Potassium sorbate release from poly(vinyl alcohol)-bacterial cellulose films

Active packaging materials are the subject of research because their performance exceeds that of traditional packaging. From this class, antimicrobial materials extend the shelf-life of products and reduce the risk of contamination by pathogens. In this paper, new composite materials with antimicrobial properties are obtained by using polyvinyl alcohol and bacterial cellulose powder. Potassium (2E,4E)-hexa-2,4-dienoate was used as the antimicrobial agent. The films thus obtained were characterised using Fourier-transform infrared spectroscopy and scanning electron microscopy. Mass transfer phenomena concerning the release of potassium (2E,4E)-hexa-2,4-dienoate were investigated. The results indicated that the new biocomposite films could be used as antimicrobial packaging materials.     

PVA-g-PS复合微球的制备与粒径控制研究

由链转移自由基聚合与端基置换反应法,合成了苯乙稀基单封端的聚醋酸乙烯酯(PVAc)大分子单体,使其与苯乙烯在乙醇/水的混合介质中进行自由基分散共聚,得到了表面以PVAc为接枝链的聚苯乙烯(PVAc-g-PSt)微球。将所得微球在碱性条件下醇解,形成了以亲水性聚乙烯醇(PVA)为壳、聚苯乙烯为核的复合微球(PVAc-g-PSt)。用核磁共振对聚合物的结构进行表征,定出了PVAc末端双键的含量;并用激光光散射、扫描电子显微镜对微球的粒径与形态进行了表征。研究结果表明,在共聚反应体系中大分子单体的分子量与浓度、苯乙烯浓度、引发剂浓度及溶剂的组成对微球的形态和粒径大小有明显影响。     

Effect of aging on flow birefringence of poly(vinyl alcohol) and methyl cellulose solutions

Flow birefringence experiments on aqueous solutions of poly(vinyl alcohol) and of methyl cellulose show that the optical anisotropy changes markedly during aging of the solution. The same effect can be obtained by adding alcohol to fresh aqueous methyl cellulose solutions. The flow birefringence was measured as a function of the velocity gradient on solutions with and without alcohol during the course of aging. The phenomena are attributed to intermolecular and intramolecular interactions between exposed hydroxyl groups of the polymer chains, as these are affected by a change in the degree of hydration during aging or by the addition of a strong hydrophilic agent such as an alcohol. Association or crystallization of the ordered polymer chains may occur and lead to a supermolecular structure in the solutions. By following Sadron's theory and making use of a polar diagram, it was concluded that, after aging or mixing with the additive, the solutions become optically heterogeneous and contain two different components with optical polarizabilities of the same [in poly (vinyl alcohol) solutions] or opposite (in methyl cellulose solutions) sign.     

Interpenetrating polymer network from castor oil-based polyurethanes and poly(methyl methacrylate). XV

The polyurethanes have been prepared from 2.12 functional ? OH containing castor oil and diphenyl methane diisocyanate under identical experimental conditions with a varying NCO/OH ratio. These polyurethanes were swollen in methyl methacrylate and subsequently interpenetrated by free radical polymerization using benzoyl peroxide and crosslinker ethylene glycol dimethacrylate. A series of interpenetrating polymer network (IPN) PU/PMMA IPNs were obtained as films by a transfer moulding technique. These IPNs were characterized by their resistance to chemical reagents, thermal behavior, and mechanical properties. The morphology was shown by SEM and dielectric properties at different temperatures were measured.     

