Natural sample fractionation by FlFFF-MALLS-TEM: sample stabilization, preparation, pre-concentration and fractionation

Two flow field flow fractionation (FlFFF) systems: symmetrical (SFlFFF) and asymmetrical (ASFlFFF) were evaluated to fractionate river colloids. Samples stability during storage and colloids concentration are the main challenges limiting their fractionation and characterization by FlFFF. A pre-fractionation (<0.45 microm) and addition of a bactericide such as NaN3 into river colloidal samples allowed obtaining stable samples without inducing any modification to their size. Stirred cell ultra-filtration allowed colloidal concentration enrichment of 25-folds. Scanning electron microscope (SEM) micrographs confirmed the gentle pre-concentration of river samples using the ultra-filtration stirred cell. Additionally, larger sample injection volume in the case of SFlFFF and on channel concentration in the case of ASFlFFF were applied to minimize the required pre-concentration. Multi angle laser light scattering (MALLS), and transmission electron microscope (TEM) techniques are used to evaluate FlFFF fractionation behavior and the possible artifacts during fractionation process. This study demonstrates that, FlFFF-MALLS-TEM coupling is a valuable method to fractionate and characterize colloids. Results prove an ideal fractionation behavior in case of Brugeilles sample and steric effect influencing the elution mode in case of Cézerat and Chatillon. Furthermore, comparison of SFlFFF and ASFlFFF fractograms for the same sample shows small differences in particle size distributions.     

Application of flow field-flow fractionation for the characterization of macromolecules of biological interest: a review

An overview is given of the recent literature on (bio) analytical applications of flow field-flow fractionation (FlFFF). FlFFF is a liquid-phase separation technique that can separate macromolecules and particles according to size. The technique is increasingly used on a routine basis in a variety of application fields. In food analysis, FlFFF is applied to determine the molecular size distribution of starches and modified celluloses, or to study protein aggregation during food processing. In industrial analysis, it is applied for the characterization of polysaccharides that are used as thickeners and dispersing agents. In pharmaceutical and biomedical laboratories, FlFFF is used to monitor the refolding of recombinant proteins, to detect aggregates of antibodies, or to determine the size distribution of drug carrier particles. In environmental studies, FlFFF is used to characterize natural colloids in water streams, and especially to study trace metal distributions over colloidal particles. In this review, first a short discussion of the state of the art in instrumentation is given. Developments in the coupling of FlFFF to various detection modes are then highlighted. Finally, application studies are discussed and ordered according to the type of (bio) macromolecules or bioparticles that are fractionated.     

Size fractionation and characterization of natural colloids by flow-field flow fractionation coupled to multi-angle laser light scattering

Flow-field flow fractionation (FlFFF) coupled to multi-angle laser light scattering (MALLS) was evaluated for size and shape determination of standard spherical and arbitrarily shaped natural colloids. Different fitting methods for light scattering data retrieved from MALLS were evaluated to determine the particle size of spherical standards and natural colloids. In addition, FlFFF was optimized for best fractionation in connection to MALLS, minimal colloids-membrane interaction, and minimal sample losses. FlFFF, calibrated with standard particles, was used to determine hydrodynamic diameter, or radius (D(h) or R(h)), of the fractionated colloids, whereas the MALLS was used to determine root mean square radius of gyration (R(g)) for fractionated colloids. Combining both results, by calculating the R(g)/R(h) ratio, allows an estimation of colloid deviation from the shape of homogeneous sphere. Accordingly, this study demonstrates that, FlFFF-MALLS is a valuable technique for characterizing heterogeneous and arbitrarily shaped natural colloidal particles in terms of size and shape. To check the usefulness of FlFFF-MALLS in natural colloid studies, the technique was used to investigate the sedimentation behavior of extracted soil colloidal particles. Results illustrate that, in a silty till sample, carbonates function as cement between the colloidal particles, and consequently, change their sedimentation behavior. On the other hand, carbonate dissolution generates a more homogeneous colloidal sample.     

