cu(I) complexes, [Cu(pyin)(PPh(3))(2)] (1a), [Cu(pyin)(DPEphos)] (1b), [Cu(quin)(PPh(3))(2)] (2a) and [Cu(quin)(DPEphos)] (2b) (Hpyin = 2-(2-pyridyl)indole, Hquin = 2-(2-quinolyl)indole and DPEphos = bis(2-(diphenylphosphino)phenyl)ether) have been synthesized. X-Ray crystal structure analysis revealed that the central Cu(I) ion in all complexes is in a distorted tetrahedral coordination environment. All four complexes display the typical metal-to-ligand charge transfer (MLCT) absorption band at 371, 363, 413 and 402 nm, respectively. No emission was observed from any complexes in the solid state due to triplet-triplet annihilation. However, the complexes show unusual dual-emission originating from intraligand charge-transfer (ILCT) and MLCT transitions, when dispersed in a rigid matrix (e.g. PMMA) or in frozen CH(2)Cl(2). The oxidation potential of Cu(I)/Cu(II) in these neutral complexes, ～0.5 V (vs. Ag/AgCl), is lower than those of cationic Cu(I) complexes. Films containing 10 wt% of these complexes in PMMA shows ratiometric fluorescent oxygen gas sensing property with a response ratio of 0.3-3.2 and response time of 3-4 s. Complex 2b acts as a ratiometric oxygen gas sensor with good reversibility through energy and electron transfer mechanisms under the loss of a counteranion.     

Synthesis and characterization of neutral luminescent diphosphine pyrrole- and indole-aldimine copper(I) complexes

Heteroleptic copper(I) complexes of the types [Cu(N,N)(P,P)] and [Cu(N,O)(P,P)], where (P,P) = phosphine (PPh(3)) or diphosphine (dppb, DPEPHOS, XANTPHOS), (N,N) = pyrrole-2-phenylcarbaldimine, 2PyN: [Cu(2PyN)(PPh(3))(2)] (1), [Cu(2PyN) (dppb)] (2), [Cu(2PyN)(DPEPHOS)] (3), and [Cu(2PyN)(XANTPHOS)] (4), (N,N) = indole-2-phenylcarbaldimine, 2IndN: [Cu(2IndN)(DPEPHOS)] (8), and (N,O) = pyrrole-2-carboxaldehyde, 2PyO: [Cu(2PyO)(DPEPHOS)] (5), [Cu(2PyO)(XANTPHOS)] (6), or (N,O) = indole-2-carboxaldehyde, 2IndO: [Cu(2IndO)(DPEPHOS)] (7), were synthesized and characterized by multinuclear NMR spectroscopy, electronic absorption spectroscopy, fluorescence spectroscopy, and X-ray crystallography (1-3, 5-8). The complexes with aldimine ligands are thermally stable, and sublimation of 2-4 was possible at T = 230-250 °C under vacuum. All complexes exhibit long-lived emission in solution, in the solid state, and in frozen glasses. The excited states have been assigned as mixed intraligand and metal-to-ligand charge transfer (3)(MLCT + π-π*) transitions through analysis of the photophysical properties and DFT calculations on representative examples.     

New phosphorescent polynuclear Cu(I) compounds based on linear and star-shaped 2-(2'-pyridyl)benzimidazolyl derivatives: syntheses, structures, luminescence, and electroluminescence

