Determination of 5-aminosalicylic acid related impurities by micellar electrokinetic chromatography with an ion-pair reagent

A micellar electrokinetic chromatographic (MEKC) method was developed for the quantification of mesalazine or 5-aminosalicylic acid (5-ASA) and its major impurities 3-aminosalicylic acid, salicylic acid, sulfanilic acid and 4-aminophenol. The optimisation of the experimental conditions was carried out considering some important requirements: resolution, reproducibility, detection limits of 0.1% (m/m) or less, short total analysis time. Preliminary investigations employing sodium dodecyl sulfate (SDS) as surfactant did not lead to the necessary resolution of the studied compounds; the addition of tetrabutylammonium bromide (TBAB) to the SDS micellar system resulted in the complete separation of all the compounds. The effects on the separation by several parameters such as TBAB concentration, SDS concentration, background electrolyte pH and concentration, were evaluated. Using a fused-silica capillary (8.5 cm effective length) complete analysis was obtained in a very short time. Under the optimised final conditions [120 mM 3-(cyclohexylamino)-2-hydroxy-1-propanesulfonic acid buffer, pH 10.20, 65 mM SDS in the presence of 55 mM TBAB and 5% methanol] the method was validated for specificity, precision, linearity, limits of detection and quantitation, and robustness: the 5-ASA related impurities can be quantified at least at the 0.1% (m/m) level.     

Separation and determination of lignans from seeds of Schisandra species by micellar electrokinetic capillary chromatography using ionic liquid as modifier

In this paper, a micellar electrokinetic chromatographic (MEKC) method using ionic liquid as modifier for the quantification of the active components of lignans found in the medicinal herbs Schisandra species was developed for the first time. Preliminary investigations employing sodium dodecyl sulfate (SDS) as surfactant did not lead to the necessary resolution of the studied compounds, the addition of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF4) to the SDS micellar system resulted in the complete separation of all the compounds. The effects on the separation by several parameters such as BMIM-BF4 and SDS concentration, applied voltage, background electrolyte pH and concentration, were evaluated. Under the optimal conditions (5 mM borate-5 mM phosphate buffer in the presence of 20 mM SDS and 10 mM BMIM-BF4, pH 9.2, applied voltage 25 kV and detection at 254 nm), the method successfully applied to the determination of lignans in extracts of Schisandra chinensis (Turcz.) Baill. and Schisandra henryi C.B. Clarke in less than 13 min. The separation mechanism was also discussed.     

Separation of natural pyrethrum extracts using micellar electrokinetic chromatography

The separation of the six pyrethrin esters in a technical pyrethrum extract (Riedel-de-Ha?n, Cresent Chemical Co. Inc. Hauppauge, NY, USA) by micellar electrokinetic chromatography (MEKC) using both sodium dodecyl sulfate (SDS) and a polymerized surfactant as pseudo-stationary phases has been investigated and optimized. Parameters such as pH, SDS and polymerized sodium N-undecyl sulfate (poly-SUS) concentration, type and concentration of background electrolyte and organic modifier, as well as the acetonitrile/water ratio in the sample were studied to optimize the resolution, efficiency, and analysis time. An optimized separation of the six pyrethrin esters was achieved in 25 min with 25 mM Tris, buffered at pH 9, containing 30 mM SDS, 25% (v/v) acetonitrile, and an equal volume ratio of acetonitrile/water sample matrix at a voltage of 25 kV. The use of 0.5% (w/v) poly-SUS enhanced resolution of the pyrethrin esters and shortened the total analysis time from 25 to 20 min, compared to the SDS mediated separation. The optimized MEKC results are compared to the HPLC separation of these esters and show an improvement in efficiency and total analysis time.     

Methodology for predicting the separation of proteins by hydrophobic interaction chromatography and its application to a cell extract

Ligand-exchange micellar electrokinetic capillary chromatography was used for the chiral resolution of underivatized and dansyl amino acid enantiomers simultaneously. The separation was achieved by chiral copper(II)-L-valine complexes incorporated in micelles of sodium dodecyl sulfate (SDS). The enantioresolution was strongly affected by SDS and a concentration of 20 mM SDS was shown to be necessary for the separation. Other impacting factors were investigated including pH, the molar ratio of copper(II) to L-valine and the total concentration of complex. Using the proposed method, 11 different dansyl amino acids and two underivatized amino acids were separated successfully with a running electrolyte of 20 mM NH4OAc, 4 mM CuSO4, 8 mM L-valine and 20 mM SDS at pH 9.0 in less than 25 min. Experiments were also performed with other amino acid ligands in order to vary the stability and the sterical arrangement of the copper(II) complexes and the possible chiral recognition mechanism was also discussed briefly.     

