Condensation of aldehydes and ketones

The Mannich reaction with methylene- and benzylidenediacetophenones has given: 1,3-dibenzoyl-4-piperidinobutane, 1,3-dibenzoyl-4-morpholinobutane, 1,3-dibenzoyl-4-diethylamino-2-phenylbutane, 1,3-dibenzoyl-2-phenyl-4-piperidinobutane, 1,3-dibenzoyl-4-diethylaminobutane, and 1,3-dibenzoyl-4-dimethylamino-2-phenylbutane. From the latter two compounds, 3-diethylaminomethyl-2,6-diphenylpyridine and 3-dimethylaminomethyl-2,4,6-triphenylpyridine have been obtained.For part XVII, see [7].     

Reactions of selenium dichloride and dibromide with divinyl selenide: synthesis of novel selenium heterocycles and rearrangement of 2,6-dihalo-1,4-diselenanes

The synthesis of novel selenium heterocycles, 2,6-dihalo-1,4-diselenanes, 4-halo-2-halomethyl-1,3-diselenolanes and 2-halomethyl-1,3-diselenoles, based on the reactions of selenium dichloride and dibromide with divinyl selenide is described. The spontaneous rearrangement of 2,6-dihalo-1,4-diselenanes to 4-halo-2-halomethyl-1,3-diselenolanes is observed. Distillation of 4-chloro-2-chloromethyl-1,3-diselenolane leads to regioselective dehydrochlorination and the formation of 2-chloromethyl-1,3-diselenole.     

Amidophenacylating reagents in synthesis of new derivatives of 1,3-oxazole- and 1,3-thiazole-4-sulfonyl chlorides and corresponding sulfonamides

Derivatives of 4-benzylsulfanyl-1,3-oxazole and 4-benzylsulfanyl-1,3-thiazole were synthesized using available amidophenacylating reagents. By the oxidative chlorination compounds obtained were converted to 1,3-oxazole-4-sulfonyl and 1,3-thiazol-4-sulfonyl chlorides. The latter were used to prepare the corresponding sulfonamides.     

Oxidation of 1,3-Dioxacyclanes with Oxone and Potassium Persulfate Catalyzed by 2,2,5,5-Tetramethyl-4-Phenyl-3-Imidazoline-3-Oxide-1-Oxyl

The catalytic effect of 2,2,5,5-tetramethyl-4-phenyl-3-imidazoline-3-oxide-1-oxyl on the oxidation of 2-isopropyl-1,3-dioxolane, 2-phenyl-1,3-dioxolane, 2-phenyl-4-chlormethyl-1,3-dioxolane, 2-isopropyl-1,3-dioxane, 2-isopropyl-4-methyl-1,3-dioxane, 2-phenyl-1,3-dioxane, 2-phenyl-4-methyl-1,3-dioxane with oxone and potassium persulfate is reported. The corresponding glycol monoesters were obtained with yields of 90-100%.     

Relative reactivities of cyclic ketene acetals via cationic 1,2-vinyl addition copolymerization1

The relationship between the relative reactivities of ten cyclic ketene acetals and their structures was determined via cationic copolymerizations of eight different monomer pairs. Thus, 2-methylene-1,3-dioxolane (1) was copolymerized with 2-methylene-4-methyl-1,3-dioxolane (2), 2-methylene-4,5-dimethyl-1,3-dioxolane (3), 2-methylene-4,4,5,5-tetramethyl-1,3-dioxolane (4), 2-methylene-4-phenyl-1,3-dioxolane (5), and 2-methylene-4-(t-butyl)-1,3-dioxolane (6). Also 2-methylene-1,3-dioxane (7) was copolymerized with 2-methylene-4-methyl-1,3-dioxane (8), 2-methylene-4,4,6-trimethyl-1,3-dioxane (9), and 2-methylene-4-isopropyl-5,5-dimethyl-1,3-dioxane (10). The relative reactivities of these monomers are: 3 > 5 > 4 > 2 > 1 > 6; and 10 > 9 > 8 > 7. In spite of steric demands, substituents at the 4- or 5-positions in 2-methylene-1,3-dioxolane and substituents at the 4- or 6-positions in 2-methylene-1,3-dioxane serve to increase the copolymerization reactivity. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2841–2852, 1999     

