Cyclo- and cyclized diene polymers. XIII. γ-Ray-initiated polymerization of 1,3-dienes

The γ-ray-initiated polymerization of butadiene, isoprene, and 2,3-dimethylbutadiene-1,3 was carried out at temperatures of 20°C. and ?78°C. Polymers of butadiene and isoprene with mixed linear and cyclic structure were proved to result from the polymerization at ?78°C. A monocyclic structure was found for the 2,3-dimethylbutadiene-1,3 polymers initiated either at ?78°C. or in the thiourea canal complex at 20°C.     

Thermally stable polymers based on acetylene-terminated adamantanes

1,3-Diethynyl-5,7-dimethyladamantane, 1,3-diethynyl-5-phenyladamantane, 1,3,5-triethynyladamantane, and 3,3′-diethynyl-1,1′-biadamantane, were synthesized and polymerized thermally at 210°C. The thermoset resins obtained were post-cured at 300°C for 16 h to give materials that exhibited onsets of degradation (TGA) in air at 460–477°C and in helium at 460–485°C. The fully cured materials did not exhibit any detectable DSC transitions between 25 and 400°C. An attempt to thermally polymerize 1-ethynyl-3-phenyladamantane was unsuccessful. © 1992 John Wiley & Sons, Inc.     

Unique Thermal Structural Phase Transitions Exhibited by Unsymmetrical Organometallic Gold(III)-Dithiolene Complexes with Pentylthio and Hexylthio Groups

Unsymmetrical gold(III)-dithiolene complexes are potential candidates for molecular materials that exhibit thermal structural phase transitions. In this study, unsymmetrical ppy-gold(III) (ppy⁻=C-deprotonated-2-phenylpyridine(−)) complexes [AuC5] and [AuC6] coordinated by dithiolene ligands containing tetrathiafulvalene (TTF) skeletons with pentylthio (2-{bis(pentylthio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate(2−)) and hexylthio groups (2-{bis(hexylthio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate(2−)) were synthesized. Both complexes exhibited a large absorption band at approximately 508 nm, owing to intramolecular ligand-to-ligand charge transfer. One-dimensional columnar structures with head-to-tail molecular arrangements around the metal ions were constructed in the crystals. The flexible alkylthio groups were intercalated into crystalline spaces between dithiolene ligands in the columns. [AuC5] exhibits a simple phase transition at 198 °C between crystalline and isotropic phases irreversibly. The crystalline phase of [AuC6] observed at 25 °C melted at 148 °C. Another crystalline phase grew above 148 °C with a very slow crystallization rate from the liquid phase and was completely transformed into an isotropic phase at 200 °C.     

Poly(enonsulfides) from the addition of aromatic dithiols to aromatic dipropynones

Novel poly(enonsulfides) were prepared with inherent viscosities as high as 1.35 dL/g by nucleophilic addition of various aromatic dithiols to 1,1′-(1,3- or 1,4-phenylene)bis(3-phenyl-2-propyn-1-one) in m-cresol at 25–40°C. A tough clear yellow film with a tensile strength of 11,300 psi and a tensile modulus of 466,000 psi at 25°C was cast from a chloroform solution of the polymer prepared from 1,3-dithiobenzene and 1,1′-(1,4-phenylene)bis(3-phenyl-2-propyn-1-one). The poly(enonsulfides) exhibited T_g's as high as 180°C and weight losses of approximately 10% at 331°C in air. The synthesis and characterization of several poly(enonsulfides) are discussed.     

Reaction of thiourea and substituted thioureas with 1,3-dibromopropyne

4-Bromomethylidene-2-imino(phenylimino, acetylimino)-1,3-thiazolidine hydrobromides and 4-bromomethylidene-2-acetylimino-1,3-thiazolidine are synthesized by the reaction of thiourea, N-phenylthiourea, N,N′-diphenylthiourea and N-acetylthiourea with 1,3-dibromopropyne in glacial acetic acid, absolute methanol, acetonitrile at 20°C or upon heating (60°C).     