Supramolecular complex induced by the binding of sodium dodecyl sulfate to PAMAM dendrimers

Isothermal titration calorimetry (ITC) and dynamic light scattering (DLS) were employed to study the spontaneous supramolecular complexation of amine terminated PAMAM dendrimer (G3[EDA] PAMAM-NH2) induced by the binding of an anionic surfactant, sodium dodecyl sulfate (SDS). At pHor=10, the electrostatic binding ceased because the deprotonated PAMAM dendrimer was uncharged, and hence the surfactant-induced supramolecular assembly could not be formed.     

Optimization of separation and migration behavior of chloropyridines in micellar electrokinetic chromatography

The separation and migration behavior of pyridine and eight chloropyridines, including three monochloropyridines, four dichloropyridines, and 2,3,5-trichloropyridine were investigated by micellar electrokinetic chromatography using either sodium dodecyl sulfate (SDS) as an anionic surfactant or SDS-Brij 35 mixed micelles. Various parameters such as buffer pH, SDS concentration, Brij 35 concentration and methanol content that affect the separation were optimized. Complete separation of these chloropyridines was optimally achieved with a phosphate buffer containing SDS (30 mM) and methanol (10%, v/v) at pH 7.0. The resolution and selectivity of analytes could be considerably affected by the addition of methanol and/or Brij 35 to the background electrolyte. The migration order of these chloropyridines depends primarily on their hydrophobicity. However, electrostatic interactions may also play a significant role in the determination of the migration order of the positional isomers of chloropyridines.     

Optimization of the separation of flavonoids by micellar electrokinetic capillary chromatography: Effect of organic solvents

Summary A group of flavonoids of special interest to wine quality were separated by micellar electrokinetic chromatography (MEKC) with diode array detection. Their separation was optimized as a function of the buffer concentration and pH, the concentration of sodium dodecyl sulfate (SDS) and the applied voltage. Selectivity and resolution of the solutes were increased by adding organic solvents to the separation buffer, the best results being obtained at lower concentrations. An optimized buffer with 5% methanol provided optimum separation with regard to efficiency, resolution and migration time. The optimized method was applied to the determination of these compounds in wine samples.     

Separation of alkamides from Echinacea purpurea extracts by cyclodextrin-modified micellar electrokinetic chromatography

Separation of nine important alkyl methylbutyl- and isobutylamides (known as alkamides) obtained from Echinacea purpurea extracts was investigated by using cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC). Hydrophobic alkamides interact strongly with the micelles from the most common surfactants used in MEKC and this lead to predominant partition of the analytes into the micellar phase, resulting in poor resolution. The addition of neutral CDs to the alkaline (10 mM phosphate buffer pH 8.0) micellar system of sodium dodecyl sulfate (SDS), sodium cholate (SC) and sodium deoxycholate (SDC) was found to improve the separation of the studied alkamides. Among the several combinations surfactant/CD, three different systems showed to be particularly effective: SDS/hydroxypropyl-beta-CD (110 mM/100 mM) and SC/heptakis (2, 3, 6-tri-O-methyl)-beta-CD (200 mM/40 mM) which provided a complete separation of the studied compounds, and SDC/heptakis (2, 6-di-O-methyl)-beta-CD. The importance of appropriate surfactant vs. CD concentration ratio as well as that of total concentration of both surfactant and CD was considered. The optimization of the separation was performed by focussing the need for a rapid separation of nine alkamides diagnostically useful to define the fingerprint of Echinacea species.     

Microchip separations of transition metal ions via LED absorbance detection of their PAR complexes

Micellar electrokinetic chromatography was utilized in the electrophoretic separation of seven transition metal ions, colorimetrically complexed by 4-(2-pyridylazo)resorcinol (PAR) on a glass capillary electrophoresis microchip. Detection of the PAR metal chelates was demonstrated using a green light emitting diode (540 nm) and a miniature photomultiplier tube. Parameters investigated included the effect of buffer type, pH and surfactant concentration (sodium dodecyl sulfate, SDS) on the separation efficiency. The optimally determined background electrolyte contained 10 mM ammonium phosphate buffer (pH 7.5), 1 mM PAR to prevent kinetic lability problems and 75 mM SDS for enhanced resolution. The separation of seven transition metal ions, Co2+, V3+, Ni2+, Cu2+, Fe2+, Mn2+ and Cd2+, was achievable in under 65 s, with the resolution of each metal ion in excess of 1.60. Detection limits obtained ranged from 400 ppb for Ni2+ to 1.2 ppm for Mn2+.     