Interpenetrating polymer networks of poly(dimethyl siloxane–urethane) and poly(methyl methacrylate)

Simultaneous IPNs of poly(dimethyl siloxane-urethane) (PDMSU)/poly(methyl methacrylate) (PMMA) and related isomers have been prepared by using new oligomers of bis(β-hydroxyethoxymethyl)poly(dimethyl siloxane)s (PDMS diols) and new crosslinkers biuret triisocyanate (BTI) and tris(β-hydroxylethoxymethyl dimethylsiloxy) phenylsilane (Si-triol). Their phase morphology have been characterized by DSC and SEM. The SEM phase domain size is decreased by increasing crosslink density of the PDMSU network. A single phase IPN of PDMSU/PMMA can be made at an M_c = 1000 and 80 wt % of PDMSU. All of the pseudo- or semi-IPNs and blends of PDMSU and PMMA were phase separated with phase domain sizes ranging from 0.2 to several micrometers. The full IPNs of PDMSU/PMMA have better thermal resistance compared to the blends of linear PDMSU and linear PMMA. © 1993 John Wiley & Sons, Inc.     

Rheological behavior of highly loaded cellulose nanocrystal/poly(vinyl alcohol) composite suspensions

Recent emphasis on the pilot scale production of cellulosic nanomaterials has increased interest in the effective use of these materials as reinforcements for polymer composites. An important, enabling step to realizing the potential of cellulosic nanomaterials in their applications is the materials processing of CNC/polymer composites through multiple routes, i.e. melt, solution, and aqueous processing methods. Therefore, the objective of this research is to characterize the viscoelastic behavior of aqueous nanocomposite suspensions containing cellulose nanocrystals (CNCs) and a water-soluble polymer, poly(vinyl alcohol) (PVA). Specifically, small amplitude oscillatory shear measurements were performed on neat PVA solutions and CNC-loaded PVA suspensions. The experimental results indicated that the methods used in this study were able to produce high-quality nanocomposite suspensions at high CNC loadings, up to 67 wt% with respect to PVA. Additionally, the structure achieved in the nanocomposite suspensions was understood through component attributes and interactions. At CNC loadings near and less than the percolation threshold, a polymer mediated CNC network was present. At loadings well above the percolation threshold, a CNC network was present, indicated by limited molecular weight dependence of the storage modulus. Overall, these results provide increased fundamental understanding of CNC/PVA suspensions that can be leveraged to develop advanced aqueous processing methods for these materials.     

Controlled release of atenolol from freeze/thawed poly(vinyl alcohol) hydrogel

Physically crosslinked polymeric films containing atenolol drug were formulated and the release of the drug was evaluated with view to investigate the feasibility of these films as drug delivery systems. Freezing and thawing process for PVA was used to prepare a controlled release device for atenolol drug. The process included incorporation of the drug into PVA film during the freezing and thawing process. The PVA has used a molecular weight of 125 k and degree of saponification of 98. Various amounts of the atenolol drug were incorporated into the freeze/thawed PVA. The in vitro release behavior of atenolol from these films was investigated. The drug release profiles from the polymeric formulations indicated initial high rate of release followed by slow rate of the release. The release of atenolol increased with increasing drug concentration in the film. The results showed the feasibility of the use of freezing and thawing technique to control the release of atenolol drug from PVA.     

Conversion of solid poly(methyl vinyl ether-alt-maleimide) to poly(methyl vinyl ether-alt-maleic anhydride)

Solid poly(methyl vinyl-alt-maleimide), when subjected to heating at 100°C while being vacuum pumped at 0.1 mm Hg pressure, was converted to a copolymer in which a substantial portion of the imide groups were converted to anhydride groups. Similarly, heating at 100°C at atmospheric pressure in a circulating air oven brought about the same reaction but at a faster rate. This confirms the hypothesis that the formation of maleic anhydride comonomer units from poly(methyl vinyl ether-alt-ammonium maleamate) not only proceeds directly by ring closure of amic acid formed by loss of ammonia but probably also includes, as a parallel pathway, hydrolysis by atmospheric moisture of maleimide comonomer units.     

