Selective sensing of Cu2+ ion by naphthalene based Schiff base

Research is going on to synthesize materials for acting as sensors of metal ions and are also published in different journals but the cause for sensing has not been clearly explained. In this paper, the reason for selective sensing of Cu²⁺ ions has been explained. A novel Schiff base fluorescent probe 3-[(2-hydroxy-naphthalen-1-ylmethylene)-hydrazono]-butan-2-one oxime (NPTH) was designed and synthesized to use as Cu²⁺ sensor. From our recent experiments, it has been found that only Cu²⁺ among different metal ions has been sensed by the synthesized ligand. The reason for selection and sensing of Cu²⁺ by the ligand was established by different spectroscopic techniques. The detection limit of NPTH was calculated as low as 4.11 ​× ​10^-4M for Cu²⁺. Therefore, these results indicate that sensor NPTH has great prospective to detect Cu²⁺ ion in environmental analysis systems. Density functional theory (DFT) calculations have been done to ascertain the ground state geometry of NPTH.     

Copper (II) ion selective liquid membrane electrode based on new Schiff base carrier

Cu2+ selective PVC membrane electrode based on new Schiff base 2, 2'-[1,9 nonanediyl bis (nitriloethylidyne)]-bis-(1-naphthol) as a selective carrier was constructed. The electrode exhibited a linear potential response within the activity range of 1.0 x 10(-6) - 5.0 x 10(-3) moll(-1) with a Nernstian slope of 29 +/- 1 mV decade(-1) of Cu2+ activity and a limit of detection 8.0 x 10(-7) mol l(-1). The response time of the electrode was fast, 10 s, and stable potentials were obtained within the pH range of 3.5- 6.5. The potentiometric selectivity coefficients were evaluated using two solution method and revealed no important interferences except for Ag+ ion. The proposed electrode was applied as an indicator electrode to potentiometric titration of Cu2+ ions and determination of Cu2+ content in real samples such as black tea leaves and multivitamin capsule.     

Manganese (II) selective PVC based membrane sensor using a Schiff base

N,N′,N″,N′′′-1,5,8,12-tetraazadodecane-bis(salicylaldiminato)(H₂L) has been used as ionophore for preparing Mn²⁺ selective sensor. Membranes of different composition with regard to ratio of H₂L:PVC:NPOE:NaTPB have been prepared and investigated. The best performance was obtained with the membrane of composition 10:150:150:10 (H₂L:PVC:NPOE:NaTPB) (w/w; mg). This membrane generated linear potential response in the concentration range of 5.0 × 10⁻⁶ to 1.0 × 10⁻¹ M with a Nernstian slope of 30.0 mV/decade of activity and fast response time (10 s). Hydrogen ion does not effect to the performance of sensor in the pH range 3.0-6.5. The sensor was found to be sufficient selective for Mn²⁺ over a number of alkali, alkaline and heavy metal ions and could therefore be used for the determination of manganese in various samples by direct potentiometry.     

Blue-emitting mesoporous films prepared via incorporation of luminescent Schiff base zinc(II) complex

Highly fluorescent materials have been prepared by incorporation of a zinc complex in mesoporous silica thin films with ordered pore structure. The zinc complex has been introduced into the mesoporous materials via impregnation in an ethanol solution. The incorporation into the films has been monitored by UV–Vis, Fourier transform infrared spectroscopy and spectroscopic ellipsometry. After 18 h of immersion in the doping solution the films showed strong blue emission, increase in the refractive index. Leaching experiments performed by immersing the samples in ethanol or tetrahydrofuran have shown that the chromophore is retained in the porous matrix.

PVC-based Cu (II)-Schiff base complex membrane coated graphite electrode for the determination of the triiodide ion

A triiodide-selective electrode based on copper (II)-Schiff base complex as a membrane carrier is proposed. The electrode was prepared by incorporating the carrier into a plasticized polyvinylchloride (PVC) membrane and was directly coated on the surface of a graphite electrode. The obtained electrode showed a near Nernstian slope of 57.0 ± 0.4 mV/decade to I ₃ ⁻ ions over an activity range of 1.0 × 10⁻⁵−1.0 × 10⁻¹ M with a limit of detection of 4.8 × 10⁻⁶ M. The response time of the electrode was fast (5 s) and the electrode could be used for about 2 months without considerable divergence in response. The potentiometric selectivity coefficients were evaluated and displayed anti-Hofmeister behavior. The electrode was used as an indicator electrode in the potentiometric titration of the triiodide ion and in the determination of ascorbic acid in vitamin C tablets. The text was submitted by the authors in English.     

