Te-rich Ge–Te–Se glass for the CO2 infrared detection at 15 μm

Te_80−xGe₂₀Se_x glasses have been prepared along the GeSe₄–GeTe₄ axis using the classical method in silica tube under vacuum. A phase separation domain appears for composition around Te₄₀Ge₂₀Se₄₀. Our attention was turned toward the Te-rich compositions corresponding to 1 < x < 5 at.%. These glasses are transparent from 4 to about 20 μm without any purification of the starting elements. Furthermore the difference ΔT between the crystallization temperature T_x and the vitreous transition temperature T_g lies at about 110 °C that is to say 30 °C higher than for the GeTe₄ reference glass. Finally the introduction of a few percentages of Se makes the glasses much easier to prepare and more stable against crystallization, making them drawable as optical fibers for example. Taking into account their transparency window, encompassing the CO₂ absorption band around 15 μm, the Te_80−xGe₂₀Se_x with 1 < x < 5 at.% could become matchless composition for the CO₂ infrared detection as planed by the Darwin mission of the European Space Agency.     

Electro-optical characterization of Ge–Se–Te glasses

Chalcogenide bulk glasses Ge₂₀Se_80−xTe_x for x(0,15) have been prepared by systematic replacement of Se by Te. Selected glasses have been doped with Ho, Er and Pr, and samples have been characterized by transmission spectroscopy, measurements of dc electrical conductivity and low-temperature photoluminescence. Absorption coefficients have been derived from measured transmittance and estimated reflectance. Arrhenius plots of dc electrical conductivity, in the measured temperature range 300–460 K, are characterized by single activation energies roughly equal to the half of the optical gap. Activation energies deduced from Arrhenius plots reveal a systematic decrease with increasing Te content. Similarly, both absorption and low-temperature photoluminescence spectra reveal shifts of absorption edge and/or dominant luminescence band to longer wavelength due to Te → Se substitution. Samples doped with Ho and Er exhibit a strong luminescence at 1200 and 1540 nm due to ⁵I₆ → ⁵I₈ and ⁴I_13/2 → ⁴I_15/2 transitions of Ho³⁺ and Er³⁺ ions, respectively. Pr doped samples exhibit only a relatively weak luminescence peak at 1590 nm, which we tentatively assign to ³F₃ → ³H₄ transition of Pr³⁺ ions. Absorption of the base glass luminescence at 1460 and 1520 nm has been observed at low temperature on samples doped with Pr and Er, respectively.     

Application of Ag–Ge–Se based chalcogenide glasses on ion-selective electrodes

Chalcogenide glasses (ChG) have proven to be promissory materials for their application as sensitive membranes in ion-selective electrodes (ISE’s), which are used in electrochemical sensors in order to detect heavy metal ions in solutions. AgGeSe system is not an exception. ChG system Ag_x(Ge_0.25Se_0.75)_100−x with x between 10 and 25 at.% was investigated as membrane material in ion-selective electrodes. This system has shown sensitivity to the presence of Cu²⁺ and Fe³⁺ ions. The introduction of Cu or Fe to the ChG composition was made in order to explore the role of metal addition on selectivity towards Cu²⁺ or Fe³⁺ ions. The analytical properties such as reproducibility, linear range, sensitivity, detection limit and working pH range were studied and its dependence on the ChG composition was analyzed for the three systems. The cross-selectivity of some interfering ions was investigated.     

Optical properties of thin films of system (As2Se3)80−x(As2Te3)x(SnTe)20 prepared by PLD

Thin amorphous films from system (As₂Se₃)_80−x(As₂Te₃)_x(SnTe)₂₀ were prepared by pulsed laser deposition (PLD) from their bulk glasses and their optical properties were studied by spectral ellipsometry. Spectral dependencies of refractive index, absorption and extinction coefficient and optical gap (1.41–1.66 eV for (As₂Se₃)_80−x(As₂Te₃)_x(SnTe)₂₀ with x = 20 resp. x = 0) were calculated from optical tansmittance, from ellipsometric data by Tauc method. High values of refractive index n₀ (2.49–2.60) and of non-linear χ⁽³⁾ coefficient of index of refraction (4.9–7.5 × 10⁻¹² esu for the glass (As₂Se₃)_80−x(As₂Te₃)_x(SnTe)₂₀ with x = 0 resp. x = 20) made studied thin films of system (As₂Se₃)_80−x(As₂Te₃)_x(SnTe)₂₀ promising candidates for application in optics and optoelectronics.     