Generation of acyloxyketenes from unstable mesoionic 1,3-dioxolium-4-olates and their reaction with ketenophiles to give [2 + 2] cycloadducts

Fast ring opening of mesoionic 1,3-dioxolium-4-olates, generated by Rh(2)(OAc)(4)-catalyzed decomposition of phenyldiazoacetic anhydride derivatives, to acyloxyphenylketenes was demonstrated by trapping the ketenes with several ketenophiles. Reactions of phenyldiazoacetic anhydride derivatives with several ketenophiles such as dihydrofuran, carbodiimides, and imines were carried out. No 1,3-dipolar cycloadducts of the latter with 1,3-dioxolium-4-olates were observed. Instead, only their [2 + 2]-cycloadducts with the acyloxyketenes generated by ring-opening of the initially formed 1,3-dioxolium-4-olates were isolated. In the reaction with cyclopentadiene, 1,3-dipolar cycloadducts with 1,3-dioxolium-4-olates were formed as main products along with the [2 + 2]-ketene adduct. PM3 calculation of heats of formation of 2,5-diphenyl-1,3-dioxolium-4-olate and the corresponding benzoyloxyphenylketene indicates that the ring-opened acyloxyketenes are ca. 9 kcal/mol more stable than the corresponding 1,3-dioxolium-4-olates.     

Assessment of the in vivo genotoxicity of new lead compounds to treat sickle cell disease

The compounds 1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)methyl nitrate (C1), (1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)ethyl nitrate (C2), 3-(1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)benzyl nitrate (C3), 4-(1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)-N-hydroxy-benzenesulfonamide (C4), 4-(1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)benzyl nitrate (C5), and 2-[4-(1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)phenyl]ethyl nitrate (C6) were evaluated with a micronucleus test using mouse peripheral blood to identify new candidate drugs for the treatment of sickle cell disease (SCD) that are safer than hydroxyurea. The compounds induced an average frequency of micronucleated reticulocytes (MNRET) of less than six per 1,000 cells at 12.5, 25, 50, and 100 mg/kg, whereas hydroxyurea induced an average MNRET frequency of 7.8, 9.8, 15, and 33.7 per 1000 cells respectively, at the same concentrations. Compounds C1-C6 are new non-genotoxic in vivo candidate drugs for the treatment of SCD symptoms.     

Zur Synthese sulfonierter Derivate von 4-Amino-1,3-dimethylbenzol und 2-Amino-1,3-dimethylbenzol

Syntheses of Sulfonated Derivatives of 4-Amino-1, 3-dimethylbenzene and 2-Amino-1, 3-dimethylbenzene Direct sulfonation of 4-amino-1, 3-dimethylbenzene (1) and sulfonation of 4-nitro-1,3-dimethylbenzene ( 4 ) to 4-nitro-1,3-dimethylbenzene-6-sulfonic acid ( 3 ) followed by reduction yield 4-amino-1,3-dimethylbenzene-6-sulfonic acid ( 2 ). The isomeric 5-sulfonic acid ( 5 ) however is prepared solely by baking the acid sulfate salt of 1 . Reaction of sulfur dioxide with the diazonium chloride derived from 2-amino-4-nitro-1,3-dimethylbenzene ( 7 ) leads to 4-nitro-1,3-dimethylbenzene-2-sulfonyl chloride ( 8 ), which is successively hydrolyzed to 4-nitro-1,3-dimethylbenzene-2-sulfonic acid ( 9 ) and reduced to 4-amino-1, 3-dimethylbenzene-2-sulfonic acid ( 6 ). Treatment of 4-amino-6-bromo-1,3-dimethylbenzene ( 12 ) and 4-amino-6-chloro-1, 3-dimethylbenzene ( 13 ), the former obtained by reduction of 4-chloro-6-nitro-1,3-dimethyl-benzene ( 10 ) and the latter from 4-chloro-6-nitro-1, 3-dimethylbenzene ( 11 ), with oleum yield 4-amino-6-bromo-1,3-dimethylbenzene-2-sulfonic acid ( 14 ) and 4-amino-6-chloro-1,3-dimethylbenzene-2-sulfonic acid ( 15 ) respectively; subsequent carbon-halogen hydrogenolyses of 14 and 15 lead also to 6 (Scheme 1). Baking the acid sulfate salt of 2-amino-1, 3-dimethylbenzene ( 17 ) gives 2-amino-1, 3-dimethylbenzene-5-sulfonic acid ( 16 ), whereas the isomeric 4-sulfonic acid ( 18 ) can be prepared by either of the following three possible pathways: Sulfonation of 2-nitro-1,3-dimethylbenzene ( 20 ) to 2-nitro-1,3-dimethylbenzene-4-sulfonic acid ( 21 ) followed by reduction or sulfonation of 2-acetylamino-1,3-dimethylbenzene ( 19 ) to 2-acetylamino-1,3-dimethylbenzene-4-sulfonic acid ( 22 ) with subsequent hydrolysis or direct sulfonation of 17 . Further sulfonation of 18 yields 2-amino 1,3-dimethylbenzene-4,6-disulfonic acid ( 23 ), the structure of which is independently confirmed by reduction of unequivocally prepared 2-nitro- 1,:3-dimethylbenzene-4,6-disulfonic acid ( 24 )(Scheme 2).     

