Coupling of desorption and photoionization processes in two-step laser mass spectrometry of polycyclic aromatic hydrocarbons

The response of polycyclic aromatic hydrocarbons (PAHs) to different desorption and ionization fluences has been investigated in a laser desorption/multiphoton ionization/time-of-flight mass spectrometry scheme. The results evidence an intricate relationship between the desorption and ionization steps, tentatively attributed to the amount of internal energy acquired by the desorbed molecules. Different behaviors have been found for the various PAHs considered, leading to a parametric “signature” for each species. Moreover, some insights on the fragmentation mechanism of the desorbed PAHs have been obtained, with possible interpretation in the frame of a “ladder-switching” model.     

Determination of levamisole in feeds by liquid chromatography coupled to electrospray mass spectrometry on an ion trap

Test methods have to be developed by laboratories for official control to monitor possible misuse of veterinary drugs in animal productions, also through feeding stuff. A novel method for identification and quantification of levamisole in feeds by liquid chromatography coupled to electrospray mass spectrometry in an ion trap (LC/ESI-MS/MS) is herein described; after a single-step cleanup by liquid-liquid extraction from the feed and separation by reversed-phase liquid chromatography, levamisole was determined and unambiguously confirmed by tandem mass spectrometry, on the basis of two product ions. The method was in-house validated, according to the Regulation 882/2004/EC, evaluating trueness, repeatability, within-laboratory reproducibility, ruggedness, specificity, and the limit of quantification (LOQ). The method is reliable and specific for complete and complementary feeds for pigs, cattle, rabbits and poultry; very good mean recoveries (higher than 92 %) and precision (RSD values?相似文献   

Development of a liquid chromatography/atmospheric pressure photo-ionization high-resolution mass spectrometry analytical method for the simultaneous determination of polybrominated diphenyl ethers and their metabolites: application to BDE-47 metabolism in human hepatocytes

Polybrominated diphenyl ethers (PBDEs) are flame retardants widely used in electronic and domestic goods. These persistent pollutants are present in the environment and in humans, and their toxicological properties are of growing concern. PBDEs can be metabolised into compounds suspected to be responsible for their toxicity. These metabolites have been characterised quite well in rodents and fish, but available information in humans remains scarce. For their identification, an efficient method for the simultaneous analysis of PBDEs, hydroxylated PBDEs (OH-PBDEs), and other PBDE metabolites in a single run was needed and has been developed in this work. Atmospheric pressure ionisation modes were compared, and Atmospheric Pressure Photo-Ionization (APPI) was selected. After careful setting of APPI parameters such as dopant and operating temperature, the optimised method was based on APPI ionization coupled to High-Resolution Mass Spectrometry operating in the full scan mode at a resolution of 60 000. This provided excellent sensitivity and specificity, allowing the discrimination of signals which could not be resolved on a triple quadrupole used as a reference. The full-scan high-resolution acquisition mode allowed monitoring of both parent PBDEs and their metabolites, including hydroxylated PBDEs, with detection limits ranging from 0.1?pg to 4.5?pg injected on-column based on the investigated standard compounds. The method was applied to the study of BDE-47 metabolism after incubation with human primary cultures of hepatocytes, and proved to be efficient not only for monitoring the parent compound and expected hydroxylated metabolites, but also for the identification of other non-targeted metabolites. In addition to hydroxy-BDE-47, several conjugated metabolites could be located, and the formation of a dihydrodiol derivative was evidenced for the first time in the case of PBDEs in this work.     

Systematic evaluation of acetone and acetonitrile for use in hydrophilic interaction liquid chromatography coupled with electrospray ionization mass spectrometry of basic small molecules

Sub-2-μm particle size hydrophilic interaction liquid chromatography [HILIC] combined with mass spectrometry has been increasing in popularity as a complementary technique to reversed-phase LC for the analysis of polar analytes. The organic-rich mobile phase associated with HILIC techniques provides increases in compound ionization, due to increased desolvation efficiency during electrospray ionisation mass spectrometric (ESI-MS) analysis. Although recent publications illustrated selectivity and response comparisons between reversed-phase LC/MS and HILIC LC/MS, there are limited discussions evaluating the optimisation of the mass spectrometry parameters regarding analytes and alternative mobile phases. The use of acetone as an alternative organic modifier in HILIC has been investigated with respect to signal-to-noise in ESI-MS for a variety of polar analytes. Analyte reponses were measured based on a variety of cone and capillary voltages at low and high pH in both acetone and acetonitrile. In order to visualise compound behaviour in the ESI source, surface plots were constructed to assist in interpreting the observed results. The use of acetone in ESI is complicated at low m/z due to the formation of condensation products. Favourable responses were observed for certain analytes and we envisage offering an insight into the use of acetone as an alternative to acetonitrile under certain analytical conditions for particular compound classifications for small molecule analysis. We also highlight the importance of optimising source voltages in order to obtain the maximum signal stability and sensitivity, which are invariably, highly solvent composition dependent parameters.     