Morphology and structural studies of Ag photo-diffused GeySe1−y thin films prepared by RF-sputtering

Thin films of Ag photo-doped-Ge_ySe_1−y films were prepared by RF co-sputtering technique. A systematic study of the relation existing between the host layer composition and the saturation rate in silver was carried out. Morphology and composition studies before and after chemical etchings were performed by scanning electron microscopy and electron probe micro-analyses, respectively. Raman spectroscopy studies showed the presence of corner-sharing and edge-sharing Ge(Se_1/2)₄ tetrahedra in all thin films. The vibration mode corresponding to Se_n-chains is observed for the Ge-poor host layer and on the contrary, Ge-rich thin films exhibited some tendency to form homopolar Ge–Ge bonds as a part of ethane-like Ge₂Se₆ units. These investigations revealed the amount of Ag that could be incorporated in the host layer. Such an amount strongly depends on the relative ratio Ge/Se in the Ge_ySe_1−y thin film. For the Ge-poor host layer, an incorporation of Ag (54 at.%) was observed but also a drastic increase in the film heterogeneity. On the other hand, the host layers with higher Ge content showed homogeneous surfaces and a saturation level of 32–41 at.% Ag.     

Electrical and optical properties of Sn10Sb20−xBixSe70 (0 x 8) glassy films

Chalcogenide glasses are interesting materials due to their infrared transmitting properties and photo-induced effects exhibited by them. Thin films of the glasses Sn₁₀Sb_20−xBi_xSe₇₀ (0 x 8) prepared by melt quenching technique were evaporated in a vacuum better than 10⁻⁵ mbar. Optical transmission spectra of all the deposited films were obtained in a range 400–2500 nm. The optical band gap and the absorption coefficient were calculated from the transmission data and refractive index was calculated using the swanepoel method. The optical band gap initially increases with increase in Bi content (for x = 2) and then decreases sharply for higher Bi concentrations. The refractive index as well as absorption coefficient decrease with increase in wavelength. The dark activation energy initially increases with increase in Bi content and then decreases with further addition.     

Rapid quenching and glass formation in chalcogenide glasses: Preparation and properties of Ge–As–Te glasses over an extended composition ranges

In Ge–As–Te system, the glass forming region determined by normal melt quenching method has two regions (GFR I and GFR II) separated by few compositions gap. With a simple laboratory built twin roller apparatus, we have succeeded in preparing Ge_7.5As_xTe_92.5−x glasses over extended composition ranges. A distinct change in T_g is observed at x = 40, exactly at which the separation of the glass forming regions occur indicating the changes in the connectivity and the rigidity of the structural network. The maximum observed in glass transition (T_g) at x = 55 corresponding to the average coordination number (Z_av) = 2.70 is an evidence for the shift of the rigidity percolation threshold (RPT) from Z_av = 2.40 as predicted by the recent theories. The glass forming tendency (K_gl) and ΔT (=T_c−T_g) is low for the glasses in the GFR I and high for the glasses in the GFR II.     

Glass formation in the GexTe100−x binary system: Synthesis by twin roller quenching and co-thermal evaporation techniques

The Ge–Te system exhibits one main composition domain where glasses can be easily prepared by melt quenching technique; this domain is centered on the eutectic composition Ge₁₅Te₈₅. In this work, bulk flakes and films of composition Ge_xTe_100−x with x  50 at.% were prepared by two different quenching techniques: (i) the twin roller quenching for bulk flakes and, (ii) the co-thermal evaporation for films (with thickness comprised between 2 and 14 μm). Electron Probe Micro-Analysis was used to check the composition of the materials while X-ray diffraction allowed identifying the amorphous state and/or the crystalline phases present in the Ge_xTe_100−x samples. Thermal properties for both types of materials were investigated by differential scanning calorimetry. The glass-forming regions were: 11.7–22.0 at.% Ge for bulk flakes and 10.2–35.9 at.% Ge for films. A similar thermal behavior of bulk flakes and thick films was highlighted by Differential Scanning Calorimetry.     

