Molded separation media: An inexpensive,efficient, and versatile alternative to packed columns for the fast HPLC separation of peptides,proteins, and synthetic oligomers and polymers

A simple molding process carried out within the confines of a chromatographic column has been used for the preparation of macroporous poly(glycidyl methacrylate-co-ethylene dimethacrylate) and poly(styrene-co-divinylbenzene) rods. The novel monolithic separation media that are obtained are useful for the HPLC separation of biological and synthetic polymers. The presence of large pores with a diameter of about 1 μm makes the molded rod columns easily permeable to eluents. Therefore, the back pressure of these columns is modest even at high flow rates. In contrast to the conventional HPLC columns packed with beads, all of the mobile phase flows through the continuous monolithic medium. As a result of this total convection, the efficiency of the molded media is almost independent of the flow rate. This improves significantly the separation ability of the rod columns and very fast separations of macromolecules such as peptides, proteins, and synthetic polymers have been demonstrated.     

A new affinity-HPLC packing for protein separation: Cibacron blue attached uniform porous poly(HEMA-<Emphasis Type="Italic">co</Emphasis>-EDM) beads

In this study, a new affinity high-performance liquid chromatography (HPLC) stationary phase suitable for protein separation was synthesized. In the first stage of the synthesis, uniform porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate), poly(HEMA-co-EDM), beads 6.2 μm in size were obtained. Homogeneous distribution of hydroxyl groups in the bead interior was confirmed by confocal laser scanning microscopy. The plain poly(HEMA-co-EDM) particles gave very low non-specific protein adsorption with albumin. The selected dye ligand Cibacron blue F3G-A (CB F3G-A) was covalently linked onto the beads via hydroxyl groups. In the batch experiments, albumin adsorption up to 60 mg BSA/g particles was obtained with the CB F3G-A carrying poly(HEMA-co-EDM) beads. The affinity-HPLC of selected proteins (albumin and lysozyme) was investigated in a 25 mm×4.0-mm inner diameter column packed with CB F3G-A carrying beads and both proteins were successfully resolved. By a single injection, 200 μg of protein was loaded and quantitatively eluted from the column. The protein recovery increased with increasing flow rate and salt concentration of the elution buffer and decreased with the increasing protein feed concentration. During the albumin elution, theoretical plate numbers up to 30,000 plates/m were achieved by increasing the salt concentration.     

Multidimensional system enabling deglycosylation of proteins using a capillary reactor with peptide-N-glycosidase F immobilized on a porous polymer monolith and hydrophilic interaction liquid chromatography–mass spectrometry of glycans

A reactor with immobilized peptide-N-glycosidase F on a monolithic polymer support in a capillary has been developed that allows fast and efficient release of N-linked glycans from immunoglobulin G molecules. Two different monolithic scaffolds based on poly(glycidyl methacrylate-co-ethylene dimethacrylate) and poly(butyl methacrylate-co-ethylene dimethacrylate) were prepared. A multistep photografting process was used to reduce non-specific adsorption of proteins and to obtain support containing reactive azlactone functionalities enabling the preparation of highly active immobilized peptide-N-glycosidase F. Performance of these reactors was determined through glycan release from several glycoproteins including ribonuclease B, chicken albumin, and human immunoglobulin G and their detection by matrix-assisted laser desorption-ionization/time-of-flight mass spectrometry. The optimized reactor was integrated into a multidimensional system comprising on-line glycan release and their separation via hydrophilic interaction liquid chromatography followed by electrospray ionization/time-of-flight mass spectrometry detection. Using the optimized monolithic reactor with immobilized peptide-N-glycosidase F, human immunoglobulin G was deglycosylated at room temperature in 5.5 min to an extent similar to that achieved with soluble enzyme after 24 h at 37 °C.     

Preparation and characterization of monolithic column by grafting pH-responsive polymer

A novel modified monolithic column with pH-responsive polymer chains was prepared by grafting methacrylic acid onto the poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolith. The grafting polymerization was achieved in an in situ manner which was performed by pumping methacrylic acid directly through an acidic hydrolysis monolithic column using potassium peroxydisulfate initiated free-radical polymerization. The grafted monolithic column was demonstrated to be the pH-responsive to the pore structure and the chromatographic characterization. The permeability of the column and the retention factors of five benzene homologues decreased due to the conformational changes of the polymer chains when the pH of mobile phase increased from 4.5 to 7.5. Furthermore, the modified monolithic column was used as the pH-responsive stationary phase and exhibited an excellent separation of four basic proteins.     

