Spectroscopic and spectrometric studies of anion recognition with calix[4]pyrroles in different reaction conditions

The binding studies of calix[4]pyrroles (1–6) with fluoro, chloro, bromo, iodo and sulphato anions generated from normal-tetrabutylammoniumfluoride, normal-tetrabutylammoniumchloride, normal-tetrabutylammoniumbromide, normal-tetrabutylammoniumiodide, and normal-tetrabutylammoniumsulphate respectively were investigated by electrospray ionization mass spectrometry (ESI-MS) in dichloromethane–acetonitrile in negative ion mode. The efficacy of a particular calix[4]pyrrole to bind with anions was found maximum at low cone voltage of the instrument, at high cone voltage the binding was suppressed due to removal of anion from the cavity of the macrocycles. The binding strength was found inversely proportional to the size of anion for a particular calix[4]pyrrole. The fragmentation pattern of calix[4]pyrrole was observed at higher cone voltage of ESI-MS and was interpreted. The association constants of calix[4]pyrroles and anions obtained from electronic transition studies were in good agreement with that observed from ¹H NMR titration studies.     

Anion recognition by alpha-arylazo-N-confused calix[4]pyrroles

The first example of substitution reaction in the free alpha-position of N-confused calix[4]pyrroles is reported: azo-coupling with various arenediazonium salts. The obtained azocompounds were used for studies of their anion-binding properties by UV-Vis spectroscopy.     

Metalloporphyrin-capped calix[4]pyrroles: heteroditopic receptor models for anion recognition and ligand fixation

Diametrically strapped calix[4]pyrrole-metalloporphyrin conjugates, potential hosts for anionic guests, have been synthesized and characterized. The syntheses rely on the acid-catalyzed condensation of two dipyrromethane bearing Ni(II) porphyrins with acetone. An (1)H NMR spectroscopic titration experiment indicated that the resulting receptors selectively trapped fluoride anions in organic media but not other, larger halide anions. The experimental results from titration and Job plots indicated that the bound fluoride anion must reside inside the cavity. The current systems provide a well-defined illustration of how size-selective anion receptors may be synthesized by incorporating recognition functions, such as Lewis acidity, hydrogen bonding, and encapsulating moieties into established recognition motifs, calix[4]pyrrole in the present instance.     

Single side strapping: a new approach to fine tuning the anion recognition properties of calix[4]pyrroles

Three calix[4]pyrroles bearing m-orcinol-derived diether straps of different lengths on one side of the tetrapyrrolic core have been synthesized and characterized. Structural information for an analogous diester bridged strapped system reported previously (Yoon, D. W.; Hwang, H.; Lee, C. H. Angew. Chem., Int. Ed. Engl. 2002, 41, 1757-1759) is also provided as are bromide and chloride anion affinities for all four systems determined by Isothermal Titration Calorimetry (ITC) in acetonitrile. Although both sets of the strapped calix[4]pyrroles displayed enhanced affinities for chloride and bromide anion, differences were seen among the various receptors that support the conclusion that the anion binding ability of calixpyrrole-type systems can be effectively tuned by modifying the length and nature of the bridging straps. In the specific case of the diether systems, the largest chloride affinity was seen with the shortest strap, whereas the largest affinity for bromide anion was recorded in the case of the longest strap. On the basis of these findings, as well as supporting (1)H NMR spectroscopic studies, it is postulated that not only cavity size per se, but also the ability of the aryl portion of the strap to serve as a CH hydrogen bond donor site are important in regulating the observed anion affinities.     

