熔融插层法制备LLDPE/MgAl-LDH 剥离型纳米复合材料及其热性能研究

The interlayer surface of MgAl layered double hydroxide （MgAl-LDH） was modified by exchanging about half of the interlayer nitrate anions by dodecyl sulfate anions （DS） to get MgAl（H-DS） LDH, and then the MgAl（H-DS） was melt intercalated by LLDPE to get the LLDPE/MgAl-LDH exfoliation nanocomposites. The samples were characterized by Fourier transform infrared （PTIR） spectroscopy, X-ray diffraction （XRD）, ion chromatography, transmission electron microscopy （TEM）, and thermogravimetry analysis （TGA）. The nanoscale dispersion of MgAl-LDH layers in the LLDPE matrix was verified by the disappearance of （001） XRD reflection of the modified MgAl-LDH and by the TEM observation. The TGA profiles of LLDPE/MgAl-LDH nanocomposites show a faster charring process between 210 and 370 ℃ and a higher thermal stability above 370 ℃than LLDPE. The decomposition temperature of the nanocomposites with 10 wt% MgAl（H-DS） can be 42 ℃ higher than that of LLDPE at 40% weight loss.     

Synthesis and Characterization of PE-g-MA／MgAI-LDH Exfoliation Nanocomposite via Solution Intercalation

An organo‐modified MgAl‐layered double hydroxide (OMgAl‐LDH) was successfully exfoliated in the xylene solution of polyethylene‐grafted‐maleic anhydride (PE‐g‐MA) under re‐fluxing condition. A PE‐g‐MA/MgAl‐LDH exfoliation nanocomposite was formed after the precipitation of PE‐g‐MA from the dispersion system. The structure and thermal property of the PE‐g‐MA/MgAl‐LDH exfoliation nanocomposite were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), and thermogravimetry analysis (TGA). The disappearance of d₀₀₁ XRD peak of OMgAl‐LDH at 20 = 3.2° suggests that the MgAl hydroxide sheets are exfoliated in the nanocomposite. The TEM image shows that the MgAl hydroxide sheets of less than 70 nm in length or width are exfoliated and dispersed disorderly in PE‐g‐MA matrix. TGA profiles indicate that the PE‐g‐MA/MgAl‐LDH nanocomposite with 5 wt% OMgAl‐LDH loading shows a faster charring process in temperature range from 210 to 390 °C and a greater thermal stability beyond 390 °C than PE‐g‐MA does. The decomposition temperature of the nanocomposite is 25 °C higher than that of PE‐g‐MA as measured at 50% weight loss. The PE‐g‐MA/MgAl‐LDH nanocomposite is promising for application of flame‐retardant polymeric materials.     

Thermal properties and combustion characterization of nylon 6/MgAl-LDH nanocomposites via organic modification and melt intercalation

The nylon 6/MgAl layered double hydroxide (MgAl-LDH) nanocomposites have been prepared by melt intercalation of nylon 6 into the part organic dodecyl sulfate (DS) anion-modified MgAl(H-DS) interlayers. The structures and properties of MgAl(H-DS) and corresponding nanocomposites were characterized by ion chromotography, X-ray diffraction (XRD), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), and cone calorimeter test (CCT). The nanoscale dispersion of MgAl(H-DS) layers in the nylon 6 matrix has been verified by the disappearance of d₀₀₁ XRD diffraction peak of MgAl(H-DS) and the observation of TEM image. DSC tests evince that these exfoliated MgAl(H-DS) layers play the role of nucleating agents with strong heterogeneous nucleation effect on the crystallization of nylon 6 and increase its crystallization temperature over 12 °C with only 5 wt% MgAl(H-DS). TGA tests show that the effect of alkaline catalysis degradation from LDH on nylon 6 decreases the thermal stability of nylon 6/MgAl-LDH nanocomposites. The data from the cone calorimeter tests show that the HRR and MLR values of the sample with 5 wt% MgAl(H-DS) decrease considerably to 664 kW/m² and 0.161 g/m² s from 1064 kW/m² and 0.252 g/m² s of pure nylon 6, respectively. This kind of exfoliated nanocomposite is promising for the application of flame-retardant polymeric materials.     