Determination of synthesized alpha-vitamin E by micellar electrokinetic chromatography

We developed a micellar electrokinetic chromatography method (MEKC) for the direct determination of the content of synthesized alpha-vitamin E. It was found that under the optimum separation conditions 7 mM borate + 14 mM phosphate + 15 mM sodium dodecyl sulfate (SDS) + 10 mM sodium cholate (NaCh) + 8% acetonitrile (pH 9.2) with UV detection wavelength at 214 nm, 16 kV constant voltage, and 26 degrees C constant temperature, alpha-vitamin E and its isomers can be baseline separated and alpha-vitamin E was quantitatively analyzed. In addition, the sample recovery, the limit of detection and the repeatability of the method were investigated. The influence of various parameters on the separation such as SDS concentration, NaCh concentration, buffer pH and acetonitrile percentage were also discussed.     

Analysis of destruxins produced from Metarhizium anisopliae by capillary electrophoresis

Destruxins are insecticidal metabolites of a fungus, Metarhizium anisopliae. These metabolites are usually secreted into the culture medium during growth. The structure of destruxins is classified as being a cyclic hexadepsipeptide. More than 35 different destruxins have been characterized with a wide range of insecticidal activities. In this report, the destruxins are extracted by acetonitrile and crystallization by lyophilization. The final crystal is subjected for capillary electrophoresis analysis. Because destruxins are relatively hydrophobic compounds, micellar electrokinetic capillary chromatography is used in this series of experiments. The borate-based running buffer is optimized according to (1) boric acid concentration, (2) sodium dodecyl sulfate (SDS) concentration, (3) acetonitrile concentration, and (4) the pH of the running buffer. Optimization is based on resolution and running speed. The results indicate that 20 mM boric acid with 40 mM SDS plus 10% acetonitrile with pH 9.24 is the best set of conditions for both resolution and running speed.     

1-Butyl-3-methylimidazolium-based ionic liquids and an anionic surfactant: Excellent background electrolyte modifiers for the analysis of benzodiazepines through capillary electrophoresis

In this study, we found that adding 1-butyl-3-methylimidazolium-based ionic liquids (ILs) and sodium dodecyl sulfate (SDS) as modifiers in the background electrolyte (BGE) for capillary electrophoresis enhanced the separation of benzodiazepines. In particular, 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([BMIM][NTf₂]) was the best IL additive for the separation system because its anionic moiety interacted favorably with the benzodiazepines. We added SDS because of its known effect on the separation of hydrophobic analytes. We optimized the separation conditions in terms of the concentrations of the IL, SDS, and organic solvent, the pH, and the BGE's ionic strength. The optimal BGE, containing 170 mM [BMIM][NTf₂] and 10 mM SDS, provided baseline separation, high efficiency, and satisfactory peak shapes for the benzodiazepines. The separation mechanism was based on heteroassociation between the anionic moiety of the IL and the benzodiazepines, with SDS improving the resolution of the separation. The limits of detection for the seven analytes ranged from 2.74 to 4.42 μg/mL. We subjected a urine sample to off-line solid phase extraction (SPE) prior to the analysis of its benzodiazepine content. Our experimental results reveal that the combination of [BMIM][NTf₂] and SDS provides adequate separation efficiency for its application to CE analyses of benzodiazepines after SPE concentration.     

