Controlling chiral organization of molecular rods on Au(111) by molecular design

Chiral self-assembled structures formed from organic molecules adsorbed on surfaces have been the subject of intense investigation in the recent decade, owing both to relevance in applications such as enantiospecific heterogeneous catalysis or chiral separation as well as to fundamental interest, for example, in relation to the origin of biomolecular homochirality. A central target is rational design of molecular building blocks allowing transfer of chirality from the molecular to the supramolecular level. We previously studied the surface self-assembly of a class of linear compounds based on an oligo(phenylene ethynylene) backbone, which were shown to form a characteristic windmill adsorption pattern on the Au(111) surface. However, since these prochiral compounds were intrinsically achiral, domains with oppositely oriented windmill motifs and related conformational surface enantiomers were always realized in equal proportion. Here we report on the enantioselective, high yield chemical synthesis of a structurally related but intrinsically chiral compound in which two peripheral tert-butyl substituents are replaced by sec-butyl groups, each containing an (S) chiral center. Using scanning tunneling microscopy under ultrahigh vacuum conditions, we characterize the adsorption structures formed from this compound on the Au(111) surface. The perturbation introduced by the modified molecular design is found to be sufficiently small so structures form that are closely analogous to those observed for the original tert-butyl substituted compound. However, as demonstrated from careful statistical analysis of high-resolution STM images, the introduction of the two chiral (S)-sec-butyl substituents leads to a strong preference for windmill motifs with one orientation, demonstrating control of the chiral organization of the molecular backbones through rational molecular design.     

Self-assembly of alkanols on Au(111) surfaces

Self-assembled monolayers (SAMs) of alkanols (1-C(N)H(2N+1)OH) with varying carbon-chain lengths (N = 10-30) have been systematically studied by means of scanning tunneling microscopy (STM) at the interfaces between alkanol solutions (or liquids) and Au(111) surfaces. The carbon skeletons were found to lie flat on the surfaces. This orientation is consistent with SAMs of alkanols on highly oriented pyrolytic graphite (HOPG) and MoS2 surfaces, and also with alkanes on reconstructed Au(111) surfaces. This result differs from a prior report, which claimed that 1-decanol molecules (N = 10) stood on their ends with the OH polar groups facing the gold substrate. Compared to alkanes, the replacement of one terminal CH3 group with an OH group introduces new bonding features for alkanols owing to the feasibility of forming hydrogen bonds. While SAMs of long-chain alkanols (N > 18) resemble those of alkanes, in which the aliphatic chains make a greater contribution, hydrogen bonding plays a more important role in the formation of SAMs of short-chain alkanols. Thus, in addition to the titled lamellar structure, a herringbone-like structure, seldom seen in SAMs of alkanes, is dominant in alkanol SAMs for values of N < 18. The odd-even effect present in alkane SAMs is also present in alkanol SAMs. Thus, the odd N alkanols (alkanols with an odd number of carbon atoms) adopt perpendicular lamellar structures owing to the favorable interactions of the CH3 terminal groups, similar to the result observed for odd alkanes. In contrast to alkanes on Au(111) surfaces, for which no SAMs on an unreconstructed gold substrate were observed, alkanols are capable of forming SAMs on either the reconstructed or the unreconstructed gold surfaces. Structural models for the packing of alkanol molecules on Au(111) surfaces have been proposed, which successfully explain these experimental observations.     

Self-assembly of normal alkanes on the Au (111) surfaces

The self-assembled monolayers (SAMs) of normal alkanes (n-C(n)H(2n+2)) with different carbon chain lengths (n=14-38) in the interfaces between alkane solutions (or liquids), and the reconstructed Au (111) surfaces have been systematically studied by means of scanning tunneling microscopy (STM). In contrast to previous studies, which concluded that some n-alkanes (n=18-26) can not form well-ordered structures on Au (111) surfaces, we observed SAM formations for all these n-alkanes without any exceptions. We find that gold reconstruction plays a critical role in the SAM formation. The alkane monolayers adopt a lamellar structure in which the alkane molecules are packed side-by-side, to form commensurate structures with respect to the reconstructed Au (111) surfaces. The carbon skeletons are found to lie flat on the surfaces, which is consistent with the infrared spectroscopic studies. Interestingly, we find that two-dimensional chiral lamellar structures form for alkanes with an even carbon number due to the specific packing of alkane molecules in a tilted lamella. Furthermore, we find that the orientation of alkane molecules deviates from the exact [011] direction, because of the intermolecular interactions among the terminal methyl groups of neighboring lamellae; this results in differences of molecular orientation between mirror structures of adjacent zigzag alkane lamellae. Structural models have been proposed, that shed new light on monolayer formation.     

