Organocobalt chelates as initiators of emulsion polymerization of styrene

The kinetics of decomposition of organocobalt chelates in the pH range of 2.2–7.0 has been studied. It has been shown that the rate constant of decomposition of the octyl chelate complex at 20°C changes from ～3 × 10^?3 to ～6 × 10^?6 s^?1 in the above pH range. The rate constants of decomposition of complexes with ethyl, octyl, and cetyl ligands, as estimated at 20°C and pH 8.3, are 1.69 × 10^?4, 1.39 × 10^?4, and 2.42 × 10^?5 s^?1, respectively. As evidenced by emission spectrometry measurements, ～100% of organocobalt chelates with ethyl and isopropyl ligands occur in the aqueous phase, while organocobalt chelates with octyl and cetyl ligands are partitioned between monomer and aqueous phases. The rates of initiation of the emulsion polymerization of styrene have been measured by the inhibited polymerization procedure. It has been demonstrated that among three tested compounds (diphenyl picryl hydrazyl, hydroquinone, and benzoquinone), benzoquinone has been found to be a suitable inhibitor for the polymerization under study. The rates of initiation of styrene polymerization at 30°C for organocobalts with ethyl, octyl, and cyclohexyl ligands are 1.0 × 10^?7, 1.04 × 10^?7, and 3.7 × 10^?6 mol/(l s), respectively. The rate constant of decomposition of the organocobalt complex with the octyl ligand at 30°C is 2.28 × 10^?5 s^?1, and the efficiency of initiation with this complex is 0.95.     

一种新型用于原子转移自由基聚合过程的Cu(I)络合物的研究

将以三齿2,6 双(苯并咪唑)吡啶为配体的Cu(I)离子络合物用作A TRP引发体系的组分之一,并成功地实现了对烯类单体的自由基聚合.聚合过程具有明显的ATRP聚合特征.和几种具不同结构胺配体构成的Cu(I)络合物的聚合速度结果相比较,本工作的结果基本符合烷基胺≈吡啶>亚胺>芳基胺的序列关系.     

Binuclear Aluminum Complexes Supported by Linked Bis(β-diketiminate) Ligands for Ring-Opening Polymerization of Cyclic Esters

Binuclear aluminum alkyl complexes 2a–4g supported by linked bis(β-diketiminate) ligands were synthesized via the reaction of AlEt_3 or AlMe_3 and the corresponding proligand in a 2:1 molar ratio with moderate yields. The isolated complexes were well-characterized by ~1H-NMR, ~(13)C-NMR and elemental analysis. The binuclear nature of aluminum complex 2b was further confirmed by an X-ray diffraction study. All complexes 2a–4g could efficiently initiate the ring-opening polymerization(ROP) of ε-caprolactone in toluene. The substituents at the aromatic rings and the linker unit in the auxiliary ligands exerted significant influence on the catalytic behavior of the investigated aluminum complexes. Complex 4g(R~1 = R~2 = Cl) containing propylenyl bridging unit exhibited the highest catalytic activity among these complexes, which might be attributed to the increased electrophilicity of the metal center as well as more opened coordination sphere. The molecular weights of obtained poly(ε-caprolactone)s deviating considerably from the theoretical values indicated that the ROP of ε-caprolactone by complexes 2a–4g was not well-controlled, which was also judged from the broad molecular weight distributions(MWD = 1.47-2.47) of produced poly(ε-caprolactone)s. These complexes proved to be inactive toward the polymerization of rac-lactide alone. In the presence of alcohol the polymerization occurred, which was actually initiated by the decomposition species of the aluminum complex upon the treatment with isopropanol.     

(Imido)vanadium(V)‐alkyl,Alkylidene Complexes Exhibiting Unique Reactivities towards Olefins,Phenols, and Benzene via 1,2‐C‐H Bond Activation