Preparation of Metal-Immobilized Methacrylate-Based Monolithic Columns for Flow-Through Cross-Coupling Reactions

With the aim of developing efficient flow-through microreactors for high-throughput organic synthesis, in this work, microreactors were fabricated by chemically immobilizing palladium-, nickel-, iron-, and copper-based catalysts onto ligand-modified poly(glycidyl methacrylate-co-ethylene dimethacrylate) [poly(GMA-co-EDMA)] monoliths, which were prepared inside a silicosteel tubing (10 cm long with an inner diameter of 1.0 mm) and modified with several ligands including 5-amino-1,10-phenanthroline (APHEN), iminodiacetic acid (IDA), and iminodimethyl phosphonic acid (IDP). The performance of the resulting microreactors in Suzuki−Miyaura cross-coupling reactions was evaluated, finding that the poly(GMA-co-EDMA) monolith chemically modified with 5-amino-1,10-phenanthroline as a binding site for the palladium catalyst provided an excellent flow-through performance, enabling highly efficient and rapid reactions with high product yields. Moreover, this monolithic microreactor maintained its good activity and efficiency during prolonged use.     

Preparation of thermo-responsive polymer brushes on hydrophilic polymeric beads by surface-initiated atom transfer radical polymerization for a highly resolutive separation of peptides

Poly(N-isopropylacrylamide-co-N-tert-butylacrylamide) [P(IPAAm-co-tBAAm)] brushes were prepared on poly(hydroxy methacrylate) (PHMA) [hydrolyzed poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate)] beads having large pores by surface-initiated atom transfer radical polymerization (ATRP) and applied to the stationary phases of thermo-responsive chromatography. Optimized amount of copolymer brushes grafted PHMA beads were able to separate peptides and proteins with narrow peaks and a high resolution. The beads were found to have a specific surface area of 43.0 m²/g by nitrogen gas adsorption method. Copolymer brush of P(IPAAm-co-tBAAm) grafted PHMA beads improved the stationary phase of thermo-responsive chromatography for the all-aqueous separation of peptides and proteins.     

Novel β-cyclodextrin derivative functionalized polymethacrylate-based monolithic columns for enantioselective separation of ibuprofen and naproxen enantiomers in capillary electrochromatography

A novel enantioselective polymethacrylate-based monolithic column for capillary electrochromatography was prepared by ring-opening reaction of epoxy groups from poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolith with a novel β-cyclodextrin derivative bearing 4-dimethylamino-1,8-naphthalimide functionalities. Conditions for the ring-opening reaction with respect to different reaction parameters were thoroughly optimized to obtain high electroosmotic flow, separation efficiency and enantioselectivity for the analytes. The nonaqueous mobile phase composition regarding acetonitrile–methanol ratio and the concentration of electrolyte were examined to manipulate the hydrophobic inclusion and anion-exchange interaction between the analytes and chiral stationary phase. It was observed that in addition to β-cyclodextrin cavity, the electrostatic interaction exhibited pronounced influence on the enantioseparation of acidic analytes. Acidic enantiomers (ibuprofen and naproxen) could be separated with separation factor (α) values up to 1.08 and a maximum separation efficiency of 86 000 plates/m could be achieved.     

Iminodiacetic acid functionalised organopolymer monoliths: application to the separation of metal cations by capillary high-performance chelation ion chromatography

Lauryl methacrylate-co-ethylene dimethacrylate monoliths were polymerised within fused silica capillaries and subsequently photo-grafted with varying amounts of glycidyl methacrylate (GMA). The grafted monoliths were then further modified with iminodiacetic acid (IDA), resulting in a range of chelating ion-exchange monoliths of increasing capacity. The IDA functional groups were attached via ring opening of the epoxy group on the poly(GMA) structure. Increasing the amount of attached poly(GMA), via photo-grafting with increasing concentrations of GMA, from 15 to 35 %, resulted in a proportional and controlled increase in the complexation capacity of the chelating monoliths. Scanning capacitively coupled contactless conductivity detection (sC⁴D) was used to characterise and verify homogenous distribution of the chelating ligand along the length of the capillaries non-invasively. Chelation ion chromatographic separations of selected transition and heavy metals were carried out, with retention factor data proportional to the concentration of grafted poly(GMA). Average peak efficiencies of close to 5,000 N/m were achieved, with the isocratic separation of Na, Mg(II), Mn(II), Co(II), Cd(II) and Zn(II) possible on a 250-mm-long monolith. Multiple monolithic columns produced to the same recipes gave RSD data for retention factors of <15 % (averaged for several metal ions). The monolithic chelating ion-exchanger was applied to the separation of alkaline earth and transition metal ions spiked in natural and potable waters.     