On-chip chiral and achiral separation of amphetamine and related compounds labeled with 4-fluoro-7-nitrobenzofurazane

Amphetamine and analogous compounds have been labeled with 4-fluoro-7-nitrobenzofurazane and analyzed on a microfabricated chip. Separation of norephedrine, ephedrine, cathinone, pseudoephedrine, methcathinone, amphetamine and methamphetamine is demonstrated using micellar electrokinetic capillary chromatography (MEKC) and laser-induced fluorescence (LIF) detection. Chiral separations of individual drugs were studied using neutral and negatively charged cyclodextrins (CDs) with and without the addition of an organic modifier and/or sodium dodecyl sulfate (SDS). The best results were obtained using a highly sulfated gamma-CD (HS-gamm-CD) in combination with a low concentration of SDS. To obtain complete separation of a mixture of (+/-)-norephedrine, (+/-)ephedrine, (+/-)-pseudoephedrine, (+/-)-methcathinone, (+/-)-amphetamine and (+/-)-methamphetamine it was necessary to add a small amount (1.5 mM) of SDS to the separation buffer. Optimized chiral separation was achieved within 7 min using an S-folded separation channel, a separation voltage of 8 kV and a buffer consisting of 50 mM phosphate (pH 7.35), 10 mM HS-gamma-CD and 1.5 mM SDS.     

Enantiomeric separation of a group of chiral dihydropyridines by electrokinetic chromatography

Electrokinetic chromatography (EKC) was employed to achieve the enantiomeric separation of a group of chiral 1,4-dihydropyridines (DHPs) with pharmacological activity. Micelles of bile salts alone or mixed with neutral cyclodextrins, micelles of sodium dodecyl sulfate (SDS) mixed with neutral cyclodextrins, and anionic cyclodextrin derivatives, i.e., carboxymethyl-gamma-cyclodextrin (CM-gamma-CD), carboxymethyl-beta-cyclodextrin (CM-beta-CD), and succinylated beta-cyclodextrin (Succ-beta-CD), were employed as pseudostationary phases. The enantiomeric separation ability of these chiral selectors with respect to DHPs was studied in different experimental conditions. CM-beta-CD was shown to be the best chiral selector to perform the enantiomeric separation of DHPs by EKC. Next, the influence of the CM-beta-CD concentration, the pH and nature of the buffer, the temperature, and the applied voltage on the enantiomeric resolution of DHPs was studied. The use of a 50 mM ammonium acetate buffer, pH 6.7, 25 mM in CM-beta-CD together with an applied voltage of 15 or 20 kV, and a temperature of 15 degrees C enabled the individual enantiomeric separation of twelve DHPs, each one into its two enantiomers, and their separation in multicomponent mixtures of up to six DHPs into all their enantiomers.     

Separation of Fluoroquinolones by MEKC Modified with Hydrophobic Ionic Liquid as a Modifier

The hydrophobic ionic liquid [BMIM]PF₆ (1-butyl-3-methylimidazolium hexafluorophosphate) can interact with sodium dodecyl sulfate (SDS) micelles in aqueous solution and modify their physicochemical properties to produce a unique separation efficiency in micellar electrokinetic chromatography (MEKC). An MEKC method was developed using [BMIM]PF₆ as a modifier for separating eight fluoroquinolone compounds (ciprofloxacin, enrofloxacin, gatifloxacin, ofloxacin, norfloxacin, enoxacin, pazufloxacin, and tosufloxacin). The effects of several parameters on the separation selectivity, e.g., pH, concentration of background electrolyte, concentration ratio and amount of [BMIM]PF₆ and SDS, were investigated. Under the optimal conditions of 10 mmol L⁻¹ sodium borate, pH 7.1, 1.7% (w/w) SDS, 1.5% (w/w) [BMIM]PF₆ with 18 kV as running voltage, the eight investigated quinolone compounds were baseline separated within 15 min. The selectivity of the developed method differed from that of the simple SDS micelles system containing no ionic liquid. The results suggest that hydrophobic ionic liquids should be promising modifiers in capillary electrophoresis, especially in MEKC analysis.

     

Analysis of insecticidal proteins from Bacillus thuringiensis and recombinant Escherichia coli by capillary electrokinetic chromatography

Bacillus thuringiensis and recombinant Escherichia coli proteinaceous protoxins were subject to proteolysis and analyzed by capillary electrokinetic chromatography. Three resulting toxins (65 kDa) were baseline-resolved within 22 min using a 10 mM borate, pH 11 separation buffer consisting of 25 mM sodium dodecyl sulfate (SDS) and 30 mM phytic acid. The toxins displayed differential interactions with the SDS and phytic acid phases to effect their separation. The ion-pairing interaction between the analyte and phytic acid was also useful in preventing adsorption to the capillary walls and thus enhanced separation resolution and efficiency. The use of electrokinetic chromatography allows achievement of the separation in a significantly shorter time than conventional high-performance liquid chromatography (HPLC) using a diethylaminoethyl (DEAE) weak-anion exchanger.     