Recent examples for synthesis and reaction chemistry with (imido)vanadium(V)‐alkyl, ‐alkylidene complexes have been briefly summarized. (Arylimido)vanadium(V) dichloride complexes especially containing aryloxo ligands exhibited notable activities for ethylene polymerization, and the reacition pathways for the polymerization/dimerization using (imido)vanadium(V) dichloride complexes containing (2‐anilidomethyl)pyridine ligands can be tuned by modification of the steric bulk in the imido substituents; the adamantylimido analogues exhibited exceptionally high both activity and selectivity in the dimerization. These vanadium(V)‐alkyl complexes showed unique reactivity toward phenols; the reaction proceeds via coordination of phenols to the vanadium. The vanadium(V)‐alkylidene complexes were generated by α‐hydrogen elimination from the dialkyl analogues in the presence of PMe₃ etc.; the subsequent 1,2‐C‐H bond activation of benzene with (arylimido)vanadium(V)‐alkylidene containing 1,3‐(2′,6′‐diiso‐propylphenyl)imidazolin‐2‐iminato (Im^DIPPN) ligand took place cleanly.     

Oligomeric cadmium-phthalocyanine complexes: novel supramolecular free radical structures

Certain cadmium-metallated phthalocyanines give rise to EPR active triple-decker sandwich complexes containing two Cd ions and three phthalocyanine (Pc) ligands. These have been shown to form when the ligands bear either eight non- peripheral alkyl or alkenyl substituents or eight peripheral 2-ethylhexyl groups. They can be derived either from three equivalents of a cadmium phthalocyanine precursor or from a 2:1 mixture of a cadmium phthalocyanine (CdPc) and a metal-free phthalocyanine (H(2)Pc). The mode of their formation has been investigated by a series of "cross" experiments. The results indicate that the triple-decker structures are formed by a self-assembly process. This is deduced from results that show that they can disassemble and reassemble with incorporation of differently substituted ligands derived from either an H(2)Pc or CdPc. The reassembled structures in these cross experiments can contain more than one ligand that originated from either the added CdPc or, and more surprisingly, the H(2)Pc compound. Mass spectrometry has also established that higher order oligomers can be formed when steric requirements between the alkyl substituents on adjacent rings in the stack are reduced. Thus an isotopic cluster for a Cd(5)Pc(6) complex has been observed when the eight peripheral substituents are hexyl chains and tetrameric complexes are formed when two different ligands are incorporated within a stack, with one carrying substituents at the peripheral sites and the other bearing substituents at the non-peripheral sites.     

2-AMINOMETHYLPYRIDINE NICKEL(Ⅱ) COMPLEXES—SYNTHESIS,MOLECULAR STRUCTURE AND CATALYSIS OF ETHYLENE POLYMERIZATION

A series of new nickel(Ⅱ)complexes with 2-aminomethylpyridine ligands,(2-PyCH_2NHAr)_2NiBr_2(Ar=2,6- dimethylphenyl 2a;2,6-diisopropylphenyl 2b,2,6-difluorophenyl 2c),have been synthesized and used as catalyst precursors for ethylene polymerization in the presence of methylaluminoxane(MAO).The catalysts containing ortho-alkyl-substituents afford high molecular weight branched polyethylenes as well as a certain amount of oligomers.Enhancing the steric bulk of the alkyl substituent of the catalyst resulted...     

Probing the steric limits of rhodium catalyzed hydrophosphinylation. P-H addition vs. dimerization/oligomerization/polymerization

The reactivity of secondary phosphine oxides containing bulky organic fragments in hydrophosphinylation reactions has been investigated using several rhodium based catalysts. Upon heating in a focused microwave reactor, HP(O)(2-C₆H₄Me)₂ adds to prototypical terminal alkynes affording a complex mixture containing 1,2 and 1,1-addition products. Addition of a second ortho-substituent (HP(O)Mes₂) completely suppresses the hydrophosphinylation reaction for alkyl and aryl substituted alkynes. Variations in the temperature, catalyst loading, solvent, and microwave power were unable to induce an addition reaction in the case of HP(O)Mes₂. While this secondary phosphine oxide did not participate in the hydrophosphinylation reaction, it promoted the polymerization of phenylacetylene. HP(O)R₂ substrates are not commonly thought of as innocent ligands for rhodium complexes in reactions involving alkynes due to facile hydrophosphinylation. While this is certainly true for diphenylphosphine oxide, the chemistry presented herein suggests that HP(O)Mes₂ and related bulky secondary phosphine oxides have great potential as valuable ligands for rhodium catalyzed transformations involving alkynes due to their lack of reactivity towards the addition reaction.     