Poly(glycidyl methacrylate‐co‐N‐methylolacrylamide‐co‐ethylene dimethacrylate) monolith coupled to high‐performance liquid chromatography for the determination of adenosine phosphates in royal jelly

A polymer monolith microextraction method coupled with high‐performance liquid chromatography was developed for the determination of adenosine triphosphate, adenosine diphosphate, and adenosine monophosphate. The monolithic column was synthesized inside fused‐silica capillaries using thermal initiation free‐radical polymerization with glycidyl methacrylate as the monomer, ethylene dimethacrylate as the cross‐linker, cyclohexanol, and 1‐dodecanol as the porogen. N‐Methylolacrylamide, an important hydrophilic monomer, was incorporated into the polymerization mixture to enhance the hydrophilicity of the poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) column. The obtained poly(glycidyl methacrylate‐co‐N‐methylolacrylamide‐co‐ethylene dimethacrylate) monolith was characterized by scanning electron microscopy, Fourier‐transform infrared spectra, and X‐ray photoelectron spectroscopy. Optimum conditions for the preconcentration and separation of the target adenosines were also investigated. Under the optimum conditions, we obtained acceptable linearities, low limits of detection, and good relative standard deviations. The developed polymer monolith microextraction with high‐performance liquid chromatography method exhibited a good performance with recovery values in the range of 76.9?104.7% when applied to the determination of the adenosines in five royal jelly samples.     

Ti (IV) attached‐phosphonic acid functionalized capillary monolith as a stationary phase for in‐syringe‐type fast and robust enrichment of phosphopeptides

In this study, poly(vinylphosphonic acid‐co‐ethylene dimethacrylate), poly(VPA‐co‐EDMA) capillary monolith was synthesized as a starting material for obtaining a stationary phase for microscale enrichment of phosphopeptides. The chelation of active phosphonate groups with Ti (IV) ions gave a macroporous monolithic column with a mean pore size of 5.4 μm. The phosphopeptides from different sources were enriched on Ti (IV)‐attached poly(VPA‐co‐EDMA) monolith using a syringe‐pump. The monolithic capillary columns exhibited highly sensitive/selective enrichment performance with phosphoprotein concentrations as low as 1.0 fmol/mL. Six different phosphopeptides were detected with high intensity by the treatment of β‐casein digest with the concentration of 1.0 fmol/mL, using Ti (IV)@poly(VPA‐co‐EDMA) monolith. Highly selective enrichment of phosphopeptides was also successfully carried out even at trace amounts, in a complex mixture of digested proteins (molar ratio of β‐casein to bovine serum albumin, 1:1500) and three phosphopeptides were successfully detected. Four highly intense signals of phosphopeptides in human serum were also observed with high signal‐to‐noise ratio and a clear background after enrichment with Ti (IV)@poly(VPA‐co‐EDMA) monolith. It was concluded that the capillary microextraction system enabled fast, efficient and robust enrichment of phosphopeptides from microscale complex samples. The whole enrichment process was completed within 20 min, which was shorter than in the previously reported studies.     

Separation of antidepressants by capillary electrophoresis with in-line solid-phase extraction using a novel monolithic adsorbent