Preparation and radical ring-opening polymerization of 2-substituted-4-methylene-1,3-dioxolanes

2-Methyl-2-phenyl-4-methylene-1,3-dioxolane ( IIa ), 2-ethyl-2-phenyl-4-methylene-1,3-dioxolane ( IIb ), 2-phenyl-2-(n-propyl)-4-methylene-1,3-dioxolane ( IIc ), 2-phenyl-2-(i-propyl)-4-methylene-1,3-dioxolane ( IId ), 2-(n-heptyl)-2-phenyl-4-methylene-1,3-dioxolane ( IIe ), 2-methyl-2-(2-naphthyl)-4-methylene-1,3-dioxolane ( IIf ), and 2,2-diphenyl-4-methylene-1,3-dioxolane ( IIg ) were prepared and polymerized in the presence of a radical initiator. IIa–IIf were found to undergo vinyl polymerization with ring-opening reaction accompanying the elimination of ketone groups in bulk. IIg was found to undergo the quantitative ring-opening reaction accompanying the elimination of benzophenone in solution to obtain polyketone without any side reaction.     

Synthesis and conformational evaluation of p-tert-butylthiacalix[4]arene-crowns

Bridging of p-tert-butylthiacalix[4]arene afforded 1,3-dihydroxythiacalix[4]arene-monocrown-5 (3b), 1,2-alternate thiacalix[4]arene-biscrown-4 and -5 (4a,b), and 1,3-alternate thiacalix[4]arene-biscrown-5 and -6 (5a,b), depending on the metal carbonates and oligoethylene glycol ditosylates used. Starting from 1,3-dialkylated thiacalix[4]arenes, the corresponding bridging reaction gave 1,3-alternate, partial-cone, and cone conformers 10-19, depending on the substituents present. Temperature-dependent studies revealed that the conformationally flexible 1,3-dimethoxythiacalix[4]arene-crowns 10a-c exclusively occupy the 1,3-alternate conformation. Demethylation exclusively gave the cone 1,3-dihydroxythiacalix[4]arene-crowns (3a,c), which could not be obtained by direct bridging of thiacalix[4]arene. The different structures were assigned on the basis of several X-ray crystal structures and extensive 2-D (1)H NMR studies.     

Synthesis of New 1,3-Thiazolecarbaldehydes

H-Lithiation and Br-lithiation reactions of 1,3-thiazole were studied in order to obtain new thiazole derivatives. Four isomeric chloromethyl derivatives of 1,3-thiazole containing a protected aldehyde group like 2-(1,3-dioxolan-2-yl)-5-(chloromethyl)-1,3-thiazole, 5-(1,3-dioxolan-2-yl)-2-(chloromethyl)-1,3-thiazole, 4-(1,3-dioxolan-2-yl)-2-(chloromethyl)-1,3-thiazole, and 2-(1,3-dioxolan-2-yl)-4-(chloromethyl)-1,3-thiazole were synthesized. Their nucleophilic substitution reactions with dimethylamine and sodium methylthiolate were studied. New aldehydes of 1,3-thiazole series of low-molecular weight were obtained.     