A modern approach for the sensing of aqueous Al(III) ion by Ni(II) Salen‐type Schiff base complexes

In this work, we explore a modern concept of transmetalation (metal exchange) for the effective recognition of aqueous Al(III) ion. Three different Ni(II) salen‐type Schiff base complexes with different spacer diimine groups were prepared for the metal exchange reaction. These probes recognize Al(III) both colorimetically as well as fluorimetrically. The efficiency in sensing is mainly due to the low emission characteristics of the respective Ni(II) complexes which results in enhanced emission on the formation of Al(III) complex. The geometry of the central Ni(II) metal ion in the probe plays a pivotal role in the sensing action with the highest sensitivity being shown by the Ni(II) metal center with distorted square pyramidal geometry. Further DFT calculations and the energetics involved in the sensing mechanism via the formation of Al(III) complexes substantiates the experimental results.     

Adsorption of aqueous Cu(II) and Ag(I) by silica anchored Schiff base decorated polyamidoamine dendrimers: Behavior and mechanism

A class of silica anchored Schiff base decorated polyamidoamine (PAMAM) dendrimers were synthesized for removing aqueous Cu(II) and Ag(I). The adsorption performance was investigated synthetically and the adsorption mechanism was revealed. Results indicate the adsorption capacity depends on dendrimer generation, solution pH, contact time, temperature and initial metal ion concentration. The optimum adsorption pH is 6 for both metal ion. Adsorption kinetic suggests the adsorption can achieve equilibrium at 180 and 150 min for Cu(II) and Ag(I). The kinetic process is found to be in good agreement with pseudo-second-order model and film diffusion is the rate-controlling step. The adsorption isotherm indicates the adsorption is proceeded by monolayer behavior with chemical mechanism. These adsorbents exhibit competitive adsorption capacity as compared with other reported adsorbents. Theoretical calculation demonstrates the participation of hydroxyl, carbonyl, and amide groups during the adsorption of Cu(II), while hydroxyl and amide groups are mainly responsible for capturing Ag(I).     

Mercury(II) ion-selective polymeric membrane sensor based on a recently synthesized Schiff base

A new polyvinyl chloride (PVC) membrane electrode that is highly selective to Hg(II) ions was prepared by using bis[5-((4-nitrophenyl)azo salicylaldehyde)] (BNAS) as a suitable neutral carrier. The sensor exhibits a Nernstian response for mercury ions over a wide concentration range (5.0×10⁻²-7.0×10⁻⁷ M) with a slope of 30±1 mV per decade. It has a response time of <10 s and can be used for at least 3 months without any measurable divergence in potential. The electrode can be used in the pH range from 1.0 to 3.5. The proposed sensor shows fairly good discriminating ability towards Hg²⁺ ion in comparison with some hard and soft metals. The electrode was used in the direct determination of Hg²⁺ in aqueous solution and as an indicator electrode in potentiometric titration of mercury ions.     

Asymmetric Schiff base as carrier in PVC membrane electrodes for manganese (II) ions

Manganese(II) complex of (E)-2-(hydroxyl-5-methoxybenzylideneamino) phenol was synthesized and used as a suitable Mn(II) – selective membrane in PVC matrix. The plasticized membrane sensor exhibits a nersian response for Mn(II) ions over a wide concentration range of 6 × 10^?6–2 × 10^?2 M with slope of 29 ± 1 mV per decade. It has a response time of <11 s and can be used for 2 months without any measurable divergence in potential. The response of the proposed sensor is independent of pH between 4 and 9.5. The proposed sensor shows a fairly good discriminating ability towards Mn(II) in comparison with some hard and soft metals. The electrode was used in the determination of Mn(II) in aqueous solutions and as an indicator electrode in potentiometer titration of manganese ions against EDTA.     