Hollow-fiber flow/hyperlayer field-flow fractionation for the size characterization of airborne particle fractions obtained by SPLITT fractionation

Hollow-fiber flow field-flow fractionation (HF FlFFF) was applied for the separation and size characterization of airborne particles which were collected in a municipal area and prefractionated into four different-diameter intervals >5.0, 2.5-5.0, 1.5-2.5, <1.5 microm) by continuous split-flow thin (SPLIIT) fractionation. Experiments demonstrated the possibility of utilizing a hollow-fiber module for the high-performance separation of supramicron-sized airborne particles at steric/hyperlayer operating mode of HF FlFFF. Eluting particles during HF FlFFF separation were collected at short time intervals (approximately 10 s) for the microscopic examination. It showed that particle size and size distributions of all SPLITT fractions of airborne particles can be readily obtained using a calibration and that HF FlFFF can be utilized for the size confirmation of the sorted particle fraction during SPLITT fractionation.     

Flow field-flow fractionation: a versatile approach for size characterization of α-tocopherol-induced enlargement of gold nanoparticles

Flow field-flow fractionation (FlFFF) was used for size characterization of gold nanoparticles. The measured particle sizes obtained from FlFFF for the commercial 10 nm gold nanoparticle standard and the gold nanoparticles synthesized in the laboratory were in good agreement with those measured by transmission electron microscopy (TEM). Further, the capability of α-tocopherol to induce enlargement of gold nanoparticles by catalysis of the reduction of AuCl₄⁻ by citrate was observed by monitoring the changes in particle size of gold nanoparticles using FlFFF. The effects of α-tocopherol and incubation time on enlargement of the gold nanoparticles were examined. Higher concentrations of α-tocopherol resulted in larger nanoparticles. At fixed α-tocopherol concentration, larger nanoparticles were formed at longer incubation times.     

Complementary use of flow and sedimentation field-flow fractionation techniques for size characterizing biodegradable poly(lactic acid) nanospheres

Poly(lactic acid) (PLA) nanoparticles were synthesized using a modified evaporation method, testing two different surfactants (sodium cholate and Pluronic F68) for the process. During their formulation the prodrug 5'-octanoyl-CPA (Oct-CPA) of the anti-ischemic N(6)-cyclopentyladenosine (CPA) was encapsulated. Three different purification methods were compared with respect to the influence of surfactant on the size characteristics of the final nanoparticle product. Flow and sedimentation field-flow fractionation techniques (FlFFF and SdFFF, respectively) were used to size characterize the five poly(lactic acid) particle samples. Two different combinations of carrier solution (mobile phase) were employed in the FlFFF analyses, while a solution of poly(vinyl alcohol) was used as mobile phase for the SdFFF runs. The separation performances of the two techniques were compared and the particle size distributions (PSDs), derived from the fractograms, were interpreted with the support of observations by scanning electron microscopy. Some critical aspects, such as the carrier choice and the channel thickness determination for the FlFFF, have been investigated. This is the first comprehensive comparison of the two FFF techniques for characterizing non-standard particulate materials. The two FFF techniques proved to be complementary and gave good, congruent and very useful information on the size distributions of the five poly(lactic acid) particle samples.     

Identification and characterization of organic nanoparticles in food

Interest in nanoparticles (NPs) has increased explosively over the past two decades. Using NPs, high loadings of vitamins and health-benefit actives can be achieved in food, and stable flavors as well as natural food-coloring dispersions can be developed. Detection and characterization of NPs are essential in understanding the benefits as well as the potential risks of the application of such materials in food. While many such applications are described in the literature, methods for detection and characterization of such particles are lacking. Organic NPs suitable for application in food are lipid-, protein- or polysaccharide-based particles, and this review describes current analytical techniques that are used, or could be used, for identification and characterization of such particles in food products. We divide the analytical approaches into four sections: sample preparation; separation; imaging; and, characterization.We discuss techniques and reported applications for NPs or otherwise related particle compounds. The results of this investigation show that, for a successful characterization of NPs in food, at least some kind of sample preparation will be required. While a simple sample preparation may be satisfactory for imaging techniques for known analytes, for other techniques, a further separation using chromatography, field-flow fractionation or ion-mobility separation is necessary. Subsequently, photon-correlation spectroscopy and especially mass spectrometry techniques as matrix-assisted laser desorption/ionization combined with time-of-flight mass spectrometry, seem suitable techniques for characterizing a wide variety of organic NPs.     