N-confused calix[4]pyrroles

This is a first review devoted to N-confused calix[4]pyrroles (NCCPs). NCCPs are a relatively recent arrival to the family of the pyrrole-based anion binding macrocycles, being for the first time identified in 1999. Yet, in a relatively short time these calix[4]pyrrole (CP) isomers attracted attention of the community of research groups interested in anion binding and sensing. This is because they are relatively easy to synthesize, but mainly because they posses anion-binding properties that are different from that of regular calix[4]pyrroles. The difference in anion-binding properties stems from a different binding mode between the NCCP and anion. While the regular CPs adopt in the complex an ideal cone-like conformation where all four pyrroles-NHs engage in hydrogen bonding to the anion, the inverted pyrroles do not allow forming the cone. NCCPs bind anions via a confused cone (CC), by three NH hydrogen bonds with an anion and a CH–anion contact. This different binding mode results also in different anion-binding affinity and selectivity compared to regular CPs. Also, the inverted pyrroles offer a unique possibility for selective chemical modification of the receptor. The corresponding colorimetric sensors were tested for anion binding applications. The results of colorimetric assays for anions are presented and potential applications discussed.     

Conformational and configurational diversity of solvent inclusion complexes of some calix[4]pyrroles and their anion recognition properties

Sterically hindered meso-tetramethyl-meso-tetraarylcalix[4]pyrroles 1-4 where aryl is p-fluorophenyl 1, p-chlorophenyl 2, and p-methylphenyl 3, 4 (configurational isomers) are synthesized and purified by the recrystallization technique. They are characterized by IR, ¹H and ¹³C NMR, and mass spectroscopy. Configurational isomers ααββ (3) and αααα (4) of meso-tetramethyl-meso-tetramethylphenylcalix[ 4]pyrroles are assigned by the ¹H NMR studies and confirmed by the X-ray diffraction analysis. The single crystal X-ray diffraction analysis reveals that the ethanol adduct of 1, the acetone adduct of 2 and 3 adopt the 1,2-conformation while the acetone-water adduct of 1 and the acetone adduct of 4 adopt partial cone and cone conformations respectively. The conformational diversity is due to non-covalent interactions among the encapsulated guest, pyrrolic NH protons, and meso- substituents. Anion binding studies (F^–, Cl^–, CH₃COO^–, HSO ₄ ^? ) are carried out through ¹H NMR titrations; the binding constants are evaluated using the EQNMR program, displaying that they are more selective towards fluoride rather than other anions with the 1:1 stoichiometry. The configuration of compounds drastically influences the ion-recognition processes.     

Cation effects in the separation of calix[4]pyrroles by nonaqueous capillary electrophoresis with tetraalkylammonium chloride salts as background electrolytes

The migration behavior of three calix[4]pyrroles (C4Ps) in acetonitrile (ACN) and in the mixtures of ACN/ethanol (EtOH) (95:5; v/v)with tetraalkylammonium chloride as background electrolyte (BGE) was studied. Electroosmotic flow (EOF) mobilities and absolute mobilities in ACN and mixture of ACN/EtOH (95:5; v/v) were investigated. A decrease of EOF mobilities in EtOH/ACN was observed compared with that of in pure ACN. Variation of the C4Ps effective mobilities as a function of the square root of concentration of tetraakylammonium chloride salts such as tetramethylammonium chloride (Me4NCl), tetraethylammonium chloride (Et4NCl) and tetrabutylammonium chloride (Bu4NCl) in both solvents was plotted, and straight lines were exhibited when Bu(4)NCl was used as BGE. Absolute mobilities of C4Ps were obtained by extrapolation from the mentioned plots. It was found that the absolute mobilities of C4Ps is independent of the nature of BGE and the values are: meso-octamethylcalix[4]pyrrole (OMCP)>meso-tetracyclopentylcalix[4]pyrrole (TPCP)>meso-tetracyclohexylcalix[4]pyrrole (THCP). The ion-pairing constants follow the order under given solvent: Me4N+>Et4N+>Bu4N+, and ion-pairing constant of C4P follows the order: THCP>TPCP>OMCP. As though, ion-pairing association is intensified by steric hindrance.     