Coverage-dependent formation of chiral ethylthiolate-Au complexes on Au(111)

We studied the coverage-dependent self-assembly of the flat-lying phase of ethylthiolate on Au(111). At low coverage, we observed the formation of short stripes of chiral Au-(SC(2)H(5))(2) complexes that arrange in a disordered phase. The latter grow partly at the expense of the native Au(111) surface reconstruction, which is fully lifted for a coverage of ～0.60 ML. We found that the lift of the reconstruction and evaporation from step edges are competing adatom sources. Close to saturation coverage (0.70 to 0.75 ML), large, well-ordered domains with a (8 × √3)rectangular superstructure formed. Alternation of chirality was found in adjacent stripes as already reported for other short alkanethiolates. We suggest that, because of a simple geometrical consideration, the chirality should, on the contrary, be preserved in the stripe phase of longer alkanethiolates.     

Self-assembly of insoluble porphyrins on Au(111) under aqueous electrochemical control

Self-assembled monolayers of a water-insoluble porphyrin, tetraphenyl porphyrin (TPP), in the presence of an aqueous electrolyte were characterized in situ with electrochemical scanning tunneling microscopy (EC-STM) at working electrode potentials of between 0.5 and -0.2 V. Isolated domains of TPP monolayers with differing orientation were observed on Au(111) in 0.1 M HClO(4) over this entire potential window. Individual TPP molecules could be resolved over a range of 700 mV, from open circuit potential (OCP) to near the hydrogen evolution potential. The unit cell is square, and the distance between neighboring molecules is about 1.4 ± 0.1 nm. High-resolution images allow the internal molecular structure to be discerned. No changes in the STM contrast of individual molecules were observed as the potential was changed. In a neutral electrolyte (0.1 M KClO(4), pH ~6), the potential range of stability of ordered structures is reduced. On HOPG, TPP forms ordered hexagonal structures with a lattice constant of about 2.6 nm in the double-layer potential region in 0.1 M HClO(4).     

Bimolecular networks and supramolecular traps on Au(111)

We demonstrate the formation of intermixed phases and self assembled molecular templates on the Au(111) surface. The templates are stabilized by hydrogen bonding between melamine molecules with trigonal symmetry and linear PTCDI (perylene tetra-carboxylic di-imide) molecules. When annealed, these molecules spontaneously form either a chiral intermixed phase or a honeycomb arrangement in which vertexes and edges correspond respectively to melamine and PTCDI molecules. We also observe minority phases with more complex intermolecular junctions. The use of these networks as templates is demonstrated by the controlled capture of fullerenes within the pores of the network to form dimers, hexamers, and heptamers. Our results confirm that bimolecular templates can be realized on a range of substrates.     

Self-assembly of phospholipid molecules at a Au(111) electrode surface

We described the first scanning tunneling microscopy study of spreading unilamellar vesicles of 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine (DMPC) at a Au(111) electrode surface. At the initial stage of the film formation, the molecular resolution images revealed that DMPC molecules are adsorbed flat with the acyl chains oriented parallel to the surface. The molecules assemble into double rows by aligning the acyl chains in the nearest neighbor direction of the reconstructed Au(111) surface and assuming a 90 +/- 10 degrees angle with respect to line of the molecular row. After approximately 30 min, this film is transformed into a hemimicellar state with long rows characteristic for the formation of hemicylindrical surface micelles. At hydrophilic surfaces such as glass, spreading of vesicles involves adsorption, rupture, and sliding of a single bilayer on a lubricating film of the solvent. We have provided the first evidence that a different mechanism is involved in spreading the vesicles at gold. The molecules released by rupture of vesicles self-assemble into an ordered film, and the assembly is controlled by the chain-substrate interaction.     