Calix[4]pyrrole Schiff base macrocycles: novel binucleating ligands for Cu(I) and Cu(II)

New bimetallic copper(I) and copper(II) complexes of dipyrromethane-derived Schiff base macrocycles are reported. Two different structural motifs were identified, providing support for the notion that ligands of this type can support a variety of coordination modes. In the case of the Cu(I) complexes, the metal centers were found to have a distorted tetrahedral geometry and be coordinated to two imine nitrogens on each side of the ligand, with the exact structure depending on the choice of Schiff base macrocycle. In contrast to what is seen for Cu(I), with Cu(II) as the coordinated cation the Cu(II) metal centers assumed distorted square planar geometries, and both pyrrole N-Cu and imine N-Cu interactions were confirmed by single-crystal X-ray diffraction analysis. This structural analysis revealed a copper-copper distance of 3.47 A, while SQUID magnetic susceptibility data provided evidence for antiferromagnetic coupling between the two metal centers.     

New platinum(II) complexes with Schiff base ligands

Summary New neutral platinum complexes of Schiff bases or their hydrated derivatives were prepared and a new path to mixed ligand platinum(II) complexes is proposed. Reactions of [PtCl₄]^2– with multidentate Schiff bases give chelates which react further, resulting in cis-coordinated mixed N-donor ligand complexes. Structures are proposed on the basis of chemical analyses, electrical conductivities and i.r. studies.     

New metal(II) complexes with ceftazidime Schiff base

Complexes of Co(II), Ni(II) and Cu(II) with the Schiff base (LH) derived from ceftazidime and salicylaldehyde were synthesized. The proposed structures of the new metal complexes based on the results of elemental analyses, molar conductivity, IR, DRUV and ¹H NMR spectra, effective magnetic moment and thermal analysis were discussed. The surface morphology of Schiff base and metal complexes was studied by SEM. The composition of the metal complexes was ML₂, where L is the deprotonated Schiff base ligand and M = Co(II), Ni(II) and Cu(II). IR spectral data indicated the Schiff base ligand being bidentately coordinated to the metallic ions with N and O atoms from azomethine and phenolic groups. All the complexes have square-planar geometry and are nonelectrolytes. The thermal analysis recorded that TG, DTG, DTA and DSC experiments confirmed the assigned composition and gave information about the thermal stability of complexes in dynamic air atmosphere. Theoretical investigation of the molecular structure of Schiff base ligand and its complexes was studied using programs dedicated to chemical modeling and quantomolecular calculation of chemical properties. The newly synthesized complexes were tested for in vitro antibacterial activity against selected Gram-negative and Gram-positive bacterial strains, and they exhibited an antibacterial activity superior to that of the Schiff base ligand.     

Solid phase extraction of copper (II) by sorption on octadecyl silica membrane disk modified with a new Schiff base and determination with atomic absorption spectrometry

A simple, selective and reliable method for rapid extraction and determination of trace amounts of Cu (II) ions from aqueous samples using octadecyl-bonded silica membrane disks modified with bis-(3-methoxy salicylaldehyde)-1,6-diaminohexane and flame atomic absorption spectrometry (FAAS) is presented. Extraction efficiency, the influence of pH, flow rates, amount of ligand, and type and least amount of eluant were investigated. The linear dynamic range of the proposed method for Cu (II) ions was found in a wide concentration range of 1.0 (± 0.2)–150 (± 2) μg l^− 1. The detection limit and preconcentration factor of this method were found 30.0 (± 0.7) ng l^− 1 and 100 respectively. The reproducibility of the procedure is at the most 2.0%. The effects of various cationic interferences on the percent recovery of copper ion were studied. The method was used to the recovery of copper ion from different synthetic, alloys and biological samples.     