Photo-responsive microspheres prepared using hydrophobically modified poly(vinyl alcohol)-coumarin conjugate

Photo-responsive microspheres were prepared by dispersing hydrophobically modified poly(vinyl alcohol)-epoxypropoxy coumarin conjugates (HmPVA-EPC) in an aqueous phase. These conjugates were prepared by subsequent covalent attachment of decanoyl chloride (DC) to PVA, and then EPC to HmPVA. The air/water interfacial activities of HmPVA-EPC were higher than unmodified PVA, due to the hydrophobicity of DC moiety. Under a cyclic irradiation by 365 and 254 nm light, the degree of photo-dimerization of EPC residues of HmPVA-EPC was as high as that of free EPC. The obtained HmPVA and HmPVA-EPC were immobilized into submicron-sized microspheres. The degree of Nile Red release from HmPVA-EPC microspheres was more than 75% within 24 h that was higher than the value of 40% for HmPVA microspheres. This difference is most likely due to the less compact packing of HmPVA-EPC in the microspheres due to the smaller number of hydrophobic DC residues. The dye release from HmPVA-EPC microspherses was inhibited by the irradiation with 365 nm light, possibly due to the photo-induced cross-linking of the polymer.     

Properties of new polyelectrolytes based on cellulose and poly(vinyl alcohol)

Carbo- and heterochain tetrazole-containing polyelectrolytes are synthesized via a sequence of cyanoethylation reactions followed by azidation of cyanoethyl derivatives of cellulose and poly(vinyl alcohol). The products exhibit properties typical for polymers containing N-H unsubstituted tetrazole cycles.     

Miscibility and orientation behavior of poly(vinyl alcohol) / poly(vinyl pyrrolidone) blends

The miscibility of poly(viny1 alcohol)/poly(vinyl pyrrolidone) (PVA/PVP) blends is investigated by differential scanning calorimetry (DSC) and wide-angle x-ray diffraction (WAXD). The molecular orientation induced by uniaxial stretching of the blends is also examined by WAXD and birefringence measurements. It is shown by the DSC thermal analysis that the polymer pair is miscible, since a single glass transition temperature (T_g) is situated between the T_gs of the two homopolymers at every composition. The T_g versus composition curve does not follow a monotonic function but exhibits a cusp point at a PVP volume fraction of a little under 0.7, as in a case predicted by Kovacs' theory. The presence of a specific intermolecular interaction between the two polymers is suggested by an observed systematic depression in the melting point of the PVA component. A negative value of the polymer-polymer interaction parameter, χ₁₂ = 0.35 (at 513 K), is estimated from a thermodynamic approach via a control experiment using samples crystallized isothermally at various temperatures. The extent of optical birefringence (Δn) of the drawn blends decreases drastically with increasing PVP content up to 80 wt %, when compared at a given draw ratio, and ultimately Δn is found to change from positive to negative at a critical PVP concentration of a little over 80 wt %. Discussion of the molecular orientation behavior takes into consideration a birefringence compensation effect in the miscible amorphous phase due to positive and negative contributions of oriented PVA and PVP, respectively.     

Structural investigations of polymer liquid-crystalline solutions: Aromatic polyamides,hydroxy propyl cellulose,and poly(γ-benzyl-L-glutamate)

A comparative structural investigation of the characteristics of polymer liquid-crystalline solutions including Kevlar® (PPD-T)/sulfuric acid, poly(Cl-p-phenylene terephthalamide) (Cl-PPD-T)/sulfuric acid, poly(γ-benzyl-L-glutamate) (PγBLG)/dioxane, and hydroxypropyl cellulose (HPC)/water was undertaken. Experimental procedures included polarized light microscopy, light scattering, absorption spectra, and x-ray diffraction on solutions at various concentrations and temperatures. Both the two-phase region at the onset of liquid-crystal formation and the wholly anisotropic phase were investigated. Each solution exhibited distinctive characteristics. The PPD-T and Cl-PPD-T solutions were nematic, and the PγBLG and HPC solutions were cholesteric. In the two-phase region the PPD-T, Cl-PPD-T, and PγBLG (but apparently not the HPC) exhibited negatively birefringent spherulites and aggregates of spherulites. The HPC solutions only exhibited spherulitic structures in the single-phase anisotropic system. The structures and orientations in the anisotropic phase for the various polymer solutions is considered. The helicoidal structural characteristics of the PγBLG and HPC solutions are contrasted.     