Synthesis and characterization of triazenide and triazene complexes of ruthenium and osmium

Triazenide [M(eta2-1,3-ArNNNAr)P4]BPh4 [M = Ru, Os; Ar = Ph, p-tolyl; P = P(OMe)3, P(OEt)3, PPh(OEt)2] complexes were prepared by allowing triflate [M(kappa2-OTf)P4]OTf species to react first with 1,3-ArN=NN(H)Ar triazene and then with an excess of triethylamine. Alternatively, ruthenium triazenide [Ru(eta2-1,3-ArNNNAr)P4]BPh4 derivatives were obtained by reacting hydride [RuH(eta2-H2)P4]+ and RuH(kappa1-OTf)P4 compounds with 1,3-diaryltriazene. The complexes were characterized by spectroscopy and X-ray crystallography of the [Ru(eta2-1,3-PhNNNPh){P(OEt)3}4]BPh4 derivative. Hydride triazene [OsH(eta1-1,3-ArN=NN(H)Ar)P4]BPh4 [P = P(OEt)3, PPh(OEt)2; Ar = Ph, p-tolyl] and [RuH{eta1-1,3-p-tolyl-N=NN(H)-p-tolyl}{PPh(OEt)2}4]BPh4 derivatives were prepared by allowing kappa1-triflate MH(kappa1-OTf)P4 to react with 1,3-diaryltriazene. The [Os(kappa1-OTf){eta1-1,3-PhN=NN(H)Ph}{P(OEt)3}4]BPh4 intermediate was also obtained. Variable-temperature NMR studies were carried out using 15N-labeled triazene complexes prepared from the 1,3-Ph15N=N15N(H)Ph ligand. Osmium dihydrogen [OsH(eta2-H2)P4]BPh4 complexes [P = P(OEt)3, PPh(OEt)2] react with 1,3-ArN=NN(H)Ar triazene to give the hydride-diazene [OsH(ArN=NH)P4]BPh4 derivatives. The X-ray crystal structure determination of the [OsH(PhN=NH){PPh(OEt)2}4]BPh4 complex is reported. A reaction path to explain the formation of the diazene complexes is also reported.     

Synthesis of 1,2-benzisothiazolin-3-ones by ring transformation of 1,3-benzoxathiin-4-one 1-oxides

1,2-Benzisothiazolin-3-ones were synthesized from 1,3-benzoxathiin-4-one 1-oxides by means of a nonhazardous and inexpensive method. The 1,3-benzoxathiin-4-one 1-oxides were prepared by oxidation of 1,3-benzoxathiin-4-ones with hydrogen peroxide in the presence of a catalyst. Attack of amines on the carbonyl groups of the 1,3-benzoxathiin-4-one 1-oxides and subsequent elimination of carbonyl compounds likely produced sulfenic acids, which then underwent ring closure to afford the 1,2-benzisothiazolin-3-ones.     

Regiospecific iodocyclization of S-allyl dithiocarbamates: synthesis of 2-imino-1,3-dithiolane and 2-iminium-1,3-dithiolane derivatives

4-Alkyl-2-imino-1,3-dithiolanes and 4-alkyl-2-iminium-1,3-dithiolanes were prepared in excellent yields with complete regiospecificity under mild conditions by the iodocyclization of S-allyl dithiocarbamates. Dehydrohalogenation of the 4-alkyl-2-imino-1,3-dithiolanes gave 4-alkylidene-2-imino-1,3-dithiolanes in excellent yields.     

Synthesis of 1,3-dioxolane derivatives

Chloral cyanomethylhemiacetal is converted to 2-trichloromethyl-4-imino-1,3-dioxolane under the influence of hydrogen chloride or pyridine. Acetone cyanohydrin reacts with chloral to give 2-trichloromethyl-4-imino-5,5-dimethyl-1,3-dioxolane, the hydrochloride of which in water gives 2-trichloromethyl-4-oxo-5,5-dimethyl-1,3-dioxolane.     

Synthesis of Novel 1,3-Dioxolane Nucleoside Analogues

Novel 1,3-dioxolane C-nucleoside analogues of tiazofurin 2-(2-hydroxymethyl-1,3-dioxolan-4-yl)-1,3-thiazole4-carboxamide as well as N-nucleoside analogues of substituted imidazoles 1-(2-hydroxymethyl-1,3-dioxolan4-yl)-4-nitroimidazole and 1-(2-hydroxymethyl-1,3-dioxolan-4-yl)-4,5-dicyanoimidazole were synthesized from methyl acrylate through a multistep procedure. Their structures were confirmed by IR,^1H NMR,^13C NMR spectraand elemental analysis.     

