Efficient and fast Heck vinylation of 2-bromo-6-methyl pyridines with methylacrylate. Application to the synthesis of 6-methyl cyclopenta[b]pyridinone

Heck vinylation of 2-bromo-6-methyl-3-substituted pyridines using η³-allylpalladium chloride dimer/P(o-Tol)₃ complex/toluene and dimethylacetamide (DMA) as co-solvent with methyl acrylate is reported. Electronic and steric effects were investigated engaging diversely 2-bromo-3,6-disubstituted pyridines. As application, a new synthesis of the 6-methyl cyclopenta[b]pyridinone building-block connecting Heck vinylation, alkene reduction and Dieckmann condensation is described.     

Vinylation and polymerization with trivinylaluminum. I. Vinylation of organic halides as a model for termination in cationic polymerization leading to vinyl end groups

An improved synthesis of trivinylaluminum (V₃Al) is described. The proton magnetic resonance (PMR) spectrum of V₃Al was recorded and analyzed. A new vinylation method involving the use of V₃Al as the vinylating agent has been developed, and the vinylation of organic halides by V₃Al was studied at ?30, ?50 and ?70°C. Primary alkyl chlorides, such as methyl and methylene chloride, do not react with V₃Al and were used as solvents. Secondary chlorides such as 2-chloropropane also do not react. t-Butyl chloride gives rise to t-butylethylene (70–98%), depending on reaction conditions, and the allylic chlorides, 3-chloro-1-butene, and 3-chloro-3-methyl-1-butene, yield the expected vinylated products and their isomers (～90%). Allyl and benzyl chloride do not react under the conditions tried. The reaction between V₃Al and the ditertiary dichloride 2,6-dichloro-2,6-dimethylheptane yields several isomeric C₁₃H₂₄ and C₁₁H₂₀ hydrocarbons; however, surprisingly, C₉H₁₆ does not form. The C₁₃ hydrocarbons arise by divinylation at the termini of the dichloride, while the C₁₁ hydrocarbons are formed by vinylation at one and proton elimination at the other terminus of the dichloride. The presence of unsaturated C₁₃H₂₄ and C₁₁H₂₀ isomers is most likely due to proton induced isomerization. These results are explained by a proximity effect involving vinylation at one end of the dichloride by V₃Al followed by rapid reaction of the second chlorine (mostly) by V₂AlCl generated in situ during the first vinylation in the proximity of the chloride. At the other chlorine terminus V₂AlCl causes either a second vinylation (leading to C₁₃ hydrocarbons) or a proton elimination (leading to C₁₁ hydrocarbons). The absence of C₉H₁₆ among the reaction products indicates that V₃Al exclusively effects vinylation. The RCl + V₃Al ← RV + V₂AlCl reaction may be regarded as a model for initiation followed by immediate termination in cationic olefin polymerization, a process leading to vinyl-ended polymers.     

Regioselective C-H functionalization directed by a removable carboxyl group: palladium-catalyzed vinylation at the unusual position of indole and related heteroaromatic rings

The palladium-catalyzed oxidative vinylation of indole-3-carboxylic acids with alkenes effectively proceeds via directed C-H functionalization and decarboxylation to produce the corresponding 2-vinylated indoles. Similarly, pyrrole-, furan-, and thiophenecarboxylic acids also undergo decarboxylative vinylation.     

Carbonyl addition reaction by means of β-silylphosphorous ylide. -diastereoselective vinylation of α-alkoxy aldehydes.

β-Silylphosphorous ylide reacts with α-alkoxy aldehydes to give exclusively vinylation product , with high -diastereoselectivity.     

Ruthenium-catalyzed oxidative vinylation of heteroarene carboxylic acids with alkenes via regioselective C-H bond cleavage

The ruthenium-catalyzed oxidative vinylation of thiophene-2-carboxylic acids with alkenes efficiently proceeds through directed C-H bond cleavage to give the corresponding 3-vinylated products. Similarly, benzothiophene-, benzofuran-, pyrrole-, and indolecarboxylic acids also undergo regioselective vinylation.     

Mechanistic dichotomy in the solvent dependent access to E vs. Z-allylic amines via decarboxylative vinylation of amino acids

The solvent plays an important role in the photophysical properties of donor–acceptor based photocatalysts. The solvent-dependent access to E vs. Z-allylic amines was achieved via decarboxylative vinylation of amino acids with vinyl sulfones. Detailed experimental studies have been conducted to understand the role of the solvent in the reactivity and stereoselectivity of the vinylation reactions.