Synergistic effects of layered double hydroxide with phosphorus-nitrogen intumescent flame retardant in PP/EPDM/IFR/LDH nanocomposites

<正>Synergistic effects of layered double hydroxide(LDH) with intumescent flame retardanct(IFR) of phosphorus-nitrogen (NP) compound in the polypropylene/ethylene-propylene-diene/IFR/LDH(PP/EPDM/IFR/LDH) nanocomposites and related properties were studied by X-ray diffraction(XRD),transmission electron microscopy(TEM),scanning electron microscopy(SEM),limiting oxygen index(LOI),UL-94 test,cone calorimeter test(CCT) and thermo-gravimetric analysis (TGA).The XRD and TEM results show that the intercalated and/or exfoliated nanocomposites can be obtained by direct melt-intercalation of PP/EPDM into modified LDH and that LDH can promote the IFR additive NP to disperse more homogeneously in the polymer matrix.The SEM results provide positive evidence that more compact charred layers can be obtained from the PP/EPDM/NP/LDH sample than those from the PP/EPDM/LDH and PP/EPDM/NP samples during burning.The LOI and UL-94 rating tests show that the synergetic effects of LDH with NP can effectively increase the flame retardant properties of the PP/EPDM/NP/LDH samples.The data from the CCT and TGA tests indicate that the PP/EPDM/NP/LDH samples apparently decrease the HRR and MLR values and thus enhance the flame retardant properties and have better thermal stability than the PP/EPDM/LDH and PP/EPDM/NP samples.     

Poly(L‐lactide)/layered double hydroxides nanocomposites: Preparation and crystallization behavior

Novel nanocomposites from poly(L ‐lactide) (PLLA) and an organically modified layered double hydroxide (LDH) were prepared using the melt‐mixing technique. The structure and crystallization behavior of these nanocomposites were investigated by means of wide‐angle X‐ray diffraction (WAXD), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and polarized optical microscopy (POM). WAXD results indicate that the layer distance of dodecyl sulfate‐modified LDH (LDH‐DS) is increased in the PLLA/LDH composites, compared with the organically modified LDH. TEM analysis suggests that the most LDH‐DS layers disperse homogenously in the PLLA matrix in the nanometer scale with the intercalated or exfoliated structures. It was found that the incorporation of LDH‐DS has little or no discernable effect on the crystalline structure as well as the melting behavior of PLLA. However, the crystallization rate of PLLA increases with the addition of LDH‐DS. With the incorporation of 2.5 wt % LDH‐DS, the PLLA crystallization can be finished during the cooling process at 5 °C/min. With the addition of 5 wt % LDH‐DS, the half‐times of isothermal melt‐crystallization of PLLA at 100 and 120 °C reduce to 44.4% and 57.0% of those of the neat PLLA, respectively. POM observation shows that the nucleation density increases and the spherulite size of PLLA reduces distinctly with the presence of LDH‐DS. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2222–2233, 2008     

The Role of Organomodified Different LDHs on Recycled Poly(ethylene terephthalate) Nanocomposites

Recycled poly(ethylene terephthalate)/organomodified‐layered double hydroxide (PET /organo‐LDH ) nanocomposites were successfully synthesized via a melt‐extrusion method. In an attempt to improve the compatibility with PET , LiAl , MgAl , and ZnAl LDH surfaces were modified with sulfanilic acid (SAS ) via electrostatic interaction with LDH cationic layers. In PET nanocomposites containing SAS ‐modified LDH , the (00l ) X‐ray diffraction (XRD ) peaks originating from organo‐LDH were not observed, indicating that the organomodified LDH layers were fully exfoliated and homogeneously dispersed within the PET matrix, which was also confirmed by transmission electron microscopy analysis. However, PET nanocomposites containing SAS ‐modified LiAl , MgAl , and ZnAl LDH showed broad (00l ) XRD peaks, indicating that the organo‐LDH was partially exfoliated. Thermogravimetric analysis confirmed that the thermal stability of PET/SAS‐modified LDH was significantly improved, depending on the type and loading content of SAS‐modified LDH compared to that of pristine PET . PET nanocomposites containing well‐dispersed SAS‐modified LDH showed substantial enhancement of the storage modulus.     