Four dinuclear and trinuclear Cu(I) complexes that contain 2-(2'-pyridyl)benzimidazolyl derivative ligands including 1,4-bis[2-(2'-pyridyl)benzimidazolyl]benzene (1,4-bmb), 1,3-bis[2-(2'-pyridyl)benzimidazolyl]benzene (1,3-bmb), 1,3,5-tris[2-(2'-pyridyl)benzimidazolyl]benzene (tmb), and 4,4'-bis[2-(2'-pyridyl)benzimidazolyl]biphenyl (bmbp) have been synthesized. The formulas of these complexes are [Cu(2)(1,4-bmb)(PPh(3))(4)][BF(4)](2) (1), [Cu(2)(1,3-bmb)(PPh(3))(4)][BF(4)](2) (2), [Cu(3)(tmb)(PPh(3))(6)][BF(4)](3) (3), and [Cu(2)(bmbp)(PPh(3))(4)][BF(4)](2) (4), respectively. The crystal structures of 2-4 have been determined by single-crystal X-ray diffraction analyses. The Cu(I) ions in the complexes have a distorted tetrahedral geometry. For 3, two structural isomers (syn and anti) resulted from two different orientations of the three 2-(2'-pyridyl)benzimidazolyl chelating units were observed in the crystal lattice. Variable-temperature (1)H NMR experiments established the presence of syn and anti isomers for 1-3 in solution which interconvert at ambient temperature. Complexes 1-4 have a weak MLCT absorption band in the 350-450 nm region and display a yellow-orange emission when irradiated by UV light. One unexpected finding is that the yellow-orange emission of complexes 1-4 has a very long decay lifetime (approximately 200 micros) at 77 K. An electroluminescent (EL) device using 4 as the emitter and PVK as the host was fabricated. However, the long decay lifetime of the copper complexes may limit their applications as phosphorescent emitters in EL devices.     

Synthesis,Crystal Structure and Photophysical Properties of Cu（Ⅰ） Complexes Containing 2,5-Bis（pyridyl）-1,3,4-oxadiazole

Four novel Cu(Ⅰ) complexes,[Cu(o-PYO)(PPh3)2]BF4(1),[Cu(o-PYO)(DPEphos)]BF4(2),[Cu2 (o-PYO)(PPh3)3(CH3CN)](BF4)2(3) and [Cu2(o-PYO)(DPEphos)2 ](BF4)2(4) (o-PYO=2,5bis(pyridyl)-1,3,4-oxadiazole,PPh 3=triphenylphosphine,DPEphos=bis(2-(diphenylphosphanyl)phenyl)ether),have been synthesized and characterized by 1 H NMR,elemental analysis and single-crystal X-ray diffraction.The central cuprous ions in all complexes are surrounded by N and P atoms to form a distorted tetrahedral geometry,although one of the cuprous ions in complex 3 is coordinated by a PPh3 and an acetonitrile molecule due to the steric hindrance and weak coordination ability from monodentate PPh3 ligand.The UV-vis absorption spectra in CH2Cl2 show the characteristic metal-to-ligand charge transfer (MLCT) absorption bands in the region of 360-480nm.Four Cu(I) complexes exhibit yellow to orange-red phosphorescence with the emission maximum at 572,577,562 and 597nm,respectively in the solid state.     

Synthesis, structural characterization and luminescent properties of a series of Cu(I) complexes based on polyphosphine ligands