Surface morphology of as-deposited and illuminated As–Se chalcogenide thin films

The role of the composition and of the related changes of the structure in the formation of the surface of amorphous As_xSe_1−x (0 < x < 0.5) layers before and after light treatment was investigated by direct measurements of the surface roughness at nanometer-scale and surface deformations at micrometer-scale under influence of illumination. It was established that the surface roughness of the films, deposited by vacuum thermal evaporation, decreased with increasing As content, especially in compositions 0.1  x  0.3, where the maximum light stimulated surface deformations (localized expansion) occurs. Both relate to the rigidity percolation range and the maximum photoplastic effects, which are not directly connected to the known photodarkening effect, since it is minimal for these compositions.     

Features in the photoluminescence line-shape of heavily Er-doped Ge–S–Ga glasses

Erbium doped chalcogenide glasses are of great interest in the integrated optoelectronic technology due to their Er³⁺ intra-4f emission at the standard telecommunication wavelength of 1.54 μm. In this paper, the photoluminescence (PL) of a series of (GeS₂)_x(Ga₂S₃)_100−x (x = 75 and 67) glasses doped with high amounts of Er₂S₃ (1.8, 2.1, 2.4 and 2.7 mol%) under excitation with 1064 nm light has been studied. A quenching PL effect at 1.22 аt.% Er-doped (GeS₂)₇₅(Ga₂S₃)₂₅ and 1.39 аt.% Er-doped (GeS₂)₆₇(Ga₂S₃)₃₃ glasses has been established. The relative changes in PL line-shape at around 1540 nm have been estimated by deconvoluting the spectra to Gaussian sub-bands centered at 1519 ± 1, 1537 ± 1, 1546 ± 1, 1555 ± 1 and 1566 ± 4 nm, which correspond to F₂₁, F₁₁, F₂₂, F₁₂ and F₁₃ transitions in the ⁴I_13/2 and ⁴I_15/2 energy levels and have intensity and manifestation that are strongly depend on the Er-doping level. The influence of gallium on the PL efficiency has been evaluated with a view to enhanced emission cross-section.     

Phase separation in Ag–Ge–Se glasses

Field emission-scanning electron microscopy (FE-SEM) and electric force microscopy (EFM) measurements were carried out on bulk Ag_x(Ge_0.25Se_0.75)_100−x glasses with x = 5 and 15 at.%. The presence of chemical contrasts and electrical inhomogeneity throughout the samples indicated that the glasses were phase separated. Moreover it appears that while silver-rich nodules of ∼1 μm were embedded in a silver-poor connecting phase in the glass containing 5 at.% Ag, it was the opposite that occurred in the glass containing 15 at.% Ag. Such an inversion explains the large difference of seven orders of magnitude in the conductivity of the two glasses.     

Te-rich Ge–As–Se–Te bulk glasses and films for future IR-integrated optics

Ge₁₅As₁₅Se_70−xTe_x materials with x = 56, 60 and 63, of potential use in IR-integrated optics, were prepared by the classical melt-quenching method. A macroscopic phase separation was observed with a crystalline phase on the top and an amorphous one at the bottom. The glasses from the bottom were transparent from 1.9 to 16 μm without any purification of the elemental precursors Ge, As, Te and Se. The higher the Te/Se content in the glasses the lower their glass transition temperature and thermal stability. Films 7–12 μm thick of the above stated compositions were deposited by thermal evaporation. The higher the tellurium content, the larger the optical band gap shift of the films in the infra-red and the higher the refractive index.     