Characterization of polymer monolithic stationary phases for capillary HPLC

Monolithic capillary columns have been prepared in fused‐silica capillaries by radical co‐polymerization of ethylene dimethacrylate and butyl methacrylate in the presence of porogen solvent mixtures containing various concentration ratios of 1‐propanol, 1,4‐butanediol, and water with azobisisobutyronitrile as the initiator of the polymerization reaction. The through pores in organic polymer monolithic columns can be characterized by “equivalent permeability particle size”, and the mesopores with stagnant mobile phase by “equivalent dispersion particle size”. Increasing the concentration of propanol in the polymerization mixture diminishes the pore volume and size in the monolithic media and improves the column efficiency, at a cost of decreasing permeability. Organic polymer monolithic capillary columns show similar retention behaviour to packed alkyl silica columns for compounds with different polarities characterized by interaction indices, I_x, but have different methylene selectivities. Higher concentrations of propanol in the polymerization mixture increase the lipophilic character of the monolithic stationary phases. Best efficiencies and separation selectivities were found for monolithic columns prepared using 62–64% propanol in the porogen solvent mixture. To allow accurate characterization of the properties of capillary monolithic columns, the experimental data should be corrected for extra‐column contributions.     

Synthesis of substituted polymethylenes by radical polymerization of alkyl N,N-dialkylfumaramates and maleamates: Relative reactivity of the isomers

Bulk polymerization of alkyl N,N-dialkylfumaramates (FAE) and maleamates (MAE) was performed in the presence of a radical initiator. It has been found that FAE is more reactive than MAE when the reactivity of the two geometrical isomers was compared for their homo- and copolymerizations. From investigation on the effect of ester and N-substituents of these monomers, it has been found that the isopropyl ester shows a higher reactivity than the methyl ester and that N-ethyl and n-butyl substitution gives polymers with high molecular weight of more than several thousands. The resulting substituted polymethylenes from FAE and MAE were characterized and compared with each other. The isomerization of MAE to FAE with morpholine as an isomerization catalyst and monomer-isomerization radical polymerization were also investigated.     

铈离子与氨基甲酸酯类化合物引发丙烯酰胺聚合的研究

本文对铈离子与苯基氨基甲酸酯类化合物在H_2O-CH_3CN(3∶1,V/V)及H_2O-HCONH_2(1∶2,V/V)两种介质中引发丙烯酰胺的聚合进行了研究。考察了不同结构的苯基氨基甲酸酯对聚合的影响。苯基氨基甲酸酯类化合物对铈离子引发聚合均有促进作用,其中对-甲苯基氨基甲酸酯的促进作用最为显著。测定了聚合反应表现活化能及聚合动力学方程,并提出了聚合反应机理。     

Markovnikov hydroformylation catalyzed by ROPAC in the presence of phosphine and phosphine oxide ligands

Rhodium-catalyzed hydroformylation of 1-octene in the presence of different phosphine and phosphine oxide ligands has been investigated. The molecular structure of new phosphine ligand, fluorenylidine methyl phenyl diphenylphosphine, was determined by single-crystal X-ray crystallography. Parameters such as different ligands, molar ratio of ligand to rhodium complex, ratio of olefin to rhodium complex, pressure of CO : H₂ mixture, and time of the reaction were studied. The linear aldehyde was the main product when the phosphine ligands were used as auxiliary ligands while the selectivity was changed to the branched products when the related phosphine oxide ligands were used. Under optimized reaction conditions, in the presence of [Rh(acac)(CO)(Ph₃P)]-di(1-naphthyl)phenyl phosphine oxide, conversion of 1-octene reached 97% with 87% selectivity of branched aldehyde.     

Living syndiospecific polymerization of propylene promoted by C1‐symmetric titanium complexes activated by dried MAO