The separation of three selective serotonin reuptake inhibitors (SSRIs) by capillary electrophoresis (CE) with fully integrated solid-phase extraction (SPE) is described. Polymeric monolithic SPE modules were prepared in situ within a fused silica capillary from either butyl methacrylate-co-ethylene dimethacrylate or 3-sulfopropyl methacrylate-co-butyl methacrylate-co-ethylene dimethacrylate. Using a 1 cm SPE module placed at the inlet of the capillary, a mixture of sertraline, fluoxetine and fluvoxamine was extracted from aqueous solution by applying a simple pressure rinse. Under pressure-driven conditions, efficient elution was possible from both SPE materials investigated using 50 mM phosphate buffer, pH 3.5 in acetonitrile (20/80, v/v). Two different strategies were investigated for the efficient elution and subsequent CE separation. Injection of an aqueous sample plug directly into the non-aqueous elution/separation buffer was found to be unsuitable with poor elution profiles observed in the electrodriven mode. Alternatively, a sample plug equivalent to several capillary volumes could be injected by pressure followed by filling the capillary with the non-aqueous elution/separation buffer from the outlet end using a combination of pressure and electrodriven flow. Using a neutral monolith, efficient elution/separation was not possible due to an unstable electroosmotic flow (EOF), however, by adding the ionisable monomer, 3-sulfopropyl methacrylate to the SPE module to increase and stabilise the EOF, it was possible to achieve efficient elution from the SPE module, followed by baseline separation by CE using a 200 mM acetate buffer, pH 3.5 in acetonitrile (10/90, v/v). With enrichment factors of over 500 achieved for each of the analytes this demonstrates the potential of in-line SPE-CE for the sensitive analysis of these drugs.     

Fabrication of molecularly imprinted resin via controlled polymerization applied in the enrichment of bisphenol A for plastic products

The addition of bisphenol A has been frequently used in industrial manufacturing because it imparts plastic products with characteristics such as transparency, durability, and excellent impact resistance. However, its widespread use raises concerns about potential leakage into the surrounding environment, which poses a significant risk to human health. In this study, molecularly imprinted polymers with specific recognition of bisphenol A were synthesized through surface-initiated atom transfer radical polymerization using poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) as the substrate, bisphenol A as the template molecule, 4-vinylpyridine as the monomer, and ethylene glycol dimethacrylate as the cross-linker. The bisphenol A adsorption capacity was experimentally investigated, and the kinetic analysis of the molecularly imprinted polymers produced an adsorption equilibrium time of 25 min, which is consistent with the pseudo-second-order kinetic model. The results of the static adsorption experiments exhibited consistency with the Langmuir adsorption model, revealing a maximum adsorption capacity of 387.2 μmol/g. The analysis of molecularly imprinted polymers-enriched actual samples using high-performance liquid chromatography demonstrated excellent selectivity for bisphenol A, with a linear range showing 93.4%–99.7% recovery and 1.1%–6.4% relative standard deviation, demonstrating its high potential for practical bisphenol A detection and enrichment applications.     

Development of erbium phosphate doped poly(glycidyl methacrylate/ethylene dimethacrylate) spin columns for selective enrichment of phosphopeptides

In this study, a novel method for the highly selective enrichment of phosphopeptides using erbium phosphate doped poly(glycidyl methacrylate/ethylene dimethacrylate) spin columns is presented. Erbium phosphate was synthesized by precipitation from boiling phosphoric acid and incubated overnight in erbium chloride solutions. The resulting powder was embedded in a monolithic poly(glycidyl methacrylate/ethylene dimethacrylate) polymer. The monolith was synthesized in a spin column by radical polymerization. Erbium phosphate demonstrated a high affinity and selectivity for phosphopeptides due to the strong interaction of trivalent erbium ions with the phosphate groups of phosphopeptides. The high selectivity and performance of the designed spin columns were demonstrated by successfully enriching phosphopeptides from tryptically digested protein mixtures containing the model phosphoproteins α‐ and β‐casein, bovine milk, and human saliva. By the implementation of several washing steps, unspecific components were removed and the enriched phosphopeptides were effectively eluted from the spin columns under alkaline conditions. The selective performance of the presented method was further demonstrated by the enrichment of two synthetic phosphopeptides, which were spiked in tryptically digested and dephosphorylated HeLa cell lysates at low ratios. Finally, the presented approach was compared to conventional phosphopeptide enrichment by titanium oxide and revealed higher recoveries for the erbium phosphate doped monoliths.     