Copolymerization of styrene with (Z)-1,3-pentadiene in the presence of a syndiotactic-specific catalyst

Copolymerization of styrene with (Z)-1,3-pentadiene affords copolymers mostly containing 1,2 pentadiene units. Both the styrene and the pentadiene units are in syndiotactic arrangement but the comonomer sequence distribution is far from bernoullian. Interestingly, the behavior of (Z)-1,3-pentadiene does not change much when polymerization temperature raises from −20 to +20°C, notwithstanding that (Z)-1,3-pentadiene affords a 1,2-syndiotactic homopolymer at −20°C but a prevailingly 1,4 cis homopolymer at +20°C. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2697–2702, 1997     

Acyl- und Alkylidenphosphane. XXII [1]. Synthese und Struktur des 1, 3-Dimethyl-2,2,4,4-tetrakis-(trimethylsilylsulfano)-1,3-diphosphetans

Acyl- and Alkylidenephosphines. XXII. Synthesis and Structure of 1, 3-Dimethyl-2,2,4,4-tetrakis(trimethylsilylsulfano)-1,3-diphosphetane At ?30°C methylbis(trimethylsilyl)phosphine reacts with carbon disulfide to give a red adduct first which rearranges to [bis(trimethylsilylsulfano)methylidene]methylphosphine 1a . In contrast to the thermally stable phenyl derivative 1b [2], this compound with its insufficiently shielded P?C group dimerizes fast with increasing temperature. 1,3-Dimethyl-2,2,4,4-tetrakis(trimethylsilylsulfano)-1,3-diphosphetane 2a formed by this reaction, crystallizes in the triclinic space group P1 with following dimensions of the unit cell, determined at a temperature of measurement of ?80 ± 3°C: a = 1024.7(3); b = 1360.2(5); c = 1326.3(6)pm; α = 117.85(4); ß = 111.05(3); γ = 72.09(3)°; Z = 2. Due to ring folding at the P1? P2 axis of 149.1°, the molecule shows pseudosymmetry C_s. Characteristic averaged bond lengths and angles obtained at an R_w-value of 0.030, are: P? C(endocyclic) 188 and 191; P? CH₃ 184; C? S 183; S? Si 216 pm; C? P? CH₃ 105; P? C? S 113; S? C? S 114; C? S? Si 108; P? C? P 90 and C? P? C 86°.     

Acyl- und Alkylidenphosphane. XXVIII. Synthese und Struktur von 1,3-Dibenzyl- und 1,3-Diethyl-2,4-bis(phenylimino)-1,3-diphosphetan

Acyl- and Alkylidenephosphines. XXVIII. Synthesis and Structure of 1,3-Dibenzyl- and 1,3-Diethyl-2,4-bis(phenylimino)-1,3-diphosphetane Catalyzed by small amounts of solid sodium hydroxide, the adducts 1a and 1b formed from benzyl- or ethylbis(trimethylsilyl)phosphine and phenylisocyanate, react at +20°C slowly to give hexamethldisiloxane and oligomeric [(phenylimino)methylidene]phosphines. In different solvents the benzyl compound was found to exist only as a mixture of [N,N′-(E)/(Z)]-isomeric 2,4-bis-(phenylimino)-1,3-diphosphetanes 2a with their alkyl groups at the phosphorus atoms in trans position, whereas in case of the ethyl derivative 2b a second pair of [N,N′-(E)/(Z)]-isomeric dimers with their substituents in cis position and two trimeric forms ( 3b and 4b ) could be detected in cyclopentane. [N,N′-(E)]-1r,3t-dibenzyl- ( 2a ) and [N,N′-(E)]-1r,3t-diethyl-2,4-bis(phenylimino)-1,3-diphosphetane 2b isolated from 1,2-dimethoxyethane or cyclopentane, crystallize in the monoclinic space group P2₁/c or P2₁/n, resp., with following dimensions of the unit cell determined at temperatures of measurement of +20 ± 3°C/?130 ± 3°C: a = 2145.4(1)/569.3(1); b = 568.1(2)/719.1(2); c = 1960.2(2)/2042.6(4) pm; β 99.43(1)°/95.03(2)°; Z = (2+2) and 2, resp. X-ray structure determinations (R_w = 0.034/0.041) show both molecules to be centrosymmetric. Characteristic rounded bond lengths (pm) and angles (°) are: endocyclic P? C 185/184; C? P? C 82/81; P? C? P 98/99; exocyclic P? C 186/184; C?N l27/127; C?N? C 121/11.     

Synthesis of poly(silmethylene)s via ring‐opening polymerization of benzocyclobutene functionalized disilacyclobutene and their low‐dielectric and thermal properties

In this work, benzocyclobutene‐introduced poly(silmethylene)s were synthesized by ring‐opening copolymerization of benzocyclobutene (BCB) functionalized disilacyclobutene with phenyldisilacyclobutene. The incorporation ratio of BCB was tailored by changing feeding ratio of 1,3‐dimethyl‐1,3‐dibenzocyclobutene‐1,3‐disilacyclobutane and 1,3‐dimethyl‐1,3‐diphenyl‐1,3‐disilacyclobutane, thus enabling the control of ultimate properties of cured resins. With increasing the incorporation ratios of BCB from 9.5 to 28.9 mol%, T5% of cured resins is improved from 404°C to 462°C, while the dielectric constant is decreased from 2.59 to 2.41 at 10 MHz. The excellent thermal stability and low‐dielectric performance make such thermosets potential inter‐layered or inter‐lined low‐dielectric media. Copyright © 2017 John Wiley & Sons, Ltd.     