Triton X-100六角液晶相中制备镁铝层状双金属氢氧化物纳米片及其药物载体应用

以Triton X-100 六角相溶致液晶作微反应器, 采用共沉淀法制备了镁铝层状双金属氢氧化物(LDHs)纳米薄片(L-LDHs). 以双氯芬酸钠(DS)为药物模型分子, 采用离子交换法制备了DS插层LDHs (DS/L-LDHs)纳米杂化物, 在37.0 ℃、pH=7.2的缓冲溶液中, 考察了纳米杂化物的药物释放性能, 并与传统溶液共沉淀法制备的镁铝LDHs (S-LDHs)纳米片状颗粒进行了对比. 采用粉末X射线衍射(XRD)、傅里叶变换红外(FT-IR)光谱、场发射扫描电镜(FE-SEM)、透射电镜(TEM)和N₂吸附-脱附等技术对所制备的LDHs和DS/LDHs 样品的晶体结构、比表面积、形貌特征等进行了表征. 结果表明, L-LDHs比S-LDHs具有更低的片厚度, 更高的比表面积和药物负载量, 所形成的DS/L-LDHs纳米杂化物药物释放速率也明显低于DS/S-LSHs, 即L-LDHs更适于作药物载体. DS/L-LDHs纳米杂化物的药物释放过程符合准二级动力学方程, 受颗粒内部扩散过程控制. 溶致液晶模板法可实现LDHs的形貌可控制备, 为LDHs基功能材料的研发提供了新途径.     

Synthesis of heptamolybdate‐intercalated MgAl LDHs and its application in polyurethane elastomer

Heptamolybdate (Mo₇O₂₄^6?) was intercalated in the interlayer space between MgAl‐layered double hydroxides (Mo‐MgAl LDHs) by the hydrothermal and ion exchange method, and then polyurethane elastomer (PUE) based composites were prepared by the prepolymerization method with different amounts of Mo‐MgAl LDHs. X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectra, laser Raman spectroscopy (LRS), and scanning electron microscopy (SEM) were employed to characterize the obtained LDHs. The performance of the PUE/LDHs were evaluated by measuring their thermal gravimetric, heat release rate (HRR), and smoke density (Ds). The results show that PUE/LDH composites exhibit a lower peak heat release rate (pk‐HRR), Ds, and a prolonged combustion time, in comparison with neat PUE. Comparison between NO₃‐MgAl LDHs and Mo‐MgAl LDHs containing composites show that the introduction of Mo⁶⁺ is able to facilitate flame retardance and smoke suppression efficiency, which results mainly from the presence of MoO₃ derived from the decomposition of Mo₇O₂₄^6? intercalated LDHs. Mo‐MgAl LDHs reduce the pk‐HRR of composites by 39% with only 1 wt.% content, and the maximum Ds of composites is reduced to a minimal value of 274 with 10 wt.% Mo‐MgAl LDHs. More importantly, LDHs would improve the mechanical properties at a low content. The experimental results reveal the potential of Mo₇O₂₄^6? intercalated LDHs to improve both the flame retardancy and smoke suppression of PUE. Copyright © 2015 John Wiley & Sons, Ltd.     

层离型PMMA/镁铁双氢氧化物纳米复合材料的热降解研究

通过原位聚合方法制备了以非水溶性聚合物(聚甲基丙烯酸甲酯,PMMA)为基体,与MgFe双氢氧化物(LDH)具有良好相容性的层离型纳米复合材料.采用小角、广角X射线衍射(XRD)及透射电镜(TEM)对纳米复合材料的微观结构进行了分析,通过热重分析(TG)和玻璃化转变研究了纳米复合材料在空气和氮气氛围下的热降解过程.实验结果表明,MgFe-LDH的引入显著提高了聚合物基体的热降解温度和玻璃化转变温度,纳米复合材料的热稳定性显著提高.其中含量1.6 wt%的层离型纳米复合材料在失重50%时的热降解温度比纯样提高约69℃.并且整个纳米复合体系的相容性良好,含量8.0 wt%的样品,其可见光透过率仍可达90%以上.     