A series of C₁‐symmetric titanium complexes with both salicylaldiminato and β‐enaminoketonato as the ligands have been synthesized and investigated as the catalysts for propylene polymerization. In the presence of dried methylaluminoxane (dMAO), the complex with bulky substituent tert‐butyl ortho to alkyl oxygen can promote living polymerization of propylene with improved catalytic activity at ambient temperature, producing high molecular weight syndiotactic polypropylenes (rrrr 90.2%) with narrow molecular weight distributions (M_w/M_n = 1.07–1.22), via a propagation of 1,2‐insertion of monomer and chain‐end control of stereoselectivity. The propagation of polymer chain is completely different from that mediated by FI catalysts (the titanium complexes with phenoxy‐imine chelate ligands) which favor 2,1‐insertion of monomer. The interaction between a fluorine and a β‐hydrogen of a growing polymer chain, negligible chain transfer to monomer and dMAO without any free AlMe₃ were responsible for the achievement of living propylene polymerization. The substituent ortho to alkyl oxygen determined the stereo structure of the resultant polypropylene. In the case of less steric congested complexes with two nonequivalent coordination positions, the growing polymer chain might swing back to the favorite coordination position (site‐epimerization), forming m dyads regioirregular units. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cyclometalated 2‐phenylpyridine complex [RuII(o‐C6H4‐py)(MeCN)4]PF6 as a tunable catalyst for living radical polymerization

The cyclometalated complex [Ru^II(o‐C₆H₄‐py)(MeCN)₄]PF₆ ( 1 ) with a σ‐Ru? C bond and four substitutionally labile acetonitrile ligands mediates radical polymerization of different vinyl monomers, viz. n‐butyl acrylate, methyl methacrylate, and styrene, initiated by three alkyl bromides: ethyl 2‐bromoisobutyrate, methyl 2‐bromopropionate, and 1‐phenylethyl bromide. The polymerization requires the presence of Al(OiPr)₃ and occurs uncontrollably as a conventional radical process. The variation of the molar ratio of the components of the reaction mixture, such as initiator, Al(OiPr)₃ and catalyst, affected the polymerization rates and the molecular weights but did not improve the control. A certain level of control has been achieved by adding 0.5 eq of SnCl₂ as a reducing agent. Tin(II) chloride decreased the rate of polymerization and simultaneously the molecular weights became conversion‐dependent and the polydispersities were also narrowed. Remarkably, the level of control was radically improved in the presence of excess of the poorly soluble catalyst ( 1 ), when the added amount of ( 1 ) was not soluble any more, i.e., under heterogeneous conditions, the system became adjustable and the living polymerization of all three monomers was finally achieved. Possible mechanisms of the ( 1 )‐catalyzed polymerization are discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4193–4204, 2008     

A sterically hindered cobalt o-iminobenzosemiquinone complex in the polymerization of vinyl monomers

The influence of bis[4,6-di-tert-butyl-N-(2,6-dimethylphenyl)-o-iminobenzosemiquinonato]cobalt (II) on the radical polymerization of methyl methacrylate and styrene under the conditions of radical initiation by azo-bis-isobutyric acid dinitrile in the temperature range 70–90°C has been studied. The use of the cobalt complex containing redox-oxidized ligands leads to the suppression of autoacceleration of the polymerization of methyl methacrylate and to a linear increase in the molecular masses of the polymers with conversion. In the case of styrene polymerization, the control over the kinetics of the process and molecular weight characteristics of the polymers synthesized in the presence of the cobalt iminobenzosemiquinone complex is less pronounced.     

Bis(imino)pyridine iron alkyls containing beta-hydrogens: synthesis, evaluation of kinetic stability, and decomposition pathways involving chelate participation

Bis(imino)pyridine iron alkyl complexes bearing beta-hydrogens, ((iPr)PDI)FeR (((iPr)PDI = 2,6-(2,6-(i)Pr2-C6H3N=CMe)2C5H3N; R = Et, (n)Bu, (i)Bu, CH2 (cyclo)C5H 9; 1-R), were synthesized either by direct alkylation of ((iPr)PDI)FeCl (1-Cl) with the appropriate Grignard reagent or more typically by oxidative addition of the appropriate alkyl bromide to the iron bis(dinitrogen) complex, ((iPr)PDI)Fe(N2)2 (1-(N2)2). In the latter method, the formal oxidative addition reaction produced ((iPr)PDI)FeBr (1-Br), along with the desired iron alkyl, 1-R. Elucidation of the electronic structure of 1-Br and related 1-R derivatives by magnetic measurements, structural studies and NMR spectroscopy established high spin ferrous compounds antiferromagnetically coupled to chelate radical anions. Thus, the formal oxidative process is bis(imino)pyridine ligand-based (one electron is formally removed from each chelate, not the iron) during oxidative addition. The kinetic stability of each 1-R compound was assayed in benzene-d6 solution and found to produce a mixture of the corresponding alkane and alkene. The kinetic stability of the iron alkyl complexes was inversely correlated with the number of beta-hydrogens present. For example, the iron ethyl complex, 1-Et, underwent clean loss of ethane over the course of three hours, whereas the corresponding 1-(i)Bu compound had a half-life of over 12 h under identical conditions. The mechanism of the decomposition was studied with a series of deuterium labeling experiments and support a pathway involving initial beta-hydrogen elimination followed by cyclometalation of an isopropyl methyl group, demonstrating an overall transfer hydrogenation pathway. The relevance of such pathways to chain transfer in bis(imino)pyridine iron catalyzed olefin polymerization reactions is also presented.     