Improved oxygen barrier performance of poly(vinyl alcohol) films through hydrogen bond complex with poly(methyl vinyl ether-co-maleic acid)

Hydrogen bonding between poly(methyl vinyl ether-co-maleic acid) (PMVE-MA) and poly(vinyl alcohol) (PVOH) has resulted in films with lower oxygen transmission rates (OTR) than pure PVOH. In the range 20-30% (w/w) PMVE-MA, complexation between the two polymers in the blend was maximized, as shown by viscometry, Fourier Transform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC) analysis. OTR measurements have shown that the maximum interpolymer complexation ratio also correlates with the lowest OTR values of the resulting film. The improved oxygen barrier properties are believed to be a combination of the relatively intact PVOH crystalline regions as shown with X-ray diffraction (XRD) and a higher degree of hydrogen bonding in the amorphous regions of the PVOH and PMVE-MA films as indicated by glass transition temperature (T_g) shifts. This leads to denser amorphous regions that reduces the rate of gases diffusing through the polymer film, hence the reduced OTR.     

Dynamic modification of poly(methyl methacrylate) chips using poly(vinyl alcohol) for glycosaminoglycan disaccharide isomer separation

We describe a microchip electrophoresis (MCE) method for the assay of unsaturated disaccharides of chondroitin sulfates, dermatan sulfates, and hyaluronic acid (HA). Poly(vinyl alcohol) (PVA) could be irreversibly adsorbed onto poly(methyl methacrylate) (PMMA) substrates and this approach was applicable for dynamic coating. The characteristics of the PMMA surface with PVA coating were evaluated in terms of the wettability, EOF, and adsorption of 2-aminoacridone (AMAC)-labeled disaccharide. The water contact angle decreased from 73 degrees on a pristine PMMA surface to 37.5 degrees on a PVA-coated surface, indicating that the PVA coating increased hydrophilicity. EOF was reduced approximately twofold and was relatively stable. Scanning electron microscopy and fluorescence microscopy images showed that adsorption of AMAC-labeled disaccharides was dramatically suppressed. Using the PVA coating, baseline separation of two pairs of glycosaminoglycan (GAG) disaccharide isomers, DeltaDi-diS(B)/DeltaDi-diS(D) and DeltaDi-0S/DeltaDi-HA, was achieved in Tris-borate buffer within 130 s by MCE.     

About the compatibility of polymer components in polymer complexes based on poly(acrylamide) and poly(vinyl alcohol)

The issue of applying the usual concepts of polymer compatibility to nonstoichiometric PVA/PAA mixtures of chemically complementary poly(vinyl alcohol) and poly(acrylamide), which form in water solution InterPC (intermolecular polymer complex) stabilyzed by H‐bonds, and PAA to PVA graft copolymers (PVA‐PAA_N) with different grafted chains number N, that are IntraPC (intramolecular polymer complexes) is discussed. PVA and PAA are compatible on molecular level. At the same time PVA/PAA mixture (50/50 W/W) is characterized by heterogeneous structure consists of InterPC with ϕ_char=9g_PVA/g_PAA and the excess of unconnected PAA. In the case of IntraPC, yet, only PVA‐PAA_N, where N=25, is characterized by a single glass transition temperature (Tg). At larger values of N separate PAA domains form giving rise to the corresponding Tg. These results are discussed in view of IntraPC structure peculiarities as a function of N investigated by IR spectroscopy.     