A series of Cu(I) complexes with a [Cu(NN)(PP)](+) moiety, [Cu(phen)(pba)](BF(4)) (1a), [Cu(2)(phen)(2)(pbaa)](BF(4))(2) (2a), [Cu(2)(phen)(2)(pnaa)](BF(4))(2) (3a), [Cu(2)(phen)(2)(pbbaa)](BF(4))(2) (4a), [Cu(dmp)(pba)](BF(4)) (1b), [Cu(2)(dmp)(2)(pbaa)](BF(4))(2) (2b), [Cu(2)(dmp)(2)(pnaa)](BF(4))(2) (3b) and [Cu(2)(dmp)(2)(pbbaa)](BF(4))(2) (4b) (phen = 1,10-phenanthroline, dmp = 2,9-dimethyl-1,10-phenanthroline, pba = N,N-bis((diphenylphosphino)methyl)benzenamine, pbaa = N,N,N',N'-tetrakis((diphenylphosphino)methyl)benzene-1,4-diamine, pnaa = N,N,N',N'-tetrakis((diphenylphosphino)methyl)naphthalene-1,5-diamine and pbbaa = N,N,N',N'-tetrakis((diphenylphosphino)methyl)biphenyl-4,4'-diamine), were rationally designed and synthesized. These complexes were characterized by (1)H and (31)P NMR, electrospray mass spectrometry, elemental analysis and X-ray crystal structure analysis. Introduction of different central arene spacers (phenyl, naphthyl, biphenyl) into ligands, resulting in the size variation of these complexes, aims to tune the photophysical properties of the complexes. Each Cu(I) ion in these complexes adopts a distorted tetrahedral geometry constructed by the chelating diimine and phosphine groups. Intermolecular C-H···π and/or π···π interactions are involved in the solid states. The dmp-containing complex exhibits better emission relative to the corresponding phen complex due to the steric encumbrance of bulky alkyl groups. Furthermore, for complexes with identical diimine but different phosphine ligands, the tendency of increased emission lifetime as well as blue-shifted emission in the solid state follows with the decrease in size of complexes. Intermolecular C-H···π interactions have an influence on the final solid state photophysical properties through vibrationally relaxed non-radiative energy transfer in the excited state. Smaller-sized complexes show better photophysical properties due to less vibrationally relaxed behavior related to flexible C-H···π bonds. Nevertheless, the tendency for increased quantum yield and emission lifetime, as well as blue-shifted emission in dilute solution goes with the increase in size of complexes. The central arene ring (phenyl, naphthyl or biphenyl) has an influence on the final photophysical properties. The larger the π-conjugated extension of central arene ring is, the better the photophysical properties of complex are. The rigid and large-sized complex 3b, with a high quantum yield and long lifetime, is the best luminophore among these complexes.     

Formation of [PtPd(2)(mu(3)-X)(2)(P-P)(dppmX)(2)](2+) (X = S, Se; P-P = dppe, 2 x PPh(3)) aggregates through activation of the chalcogen-rich [PtX(4)] ring by a Pd(I)-Pd(I) bond

Redox addition of the Pd-Pd bond in [Pd(2)Cl(2)(dppm)(2)] across S-S or Se-Se bond in [Pt(X(4)-kappa(2)X(1),X(4))(P-P)] (X = S, Se; P-P = dppe or 2 x PPh(3); dppm = bis(diphenylphosphino)methane, dppe = bis(diphenylphosphino)ethane) leads to the isolation of [PtPd(2)(mu(3)-X)(2)(P-P)(dppmX-kappa(2)X,P(4))(2)](2+) and represents an atom-economy process that converts chalcogen-rich complexes to heterometallic chalcogenide aggregates. Activation of the [PtX(4)] ring is achieved by tetrachalcogenide reduction and dual oxidation of palladium and phosphine.     

Synthesis, structures and photophysical properties of luminescent copper(I) and platinum(II) complexes with a flexible naphthyridine-phosphine ligand

Condensation of Ph(2)PH and paraformaldehyde with 2-amino-7-methyl-1,8-naphthyridine gave the new flexible tridentate ligand 2-[N-(diphenylphosphino)methyl]amino-7-methyl-1,8-naphthyridine (L). Reaction of L with [Cu(CH(3)CN)(4)]BF(4) and/or different ancillary ligands in dichloromethane afforded N,P chelating or bridging luminescent complexes [(L)(2)Cu(2)](BF(4))(2), [(micro-L)(2)Cu(2)(PPh(3))(2)](BF(4))(2) and [(L)Cu(CNN)]BF(4) (CNN = 6-phenyl-2,2'-bipyridine), respectively. Complexes [(L)(2)Pt]Cl(2), [(L)(2)Pt](ClO(4))(2) and [(L)Pt(CNC)]Cl (CNC = 2,6-biphenylpyridine) were obtained from the reactions of Pt(SMe(2))(2)Cl(2) or (CNC)Pt(DMSO)Cl with L. The crystal structures and photophysical properties of the complexes are presented.     

