Deep Eutectic Solvents in Solar Energy Technologies

Deep Eutectic Solvents (DESs) have been widely used in many fields to exploit their ecofriendly characteristics, from green synthetic procedures to environmentally benign industrial methods. In contrast, their application in emerging solar technologies, where the abundant and clean solar energy is used to properly respond to most important societal needs, is still relatively scarce. This represents a strong limitation since many solar devices make use of polluting or toxic components, thus seriously hampering their eco-friendly nature. Herein, we review the literature, mainly published in the last few years, on the use of DESs in representative solar technologies, from solar plants to last generation photovoltaics, featuring not only their passive role as green solvents, but also their active behavior arising from their peculiar chemical nature. This collection highlights the increasing and valuable role played by DESs in solar technologies, in the fulfillment of green chemistry requirements and for performance enhancement, in particular in terms of long-term temporal stability.     

Monoaryl-Substituted Norbornadiene Photoswitches as Molecular Solar Thermal Energy Storage Compounds: Synthesis and Investigation

In the search for improved photochromic systems that may be used for the efficient reversible conversion of light into chemical energy, eight monoaryl-substituted norbornadienes are presented, which carry naphthyl, anthracenyl, or donor-acceptor-phenyl substituents to establish an extended π system. The substrates were synthesized by Suzuki-Miyaura coupling reactions, and their absorption properties, the key parameters of the photochromic equilibrium, and the energy storage density of the quadricyclane products were examined. It was observed that these compounds have favorable properties for chemical energy storage. Specifically, 2-(1-naphthyl)norbornadiene showed a pronounced red shift of the absorption, a long half-life (35 d) and a relatively high energy storage density (361 KJ/Kg) of the respective quadricyclane. Therefore, the so far neglected monoaryl-norbornadienes represent a useful and complementary class of compounds that should be considered in the development of efficient molecular solar thermal energy storage (MOST) compounds, which can reversibly convert sunlight into chemical energy.     

Spatiotemporal Utilization of Latent Heat in Erythritol-based Phase Change Materials as Solar Thermal Fuels

Solar thermal fuels (STFs) have been particularly concerned as sustainable future energy due to their impressive ability to store solar energy in chemical bonds and controllably release thermal energy. However, currently studied STFs mainly focus on molecule-based materials with high photochemical activity, toxicity, and compromised features, which greatly restricts their applications in practical scenarios of solar energy utilization. Herein, we present a novel erythritol-based composite phase change material (PCM) as a new type of STFs with an outstanding capability to store solar energy as latent heat in its stable supercooling state and release thermal energy as needed. This composite PCM with stored thermal energy can be maintained stably at room temperature and subsequently release latent heat as high as 224.9 J/g during the crystallization process triggered by thermal stimuli. Remarkably, solar energy can be converted into latent heat stored in the composite PCM over months. Through mechanical stimulations, the released latent heat can increase the temperature of the composite up to 91 °C. This work presents a new concept of using spatiotemporal storage and release of latent heat in PCMs for solar energy utilization, making it a potential candidate as STFs for developing future clean energy techniques.     

Glycerol and Glycerol-Based Deep Eutectic Mixtures as Emerging Green Solvents for Polyphenol Extraction: The Evidence So Far

The acknowledgement that uncontrolled and excessive use of fossil resources has become a prime concern with regard to environmental deterioration, has shifted the orientation of economies towards the implementation of sustainable routes of production, through the valorization of biomass. Green chemistry plays a key role in this regard, defining the framework of processes that encompass eco-friendly methodologies, which aim at the development of highly efficient production of numerous bioderived chemicals, with minimum environmental aggravation. One of the major concerns of the chemical industry in establishing sustainable routes of production, is the replacement of fossil-derived, volatile solvents, with bio-based benign ones, with low vapor pressure, recyclability, low or no toxicity, availability and low cost. Glycerol is a natural substance, inexpensive and non-toxic, and it is a principal by-product of biodiesel industry resulting from the transesterification process. The ever-growing market of biodiesel has created a significant surplus of glycerol production, resulting in a concomitant drop of its price. Thus, glycerol has become a highly available, low-cost liquid, and over the past decade its use as an alternative solvent has been gaining unprecedented attention. This review summarizes the utilization of glycerol and glycerol-based deep eutectic mixtures as emerging solvents with outstanding prospect in bioactive polyphenol extraction.     

Introducing Deep Eutectic Solvents to Polar Organometallic Chemistry: Chemoselective Addition of Organolithium and Grignard Reagents to Ketones in Air

Despite their enormous synthetic relevance, the use of polar organolithium and Grignard reagents is greatly limited by their requirements of low temperatures in order to control their reactivity as well as the need of dry organic solvents and inert atmosphere protocols to avoid their fast decomposition. Breaking new ground on the applications of these commodity organometallics in synthesis under more environmentally friendly conditions, this work introduces deep eutetic solvents (DESs) as a green alternative media to carry out chemoselective additions of ketones in air at room temperature. Comparing their reactivities in DES with those observed in pure water suggest that a kinetic activation of the alkylating reagents is taking place, favoring nucleophilic addition over the competitive hydrolysis, which can be rationalized through formation of halide‐rich magnesiate or lithiate species.     