Tailoring the Self-assembly of Melamine on Au (111) via Doping with Cu Atoms

The doping effect of Cu on the self-assembly film of melamine on an Au(111) surface has been investigated with scanning tunneling microscopy (STM). The evaporated Cu adatoms occupy the positions underneath the amino groups and change the hydrogen bonding pattern between the melamine molecules. Accordingly, the self-assembly structure has changed stepwise from a well-defined honeycomb into a track-like and then a triangular structure depending on the amount of Cu adatoms. The interaction between Cu adatom and melamine is moderate thus the Cu adatoms can be released upon mild heating to around 100℃. These findings are different from previous observations of either the coordination assembly or the physically trapped metal adatoms.     

Self-assembly of chiral molecular polygons

Treatment of 2,2'-diacetyl-1,1'-binaphthyl-6,6'-bis(ethyne), L-H2, with 1 equiv of trans-Pt(PEt3)2Cl2 led to a mixture of different sizes of chiral metallocycles [trans-(PEt3)2Pt(L)]n (n = 3-8, 1-6). Each of the chiral molecular polygons 1-6 was purified by silica gel column chromatography and characterized by 1H, 13C{1H}, and 31P{1H} NMR spectroscopy, MS, IR, UV-vis, and circular dichroism spectroscopies, and microanalysis. The presence of tunable cavities (1.4-4.3 nm) and chiral functionalities in these molecular polygons promises to make them excellent receptors for a variety of guests.     

Hierarchical chiral framework based on a rigid adamantane tripod on Au(111)

We have investigated the tripod-shaped bromo adamantane trithiol (BATT) molecule on Au(111) using scanning tunneling microscopy (STM) at 4.7 K. Adsorption of BATT leads to formation of highly ordered self-assembled monolayers (SAMs) with three-point contacts on Au(111). The structure of these SAMs has been found to have a two-tiered hierarchical chiral organization. The self-assembly of achiral monomers produces chiral trimers, which then act as the building blocks for chiral hexagonal supermolecules. SAMs begin to form from the racemic mixture of assembled molecules in ribbon-shaped islands, followed by the transformation to enantiomeric domains when SAM layers develop two-dimensionally across hcp domains. Such a chiral phase transition at the two-dimensional domain can arise from a subtle balance between molecule-substrate and intermolecular interactions. Two structural factors, the S atom (stabilization) and the methylene groups (chirality) located just above the S atom, induce the chiral ordering of BATT on Au(111).     

Self-assembly of supramolecular chiral insulated molecular wire

Supramolecular chiral insulated molecular wire was constructed by self-assembly of a neutral one-dimensional schizophyllan host and a water-soluble polythiophene guest. The work presented here will not only open a door to a new application of polysaccharides but also provide an important clue to prepare stable supramolecular insulated molecular wires with one-handed helical structure.     

Two-dimensional pentacene:3,4,9,10-perylenetetracarboxylic dianhydride supramolecular chiral networks on Ag(111)

Self-assembly of the binary molecular system of pentacene and 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) on Ag(111) has been investigated by low-temperature scanning tunneling microscopy, molecular dynamics (MD), and density functional theory (DFT) calculations. Well-ordered two-dimensional (2D) pentacene:PTCDA supramolecular chiral networks are observed to form on Ag(111). The 2D chiral network formation is controlled by the strong interfacial interaction between adsorbed molecules and the underlying Ag(111), as revealed by MD and DFT calculations. The registry effect locks the adsorbed pentacene and PTCDA molecules into specific adsorption sites due to the corrugation of the potential energy surface. The 2D supramolecular networks are further constrained through the directional CO...H-C multiple intermolecular hydrogen bonding between the anhydride groups of PTCDA and the peripheral aromatic hydrogen atoms of the neighboring pentacene molecules.     