N-thioacyl 1,3-amino alcohols: synthesis via ring-opening of oxiranes with thioamide dianions and applications as key intermediates leading to stereochemically defined 5,6-dihydro-4H-1,3-oxazines and 1,3-amino alcohols

N-Thioacyl 1,3-amino alcohols were synthesized via the ring-opening of oxiranes with thioamide dianions generated from N-benzyl thioamides and BuLi in a highly regio- and stereoselective manner. The diastereomers of N-thioacyl 1,3-amino alcohols were readily separated by column chromatography to give stereochemically defined N-thioacyl 1,3-amino alcohols. They underwent intramolecular cyclization with Bu4F and EtI to give 5,6-dihydro-4H-1,3-oxazines. The reaction was specific with anti-N-thioacyl 1,3-amino alcohols, and cis-5,6-dihydro-4H-1,3-oxazines were obtained with high efficiency, whereas the reaction of a syn-alcohol gave a thioimidate as a major product. The reduction of N-thioacyl 1,3-amino alcohols with LiAlH4gave N-alkyl 1,3-amino alcohols in high yields. The use of optically active propylene oxide as a starting material gave the corresponding oxazine and alcohols in optically pure forms.     

Selenium heterocycles. XXXI. Reaction of ethyl propiolate with 5-phenyl-2-thioxo-1,3-thiaselenole and 4-phenyl-2-thioxo-1,3-dithiole

Reaction of ethyl propiolate with 4-phenyl-2-thioxo-1,3-dithiole afforded 4-carbethoxy-2-thioxo-1,3-dithiole in high yield. Reaction of ethyl propiolate with 5-phenyl-2-thioxo-1,3-thiaselenole gave 4-carbethoxy-2-thioxo-1,3-thiaselenone (IX), 4-carbethoxy-2-selenoxo-1,3-dithiole (X) and 5-carbethoxy-2-thioxo-1,3-thiaselenole (XI). A possible mechanism for the formation of these compounds is given.     

Cationic polymerization of dimethyl-1,3-butadienes

The cationic polymerizations of dimethyl-1,3-butadienes with various catalysts in methylene chloride and toluene have been investigated. The activity of catalysts decreased in the order WCl₆ > AcClO₄ > SnCl₄·TCA > BF₃OEt₂. The homopolymerization rate of dimethyl-1,3-butadienes with WCl₆, AcClO₄, and SnCl₄·TCA decreased in the order 1,3-dimethyl-1,3-butadiene > 2,3-dimethyl-1,3-butadiene > 1,2-dimethyl-1,3-butadiene > 2,4-hexadiene. The polymers prepared with WCl₆, SnCl₄.TCA, and BF₃OEt₂ were rubberlike polymers or white powders, whereas those prepared with AcClO₄ were oily oligomers. The 1,4-propagation increased in the order 1,2-dimethyl-1,3-butadiene < 1,3-dimethyl-1,3-butadiene < 2,3-dimethyl-1,3-butadiene < 2,4-hexadiene. This order may indicate that the steric effect of methyl group determine primarily the microstructure of the polymer. The relative reactivity of dimethyl-1,3-butadienes toward a styryl cation decreased in the order 1,3-dimethyl-1,3-butadiene > 1,2-dimethyl-1,3-butadiene > 2,3-dimethyl-1,3-butadiene > 2,4-hexadiene. This order may be explained in terms of the stability of the resulting allylic cation.     

Synthesis of 4-alkoxy-4-methyl- and 4-alkoxy-4-fluoromethyl-1,3-benzoxazinones

Cyclization of 2-hydroxyacetophenone hydrazones with triphosgene resulted in the formation of 4-methylene-1,3-benzoxazinones. These compounds were converted to 4-alkoxy-4-methyl-1,3-benzoxazinones and 4-fluoromethyl-4-methoxy-1,3-benzoxazinones upon treatment with alcohols under refluxing conditions and F-TEDA-BF₄ in acetonitrile and methanol, respectively.