Triglycerides as Novel Phase-Change Materials: A Review and Assessment of Their Thermal Properties

Latent Heat Storage (LHS) with Phase-Change Materials (PCMs) represents a high energy density storage technology which could be applied in a variety of applications such as waste heat recovery and integration of renewable energy technologies in energy systems. To increase the sustainability of these storage solutions, PCMs have to be developed with particular regard to bio-origin and biodegradability. Triglycerides represent an interesting class of esters as the main constituents of animal and vegetable fats, with attractive thermal properties. In order to be used as PCMs, the thermal behaviour of triglycerides has to be fully understood, as in some cases they have been reported to show polymorphism and supercooling. This study assesses the suitability of triglycerides as PCMs by reviewing the literature published so far on their behaviour and properties. In particular, melting points, enthalpies of fusion, polymorphism, thermal conductivities, heat capacities and thermal cycling stabilities are considered, with a focus on LHS and thermal energy storage applications. In addition, the efforts conducted regarding modelling and the prediction of melting points and enthalpies based on chemical structures are summarized and assessed.     

Dyes and Redox Couples with Matched Energy Levels: Elimination of the Dye‐Regeneration Energy Loss in Dye‐Sensitized Solar Cells

In dye‐sensitized solar cells (DSSCs), a significant dye‐regeneration force (ΔG_reg⁰≥0.5 eV) is usually required for effective dye regeneration, which results in a major energy loss and limits the energy‐conversion efficiency of state‐of‐art DSSCs. We demonstrate that when dye molecules and redox couples that possess similar conjugated ligands are used, efficient dye regeneration occurs with zero or close‐to‐zero driving force. By using Ru(dcbpy)(bpy)₂²⁺ as the dye and Ru(bpy)₂(MeIm)₂^3+//2+ as the redox couple, a short‐circuit current (J_sc) of 4 mA cm^?2 and an open‐circuit voltage (V_oc) of 0.9 V were obtained with a ΔG_reg⁰ of 0.07 eV. The same was observed for the N3 dye and Ru(bpy)₂(SCN)₂^1+/0 (ΔG_reg⁰=0.0 eV), which produced an J_sc of 2.5 mA cm^?2 and V_oc of 0.6 V. Charge recombination occurs at pinholes, limiting the performance of the cells. This proof‐of‐concept study demonstrates that high V_oc values can be attained by significantly curtailing the dye‐regeneration force.     

Thermal Energy Storage and Heat Transfer of Nano-Enhanced Phase Change Material (NePCM) in a Shell and Tube Thermal Energy Storage (TES) Unit with a Partial Layer of Eccentric Copper Foam

Thermal energy storage units conventionally have the drawback of slow charging response. Thus, heat transfer enhancement techniques are required to reduce charging time. Using nanoadditives is a promising approach to enhance the heat transfer and energy storage response time of materials that store heat by undergoing a reversible phase change, so-called phase change materials. In the present study, a combination of such materials enhanced with the addition of nanometer-scale graphene oxide particles (called nano-enhanced phase change materials) and a layer of a copper foam is proposed to improve the thermal performance of a shell-and-tube latent heat thermal energy storage (LHTES) unit filled with capric acid. Both graphene oxide and copper nanoparticles were tested as the nanometer-scale additives. A geometrically nonuniform layer of copper foam was placed over the hot tube inside the unit. The metal foam layer can improve heat transfer with an increase of the composite thermal conductivity. However, it suppressed the natural convection flows and could reduce heat transfer in the molten regions. Thus, a metal foam layer with a nonuniform shape can maximize thermal conductivity in conduction-dominant regions and minimize its adverse impacts on natural convection flows. The heat transfer was modeled using partial differential equations for conservations of momentum and heat. The finite element method was used to solve the partial differential equations. A backward differential formula was used to control the accuracy and convergence of the solution automatically. Mesh adaptation was applied to increase the mesh resolution at the interface between phases and improve the quality and stability of the solution. The impact of the eccentricity and porosity of the metal foam layer and the volume fraction of nanoparticles on the energy storage and the thermal performance of the LHTES unit was addressed. The layer of the metal foam notably improves the response time of the LHTES unit, and a 10% eccentricity of the porous layer toward the bottom improved the response time of the LHTES unit by 50%. The presence of nanoadditives could reduce the response time (melting time) of the LHTES unit by 12%, and copper nanoparticles were slightly better than graphene oxide particles in terms of heat transfer enhancement. The design parameters of the eccentricity, porosity, and volume fraction of nanoparticles had minimal impact on the thermal energy storage capacity of the LHTES unit, while their impact on the melting time (response time) was significant. Thus, a combination of the enhancement method could practically reduce the thermal charging time of an LHTES unit without a significant increase in its size.     

Characterization of Unripe and Mature Avocado Seed Oil in Different Proportions as Phase Change Materials and Simulation of Their Cooling Storage

Environmental problems have been associated with energy consumption and waste management. A solution is the development of renewable materials such as organic phase change materials. Characterization of new materials allows knowing their applications and simulations provide an idea of how they can developed. Consequently, this research is focused on the thermal and chemical characterization of five different avocado seed oils depending on the maturity stage of the seed: 100% unripe, 25% mature-75% unripe, 50% mature-50% unripe, 75% mature-25% unripe, and 100% mature. The characterization was performed by differential scanning calorimetry, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The best oil for natural environments corresponded to 100% matured seed with an enthalpy of fusion of 52.93 J·g−1, and a degradation temperature between 241–545 °C. In addition, the FTIR analysis shows that unripe seed oil seems to contain more lipids than a mature one. Furthermore, a simulation with an isothermal box was conducted with the characterized oil with an initial temperature of −14 °C for the isothermal box, −27 °C for the PCM box, and an ambient temperature of 25 °C. The results show that without the PCM the temperature can reach −8 °C and with it is −12 °C after 7 h, proving its application as a cold thermal energy system.