Self-assembly of monodispersed, chiral nanoclusters of cysteine on the Au(110)-(1 x 2) surface

The self-assembly of monodispersed supramolecular nanoclusters was observed by scanning tunneling microscopy (STM). The clusters form from the naturally occurring amino acid cysteine by vapor deposition onto the Au(110)-(1 x 2) surface under ultrahigh vacuum conditions. Enantiomerically pure l- and d-cysteine yields clusters with mirror-image STM signatures. Racemic ld-cysteine segregates into homochiral clusters, evidencing specific intermolecular interactions during the self-assembly process.     

Formation and healing of micrometer-sized channel networks on highly mobile Au(111) surfaces

Practical protocols are presented to reproducibly prepare micrometer-sized Au(111) substrates. Au(111) terraces of micrometer dimensions and atomic smoothness were crystallized by flame-annealing vacuum-deposited gold films on glass and on millimetric amorphous gold shots. Gold films and shots that were slowly cooled in a moderately applied stream of nitrogen gas exhibited large and stable crystal surfaces with Au(111) morphologies. Similarly, flame-annealed gold samples cooled with another protocol--in much rougher streams of nitrogen gas--produced morphologically unstable and highly mobile Au(111) layers. Within the first hour after preparation, however, rapid microscale restructuring in the layers produced complex morphologies of hexagonal channel networks and islands that were predominantly triangular. These channeled gold layers fused slowly in the following hours, with velocities of 0.01-0.2 A/s, as quantified by digital image correlation (DIC). Atomically smooth, stable, and predominantly triangular Au(111) terraces on the scale of micrometers were observed approximately 24 h after the sample preparations.     

Influence of molecular geometry on the adsorption orientation for oligophenylene-ethynylenes on Au(111)

The adsorption structures formed from a class of oligophenylene-ethynylenes on Au(111) under ultrahigh vacuum conditions is compared based on high-resolution scanning tunneling microscopy (STM) measurements. The molecules consist of three or four benzene rings connected by ethynylene spokes and are all functionalized identically with an aldehyde, a hydroxyl, and a bulky tert-butyl group. Compounds with the conjugated spokes placed in the para, meta, and threefold configurations were previously found to exclusively form molecular layers with flat-lying adsorption geometries. In contrast, the associated compound with spokes in the ortho configuration surprisingly differs in its adsorption by forming only structures with an upright adsorption orientation. The packing density for the structures formed by the compound with the ortho configuration is less dense than that in conventional self-assembled monolayers while still keeping the conducting backbone in an upright orientation. These structures are thus interesting from the perspective of performing single-molecule conduction measurements on the oligophenylene-ethynylene backbones.     

Dipolar and nonpolar altitudinal molecular rotors mounted on an Au(111) surface

We describe the preparation of a compound whose molecules consist of two metal sandwich stands carrying tentacles with affinity to metal surfaces and holding an axle that carries a dipolar or a nonpolar rotator. The dipolar rotor exists as three pairs of enantiomers, rapidly interconverting at room temperature. When mounted on a gold surface, each molecule represents a chiral altitudinal rotor, with the rotator axle parallel to the surface. The surface-mounted rotor molecules are characterized by several spectroscopic and imaging techniques. At any one time, in about one-third of the dipolar rotors the rotator is free to turn and the direction of its dipole can be flipped by the electric field applied by an STM tip, as revealed by differential barrier height imaging. Molecular dynamics calculations suggest that electric field normal to the surface causes members of one pair of enantiomers to rotate unidirectionally.     