Photoinduced optical changes in amorphous Se and Ge–Se films

Films of amorphous Se, Ge₁₅Se₈₅, and Ge₂₅Se₇₅ were prepared by thermal evaporation. Measurements of photodarkening at 78 K showed that the optical gap (E_g) and the slope of optical absorption edge (B) are intercorrelated. The correlation between the photoinduced changes of E_g and B is discussed within both the model of Davis and Mott and Tauc's model for optical transitions in amorphous solids.     

A combined 77Se NMR and Raman spectroscopic study of the structure of GexSe1-x glasses: Towards a self consistent structural model

The short-range structures of stoichiometric and Se-deficient binary Ge_xSe_100 ?x glasses with 42 ≥ x ≥ 33.33 have been investigated using a combination of Raman and ⁷⁷Se Car–Purcell–Meiboom–Gill (CPMG) spikelet nuclear magnetic resonance (NMR) spectroscopy. When taken together, these spectroscopic results allow for self-consistent assignment of average ⁷⁷Se NMR isotropic chemical shifts to Se atoms in various coordination environments in Ge_xSe_100 ?x glasses. Analysis of the compositional variation of the relative concentrations of these Se environments indicates considerable violation of chemical order in the nearest-neighbor coordination environments of the constituent atoms in the stoichiometric Ge_33.33Se_66.67 glass. On the other hand, the presence of a random distribution of Ge―Ge bonds can be inferred in the Se-deficient glasses. Simulations of the previously published ⁷⁷Se NMR line shapes of Se-excess glasses on the basis of the revised structural assignments of ⁷⁷Se NMR chemical shifts obtained in this study conclusively indicate that the structure of these glasses is intermediate between a randomly connected and a fully clustered network of GeSe₄ tetrahedra and Se chains.     

Ab initio calculation of vibrational frequencies of GexSe1−x glass

We have used the density functional theory to make the models of Ge_xSe_1?x glass for which the energy is a minimum. The clusters, Ge₂Se₂, Ge₂Se₃, Ge₃Se, Ge₃Se₂, Ge₄Se, GeSe₃, GeSe₄, chain mode zig-zag Ge₄Se₃, corner sharing GeSe₄, and edge sharing Ge₂Se₆, have been made successfully and their vibrational spectra have been calculated from the first principles. We are able to optimize the bond distances as well as the bond angles. The calculated values of the frequencies of vibrations of the various clusters have been compared with those obtained from the experimental Raman spectra of actual glasses, Ge_xSe_1?x(0 < x < 0.3). The local concentration, x within 0.25 nm is nonuniform in the amorphous material. When the same cluster occurs in two stable configurations, low frequency vibrations of frequency, ν < 100 cm^?1, are found. The corner sharing GeSe₄ has low frequency modes at 54 cm^?1 and 93 cm^?1 whereas these modes disappear in the pyramidal configuration. The low frequency modes are therefore associated with the breaking of C₄ symmetry of the pyramidal configuration. The computed vibrational frequencies of clusters Ge₃, Ge₄Se₃, Ge₂Se₃, GeSe₃ and Ge₃Se₂ are actually present in the Raman spectra of the glass, Ge_xSe_1?x(0 < x < 0.3).     

High field electrical switching behavior of Ge10Se90−xTlx glasses

Electrical switching studies on bulk Ge₁₀Se_90−xTl_x (15 ? x ? 34) glasses have been undertaken to examine the type of switching, composition and thickness dependence of switching voltages. Unlike Ge-Se-Tl thin films which exhibit memory switching, the bulk Ge₁₀Se_90−xTl_x glasses are found to exhibit threshold type switching with fluctuations seen in their current-voltage (I-V) characteristics. Further, it is observed that the switching voltages (V_T) of Ge₁₀Se_90−xTl_x glasses decrease with the increase in the Tl concentration. An effort has been made to understand the observed composition dependence on the basis of nature of bonding of Tl atoms and a decrease in the chemical disorder with composition. In addition, the network connectivity and metallicity factors also contribute for the observed decrease in the switching voltages of Ge₁₀Se_90−xTl_x glasses with Tl addition. It is also interesting to note that the composition dependence of switching voltages of Ge₁₀Se_90−xTl_x glasses exhibit a small cusp around the composition x = 22, which is understood on the basis of a thermally reversing window in this system in the composition range 22 ? x ? 30. The thickness dependence of switching voltages has been found to provide an insight about the type of switching mechanism involved in these samples.     