In situ synthesis of polyethylene terephthalate nanocomposites using bis (2‐hydroxyethyl) phthalate monomer

In this article, we address in situ synthesis of polyethylene terephthalate (PET) nanocomposites using the bis (2‐hydroxyethyl) phthalate monomer and inorganic layered materials (sulfanilic acid salt‐modified magnesium aluminum‐layered double hydroxides [MgAl LDH‐SAS] and Dimethyloctadecyl [3‐(trimethoxysilyl) propyl] ammonium chloride [DTSACl] and tetraethyl orthosilicate [TEOS]‐ modified clay [CL120‐DT]). The dispersion morphology of the synthesized nanocomposites was evaluated using XRD and TEM, from these results, it was confirmed that 0.5 wt% loaded PET/MgAl LDH‐SAS and PET/CL120‐DT nanocomposites have flocculated and intercalated morphologies, respectively. Thermomechanical analyses were performed by thermogravimetric analysis, dynamic mechanical analysis, and differential scanning calorimetry, respectively. Moreover, the water vapor transmission rate (WVTR) values of a pure PET, PET/CL120‐DT 0.5 wt%, and PET/MgAl LDH‐SAS 0.5 wt% nanocomposites were found to be 49, 45, and 46 g·m^?2·day^?1, respectively. Furthermore, the gas barrier properties of PET composite films containing various amounts of inorganic nanoparticles were investigated using Gas permeability analysis (GPA).     

Real-time tracking of hydrogen peroxide secreted by live cells using MnO2 nanoparticles intercalated layered doubled hydroxide nanohybrids

We report a facile and green method for the fabrication of new type of electrocatalysts based on MnO₂ nanoparticles incorporated on MgAl LDH P-type semiconductive channel and explore its practical applications as high-performance electrode materials for electrochemical biosensor. A series of MgAl layered doubled hydroxide (LDH) nanohybrids with fixed Mg/Al (M²⁺/M³⁺ atomic ratio of 3) and varied amount of MnCl₂.4H₂O are fabricated by a facile co-precipitation method. This approach demonstrates the combination of distinct properties including excellent intercalation features of LDH for entrapping nanoparticles and high loading of MnO₂ nanoparticles in the host layers of LDH. Among all samples, Mn5–MgAl with 0.04% loaded manganese has a good crystalline morphology. A well-dispersed MnO₂ nanoparticles encapsulated into the host matrix of hydrotalcite exhibit enhanced electrocatalytic activity towards the reduction of H₂O₂ as well as excellent stability, selectivity and reproducibility due to synergistic effect of good catalytic ability of MnO₂ and conductive MgAl LDH. Glass carbon electrode (GCE) modified with Mn5–MgAl possesses a wide linear range of 0.05–78 mM, lowest detection limit 5 μM (S/N = 3) and detection sensitivity of 0.9352 μAmM⁻¹. This outstanding performance enables it to be used for real-time tracking of H₂O₂ secreted by live HeLa cells. This work may provide new insight in clinical diagnosis, on-site environmental analysis and point of care testing devices.     

DFT‐Based Simulation and Experimental Validation of the Topotactic Transformation of MgAl Layered Double Hydroxides

The thermal topotactic transformation mechanism of MgAl layered double hydroxides (LDHs) is investigated by a combined theoretical and experimental study. Thermogravimetric differential thermal analysis (TG‐DTA) results reveal that the LDH phase undergoes four key endothermic events at 230, 330, 450, and 800 °C. DFT calculations show that the LDH decomposes into CO₂ and residual O atoms via a monodentate intermediate at 330 °C. At 450 °C, the metal cations almost maintain their original distribution within the LDH(001) facet during the thermal dehydration process, but migrate substantially along the c‐axis direction perpendicular to the (001) facet; this indicates that the metal arrangement/dispersion in the LDH matrix is maintained two‐dimensionally. A complete collapse of the layered structure occurs at 800 °C, which results in a totally disordered cation distribution and many holes in the final product. The structures of the simulated intermediates are highly consistent with the observed in situ powder XRD data for the MgAl LDH sample calcined at the corresponding temperatures. Understanding the structural topotactic transformation process of LDHs would provide helpful information for the design and preparation of metal/metal oxides functional materials derived from LDH precursors.     