Adsorption performance and mechanism of Schiff base functionalized polyamidoamine dendrimer/silica for aqueous Mn(II) and Co(II)

Schiff base functionalized polyamidoamine (PAMAM) dendrimer/silica were prepared for the adsorption of aqueous Mn(II) and Co(II). The effects that influence the adsorption were investigated systematically and the adsorption mechanism was illustrated by theoretical calculation. The optimum adsorption pH are 4 and 6 for Mn(II) and Co(II). Adsorption kinetics follow pseudo-second-order model and the rate-controlling step is film diffusion process. Adsorption isotherm shows that high initial metal ion concentration facilitates the uptake of metal ions. The adsorption capacity increases first and then decreases in the temperature range of 15–35 °C. Density functional theory (DFT) calculation demonstrates that Schiff base functionalized PAMAM dendrimer tends to coordinate Mn(II) and Co(II) with the oxygen atoms of hydroxyl and carbonyl groups, nitrogen of tertiary amine and imino groups. The imino and tertiary amine groups mainly dominate the adsorption. The reproducibility of the adsorbents indicates they can be regenerated by 5% thiourea and 0.5 mol/L HNO₃ solution efficiently.     

Schiff base complexes of ruthenium(II) with tridentateN-methyl-S-methyldithiocarbazate ligands

Summary Schiff bases (HL) produced by the condensation ofN-methyl-S-methyldithiocarbazate with -diketones and aromatic aldehydes or ketones react with [RuHClCO(PPh₃)₃] to yield hexacoordinated complexes of the type [RuClCO(PPh₃)₂(L)]. These Schiff bases react with [RuCl₂{P(OR)₃}₄] in 11 molar ratio to yield [RuCl{P(OR)₃}₂(L)] in which L is a tridentate. The chlorine atom in the complex can be removed in coordinating solvents in the presence of anions such as [BPh₄]^– to give cationic complexes. Bis chelate complexes, [Ru{P(OR)₃}₂(L)₂] are prepared from 12 molar proportions of the reactants. These complexes were characterised by elemental analyses, i.r.,¹H n.m.r., u.v. and conductivity studies.NCL Communication No. 4224.     

An iron Schiff base complex loaded mesoporous silica nanoreactor as a catalyst for the synthesis of pyrazine-based heterocycles

An iron Schiff base complex was encapsulated in SBA-15 mesoporous silica to afford a Fe(III)-Schiff base/SBA-15 heterogeneous nanocatalyst for the synthesis of pyridopyrazine and quinoxaline heterocycles. These reactions proceeded in water with excellent yields. The catalyst was characterized by physico-chemical and spectroscopic methods and found to retain the characteristic channel structures of the SBA-15, allowing good accessibility of the encapsulated metal complex.     

Multifunctional magnetic mesoporous silica nanocomposites with improved sensing performance and effective removal ability toward Hg(II)

In the present work, a multifunctional inorganic-organic hybrid nanomaterial (MMS-Py) was prepared by the immobilization of a pyrene-based receptor (Py) within the channels of magnetic mesoporous silica nanocomposites (MMS), and characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, N(2) adsorption/desorption, superconducting quantum interference device, and photoluminescence spectra. This multifunctional nanomaterial exhibits superparamagnetic behavior, ordered mesoporous characteristics, and significantly improved fluorescence sensing properties that allow for highly sensitive and reproducible Hg(2+) detection. The fluorogenical responses of MMS-Py are stable over a broad pH range. A detection limit of 1.72 ppb is obtained, which is 2 orders of magnitude lower than that based on bulk mesoporous materials. Additionally, this nanomaterial shows high performance in convenient magnetic separability and efficient removal of Hg(2+). These results indicate that these multifunctional nanocomposites may find potential applications for simple detection and easy removal of Hg(2+) in biological, toxicological, and environmental areas.     

Copper(II) and nickel(II) complexes of a neutral pentadentate Schiff base

A new pentadentate Schiff base 2,6,10-triaza-1,11-bis(2′-aminophenyl)-undeca-1,10-diene, abaDPT, and its complexes of general formula M(abaDPT)X₂ where M = Cu(II), Ni(II), X = Cl, Br, I, NO₃ and ClO₄, have been prepared. The complexes have been characterized by electronic and IR spectra, EPR, magnetic moments, molar conductances, and elemental analysis. IR data show an interaction between halide anion of the outer coordination sphere and the complexed amino group. EPR and spectrophotometric data of most of the copper compounds are consistent with a distorted square pyramidal geometry. Single crystal EPR studies of Cu(abaDPT)(NO₃)₂ and Cu(abaDPT)Br₂ revealed that copper atoms in the former compound occupy two magnetically inequivalent places in the lattice while copper atoms in the latter compound take identical sites. Principal g tensor axes of the two compounds have been determined.