Diethylbis(2,2′‐bipyridine)iron/MAO. A Very Active and Stereospecific Catalyst for 1,3‐Diene Polymerization

Diethylbis(2,2′‐bipyridine)Fe/MAO is an extremely active catalyst for the polymerization of 1,3‐dienes. Polymers with a 1,2 or 3,4 structure are formed from butadiene, isoprene, (E)‐1,3‐pentadiene and 3‐methyl‐1,3‐pentadiene, while cis‐1,4 polymers are derived from 2,3‐dimethyl‐1,3‐butadiene. The 1,2 (3,4) polymers obtained at 25°C are amorphous, while those obtained below 0°C are crystalline, as was determined by means of X‐ray diffraction. Mechanistic implications of the results are briefly discussed.     

Ab Initio Study of Conformational Properties of Heteroatom-Containing 1,2-Bisketene Analogues

Abstract

Minimum-energy and transition-state geometries of 4-oxobuta-1,3-diene-1-thione, buta-1,3-diene-1,4-dithione, 4-selenoxobuta-1,3-diene-1-thione, 4-selenoxobuta-1,3-diene-1-one, and buta-1,3-diene-1,4-diselenone were calculated using HF, B3LYP, and MP2 levels of theory and 6–31 + G* basis set by rotation around the related ?C?C? single bonds. In all of the above-mentioned molecules, the s-trans conformation was obtained as the most stable conformer with the 180° dihedral angle. In buta-1,3-diene-1,4-dithione, 4-selenoxobuta-1,3-diene-1-thione, and buta-1,3-diene-1,4-diselenone, the s-cis form of these compounds corresponded to the other energy-minimum geometry. Their skew geometries, with torsional angles approximately 100°, were a transition state for conformational interconversion between the two global minima forms. In 4-oxobuta-1,3-diene-1-thione and 4-selenoxobuta-1,3-diene-1-one, geometries with the C?C?C?C dihedral angles about 51 and 43° (respectively) were attributed to the second energy-minimum geometry. Transition-state structures from both molecules were found in the torsional angles at about 0 and 100°.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.

GRAPHICAL ABSTRACT     

Synthesis of substituted salicylamines and dihydro-2H-1,3-benzoxazines

Phenols were converted to their magnesium salts with the MgCl₂-Et₃N base system and subsequently reacted with Eschenmoser's salt, affording N,N-dimethyl substituted benzylamines in high to excellent yields. A series of mono N-substituted benzylamines were prepared in one-pot syntheses by ortho-formylation of phenols to corresponding salicylaldehydes, which in turn reacted with amines to imines. The imines were subsequently reduced to mono N-substituted benzylamines. Some of these benzylamines were further converted, without work-up, to mono N-substituted dihydro-2H-1,3-benzoxazines.     

Acyl- und Alkylidenphosphane. XIX. Molekül- und Kristallstruktur des 2,4-Bis(dimethylamino)-1,3-diphenyl-1,3-diphosphetans

Acyl and Alkylidenephosphines. XlX. Molecular and Crystal Structure of 2,4-Bis (dimethyl-amino) ?1,3-diphenyl-l, 3-diphosphetane 2,4-Bis(dimethylamino)-1,3-diphenyl-1,3-diphosphetane 2a which is isolated as a byproduct in the synthesis of (E)-(dimethylamino)methylidene-phenylphosphine 1a crystallizes in the monoclinic space group P2₁/c. The dimensions of the unit cell determined at ?65 ± 5°C are: a = 1 004(1); b = 1 018(3); c = 1 873(2) pm; β = 105.15(8)°; Z = 4. As it is shown by a low temperature X-ray structure determination (R_g = 3.5%) the phenyl groups are placed above and the dimethylamino groups below the folded 1,3-diphosphetane ring; the molecule with its differently twisted substituents, however, deviates considerably from point symmetry mm2. The dihedral angle between the P1? C1n? P2 planes (n = 1 or 2) is found to be 153°. The relatively long Pn? C1n bond distances (187 to 191 pm) indicate a strained ring system; in solution 2a decomposes to some extent and forms monomeric 1a again. Further characteristic average bond distances and angles are: Pn? C4n (phenyl) 184; C? N 146 pm; P1? C1n? P2 93°; C11? Pn? C12 84° and Pn? C1n? Nn 116°.     