A different polynorbornene backbone by combination of two polymer growth pathways: vinylic addition and ring opening via β-C elimination

A new polynorbornene skeleton has been found that contains bicyclic norbornane units and cyclohexenyl methyl linkages. The polymers have been synthesized using a nickel catalyst in the presence of a controlled amount of ligands with low or moderate coordination ability. The backbone structure is the result of a vinylic addition polymerization, via sequential insertions of norbornene into a Ni–C bond (bicyclic units) combined with an unusual ring opening of the norbornene structure by a β-C elimination (cyclohexenyl methyl units) to give a new Ni–C(alkyl) bond that continues the polymerization. The ring opening events are favored when the rate of propagation of the vinylic addition polymerization decreases, and this can be modulated by making the coordination of norbornene to the metal center less favorable using additional ligands.

A new polynorbornene skeleton that contains a mixture of bicyclic norbornane units and cyclohexenylmethyl moieties can be obtained using a nickel catalyst.     

Ring‐opening polymerization and copolymerization of cyclic esters catalyzed by amidinate aluminum complexes

A series of new alkyl mono‐ and bimetallic aluminum complexes supported by novel amidinate ligands has been prepared in very high yields. These complexes were fully characterized by spectroscopic methods. Alkyl aluminum complexes 1 – 6 were investigated as catalysts for the ring‐opening polymerization and copolymerization of ε‐caprolactone and L‐lactide. Under the optimal reaction conditions, complex 5 acts as an efficient single‐component initiator for the ring‐opening polymerization and copolymerization of cyclic esters to yield biodegradable polyester materials with narrow polydispersities. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2397–2407     

席夫碱-铝配合物的合成及对丙交酯的立体选择性聚合

设计、 合成了一系列不对称席夫碱配体, 得到了相应的金属铝配合物. 研究了配合物在外消旋丙交酯的开环聚合反应中的催化性能. 结果表明, 系列配合物对外消旋丙交酯(rac-LA)的聚合催化活性明显提高, 并具有立体选择性.     

Spin trapping of propagating radicals derived from dialkyl fumarates

Propagating radicals of dialkyl fumarates (DRFs) and deuterated fumarate were trapped by admitting a 2-methyl-2-introsopropane (BNO) solution to the polymerization mixture containing the active radicals or by the polymerizations initiated with di-t-butyl hyponitrite in the presence of BNO. Although ESR spectra of the propagating radicals were appreciably changed with the size of the ester alkyl groups, all the nitroxyl radicals resulting from the spin trapping exhibited similar six-line spectra. The hyperfine splitting constant for the α-hydrogen of the radical moiety showed a slight dependence on the chain length, and the bulkiness of the ester alkyl group did not affect splitting of the spectra. These findings indicate that a substituted methylene radical is produced by addition of the primary radical to DRF followed by propagation throughout the polymerization and that poly(DRF) radical does not encounter severe hindrance in the reaction with BNO.     

Ring-opening polymerization of 2,2-dimethyltrimethylene carbonate using rare earth aryl oxides substituted by alkyl groups

Single component rare earth aryl oxides substituted by various alkyl groups [Ln(OAr)3] such as methyl,isopropyl,and tertbutyl have been developed to initiate the ring-opening polymerization of 2,2-dimethyltrimethylene carbonate(DTC).The catalytic activity of rare earth aryl oxides,characteristics of the ring-opening polymerization as well as the polymerization kinetics and mechanism were intensively examined.The experimental results turn out that the catalytic activity of Ln(OAr)3 changes in good concordanc...