Synthesis and structural characterisation of (aryl-BIAN)copper(I) complexes and their application as catalysts for the cycloaddition of azides and alkynes

A series of Ar-BIAN-based copper(I) complexes (where Ar-BIAN = bis(aryl)acenaphthenequinonediimine) were synthesised and characterised by (1)H and (13)C NMR spectroscopies, FT-IR spectroscopy, MALDI-TOF-MS spectrometry, cyclic voltammetry and single crystal X-ray diffraction. The bis-chelated complexes of general formula [Cu(Ar-BIAN)(2)]BF(4) (where Ar = C(6)H(5) (1), 4-iPrC(6)H(4) (3), 2-iPrC(6)H(4) (4)) were prepared by reaction of [Cu(NCMe)(4)]BF(4) with two equivalents of the corresponding Ar-BIAN ligands, in dichloromethane, while the mono-chelated complexes of the type [Cu(Ar-BIAN)L(2)]BF(4) (where Ar = 2,6-iPr(2)C(6)H(3), L = PhCN (6); Ar = 4-iPrC(6)H(4), L = PPh(3) (7)) were readily accessible by treatment of [Cu(NCR)(4)]BF(4) (R = Me, Ph) with one equivalent of the corresponding Ar-BIAN ligands in the absence or presence of two equivalents of PPh(3), in the same solvent. The structures of complexes 3, 4, 6 and 7 were obtained by single crystal X-ray diffraction, showing distorted tetrahedral geometries around the copper centres in all cases. The electrochemical studies of these complexes and of the already reported [Cu(2,4,6-Me(3)C(6)H(2)-BIAN)(2)]BF(4) (2) and [Cu(2,6-iPr(2)C(6)H(3)-BIAN)(NCMe)(2)] (5), demonstrated that the bis-chelated complexes 1-4 undergo a reversible one-electron reduction or oxidation processes on copper, while the mono-chelated complexes 5-7 show a partially reversible oxidation and an irreversible reduction feature. Both kinds of (Ar-BIAN)copper(I) complexes are active catalysts for the copper(I)-catalysed azide-alkyne cycloaddition reaction (CuAAC). Complex 7, bearing PPh(3) ligands, exhibits the highest catalytic activity, which is comparable with that of the typical CuSO(4)-sodium ascorbate catalyst system.     

Mononuclear and binuclear copper(I) complexes ligated by bis(3,5-diisopropyl-1-pyrazolyl)methane: insight into the fundamental coordination chemistry of three-coordinate copper(I) complexes with a neutral coligand