Analysis of selected withanolides in plant extract by capillary electrochromatography and microemulsion electrokinetic chromatography

Microemulsion electrokinetic chromatography (MEEKC) coupled with a diode-array detector was developed for the simultaneous analysis of natural steroidal compounds, withanolides including withaferin A, withacnistin and iochromolide. Optimal resolution was obtained with a microemulsion consisting of 70 mM octane, 800 mM 1-butanol, 100 mM sodium dodecyl sulfate (SDS), and 10 mM phosphate-borate buffer (pH 7) using a fused-silica capillary at 25 kV and 40 degrees C. Since this technique is not compatible with mass spectrometry detection, a capillary electrochromatographic method was developed to separate the investigated withanolides. The effects of mobile phase composition and pH were systematically investigated. Complete separation was obtained with a capillary electrochromatography (CEC) Hypersil C18 bonded silica column (packed length, 25 cmx100 microm ID and 375 microm OD), packed with 3 microm particles. The mobile phase consisted of formic acid-ammonia, pH 8 / acetonitrile (40/60 v/v); the voltage was set at 25 kV and the temperature at 20 degrees C. Under these conditions, resolution of these closely related compounds, including the critical pair withacnistin and iochromolide, was achieved in less than 5 min. The separations by MEEKC and CEC were compared with that obtained by reversed-phase liquid chromatography and showed similar retention order, indicating the analogy of the retention mechanism of these techniques. To further improve specificity and sensitivity, the developed CEC method was interfaced with electrospray ionization mass spectrometry using a Teflon connection between the CEC column and a void fused-silica capillary. Finally, the described methods were applied to the qualitative analysis of withanolides in Iochroma gesnerioides plant extract.     

Separation of cold medicine ingredients by capillary electrophoresis

This study demonstrates the separation of cold medicine ingredients (e.g., phenylpropanolamine, dextromethorphan, chlorpheniramine maleate, and paracetamol) by capillary zone electrophoresis and micellar electrokinetic chromatography. Factors affecting their separations were the buffer pH and the concentrations of buffer, surfactant and organic modifiers. Optimum results were obtained with a 10 mM sodium dihydrogen-phosphate-sodium tetraborate buffer containing 50 mM sodium dodecyl sulfate (SDS) and 5% methanol (MeOH), pH 9.0. The carrier electrolyte gave a baseline separation of phenylpropanolamine, dextromethorphan, chlorpheniramine maleate, and paracetamol with a resolution of 1.2, and the total migration time was 11.38 min.     

Separation of serum bilirubin species by micellar electrokinetic chromatography with direct sample injection.

Four major bilirubin species in serum were separated by micellar electrokinetic chromatography with 25 mM sodium dodecyl sulfate (SDS) and 20 mM sodium tetraborate-boric acid buffer at pH 8.5. Due to the solubilization of the serum proteins by the SDS micelles, serum samples were injected directly into a 50 cm x 75 microns I.D. fused-silica capillary and complete separation of the four bilirubin species was accomplished within ca. 10 min without extensive sample pretreatment. Detection was performed by absorbance at 450 nm and average limit of detection was in the 6.0 microM concentration range. The usefulness of this method was demonstrated for the separation and detection of a number of bilirubin species present in pathological human serum samples.     

Determination of triazine compounds in ground water samples by micellar electrokinetic capillary chromatography

In this work, a capillary electrophoresis (CE) method for the determination of a group of eleven triazine compounds by micellar electrokinetic capillary chromatography (MEKC) with diode array detection was developed. The eleven herbicides studied were: desethylatrazin-2-hydroxy (DEA), simazine, prometon, atrazine, simetryn, ametryn, propazine, prometryn, trietazine, terbutylazine, and terbutryn The separation of these compounds was optimised as a function of buffer concentration and pH, concentration of sodium dodecyl sulphate (SDS) and voltage applied. To increase the selectivity of the separation and the resolution of the solutes, different organic solvents were tested as buffer additives, obtaining the best results when 1-propanol was used. The optimised buffer (24 mM of sodium borate, 18 mM of disodium hydrogen phosphate, 25 mM of SDS, pH 9.5, and 5% of 1-propanol) provides the best separation in terms of resolution and migration time. This method allowed the determination of these compounds at concentrations of 0.05 μg l⁻¹ in ground water samples pretreated using solid-phase extraction (SPE).