Separation and characterization of nanoparticles in complex food and environmental samples by field-flow fractionation

The thorough analysis of natural nanoparticles (NPs) and engineered NPs involves the sequence of detection, identification, quantification and, if possible, detailed characterization. In a complex or heterogeneous sample, each step of this sequence is an individual challenge, and, given suitable sample preparation, field-flow fractionation (FFF) is one of the most promising techniques to achieve relevant characterization.The objective of this review is to present the current status of FFF as an analytical separation technique for the study of NPs in complex food and environmental samples. FFF has been applied for separation of various types of NP (e.g., organic macromolecules, and carbonaceous or inorganic NPs) in different types of media (e.g., natural waters, soil extracts or food samples).FFF can be coupled to different types of detectors that offer additional information and specificity, and the determination of size-dependent properties typically inaccessible to other techniques. The separation conditions need to be carefully adapted to account for specific particle properties, so quantitative analysis of heterogeneous or complex samples is difficult as soon as matrix constituents in the samples require contradictory separation conditions. The potential of FFF analysis should always be evaluated bearing in mind the impact of the necessary sample preparation, the information that can be retrieved from the chosen detection systems and the influence of the chosen separation conditions on all types of NP in the sample. A holistic methodological approach is preferable to a technique-focused one.     

Separation of mitochondria by flow field-flow fractionation for proteomic analysis

Flow field-flow fractionation (FlFFF) has been utilized for size-based separation of rat liver mitochondria. Collected fractions of mitochondria of various sizes were examined by confocal microscopy, and mitochondria of each fraction were lysed and analyzed by two-dimensional polyacrylamide gel electrophoresis (2D-PAGE) for the comparison of protein patterns in differently sized mitochondria by densitometric measurements, and for protein characterization of some gel spots with nanoflow liquid chromatography-electrospray ionization-tandem mass spectrometry (nLC-ESI-MS-MS). FlFFF fractions of the mitochondria were also tryptically digested for shotgun proteomic characterization of mitochondrial proteins/peptides by nLC-ESI-MS-MS. Peak area (integrated ion counts) of some peptides extracted from LC-MS chromatograms were examined at different fractions for the quantitative comparison. Among 130 proteins, 105 unique proteins were found to be mitochodrial from the off-line combination of FlFFF and nLC-ESI-MS-MS analysis. It also showed that 23 proteins were found in all fractions but some proteins were found exclusively in certain fractions. Among 25 proteins listed from other subcellular species, seven proteins were known to exist in mitochondria as well as in other subcellular locations, which may support the possible translocation or multiple localizations of proteins among organelles. This study demonstrated effective use of FlFFF for the isolation and/or enrichment of intact mitochondria isolated from cells, as well as its potential use for the fractionation of other subcellular components in the framework of subcellular functional proteomics.     

Detection,characterization and quantification of inorganic engineered nanomaterials: A review of techniques and methodological approaches for the analysis of complex samples

The increasing demand of analytical information related to inorganic engineered nanomaterials requires the adaptation of existing techniques and methods, or the development of new ones. The challenge for the analytical sciences has been to consider the nanoparticles as a new sort of analytes, involving both chemical (composition, mass and number concentration) and physical information (e.g. size, shape, aggregation). Moreover, information about the species derived from the nanoparticles themselves and their transformations must also be supplied. Whereas techniques commonly used for nanoparticle characterization, such as light scattering techniques, show serious limitations when applied to complex samples, other well-established techniques, like electron microscopy and atomic spectrometry, can provide useful information in most cases. Furthermore, separation techniques, including flow field flow fractionation, capillary electrophoresis and hydrodynamic chromatography, are moving to the nano domain, mostly hyphenated to inductively coupled plasma mass spectrometry as element specific detector. Emerging techniques based on the detection of single nanoparticles by using ICP-MS, but also coulometry, are in their way to gain a position. Chemical sensors selective to nanoparticles are in their early stages, but they are very promising considering their portability and simplicity. Although the field is in continuous evolution, at this moment it is moving from proofs-of-concept in simple matrices to methods dealing with matrices of higher complexity and relevant analyte concentrations. To achieve this goal, sample preparation methods are essential to manage such complex situations. Apart from size fractionation methods, matrix digestion, extraction and concentration methods capable of preserving the nature of the nanoparticles are being developed. This review presents and discusses the state-of-the-art analytical techniques and sample preparation methods suitable for dealing with complex samples. Single- and multi-method approaches applied to solve the nanometrological challenges posed by a variety of stakeholders are also presented.     