By using the neutral bidentate nitrogen-containing ligand, bis(3,5-diisopropyl-1-pyrazolyl)methane (L1' '), the copper(I) complexes [Cu(L1' ')2](CuCl2) (1CuCl2), [Cu(L1' ')2](ClO4) (1ClO4), [Cu(L1' ')]2(ClO4)2 (2ClO4), [Cu(L1' ')]2(BF4)2 (2BF4), [Cu(L1' ')(NCMe)](PF6) (3PF6), [Cu(L1' ')(PPh3)](ClO4) (4ClO4), [Cu(L1' ')(PPh3)](PF6) (4PF6), [{Cu(L1' ')(CO)}2(mu-ClO4)](ClO4) (5ClO4), and the copper(II) complexes [{Cu(L1' ')}2(mu-OH)2(mu-ClO4)2] (6), and [Cu(L1' ')Cl2] (7) were systematically synthesized and fully characterized by X-ray crystallography and by IR and 1H NMR spectroscopy. In the case of copper(II), ESR spectroscopy was also applied. In comparison with the related neutral tridentate ligand L1', bis-chelated copper(I) complexes and binuclear linear-coordinated copper(I) complexes are easy to obtain with L1' ', like 1CuCl2, 1ClO4, 2ClO4, and 2BF4. Importantly, stronger and bulkier ligands such as acetonitrile (3PF6) and especially triphenylphosphine (4ClO4 and 4PF6) generate three-coordinate structures with a trigonal-planar geometry. Surprisingly, for the smaller ligand carbon monoxide, a mononuclear three-coordinate structure is very unstable, leading to the formation of a binuclear complex (5ClO4) with one bridging perchlorate anion, such that the copper(I) centers are four-coordinate. The same tendency is observed for the copper(II) bis(mu-hydroxo) compounds 6, which is additionally bridged by two perchlorate anions. Both copper(II) complexes 6 and 7 were obtained by molecular O2 oxidation of the corresponding copper(I) complexes. A comparison of the new copper(I) triphenylphosphine complexes 4ClO4 and 4PF6 with corresponding species obtained with the related tridentate ligands L1' and L1 (8ClO4 and 9, respectively) reveals surprisingly small differences in their spectroscopic properties. Density functional theory (DFT) calculations are used to shed light on the differences in bonding in these compounds and the spectral assignments. Finally, the reactivity of the different bis(pyrazolyl)methane complexes obtained here toward PPh3, CO, and O2 is discussed.     

Photoexcitation in Cu(I) and Re(I) complexes containing substituted dipyrido[3,2-a:2',3'-c]phenazine: a spectroscopic and density functional theoretical study

Copper(I) and rhenium(I) complexes [Cu(PPh(3))(2)(dppz-11-COOEt)]BF(4), [Cu(PPh(3))(2)(dppz-11-Br)]BF(4), [Re(CO)(3)Cl(dppz-11-COOEt)] and [Re(CO)(3)Cl(dppz-11-Br)] (dppz-11-COOEt = dipyrido-[3,2a:2',3'c]phenazine-11-carboxylic ethyl ester, dppz-11-Br = 11-bromo-dipyrido[3,2a:2',3'c]-phenazine) have been studied using Raman, resonance Raman, and transient resonance Raman (TR(2)) spectroscopy, in conjunction with computational chemistry. DFT (B3LYP) frequency calculations with a 6-31G(d) basis set for the ligands and copper(I) centers and an effective core potential (LANL2DZ) for rhenium in the rhenium(I) complexes show close agreement with the experimental nonresonance Raman spectra. Modes that are phenazine-based, phenanthroline-based, and delocalized across the entire ligand structure were identified. The nature of the absorbing chromophores at 356 nm for ligands and complexes was established using resonance Raman spectroscopy in concert with vibrational assignments from calculations. This analysis reveals that the dominant chromophore for the complexes measured at 356 nm is ligand-centered (LC), except for [Re(CO)(3)Cl(dppz-11-Br)], which appears to have additional chromophores at this wavelength. Calculations on the reduced complexes, undertaken to model the metal-to-ligand charge transfer (MLCT) excited state, show that the reducing electron occupies a ligand MO that is delocalized across the ligand structure. Resonance Raman spectra (lambda(exc) = 514.5 nm) of the reduced rhenium complexes show a similar spectral pattern to that observed in [Re(CO)(3)Cl(dppz)](*-); the measured bands are therefore attributed to ligand radical anion modes. These bands lie at 1583-1593 cm(-1) for [Re(CO)(3)Cl(dppz-11-COOEt)] and 1611 cm(-1) for [Re(CO)(3)Cl(dppz-11-Br)]. The thermally equilibrated excited states are examined using nanosecond-TR(2) spectroscopy (lambda(exc) = 354.7 nm). The TR(2) spectra of the ligands provide spectral signatures for the (3)LC state. A band at 1382 cm(-1) is identified as a marker for the (3)LC states of both ligands. TR(2) spectra of the copper and rhenium complexes of dppz-11-Br show this (3)LC band, but it is not prominent in the spectra of [Cu(PPh(3))(2)(dppz-11-COOEt)](+) and [Re(CO)(3)Cl(dppz-11-COOEt)]. Calculations suggest that the lowest triplet states of both of the rhenium(I) complexes and [Cu(PPh(3))(2)(dppz-11-Br)](+) are metal-to-ligand charge transfer in nature, but the lowest triplet state of [Cu(PPh(3))(2)(dppz-11-COOEt)](+) appears to be LC in character.     