Analytical applications of nano-baskets of calix[4]pyrroles

Calix[4]pyrrole is one such class which holds a great promise in the fields of sensors and their unique behavior as sensors owes to its structural flexibility. Anion binding ability of calix[4]pyrrole has been modified in a variety of ways. Introduction of electron releasing and electron withdrawing groups at the meso position or at β-pyrrolic positions leads to calix[4]pyrrole with deep cavities and fixed walls which shows increased selectivity and modified binding effects. Strapping of calix[4]pyrrole is another way to modify its structural behavior which is responsible for its binding behavior. Choice of strap could play a profound role not only in increasing the intrinsic anion binding affinity of calix[4] pyrrole, but also in modulating the receptor anion stoichiometry, thereby modifying potentially the inherent anion binding selectivity. Calix[n]pyrroles with extended cavities have also been synthesized. Such as calix[3]bipyrrole binds bromide substantially with high affinity than calix[4]pyrrole. Calix[4]pyrrole has also been used to produce anion sensors that can report the presence of anion by means of a color change. The medium effect on the complexation of calix[4]pyrrole and anion has been investigated in various solvents. Calix[4]pyrrole has also been used to increase the ionic conductivity of solid polymer electrolyte by anion complexation of the metal salt. Calix[4]pyrrole has been used to obtain optical sensors using surface plasmon resonance technique. Composite films of cellulose acetate containing calix[4]pyrrole has also been reported which has potential usage in packaging, storage and preservation. In nut shell, calix[4]pyrrole can be modified in a variety of ways to form versatile sensors which can be used in variety of ways in various areas.     

Anion binding behavior of heterocycle-strapped calix[4]pyrroles

A comparative study of the halide and benzoate anion binding properties of a series of phenyl, pyrrole, and furan-strapped calix[4]pyrroles has been carried out. These receptors, which have previously been shown to bind the chloride anion (Yoon et al., Angew. Chem., Int. Ed. 47(27):5038–5042, 2008), were found to bind bromide and benzoate anion (studied as the corresponding tetrabutylammonium salts) with near equal affinity in acetonitrile, albeit less well than chloride, as determined from ITC measurements or NMR spectroscopic titrations. This stands in marked contrast to the parent octamethylcalix[4]pyrrole, where the carboxylate anion affinities are substantially higher than those for bromide anion under identical conditions. This finding is rationalized in terms of tighter binding cavity present in the strapped systems. For all three anions for which quantitative data could be obtained (i.e., Cl^?, Br^?, PhCO₂ ^?), the pyrrole-strapped system displayed the highest affinity, although the relative enhancement was found to depend on the anion in question. In the specific case of fluoride anion binding to the pyrrole-strapped receptor, two modes of interaction are inferred, with the first consisting of binding to the calix[4]pyrrole via NH-anion hydrogen bonds, followed by a process that involves deprotonation of the strapped pyrrolic NH proton. A single crystal X-ray diffraction analysis provides support for the first of these modes and further reveals the presence of a methanol molecule bound to the fluoride anion.     

A novel calix[4]arene-based neutral semicarbazone receptor for anion recognition

A series of novel calix[4]arene-based neutral semicarbazone and thiosemicarbazone receptors have been synthesized and characterized. The molecular receptor 4a recognizes in preference to other anions (Cl⁻, Br⁻, I⁻, , and ) through a 1:1 binding-stoichiometry.     

Tetrathiafulvalene-calix[4]pyrroles: synthesis, anion binding, and electrochemical properties