Characterization of silver nanoparticles using flow-field flow fractionation interfaced to inductively coupled plasma mass spectrometry

The ability to detect and identify the physiochemical form of contaminants in the environment is important for degradation, fate and transport, and toxicity studies. This is particularly true of nanomaterials that exist as discrete particles rather than dissolved or sorbed contaminant molecules in the environment. Nanoparticles will tend to agglomerate or dissolve, based on solution chemistry, which will drastically affect their environmental properties. The current study investigates the use of field flow fractionation (FFF) interfaced to inductively coupled plasma-mass spectrometry (ICP-MS) as a sensitive and selective method for detection and characterization of silver nanoparticles. Transmission electron microscopy (TEM) is used to verify the morphology and primary particle size and size distribution of precisely engineered silver nanoparticles. Subsequently, the hydrodynamic size measurements by FFF are compared to dynamic light scattering (DLS) to verify the accuracy of the size determination. Additionally, the sensitivity of the ICP-MS detector is demonstrated by fractionation of μg/L concentrations of mixed silver nanoparticle standards. The technique has been applied to nanoparticle suspensions prior to use in toxicity studies, and post-exposure biological tissue analysis. Silver nanoparticles extracted from tissues of the sediment-dwelling, freshwater oligochaete Lumbriculus variegatus increased in size from approximately 31-46nm, indicating a significant change in the nanoparticle characteristics during exposure.     

Fractionation and characterization of nano- and microparticles in liquid media

Submicron and micron particles present in liquid environmental, biological, and technological samples differ in their dimensions, shape, mass, chemical composition, and charge. Their properties cannot be reliably studied unless the particles are fractionated. Synthetic particles applied as components of analytical systems may also need preliminary fractionation and investigation. The review is focused on the methods for fractionation and characterization of nanoparticles and microparticles in liquid media, the most representative examples of their application, and the trends in developing novel approaches to the separation and investigation of particles. Among the separation techniques, the main attention is devoted to membrane filtration, field-flow fractionation, chromatographic, and capillary electrokinetic methods. Microfluidic systems employing the above-mentioned and other separation principles and providing a basis for the fabrication of lab-on-chip devices are also examined. Laser light scattering methods and other physical techniques for the characterization of particles are considered. Special attention is given to “hyphenated” techniques which enable the separation and characterization of particles to be performed in online modes.     

Characterization of functionalized styrene-butadiene rubber by flow field-flow fractionation/light scattering in organic solvent

Flow field-flow fractionation (FlFFF) using an organic solvent as mobile phase has been effectively utilized for the separation and characterization of functionalized styrene-butadiene rubbers (SBR) that are polymerized and followed by coupling reaction in solution. Separation of broad molecular weight SBR was accomplished by an asymmetrical FlFFF channel in THF under field programming and the molecular weight distribution (MWD) of the SBR sample was determined by on-line measurement of light scattering. In this study, FlFFF has been utilized to characterize high-MW functionalized SBR from the low-MW non-functionalized molecules which were used for coupling reaction to produce high-MW functionalized SBRs, and to determine the coupling number of the functionalized SBRs depending on the type of the coupling reagents. The resulting MWD of the SBR samples prepared by the different coupling reagents (SnCl(4) and a polydimethylsiloxane compound) were compared.     