Ruthenium(II) complexes containing bis(2-(diphenylphosphino)phenyl) ether and their catalytic activity in hydrogenation reactions

The half-sandwich complexes [(eta5-C5H5)RuCl(DPEphos)] (1) and [{(eta6-p-cymene)RuCl2}2(mu-DPEphos)] (2) were synthesized by the reaction of bis(2-(diphenylphosphino)phenyl) ether (DPEphos) with a mixture of ruthenium trichloride trihydrate and cyclopentadiene and with [(eta6-p-cymene)RuCl2]2, respectively. Treatment of DPEphos with cis-[RuCl2(dmso)4] afforded fac-[RuCl2(kappa3-P,O,P-DPEphos)(dmso)] (3). The dmso ligand in 3 can be substituted by pyridine, 2,2'-bipyridine, 4,4'-bipyridine, and PPh3 to yield trans,cis-[RuCl2(DPEphos)(C5H5N)2] (4), cis,cis-[RuCl2(DPEphos)(2,2'-bipyridine)] (5), trans,cis-[RuCl2(DPEphos)(mu-4,4'-bipyridine)]n (6), and mer,trans-[RuCl2(kappa3-P,P,O-DPEphos)(PPh3)] (7), respectively. Refluxing [(eta6-p-cymene)RuCl2]2 with DPEphos in moist acetonitrile leads to the elimination of the p-cymene group and the formation of the octahedral complex cis,cis-[RuCl2(DPEphos)(H2O)(CH3CN)] (8). The structures of the complexes 1-5, 7, and 8 are confirmed by X-ray crystallography. The catalytic activity of these complexes for the hydrogenation of styrene is studied.     

Group 11 complexes containing the [C5(CN)5]- ligand; 'coordination-analogues' of molecular organometallic systems

The reactions of Na[C(5)(CN)(5)] (Na[1]) with group 11 phosphine complexes [(P)(n)MCl] (M = Cu, Ag, Au, P = Ph(3)P; M = Cu, P = dppe (Ph(2)PCH(2)CH(2)PPh(2))] give a range of compounds containing the pentacyanocyclopentadienide ligand, [C(5)(CN)(5)](-) (1). The new complexes [(Ph(3)P)(2)M{1}](2) [M = Cu (3); M = Ag (5)], [(Ph(3)P)(3)Ag{1}] (4), [(dppe)(3)Cu(2){1}(2)] (6) and [Au(PPh(3))(2)][1] (7) include the first complete series of group 11 complexes of any cyclopentadienide ligand to be structurally characterised.     

Highly luminescent gold(I)-silver(I) and gold(I)-copper(I) chalcogenide clusters

The reactions of [AuClL] with Ag(2)O, where L represents the heterofunctional ligands PPh(2)py and PPh(2)CH(2)CH(2)py, give the trigoldoxonium complexes [O(AuL)(3)]BF(4). Treatment of these compounds with thio- or selenourea affords the triply bridging sulfide or selenide derivatives [E(AuL)(3)]BF(4) (E=S, Se). These trinuclear species react with Ag(OTf) or [Cu(NCMe)(4)]PF(6) to give different results, depending on the phosphine and the metal. The reactions of [E(AuPPh(2)py)(3)]BF(4) with silver or copper salts give [E(AuPPh(2)py)(3)M](2+) (E=O, S, Se; M=Ag, Cu) clusters that are highly luminescent. The silver complexes consist of tetrahedral Au(3)Ag clusters further bonded to another unit through aurophilic interactions, whereas in the copper species two coordination isomers with different metallophilic interactions were found. The first is analogous to the silver complexes and in the second, two [S(AuPPh(2)py)(3)](+) units bridge two copper atoms through one pyridine group in each unit. The reactions of [E(AuPPh(2)CH(2)CH(2)py)(3)]BF(4) with silver and copper salts give complexes with [E(AuPPh(2)CH(2)CH(2)py)(3)M](2+) stoichiometry (E=O, S, Se; M=Ag, Cu) with the metal bonded to the three nitrogen atoms in the absence of AuM interactions. The luminescence of these clusters has been studied by varying the chalcogenide, the heterofunctional ligand, and the metal.     