The syntheses of monotetrathiafulvalene-calix[4]pyrrole 5 and bistetrathiafulvalene-calix[4]pyrrole 6, prepared from the acid-catalyzed condensation of monopyrrolo[3,4-d]tetrathiafulvalene (MPTTF, 7) with acetone in the presence of tripyrrane 8 and dipyrromethane 9, respectively, are described. Compound 5 and the previously reported tetrathiafulvalene-calix[4]pyrrole 4 both adopt a 1,3-alternative conformation in the solid state, as determined from X-ray crystallographic analysis. The anion binding properties of the tetrathiafulvalene-calix[4]pyrroles 5 and 6, as well as those of the parent meso-octamethylcalix[4]pyrrole (1), were investigated in acetone using (1)H NMR spectroscopic and isothermal titration calorimetry (ITC) techniques and, within the error limits of the methods, were generally found to give concordant results. On the basis of the results of the ITC studies carried out in 1,2-dichloroethane, increasing the number of tetrathiafulvalene units annulated to the calix[4]pyrrole system serves to enhance the anion binding affinities substantially but at the price of lowered selectivity. Cyclic voltammetry (CV) studies, carried out in 1,2-dichloroethane, provided evidence of an anion-dependent electrochemical response with Cl(-) and Br(-) ions. This response was particularly dramatic in the case of the monotetrathiafulvalene-calix[4]pyrrole 5, with a DeltaE(max) of -145 mV being seen after the addition of approximately 1 equiv of Cl(-) ion.     

Synthesis and anion recognition of neutral receptors based on multiamide calix[4]arene

Two multiamide calix[4]arenes (5, 6) were synthesized and characterized by NMR, MS and elemental analysis. The binding properties of receptors with some anions (π-O₂NPhOPO₃²⁻, π-O₂NPhO⁻, H₂PO₄⁻, Ac⁻, Cl⁻, Br⁻ and I⁻) were studied by UV-Vis spectra. The results indicate that the tetraamide calix[4]arenes (5, 6) have a good selectivity to the anions containing aromatic ring (π-O₂NPhOPO₃ ²⁻, π-O₂NPhO⁻). The 1 : 1 complexes between host and guest were formed through multiple hydrogen bonding and π-π interactions. The hosts 5 and 6 also show a definite binding ability for the anions (H₂PO₄⁻, Ac⁻, Cl⁻) that have no ultraviolet absorption, which provides a simple method of spectrum detection for these anions.     

A [2]catenane containing an upper-rim functionalized calix[4]arene for anion recognition

A novel [2]catenane is synthesized in good yield from an upper-rim functionalized calix[4]arene macrobicycle and a nitro-substituted isophthalamide threading component in the presence of a chloride anion template via a ring-closing metathesis (RCM) reaction. After halide anion template removal the resulting catenane host exhibits a high degree of selectivity for chloride in competitive organic solvent mixtures.     

Cis- and trans-strapped calix[4]pyrroles bearing phthalamide linkers: synthesis and anion-binding properties

[reaction: see text] New cis-strapped calix[4]pyrrole derivatives 12, 13, and 19 and trans-strapped systems 14 and 15 bearing isophthalate-derived diamide spacers linked to the tetrapyrrolic core have been synthesized and characterized by spectroscopic means. The anion-binding behavior of these receptors was investigated by proton NMR spectroscopy and isothermal titration calorimetry (ITC). A 2:1 binding stoichiometry was observed under the conditions of NMR analysis but not at the lower concentration regime used for ITC. As gauged from both sets of analyses, these new strapped systems display affinities for halide anions that are enhanced compared to those of normal, unstrapped calix[4]pyrrole. However, contrary to expectations, no size-dependent selectivity for anions is observed as the length of the bridging strap is varied. Such results are interpreted in terms of anion-binding processes that occur outside the central pocket defined by the strap but that still favor strong associations as the result of the increased number of hydrogen-bonding donors the amide groups provide.     

Syntheses, structures, and anion-binding properties of two novel calix[2]benzo[4]pyrroles

Calix[2]benzo[4]pyrrole m-6 and p-6, each containing two dipyrromethane moieties and two m-phenylene or p-phenylene units, respectively, were readily synthesised from pyrrole, 1,3- and 1,4-bis(1,1'-dimethylhydroxymethyl)benzene, (m-4 and p-4, respectively) and acetone. Macrocycles m-6 and p-6 were tested as receptors for a selection of anions, such as acetate, dihydrogenphosphate and fluoride. The X-ray structures of m-6 and p-6 and those of the complexes m-6F(-), m-6Cl(-) and m-6CH(3)COO(-) (with an nBu(4)N(+) counterion) were also determined.     