Effect of Pb impurity on the localized states of Se–Ge glassy alloy

Space charge limited conduction (SCLC) is investigated in vacuum evaporated thin films of (Ge₂₀Se₈₀)_1−xPb_x (x = 0, 0.02, 0.04, 0.06). I–V characteristics have been measured at various fixed temperatures. At high fields (∼10⁴ V cm⁻¹), current could be fitted to the theory of space charge limited conduction in case of uniform distribution of localized states in the mobility gap of these materials. Using the above theory, the density of localized states near Fermi level is calculated. A reversal in density of localized states is obtained at 4 at.% of Pb.     

Experimental characterization of amorphous As–Se–Sb alloys

Thin films were thermally evaporated from ingot pieces of the As₃₀Se_70−xSb_x (with 2.5 ⩽ x ⩽ 17.5 at.%) glasses under vacuum of ∼10⁻⁵ Torr. Increasing Sb content was found to affect the thermal and optical properties of these films. Non-direct electronic transition was found to be responsible for the photon absorption inside the investigated films. The chemical bond approach has been applied successfully to interpret the decrease of the glass optical gap with increasing Sb content. Decreasing the thermal stability of the As₃₀Se_70−xSb_x specimen by increasing Sb content is responsible for occurring the amorphous–crystalline process at lower temperatures. Binary As₂Se₃ and Sb₂Se₃ phases are the main components of the stoichiometric As₃₀Se₆₀Sb₁₀ composition.     

Glass formation in the MoO3–Nd2O3–La2O3–B2O3 system

In MoO₃–Nd₂O₃–B₂O₃ and MoO₃–Nd₂O₃–La₂O₃–B₂O₃ systems, glasses were obtained in the region between 20 and 30 mol% Ln₂O₃. A liquid-phase separation region was observed near the MoO₃–B₂O₃ side up to 20 mol% Ln₂O₃ (La, Nd). The amorphous phases were characterized by X-ray diffraction (XRD), differential thermal analysis (DTA), UV–VIS and infrared spectroscopy (IR). According to DTA data B₂O₃-rich glasses are stable up to 630 °C while glasses rich in MoO₃ are stable up to 430 °C. The glasses are transparent in the visible region. Structural models for the glasses network were suggested on the basis of IR spectral investigations. It was established that BO₃ (1380 cm⁻¹), BO₄ (1100–950 cm⁻¹) and MoO₄ (860 cm⁻¹) groups build up the glass network. MoO₆ units (band at 880 cm⁻¹) together with BO₃ units participate in the formation of the glass network with a high MoO₃ content (80–90 mol%).     

Optical properties of Ge–Se–Te wedge-shaped films by using only transmission spectra

Amorphous Ge₁₀Se_90?xTe_x (with x = 0, 5, 10 and 15 at.%) thin films were prepared by thermal evaporation method. The optical transmission spectra of these films were measured in the wavelength range of 500–2500 nm in order to drive the refractive index and the absorption coefficient of these films. Applying the analytical expressions proposed by Swanepoel, enabling the calculations of optical constants of thin films with non-uniform thickness with high accuracy. Furthermore, the dispersion of the refractive index is discussed in terms of the single-oscillator Wemple and DiDomenico model. It was found that, the mechanism of the optical absorption follows the rule of the allowed non-direct transition. The optical band gab, E_g, and the oscillator energy, E_o, decrease while the dispersion energy, E_d, increases by increasing Te content. The relationship between the obtained results and the chemical compositions of the Ge₁₀Se_90?xTe_x thin films were discussed in terms of the chemical bond approach, the excess of Se–Se homopolar bonds and the cohesive energy (CE).