Comparative evaluation of a one‐pot strategy for the preparation of β‐cyclodextrin‐functionalized monoliths: Effect of the degree of amino substitution of β‐cyclodextrin on the column performance

To further evaluate the feasibility and applicability of the one‐pot strategy in monolithic column preparation, two novel β‐cyclodextrin‐functionalized organic polymeric monoliths were prepared using two β‐cyclodextrin derivatives, i.e. mono(6‐amino‐6‐deoxy)‐β‐cyclodextrin and heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin. In this improved method, mono(6‐amino‐6‐deoxy)‐β‐cyclodextrin or heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin reacted with glycidyl methacrylate to generate the corresponding functional monomers and were subsequently copolymerized with ethylene dimethacrylate. The polymerization conditions for both monoliths were carefully optimized to obtain satisfactory column performance with respect to column efficiency, reproducibility, permeability, and stability. The obtained poly(glycidyl methacrylate‐mono(6‐amino‐6‐deoxy)‐β‐cyclodextrin‐co‐ethylene dimethacrylate) and poly(glycidyl methacrylate‐heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin‐co‐ethylene dimethacrylate) monoliths exhibited a uniform structure, good permeability, and mechanical stability as indicated by scanning electron microscopy and micro‐high‐performance liquid chromatography experimental results. Because of the probable existence of multi‐glycidyl methacrylate linking spacers on the poly(glycidyl methacrylate‐heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin‐co‐ethylene dimethacrylate) monolith, the effect of the ratio of glycidyl methacrylate/heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin was especially studied, and satisfactory reproducibility could still be achieved by strictly controlling the composition of the polymerization mixture. To investigate the effect of the degree of amino substitution of β‐cyclodextrin on column performance, a detailed comparison of the two monoliths was also carried out using series of analytes including small peptides and chiral acids. It was found that the β‐cyclodextrin‐functionalized monolith with mono‐glycidyl methacrylate linking spacers demonstrated better chiral separation performance than that with multi‐glycidyl methacrylate linking spacers.     

Polymer monolithic capillary column fabricated by using monodisperse iron oxide nanocrystal template to enhance the electrochromatographic separation of small molecules

Monodisperse iron oxide nanocrystals and organic solvents were utilized as coporogens in monolithic poly(glycidyl methacrylate‐co‐ethylene glycol dimethacrylate) capillary columns to afford stationary phases with enhanced electrochromatographic performance of small molecules. While the conventional monoliths using organic solvents only as a porogen exhibited poor resolution (Rs) <1.0 and low efficiency of 40 000–60 000 plates/m, addition of a small amount of nanocrystals to the polymerization mixture provided increased resolution (Rs > 3.0) and high efficiency ranged from 60 000 to 100 000 plates/m at the same linear velocity of 0.856 mm/s. It was considered that the mesopores introduced by the nanocrystals played an important role in the improvement of the monolith performance. This new strategy expanded the application range of the hydrophobic monoliths in the separation of polar alkaloids and narcotics. The successful applications demonstrated that the glycidyl methacrylate based monoliths prepared by using nanocrystal template are a good alternative for enhanced separation efficiency of small molecules.     

Preparation and performance analysis of monodisperse glycidyl methacrylate modified restricted access media-imprinted materials

Using monodisperse poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) as the matrix, and pefloxacin template molecules, a novel restricted-access medium molecularly imprinted polymers with Bovine serum albumin crosslinked on its surface was prepared through reversible addition–fragmentation chain-transfer polymerization. Then, the obtained material was employed in dispersive solid-phase extraction to analyze the fluoroquinolones in untreated egg samples by high-performance liquid chromatography–ultraviolet detection. Adsorption performance revealed a good binding amount (40.72 mg/g), fast binding kinetics (25 min), satisfactory selectivity, and good ability to eliminate matrix interference. The reusability experiments indicated the materials have good reusable performance after repetition. Under the optimized conditions, restricted access media-molecularly imprinted polymers-dispersive solid-phase extraction was combined with high-performance liquid chromatography–ultraviolet to enrich fluoroquinolones in untreated eggs, good limit of detection (1.31–3.15 μg/L) and high recovery (89.5–96.8%) were obtained. The results showed that the prepared restricted-access material is promising for the direct detection of antibiotics in complex samples.     

On the separation of small molecules by means of nano-liquid chromatography with methacrylate-based macroporous polymer monoliths

Macroporous monolithic poly(butyl methacrylate-co-ethylene dimethacrylate) stationary phases were synthesized in the confines of 100 μm I.D. fused-silica capillaries via a free radical copolymerization of mono and divinyl monomeric precursors in the presence of porogenic diluents. These columns were used in order to determine their suitability for the reversed-phase separation of small molecules in isocratic nano-LC mode. Carefully designed experiments at varying realized phase ratio by a terminated polymerization reaction, as well as content of organic modifier in the mobile phase, address the most significant parameters affecting the isocratic performance of these monoliths in the separation of small molecules. We show that the performance of methacrylate-based porous polymer monoliths is strongly affected by the retention factor of the analytes separated. A study of the porous and hydrodynamic properties reveals that the actual nature of the partition and adsorption of the small analyte molecules between mobile and stationary (solvated) polymer phases are most crucial for their performance. This is due to a significant gel porosity of the polymeric stationary phase. The gel porosity reflects stagnant mass transfer zones restricting their applicability in the separation of small molecules under conditions of strong retention.     