Capture and displacement-based release of the bicarbonate anion by calix[4]pyrroles with small rigid straps

Two-phenoxy walled calix[4]pyrroles 1 and 2 strapped with small rigid linkers containing pyridine and benzene, respectively, have been synthesized. ¹H NMR spectroscopic analyses carried out in CDCl₃ revealed that both of receptors 1 and 2 recognize only F⁻ and HCO₃⁻ among various test anions with high preference for HCO₃⁻ (as the tetraethylammonium, TEA⁺ salt) relative to F⁻ (as the TBA⁺ salt). The bound HCO₃⁻ anion was completely released out of the receptors upon the addition of F⁻ (as the tetrabutylammonium, TBA⁺ salt) as a result of significantly enhanced affinities and selectivities of the receptors for F⁻ once converted to the TEAHCO₃ complexes. Consequently, relatively stable TEAF complexes of receptors 1 and 2 were formed via anion metathesis occurring within the receptor cavities. By contrast, the direct addition of TEAF to receptors 1 and 2 produces different complexation products initially, although eventually the same TEAF complexes are produced as via sequential TEAHCO₃ and TBAF addition. These findings are rationalized in terms of the formation of different ion pair complexes involving interactions both inside and outside of the core receptor framework.

The inherent selectivity of anion receptors can be reversed by ion pairing occurring both inside and outside of the receptor cavity.     

Lithiation of meso-octamethylcalix[4]pyrrole: a general route to C-Rim monosubstituted calix[4]pyrroles

Lithiation and subsequent addition of an electrophile to meso-octamethylcalix[4]pyrrole provides a straightforward synthetic route to new, C-rim monosubstituted calix[4]pyrroles. A variety of electrophiles were used, resulting in calix[4]pyrroles with appended functional groups including carboxyl, ester, iodo, and formyl. This method was optimized to give maximum yields of the monosubstituted derivatives with lowest possible contamination by di- and trisubstituted congeners. Solid-state studies, performed for a number of these derivatives, showed unexpected supramolecular interactions involving both solvents and the monosubstituted calix[4]pyrrole derivatives themselves.     

A novel calix[4]arene fluorescent receptor for selective recognition of acetate anion

A novel bridged fluorescent calix[4]arene with 1,8-diaminoanthracene and glycine at the upper rim has been prepared, which exhibited selective recognition towards AcO⁻ over other anions such as F⁻, Cl⁻, Br⁻, , , I⁻ and by fluorescence spectroscopy and ¹H NMR method.     

Sensing of antipyretic carboxylates by simple chromogenic calix[4]pyrroles

We present a simple, two- or three-step method for the synthesis of chromogenic octamethylcalix[4]pyrrole-based (OMCP) sensors for anions. Electrophilic aromatic substitution allows for converting the pyrrole moieties of OMCP into a dye. The formation of a sensor-anion complex results in partial charge transfer and a dramatic change in color. The absorption (UV-vis) and NMR titration experiments show that the chromogenic OMCPs sense anions administered as aqueous solutions, even at high ionic strength ( approximately 0.1 M NaCl), while displaying selectivity for pyrophosphate and carboxylate anions. The experiments with polyurethane sensor films show a strong response for aqueous carboxylates, such as antipyretics naproxen approximately ibuprofen > salicylate, without being biased by bicarbonate or carboxy termini of blood plasma proteins.     

Calix[4]pyrroles bearing proximally meso-meso linking straps: synthesis and anion binding properties

Calix[4]pyrroles bearing two proximally crossing straps on the same or the opposite sides have been synthesized for the first time. The doubly cis-strapped compound exhibited highly cooperative six-point hydrogen bonding interactions with the anion involving both pyrrolic N-Hs and Ar-Hs.