Synthesis and photophysical studies of calix[4]arene-based binuclear platinum(II) complexes: probing metal-metal and ligand-ligand interactions

A series of calix[4]arene-based binuclear platinum(II) complexes, Pt2LCl2 (1, L = 5,11,17,23-tetra- tert-butyl-25,27-di[methoxy(4-phenyl)-(C;N;N)]-26,28-dihydroxycalix[4]arene, HC;N;N = 6-phenyl-2,2'-bipyridine), [Pt2L(mu-dppCn)](ClO4)2 (dppCn = bis(diphenylphosphino)-methane (2, n = 1), -ethane (3, n = 2), -propane (4, n = 3), and [Pt2L(PPh3)2](ClO4)2 (5), have been designed and synthesized in this work. Spectroscopic investigation demonstrates that p- tert-calix[4]arene is capable of assembling the two square-planar [(C;N;N)Pt(II)] units in a face-to-face manner, simultaneously suppressing intermolecular aggregation and increasing the solubility of the studied complexes. Facile replacement of the chloride ligand in 1 by the strongly sigma-donating ancillary phosphine ligands affords binuclear platinum(II) complexes with improved photophysical properties. All of the complexes are emissive both in the fluid/glassy solution and in the solid state, except for 1 in the solid state at room temperature. Moreover, the absorption and emission energies of the complexes are sensitive to the ancillary ligands. Varying the tethered phosphine auxiliaries from dppm (2) and dppe (3) to dppp (4) and PPh3 (5) modulates the intramolecular metal-metal (Pt...Pt) and ligand-ligand (pi-pi) distances, thereby leading to a switch of 3MMLCT and excimeric 3(pipi*) excited states to a common 3MLCT excited state.     

Structural and electronic properties of luminescent copper(I) halide complexes of bis[2-(diphenylphosphano)phenyl] ether (DPEphos). Crystal structure of [CuCl(DPEphos)(dmpymtH

Heteroleptic copper(I) halide complexes containing the bis[2-(diphenylphosphano)phenyl]ether (DPEphos) ligand and the heterocyclic thioamides pyridine-2(1H)-thione (py2SH), pyrimidine-2(1H)-thione (pymtH) or 4,6-dimethylpyrimidine-2(1H)-thione (dmpymtH) have been synthesized and characterized by (1)H-NMR, IR spectroscopy, elemental analyses and melting point determinations. The complexes can be readily obtained by the addition of the thione ligand to a CuX-diphosphane adduct in dichloromethane-ethanol solution. The molecular structure of [CuCl(DPEphos)(dmpymtH)] complex has been established by single-crystal X-ray diffraction. The structure features a tetrahedral copper(I) center with two phosphorus atoms from the chelating diphos ligand, one halogen atom and the exocyclic sulfur atom of the heterocyclic thioamide unit. The complexes are strongly emissive in the solid state at ambient temperature. DFT and TD-DFT calculations were employed to study the structural, electronic and photophysical properties of the novel complexes. Electronic absorption spectra show two broad bands in the regions 275-290 and 380-398 nm of mixed MLCT/IL character. Intense blue-green emission is observed in the region 500-558 nm for complexes having py2SH or dmpymtH thione ligands. The emitting first triplet excited state, T(1) is mainly localized on the thione ligand.     