Research of High Temperature Crystalline Structure and Property Evolution of Magnesium Aluminate Spinel

Magnesium aluminate spinel （MgAl2O4） with high purity has been prepared by using anodized waste slag from aluminum factory and （MgCO3）4Mg（OH）2.5H2O as the main raw materials to discuss the change laws and characteristics of crystalline structure, microstructures and properties. X-ray diffraction （XRD） and scanning electron microscopy （SEM）, together with relevant analysis software, were used to characterize the crystal phases and microstructures so as to get MgAl2O4. Results show that when increasing the holding time the amount of MgAl2O4 increases fwstly and then keeps stable, but bulk density and bending strength increase firstly and then decrease. The best holding time is determined to be 3 h because at this time the corresponding MgAl2O4 content is up to 93%, bulk density 3.23 g·cm^3, apparent porosity 4.6% and bending strength 122.4 MPa.     

From layered double hydroxide to spinel nanostructures: facile synthesis and characterization of nanoplatelets and nanorods

Mg-Al spinel (MgAl2O4) nanorods and nanoplatelets transformed from Mg-Al layered double hydroxide (Mg-Al-LDHs) were synthesized via a combined hydrothermal method and calcination route using Al(NO3).9H2O and Mg(NO3)2.6H2O as raw materials. The nanorods and nanoplatelets were characterized by means of physical techniques, including powder X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microcopy (HRTEM), selected-area electron diffraction (SAED), Fourier transform infrared spectra (FT-IR), thermogravimetric (TG), and nitrogen adsorption-desorption isotherms. XRD patterns reveal that the Mg-Al-LDHs nanostructures were obtained under a hydrothermal reaction temperature of 200 degrees C and Mg-Al spinel nanostructures were fabricated via calcination of the Mg-Al-LDHs nanostructures at 750 degrees C. It can be seen from TEM that the sizes of the Mg-Al-LDHs nanoplatelets were about 20-40 nm and the diameters of the MgAl2O4 nanorods were ca. 6 nm. The HRTEM images indicate that the crystal lattice spaces of the MgAl2O4 nanorods and nanoplatelets are 0.282 and 0.287 nm, respectively.     

Thermal stability and fire retardancy of PMMA (nano)composites with layered metal hydroxides containing dodecyl sulfate anions

Layered double hydroxides (LDHs) with Mg/Al, Zn/Al, Ca/Al metal hydroxide layers, and a Zn/Ni hydroxy double salt (HDS) were prepared with a common anion, dodecyl sulfate [CH₃(CH₂)₁₀COO^?, DS]. The LDH and HDS additives were melt blended with poly(methyl methacrylate) (PMMA). The dispersion and morphology were characterized via X‐ray diffraction (XRD) and transmission electron microscopy. Mg/Al‐DS and Zn/Al‐DS LDHs were found to form nanocomposites with PMMA, exhibiting good dispersion and some degree of exfoliated morphology for the Zn/Al‐DS/PMMA combination and mixed intercalation and exfoliation behavior for Mg/Al‐DS in PMMA. The Ca/Al‐DS LDH and Zn/Ni‐DS HDS formed microcomposites with PMMA. Thermal stability was investigated via thermogravimetric analysis; each of the additives increased the thermal stability of PMMA. Cone calorimetry was used to measure the fire properties; the microcomposite of Zn/Ni‐DS HDS at 10% loading provided the best improvement in peak heat release rate, with a 40% reduction over the pure polymer. The residue composition after burning the composites was investigated. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and UV absorption properties of 5, 5′-thiodisalicylic acid intercalated Zn−Al layered double hydroxides

5, 5′-Thiodisalicylic acid (TDSA) has been intercalated into a ZnAl-NO₃ layered double hydroxide (LDH) by an ion-exchange reaction. After intercalation of TDSA, the basal spacing in the LDH increased from 0.89 to 1.53 nm, suggesting that the TDSA anions were arranged in the interlayer galleries of ZnAl-TDSA-LDH as a tilted monolayer arrangement of dianions. The samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetry and differential thermal analysis (TGA-DTA), and UV-Visible spectroscopy (UV-Vis). The results show that the NO₃⁻ anions in the precursor have been completely replaced by TDSA anions to give ZnAl-TDSA-LDH having crystalline-layered structure. Detailed studies reveal the presence of a complex system of supramolecular interactions between LDH layers and TDSA anions. TGA-DTA curves suggest that the thermostability of TDSA was markedly enhanced by intercalation in the LDH host. Photostability tests show that the film of ZnAl-TDSA-LDH/PP possessed higher stability to UV radiation than either the film of TDSA/PP or pristine PP.     