Determination of bakkenolide A in rat plasma using liquid chromatography/tandem mass spectrometry and its application to a pharmacokinetic study

A sensitive rapid analytical method was established and validated to determine the bakkenolide A (BA) in rat plasma. This method was further applied to assess the pharmacokinetics of BA in rats receiving a single dose of BA. Liquid chromatography tandem mass spectrometry in multiple reaction monitoring mode was used in the method, and costundide was used as internal standard. A simple protein precipitation based on methanol was employed. The combination of a simple sample cleanup and short chromatographic running time (2.4?min) increased the throughput of the method substantially. The method was validated over the range of 1-1000?ng/mL with a correlation coefficient?>?0.99. The lower limit of quantification was 1?ng/mL for BA in plasma. Intra- and inter-day accuracies for BA were 93-112% and 103-104%, respectively, and the inter-day precision was less than 15%. After a single oral dose of 20?mg/kg of BA, the mean peak plasma concentration (C(max) ) of BA was 234.7?±?161?ng/mL at 0.25?h. The area under the plasma concentration-time curve (AUC(0-24 h) ) was 535.8?±?223.7?h·ng/mL, and the elimination half-life (T(1/2) ) was 5.0?±?0.36?h. In case of intravenous administration of BA at a dosage of 2?mg/kg, the area under the plasma concentration-time curve (AUC(0-24 h) ) was 342?±?98 h?ng/mL, and the elimination half-life (T(1/2) ) was 5.8?±?0.7?h. Based on the results, the oral bioavailability of BA in rats at 20?mg/kg is 15.7%. Copyright ? 2012 John Wiley & Sons, Ltd.     

A reliable method by ultra-performance liquid chromatography coupled with tandem mass spectrometry to quantify and confirm simultaneously the presence of solvent metabolites in workers' urine

Ultra-performance liquid chromatography coupled with tandem mass spectrometry was used for the biological monitoring of workers occupationally exposed to solvents. The method was developed using a triple quadrupole to investigate the relevant urinary metabolites of styrene, namely mandelic acid and phenylglyoxylic acid. The method provides quantitative and qualitative data to give additional assurance about the nature of the contaminant analyzed in workers' urine. A full scan and a product ion scan were acquired within the chromatographic peak acquired in MRM. For the two metabolites, the repeatability was 96%, the precision ≥97%, and the accuracy ≥93?±?3%. The quantitative performances were not influenced by the inclusion of simultaneous full scan acquisition as compared to a usual quantitative approach. Footprints of each substance of interest were obtained at each injection, and full scan data can be interrogated for the presence of interferences and other contaminants. The method developed has been submitted to random real samples from both non-occupationally and occupationally exposed workers. The urines of non-occupationally exposed workers were all free of mandelic acid, phenylglyoxylic acid and putative interferences showing the high selectivity of the method. However, the urines of occupationally exposed workers were robustly quantified. The levels of mandelic acid and phenylglyoxylic acid ranged between 0.2 and 9?mM, and the footprints of each metabolite and structural information were acquired in parallel with the quantitative results, thus providing unquestionable data about the nature of the contaminant and the levels reported. The combination of qualitative information acquired simultaneously with quantitative results provides the structural information needed in case of questions, without any harmful effect on the robustness and throughput of the quantitative analysis.     

Application of calixarene to high active surface‐enhanced Raman scattering (SERS) substrates suitable for in situ detection of polycyclic aromatic hydrocarbons (PAHs) in seawater

The characteristics of the sol–gel matrix embedding Ag nanoparticles functionalized with 25,27‐dimercaptoacetic acid‐26,28‐dihydroxy‐4‐tert‐butylcalix[4]arene (DMCX) suitable for the in situ detection of polycyclic aromatic hydrocarbons (PAHs) in seawater is presented. The DMCX‐functionalized silver nanoparticles were produced by the thermal reduction method in xerogel film. The silver colloid blocks were formed in the sol–gel matrix, with a diameter ranging from 50 to 120 nm. DMCX forming the monolayer on the silver nanoparticle surface contributes to the surface‐enhanced Raman scattering (SERS) activity due to the aggregation of silver nanoparticles and the preconcentration of PAH molecules within the zone of electromagnetic enhancement. When selected, PAH molecules e.g. pyrene and naphthalene were adsorbed onto the SERS substrate; Raman band positions of PAH were slightly shifted. A calibration procedure reveals that this type of SERS substrate has a limit of detection of 3 × 10⁻¹⁰ mol/l for pyrene and 13 × 10⁻⁹ mol/l for naphthalene in artificial seawater. The Raman signal response on a pyrene concentration change in artificial seawater was evaluated using a 671‐nm Raman setup with a flow‐through cell. This type of SERS substrate will be suitable for the in situ trace detection of pollutant chemicals in seawater. Copyright © 2012 John Wiley & Sons, Ltd.     

Simultaneous analysis of several synthetic cannabinoids, THC, CBD and CBN, in hair by ultra-high performance liquid chromatography tandem mass spectrometry. Method validation and application to real samples

A simple procedure for the quantitative detection of JWH-018, JWH-073, JWH 200, JWH-250, HU-210, Δ(9)-tetrahydrocannabinol (THC), cannabidiol (CBD) and cannabinol (CBN) in hair has been developed and fully validated. After digestion with NaOH and liquid-liquid extraction, the separation was performed with an ultra-high performance liquid chromatography system coupled to a triple quadrupole mass spectrometer operating in the selected reaction monitoring mode. The absence of matrix interferents, together with excellent repeatability of both retention times and relative abundances of diagnostic transitions, allowed the correct identification of all analytes tested. The method was linear in two different intervals at low and high concentration, with correlation coefficient values between 0.9933 and 0.9991. Quantitation limits ranged from 0.07 pg/mg for JWH-200 up to 18 pg/mg for CBD The present method for the determination of several cannabinoids in hair proved to be simple, fast, specific and sensitive. The method was successfully applied to the analysis of 179 real samples collected from proven consumers of Cannabis, among which 14 were found positive to at least one synthetic cannabinoid.