A solvent-dependent access to E vs. Z-allylic amines was achieved via decarboxylative vinylation of amino acids. Detailed experimental studies have been conducted to understand the role of the solvent in the reactivity and stereoselectivity of the vinylation reactions.     

Sequential C–O decarboxylative vinylation/C–H arylation of cyclic oxalates via a nickel-catalyzed multicomponent radical cascade

A selective, sequential C–O decarboxylative vinylation/C–H arylation of cyclic alcohol derivatives enabled by visible-light photoredox/nickel dual catalysis is described. This protocol utilizes a multicomponent radical cascade process, i.e. decarboxylative vinylation/1,5-HAT/aryl cross-coupling, to achieve efficient, site-selective dual-functionalization of saturated cyclic hydrocarbons in one single operation. This synergistic protocol provides straightforward access to sp³-enriched scaffolds and an alternative retrosynthetic disconnection to diversely functionalized saturated ring systems from the simple starting materials.

A selective, sequential C–O decarboxylative vinylation/C–H arylation of cyclic alcohol derivatives enabled by visible-light photoredox/nickel dual catalysis has been described.     

Nickel-catalyzed enantioselective vinylation of aryl 2-azaallyl anions

A unique enantioselective nickel-catalyzed vinylation of 2-azaallyl anions is advanced for the first time. This method affords diverse vinyl aryl methyl amines with high enantioselectivities, which are frequently occurring scaffolds in natural products and medications. This C–H functionalization method can also be extended to the synthesis of enantioenriched 1,3-diamine derivatives by employing suitably elaborated vinyl bromides. Key to the success of this process is the identification of a Ni/chiraphos catalyst system and a less reducing 2-azaallyl anion, all of which favor an anionic vinylation route over a background radical reaction. A telescoped gram scale synthesis and a product derivatization study confirmed the scalability and synthetic potential of this method.

A unique enantioselective Ni-catalyzed vinylation of 2-azaallyl anions is advanced. This method affords vinyl aryl methyl amine or 1,3-diamine derivatives with high enantioselectivities, which are frequently occurring scaffolds in medications.     

An approach to isoindole skeleton via ortho palladation

An acid-induced cyclisation of the products of vinylation of ortho palladated NN-dimethylbenzylamines by 3-buten-2-one (II) leads to isoindolinium derivatives (IV) as confirmed by an X-ray structural study.     

Formation of free radicals in the vinylation of 2-substituted pyrroles with acetylenes in a KOH-DMSO system

By spin trapping, using 2-methyl-2-nitrosopropane (t-BuNO), the EPR signals of vinyl-tert-butylnitroxyls and spin adducts of t-BuNO with products of the addition of 2-substituted pyrrole radicals to acetylenes were recorded during the vinylation of 2-substituted pyrroles with acetylenes in a KOH-DMSO system. The 2-substituted pyrrole radicals have a high stability, and their EPR spectra were observed directly in the vinylation reactions. It is shown that one-electron transfer processes are involved in vinylation.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1056–1062, August, 1992.     

Stereoselective synthesis of N-benzyl conduramine F-1, N-benzyl ent-conduramine E-1, dihydroconduramine F-1 and ent-dihydroconduramine E-1

A short and stereoselective synthesis of conduramine F-1 and ent-conduramine E-1 derivatives have been achieved starting from d-mannitol using nucleophilic vinylation on imine. A concise sequence of vinylation at both ends of d-mannitol and followed by RCM allowed us to prepare target compound.     

Reactions of benzothiazole-2-thione and benzothiazole-2-one with acetylene

Reaction of benzothiazole-2-thione and benzothiazole-2-one with acetylene in the presence of potassium hydroxide or cadmium acetate gives 2-vinylthiobenzothiazole and 3-vinylbenzothiazol-2-one, respectively. Benzothiazole-2-thione is partially convened to benzothiazol-2-one by the action of Cd(OAc)₂. Under vinylation conditions the latter also forms 2-vinylthioaniline.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 270–271, February, 1991.     