MMTCA recognition by molecular imprinting in interpenetrating polymer network hydrogels based on poly(acrylic acid) and poly(vinyl alcohol)

A novel IPN hydrogel designed to recognize MMTCA is prepared by applying the molecular-imprinting method. The IPN is characterized by FT-IR, DSC, and SEM. Langmuir analysis shows that an equal class of adsorption is formed in the hydrogel. The adsorption equilibrium constant and the maximum adsorption capacity are evaluated, and the effect of the pH on MMTCA adsorption is discussed. The selectivity of the imprinted polymer for MMTCA is studied in aqueous solutions of MMTCA/aspirin/riboflavin. The results suggest that the MMTCA-imprinted polymer shows superior selectivity for MMTCA as compared to riboflavin and aspirin. The reproducibility of the imprinted polymer to MMTCA is also studied.     

Controlled release of anti-diabetic drug metformin hydrochloride from cellulose/PEG/poly (SA) ter-polymeric hydrogels

In the present work, cellulose pulp, obtained from a paper industry, has been dissolved in PEG/NaOH system and the resulting solution has been polymerized in the presence of monomer sodium acrylate (SA) and crosslinker N, N’ methylene bisacrylamide (MB) via free radical polymerization. These gels have been loaded with anti-diabetic drug Metformin Hydrochloride (Met) and a detailed investigation of release of drug has been studied. Various kinetic models have been applied on the release data. Finally, the in-vivo study has been carried out on albino Wistar rats to see the efficacy of these hydrogel systems in lowering the glucose level.     

Interpenetrating polymer networks of poly(carbonate-urethane) and polystyrene

Simultaneous two-component interpenetrating polymer networks (IPN's), pseudo IPN's, and linear blends of urethane-containing aliphatic polycarbonate (PCU) and polystyrene (PS) have been synthesized and characterized. The simultaneous full IPN's of PCU and PS had one T_g only at compositions above 50 wt % PCU, as determined by DSC and DMA. The single phase morphology in the one T_g region was confirmed by transmission electron microscopy (TEM). However, the pseudo IPN's and linear blends of PCU and PS exhibited multiple (melting and glass) transitions by DSC measurements and phase separation was observed by TEM over the whole composition range. The full IPN's exhibited a maximum in ultimate mechanical properties at an intermediate composition. Superior solvent resistance as well as better thermal stability was shown by the IPN's as compared to the pseudo IPN's linear blends, and pure crosslinked components.     

Preparation of gelatin/poly(vinyl alcohol) film modified by methyl methacrylate and gamma irradiation

The properties of gelatin–polyvinyl alcohol (G–PVA) blend films were improved by methyl methacrylate (MMA) and γ irradiation for a practical viewpoint. The films were prepared by the casting method, modified by glycerol and MMA monomer, and their mechanical properties were also studied. The gelatin-based films were successfully prepared using γ irradiation (3.1 kGy) and gelatin: PVA = 97:3 (w/w) as optimized. Tensile properties of the films were studied and thermal properties of the films were characterized by thermogravimetric analysis and dynamic mechanical analysis pointed out that MMA treated both gelatin films, and G–PVA blend films showed less thermal degradation than untreated films. In addition, structural and morphological features of the gelatin-based films were examined by Fourier transform infrared and scanning electron microscopy, respectively. The ultimate results of the present study showed remarkable enhancement in tensile properties (> 40%) and a reduction in elongation at break of the films, thanks to the MMA addition and γ irradiation.     

Synthesis and characterization of novel photoactive polymer poly(vinyl alcohol)‐graft‐poly(vinyl naphthalene)

A copolymer of poly(vinyl naphthalene) grafted onto poly(vinyl alcohol) has been synthesized with nitroxide‐mediated controlled radical polymerization. By separating the processes of the generation of grafting sites and polymerization, we can avoid the formation of the homopolymer. Because of its architecture, the polymer is soluble in water, despite the high content of hydrophobic groups. The naphthalene chromophores tend to aggregate, forming hydrophobic microdomains in an aqueous solution. Those aggregates exist in a very constrained environment that leads to extraordinarily large redshifts of both the absorption and emission of the polymer. The polymer acts as an efficient photosensitizer in photoinduced electron transfer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2675–2683, 2006