Immunoaffinity extraction of testosterone by antibody immobilized monolithic capillary with on-line laser-induced fluorescence detection

An immunoaffinity capillary column has been made with poly (2-vinyl-4, 4-dimethylazlactone-co-2-hydroxyethyl methacrylate-co-ethylene dimethacrylate) (VDA-co-HEMA-co-EDMA) monolith as a support for the immobilized antibody. The monolith is prepared by UV-initiated in situ polymerization, followed by immobilizing anti-testosterone polyclonal antibody through the rapid reaction with VDA. Fluorescence labeled testosterone at C₃ is designed as a tracer to estimate the extraction ability of this immunoaffinity column, and to optimize the immunoextraction process, such as washing, eluting, incubation and injection. The performance in a more realistic application is then demonstrated successfully for the rapid extraction of testosterone (T) by competitive immunoassay and on-line laser-induced fluorescence (LIF) detection. This immunoaffinity monolith is easily prepared, with high mechanical strength and low flow resistance. It is a satisfactory material as an immunoextractor to detect small molecular compounds specifically and rapidly with high sensitivity (sub ng/mL level).     

Preparation and evaluation of poly(alkyl methacrylate-co-methacrylic acid-co-ethylene dimethacrylate) monolithic columns for separating polar small molecules by capillary liquid chromatography

In this study, methacrylic acid (MAA) was incorporated with alkyl methacrylates to increase the hydrophilicity of the synthesized ethylene dimethacrylate-based (EDMA-based) monoliths for separating polar small molecules by capillary LC analysis. Different alkyl methacrylate–MAA ratios were investigated to prepare a series of 30% alkyl methacrylate–MAA–EDMA monoliths in fused-silica capillaries (250-μm i.d.). The porosity, permeability, and column efficiency of the synthesized MAA-incorporated monolithic columns were characterized. A mixture of phenol derivatives is employed to evaluate the applicability of using the prepared monolithic columns for separating small molecules. Fast separation of six phenol derivatives was achieved in 5 min with gradient elution using the selected poly(lauryl methacrylate-co-MAA-co-EDMA) monolithic column. In addition, the effect of acetonitrile content in mobile phase on retention factor and plate height as well as the plate height-flow velocity curves were also investigated to further examine the performance of the selected poly(lauryl methacrylate-co-MAA-co-EDMA) monolithic column. Moreover, the applicability of prepared polymer-based monolithic column for potential food safety applications was also demonstrated by analyzing five aflatoxins and three phenicol antibiotics using the selected poly(lauryl methacrylate-co-MAA-co-EDMA) monolithic column.     

A strategy for screening trypsin inhibitors from traditional Chinese medicine based on a monolithic capillary immobilized enzyme reactor coupled with offline liquid chromatography and mass spectrometry

A novel strategy was successfully developed for screening trypsin inhibitors in traditional Chinese medicines based on monolithic capillary immobilized enzyme reactors combined with liquid chromatography‐tandem mass spectrometry. Organic polymer based monolithic enzyme reactors were firstly prepared by covalently bonding trypsin to a poly(glycidyl methacrylate‐co‐poly (ethylene glycol) diacrylate) monolith by the ring‐opening reaction of epoxy groups. The activity and kinetic parameters of the obtained monolithic trypsin reactors were systematically evaluated using micro‐liquid chromatography. Fourier transform infrared spectroscopy and scanning electron microscopy were also used to characterize the monolithic trypsin reactors. The resulting functional and denatured monolithic trypsin reactors were applied as affinity solid‐phase extraction columns, and offline coupled with a liquid chromatography‐tandem mass spectrometry system to construct a binding affinity screening platform. Subsequently, the proposed platform was applied for screening trypsin binders in a Scutellaria baicalensis Georgi extract. Three compounds, namely scutellarin, baicalin, and wogonoside were identified, and their inhibitory activities were further confirmed via an in vitro enzymatic inhibition assay. Additionally, molecular docking was also performed to study the interactions between trypsin and these three compounds.