Optimized Synthesis of Vinyl Ether Sugars and Vinyl Glycosides through Transfer Vinylation Catalyzed by (4,7‐Ph2‐phen)Pd(OOCCF3)2

Sugar vinyl ethers and vinyl glycosides are conveniently synthesized by catalytic transfer vinylation with butyl vinyl ether, which serves as both the solvent and source of vinyl. The air‐stable catalyst (4,7‐diphenyl‐1,10‐phenanthroline)Pd(OOCCF₃)₂ is prepared in situ from commercially available components.     

Copper-catalyzed transformation of carbonyl-ene-nitrile compounds: Vinylation,imino ene reaction,and alkynylation of 2-aza-2,4-cyclopentadienone intermediates generated via Ritter-type hydration and dehydrative cyclization reactions

1H-pyrrolin-2(5H)-one derivatives are easily obtained from carbonyl-ene-nitrile compounds and alkenes or alkynes by copper(II)-catalyzed tandem sequence involving vinylation or allylation as well as Ritter-type hydration and dehydrative cyclization.     

Highly effective stereoselective synthesis of vinyl ethers of 5-alkyl-2-(2-furyl)-5-hydroxymethyl-1,3-dioxanes

The vinylation of cis-5-alkyl-5-hydroxymethyl-2-(2-furyl)-1,3-dioxanes in the KOH–DMSO system in acetylene at atmospheric or elevated pressures (85-100°C, 3 h) takes place stereoselectively and leads to the formation of cis-5-alkyl-2-(2-furyl)-5-vinyloxymethyl-1,3-dioxanes with yields of up to 93%.     

Synthesis of 4-Vinylmorpholine Based on Acetylene

It has been shown that from the possible methods for the synthesis of 4-vinylmorpholine, the vinylation of morpholine with acetylene remains acceptable. A technologically accessible method for vinylation of morpholine with acetylene at atmospheric pressure was developed.

     

Heck vinylation of aryl iodides by a silica sol-gel entrapped Pd(II) catalyst and its combination with a photocyclization process

[reaction: see text] Silica sol-gel encaged PdCl(2)(PPh(3))(2) is a recyclable catalyst for the Heck vinylation of aryl iodides. It is possible to couple the Heck reaction with photocyclization in a one-pot process.     

Iridium-catalyzed allylic vinylation and asymmetric allylic amination reactions with o-aminostyrenes

An Ir-catalyzed allylic vinylation reaction of allyl carbonates with o-aminostyrene derivatives has been realized, providing skipped (Z,E)-diene derivatives. With (E)-but-2-ene-1,4-diyl dimethyl dicarbonate as the substrate, an efficient enantioselective synthesis of 1-benzazepine derivatives via an Ir-catalyzed domino allylic vinylation/intramolecular allylic amination reaction has been developed. Mechanistic studies of the allylic vinylation reaction have been carried out, and the results suggest that the leaving group of the allylic precursor plays a key role in directing the reaction pathway. Screening of various allylic precursors showed that Ir-catalyzed reactions of allyl diethyl phosphates with o-aminostyrene derivatives proceed via an allylic amination pathway. A subsequent ring-closing metathesis (RCM) reaction of the amination products led to a series of enantiomerically enriched 1,2-dihydroquinoline derivatives. Their utility is indicated by an asymmetric total synthesis of (-)-angustureine.     

Reaction of indazole and alkylpyrazoles with acetylene

The reaction of indazole and pyrazole and its alkyl-substituted derivatives with acetylene was studied. It was established that indazole and 3(5)-methylpyrazole form a mixture of vinyl isomers corresponding to their tautomeric forms under vinylation conditions. The ratios of the isomers of vinylindazoles in the reaction mixtures depend on the nature of the catalyst. The indazole isomers were separated by gas-liquid chromatography, and the 3(5)-methylpyrazole isomers were separated by vacuum fractionation. 1-Di(1-pyrazolyl)ethanes, the structure of which was confirmed by their PMR spectra, are also formed in the vinylation of pyrazoles.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1247–1251, September, 1976.     

Access to the synthesis of wybutosine,the first tricyclic fluorescent nucleoside isolated from phenyllalanine transfer ribonucleic acids

An improved synthesis of the key intermediate 5 for the chiral syntheses of wybutine (1c) and hydroxywybutine (1d) has been achieved by palladium-catalyzed vinylation, which has been utilized for the first synthesis of 3-β-D-ribofuranosylwybutine (2c).