Photoluminescent copper(I) complexes with amido-triazolato ligands

A series of heteroleptic copper(I) complexes incorporating amido-triazole and diphosphine ligands, [Cu(I)(N-phenyl-2-(1-phenyl-1H-1,2,3-triazol-4-yl)aniline)(dppb)] (1), [Cu(I)(N-(4-methylphenyl)-2-(1-phenyl-1H-1,2,3-triazol-4-yl)aniline)(dppb)] (2), [Cu(I)(N-(4-methoxyphenyl)-2-(1-phenyl-1H-1,2,3-triazol-4-yl)aniline)(dppb)] (3), [Cu(I)(N-(4-chlorophenyl)-2-(1-phenyl-1H-1,2,3-triazol-4-yl)aniline)(dppb)] (4), [Cu(I)(2,6-dimethyl-N-[2-(1-phenyl-1H-1,2,3-triazol-4-yl)phenyl]aniline)(dppb)] (5), [Cu(I)(2,6-dimethyl-N-[2-(1-benzyl-1H-1,2,3-triazol-4-yl)phenyl]aniline)(dppb)] (6), (dppb = 1,2-bis(diphenylphosphino)benzene), have been prepared. The complexes adopt a distorted tetrahedral geometry in the solid state with the amido-triazole ligand forming a six-member ring with the Cu(I) ion. The complexes exhibit long-lived photoluminescence with colors ranging from yellow to red-orange in the solid state, in frozen glass at 77 K, and in fluid solution with modest quantum yields of up to 0.022. Electrochemically, complexes 1-4 show irreversible oxidation waves while 5 and 6 are characterized by quasi-reversible oxidations as determined by cyclic voltammetry. For 1-4, the emission energy and oxidation potential are found to vary linearly with the Hammett parameter σ(p) of the substituent in the para position of the amido ligand, while in 5 and 6, large differences in emission are observed because of the nature of N3 substitution in the triazole ring. Density functional theory calculations have been performed on the singlet ground states (S(o)) of all complexes at the BP86/6-31G(d) level to assist in assignment of the excited states. On the basis of both experimental and computational results, we have assigned the excited states as intraligand + metal-to-ligand charge transfer (3)(ILCT+MLCT) or ligand-to-ligand charge transfer mixed with MLCT (3)(MLCT +LLCT) in these complexes.     

Mixed dinitrogen-organocyanamide complexes of molybdenum(0) and their protic conversion into hydrazide and amidoazavinylidene derivatives

Organocyanamides, Ntbd1;CNR(2) (R = Me or Et), react with trans-[Mo(N(2))(2)(dppe)(2)] (1, dppe = Ph(2)PCH(2)CH(2)PPh(2)), in THF, to give the first mixed molybdenum dinitrogen-cyanamide complexes trans-[Mo(N(2))(NCNR(2))(dppe)(2)] (R = Me 2a or Et 2b) which are selectively protonated at N(2) by HBF(4) to yield the hydrazide(2-) complexes trans-[Mo(NNH(2))(NCNR(2))(dppe)(2)][BF(4)](2) (R = Me, 3a, or Et, 3b). On treatment with Ag[BF(4)], oxidation and metal fluorination occur, and the ligating cyanamide undergoes an unprecedented beta-protonation at the unsaturated C atom to form trans-[MoF(NCHNR(2))(dppe)(2)][BF(4)](2) (R = Me, 4a, or Et, 4b) compounds which present the novel amidoazavinylidene (or amidomethyleneamide) ligands. Complexes 4 are also formed from the corresponding compounds 3, with liberation of ammonia and hydrazine. The crystal structure of 2b was determined by single-crystal X-ray diffraction analysis which indicates that the N atom of the amide group has a trigonal planar geometry.