氧化锌有序结构在Au(111)和Cu(111)上的生长

利用NO₂或O₂作为氧化剂,研究了氧化锌在Au(111)和Cu(111)上的生长和结构。NO₂表现了更好的氧化性能,有利于有序氧化锌纳米结构或薄膜的生长。在Au(111)和Cu(111)这两个表面上,化学计量比氧化锌都形成非极性的平面化ZnO(0001)的表面结构。在Au(111)上,NO₂气氛下室温沉积锌倾向于形成双层氧化锌纳米结构;而在更高的沉积温度下,在NO₂气氛中沉积锌则可同时观测到单层和双层氧化锌纳米结构。O₂作为氧化剂时可导致形成亚化学计量比的ZnO_x结构。由于铜和锌之间的强相互作用会促进锌的体相扩散,并且铜表面可以被氧化形成表面氧化物,整层氧化锌在Cu(111)上的生长相当困难。我们通过使用NO₂作为氧化剂解决了这个问题,生长出了覆盖Cu(111)表面的满层有序氧化锌薄膜。这些有序氧化锌薄膜表面显示出莫尔条纹,表明存在一个ZnO和Cu(111)之间的莫尔超晶格。实验上观察到的超晶格结构与最近理论计算提出的Cu(111)上的氧化锌薄膜结构相符,具有最小应力。我们的研究表明,氧化锌薄膜的表界面结构可能会随氧化程度或氧化剂的不同而变化,而Cu(111)的表面氧化也可能影响氧化锌的生长。当Cu(111)表面被预氧化成铜表面氧化物时,ZnO_x的生长模式会发生变化,锌原子会受到铜氧化物晶格的限域形成单位点锌。我们的研究表明了氧化锌的生长需要抑制锌向金属基底的扩散,并阻止亚化学计量比ZnO_x的形成。因此,使用原子氧源有利于在Au(111)和Cu(111)表面上生长有序氧化锌薄膜。     

Adsorptive behavior of dimethylglyoxime on Au(111)

Dimethylglyoxime (DMG) adsorbed on Au(111) was investigated using electrochemical scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). STM experiments revealed three different structures of adsorbed DMG at open circuit potential (~0.07 V versus Ag/AgCl): (2√3×2√3)R30°-α, (2√3×4√3)R30°-β, and (2√3×4√3)R30°-γ. The coverage of adsorbed DMG obtained using XPS was 0.33. A combination of structural and quantitative information identified the adsorbed DMG as an anionic tetramer, held together by intermolecular hydrogen bonding and arrayed in three ordered patterns. Domains of adsorbed DMG underwent phase transitions between the observed structures, most likely due to the influence of the STM tip. However, a significant correlation between the observed structures and the imaging conditions was not found. The ordered layers existed only at open circuit potential as evidenced by their disappearance when the potential was shifted to 0.2 or -0.15 V. The ordered layers were also removed by immersion in a solution of Ni(2+), implying that the adsorbed DMG was converted to a soluble dimer complex with the Ni(2+) ion. This particular observation is discussed in terms of the rigidity of the organic network.     

Self-assembly of a Rh(I) complex on Au(111) surfaces and its electrocatalytic activity toward the hydrogen evolution reaction

The self-assembly of a Wilkinson type of catalyst molecule, trans-RhCl(CO)(PPh3)2, on Au(111) surfaces and its electrocatalytic properties toward the hydrogen evolution reaction (HER) are investigated by employing scanning tunneling microscopy (STM), cyclic voltammetry (CV), and X-ray photoelectron spectroscopy (XPS). The self-assembled monolayers of RhCl(CO)(PPh3)2 are prepared from either dichloromethane or aqueous solutions, but the ordered structures are observed only in atmospheric conditions after solvents evaporate. In the electrolyte solutions, disordered yet uniformly sized spherical clusters of individual molecules are observed as a result of the conformational change of the molecule by the solvation effect of water. The immobilized Rh(I) molecular clusters are electrochemically stable in a wide potential window and exhibit remarkable electrocatalytic activity toward HER in perchloric acid solutions. Several comparative experiments involving similar types of immobilized complexes containing Ru(I) and Ir(I) centers and solution species of RhCl(CO)(PPh3)2 are performed. However, none of them are found to be electroactive to HER. The Tafel slope of HER on the Rh(I) complex modified Au(111) electrode in 0.1 M HClO4 is determined to be -0.061 V, which is almost in the middle of those on bare Au(111) (-0.093 V) and Rh covered (thetaRh approximately 0.3) Au(111) (-0.034 V) electrodes. XPS measurements reveal a valence change of Rh(I) to Rh(0), and an oxidative addition and reductive elimination mechanism is suggested for the enhancement of HER.