Dispersion and size control of layered double hydroxide nanoparticles in aqueous solutions

We report a simple but efficient method to prepare stable homogeneous suspensions containing monodispersed MgAl layered double hydroxide (LDH) nanoparticles that have wide promising applications in cellular drug (gene) delivery, polymer/LDH nanocomposites, and LDH thin films for catalysis, gas separation, sensing, and electrochemical materials. This new method involves a fast coprecipitation followed by controlled hydrothermal treatment under different conditions and produces stable homogeneous LDH suspensions under variable hydrothermal treatment conditions. Moreover, the relationship between the LDH particle size and the hydrothermal treatment conditions (time, temperature, and concentration) has been systematically investigated, which indicates that the LDH particle size can be precisely controlled between 40 and 300 nm by adjusting these conditions. The reproducibility of making the identical suspensions under identical conditions has been confirmed with a number of experiments. The dispersion of agglomerated LDH aggregates into individual LDH crystallites during the hydrothermal treatment has been further discussed. This method has also been successfully applied to preparing stable homogeneous LDH suspensions containing various other metal ions such as Ni(2+), Fe(2+), Fe(3+), Co(2+), Cd(2+), and Gd(3+) in the hydroxide layers and many inorganic anions such as Cl(-), CO(3)(2-), NO(3)(-), and SO(4)(2-).     

Effect of the Composition of Initial Components and the Conditions of Activation on the Mechanochemical Synthesis of Magnesium–Aluminum Layered Double Hydroxides

The MgAl layered double hydroxides (LDHs) were prepared by two-stage synthesis, which included mechanochemical activation at the first stage and the interaction of the resulting sample with distilled water at the second stage. The influence of the material of grinding bodies (steel and ceramics), the conditions of activation (activation time and the centripetal acceleration of balls), and the nature of initial compounds on the phase composition of the resulting products was investigated. It was established that the formation of a single-phase MgAl LDH was observed upon mechanochemical activation with the use of steel grinding bodies at an acceleration of 1000 m/s² for 30 min. The samples prepared by a traditional coprecipitation method and a method that included a stage of mechanochemical activation possessed identical structural parameters. However, the mixed oxides formed upon the calcination of LDHs synthesized by mechanochemical activation were characterized by a more uniform pore space with a pore diameter of 4–5 nm with a developed specific surface.     

Collaboration of Ni,polyoxometalates and layered double hydroxides: synthesis,characterization, electrochemical and mechanism investigations as nano-catalyst in the Heck coupling reaction

Nickel (Ni) nanoparticles were immobilized on the surface of magnetic MgAl layered double hydroxide intercalated 10-molybdo-2-vanadophosphate (Fe–MgAl/Mo₁₀V₂–Ni) for the first time. The presence of Ni nanoparticles onthe high-surface area Fe–MgAl LDH structure in the presence of Mo₁₀V₂ makes this catalyst an ideal option in terms of efficiency and selectivity for Heck coupling reaction. Synergic effects of Mo₁₀V₂ and Ni were investigated by an electrochemical technique. Increasing of the ECSA of the catalyst compared to Fe–Mg–Al–Ni leads to enhancement of the catalytic activity and proves the synergic effect. A new catalytic mechanism was introduced for this kind of reaction. The resulting structure and its catalytic behavior were characterized by FT-IR, XRD, ICP-AES, TEM, SEM, EDX, EBSD, XPS, BET, VSM, CV, LSV and zeta potential analyses. More importantly, Fe–MgAl/Mo₁₀V₂–Ni can easily be separated from the reaction mixture using an external magnet and reused for at least four successive runs without any substantial reduction in its catalytic activity.     

载体焙烧温度对Ru/MgAl2O4催化剂液相苯部分加氢性能的影响

采用水热合成法制备了镁铝尖晶石(MgAl2O4)材料,制备了其负载的Ru催化剂,研究了MgAl2O4焙烧温度对Ru/MgAl2O4催化剂上液相苯部分加氢催化性能的影响.采用X射线粉末衍射、27A1固体核磁共振、傅里叶变换红外光谱、H2-程序升温还原、H2-程序升温脱附、N2物理吸附、透射电子显微镜和X射线光电子能谱等手...