Separation and characterization of particles in natural water and soil using flow field-flow fractionation

Flow field-flow fractionation (FlFFF) is used to characterize particles in natural water (ground and surface water) and soil. The opposed flow sample concentration (OFSC) mode of FlFFF (OFSC-FlFFF) is employed, where the colloidal sample is continuously fed into the channel so that the particles are focused into a narrow band near the inlet of the FlFFF channel before the separation is initiated. There is no need for stopping the flow for the sample relaxation, which is usually required in conventional FlFFF operations. First, the OFSC-FlFFF is tested with mixtures of polystyrene latex spheres. Then the OFSC-FlFFF procedure is optimized for the analysis of particles in natural water and soil by varying various experimental parameters including the flow rates. Ground water of up to 100 mL has been successfully loaded, concentrated, and characterized by OFSC-FlFFF. Results show that the OFSC-FlFFF provides a simplified alternative to existing off-line concentration procedures, and it shows high potential for application to analysis of dilute colloidal particles in environmental water. The composition of the samples was analyzed using atomic absorption spectrometry.     

Continuous split-flow thin cell and gravitational field-flow fractionation of wheat starch particles

The combined employment of the SPLITT (split-flow thin) cell--a relatively new system for fast, continuous binary separation--and of gravitational field-flow fractionation (GrFFF)--a fractionation technique suitable for micron particle size distribution determination--was investigated for starch separation and characterization. Emphasis is placed on the main advantages of both techniques: operating under gentle earth gravity field, low cost and ease of maintenance. The reproducibility of GrFFF is demonstrated. Both the SPLITT separation and GrFFF fractionation results were checked by optical microscopy. Application examples of typical starch fractionation experiments are reported and discussed.     

Monitoring the growth of polyoxomolybdate nanoparticles in suspension by flow field-flow fractionation

We follow the evolution of polyoxomolybdate nanoparticles in suspensions derived from the keplerate (NH4)42[MoVI72MoV60O372(CH3CO2)30(H2O)72].ca..300H2O.ca..10CH3CO2NH4 ({Mo132}) by flow field-flow fractionation (FlFFF) to monitor the particle-size distribution in situ, atomic force and high-resolution transmission electron microscopy (AFM, SEM, and HRTEM) to confirm particle sizes, inductively coupled plasma-optical emission spectrometry (ICP-OES) to determine the Mo content of the FlFFF-separated fractions, and UV/visible spectroscopy to confirm the identity of the species in suspension. We observe the formation of 3-75-nm polyoxomolybdate particles in suspension and the dynamic growth of {Mo132} crystals.     

无固定相分离-电感耦合等离子体质谱法在环境中痕量金属纳米颗粒分析中的应用

环境中金属纳米颗粒的分析检测不仅需要关注其浓度和化学组成,还需要对其形状、粒径和表面电荷等进行表征.此外,环境中金属纳米颗粒的分析需要解决其低赋存浓度以及复杂基质干扰的难题.无固定相分离技术与电感耦合等离子体质谱(ICP-MS)的在线联用,具有较强的颗粒分离能力和较低的元素检出限,能够快速准确地提供金属纳米颗粒的粒径分...     

Hyperlayer separation in hollow fiber flow field-flow fractionation: effect of membrane materials on resolution and selectivity

Hollow fiber flow FFF (HF FlFFF) has recently shown its capability to separate and characterize the size of submicrometer particles and has demonstrated the potential to be developed into a disposable flow FFF channel. In this work, HF FlFFF was used for the hyperlayer separation of micron-sized particles and the separation capability was examined by using various hollow fiber membrane materials (Polysulfones, cPVC, and PAN). From the experiments, PAN (polyacrylonitriles) showed an outstanding performance in particle separation compared to the other membranes. By orienting the fiber module in an upright direction, the upstream flow migration reduced band broadening of eluted peaks. When the efficiency of the PAN hollow fiber system was tested by varying the ratio of outflow-rate to radial flow-rate, it was found that optimum separation in hyperlayer HF FlFFF can be obtained at the ratio of about 6–7. From the examination of retention at or around steric inversion diameter, it was observed that experiments showed a good agreement with predictions by semi-empirical calculation. In hyperlayer HF FlFFF the diameter based selectivity values were shown to be 1.2–1.7 depending on the type of membranes and the field strength (the radial flow-rate) conditions.