Isolation and cationic ring-opening polymerization of 2,3,5,6-tetrahydroimidazo[2,1-b][1,3]oxazole to produce a thermally stable polyurea

A bicyclic pseudourea, 2,3,5,6-tetrahydroimidazo[2,1-b][1,3]oxazole ( 1 ), was isolated for the first time, and its cationic and spontaneous polymerizations were examined. Both polymerizations gave poly(1,3-imidazolidin-2-one-1,3-diylethylene) ( 2 ) in high yields. The polymer is a crystalline solid with glass transition and melting temperature of 51°C and 286°C, respectively. Thermogravimetry showed that it is stable up to 450°C under nitrogen.     

Polypyrazolinones from aromatic di(propynoic ester)s and aromatic dihydrazines

Novel polypyrazolinones with inherent viscosities ranging from 0.12 to 0.44 dL/g were prepared by the Michael-type nucleophilic addition-cyclization of various dihydrazines with 3,3′-(1,3- or 1,4-phenylene)bis(ethyl propynoate) (1,3- or 1,4-PEP) and 3,3′-(1,4-phenylene)bis(phenyl propynoate) (1,4-PPhP) in N-methylpyrrolidone (NMP) solution at 25–110°C. The polymers exhibited moderate thermal stability with initial weight loss in air about 200°C and in nitrogen about 300°C (TGA). No apparent T_g′s were observed by DSC analysis. The synthesis and characterization of the polypyrazolinones is discussed.     

Thermal behavior of trans,trans,trans-1,2,3,4-tetravinylcyclobutane

Above 42°C the title compound decomposes to trans-hexatriene and cyclohexadiene-1,3. At temperatures above 770°C only cyclohexadiene-1,3 and benzene are found.     

Free‐radical polymerization of dioxolane and dioxane derivatives: Effect of fluorine substituents on the ring opening polymerization

Partially fluorinated and perfluorinated dioxolane and dioxane derivatives have been prepared to investigate the effect of fluorine substituents on their free‐radical polymerization products. The partially fluorinated monomer 2‐difluoromethylene‐1,3‐dioxolane (I) was readily polymerized with free‐radical initiators azobisisobutyronitrile or tri(n‐butyl)borane–air and yielded a vinyl addition product. However, the hydrocarbon analogue, 2‐methylene‐1,3‐dioxolane (II), produced as much as 50% ring opening product at 60 °C by free‐radical polymerization. 2‐Difluoromethylene‐4‐methyl‐1,3‐dioxolane (III) was synthesized and its free‐radical polymerization yielded ring opening products: 28% at 60 °C, decreasing to 7 and 4% at 0 °C and −78 °C, respectively. All the fluorine‐substituted, perfluoro‐2‐methylene‐4‐methyl‐1,3‐dioxolane (IV) produced only a vinyl addition product with perfluorobenzoylperoxide as an initiator. The six‐membered ring monomer, 2‐methylene‐1,3‐dioxane (V), caused more than 50% ring opening during free‐radical polymerization. However, the partially fluorinated analogue, 2‐difluoromethylene‐1,3‐dioxane (VI), produced only 22% ring opening product with free‐radical polymerization and the perfluorinated compound, perfluoro‐2‐methylene‐1,3‐dioxane (VII), yielded only the vinyl addition polymer. The ring opening reaction and the vinyl addition steps during the free‐radical polymerization of these monomers are competitive reactions. We discuss the reaction mechanism of the ring opening and vinyl addition polymerizations of these partially fluorinated and perfluorinated dioxolane and dioxane derivatives. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5180–5188, 2004     

The cyclodimerisation of 3-methyl-2-butenenitrile

3-Methyl-2-butenenitrile (1) cyclodimerised on treatment with lithium diisopropylamide in dimethoxyethane at temperatures between ?78°C and 0°C to 3-amino-4-cyano-1,5,5-trimethyl-1,3-cyclohexadiene (2) the structure of which was established by acid hydrolysis to the known 4-cyano-1,5,5-trimethyl-1-cyclohexene-3-one (3).     

Polyfluoro-compounds based on the cycloheptane ring system. Part 7. Ethoxypolyfluorocycloheptenes and polyfluorocycloheptenones

Dodecafluorocycloheptene and ethanolic potassium hydroxide afforded 1- ethoxyundecafluorocycloheptene which at 410°C decomposed to decafluorocyclohept-2-enone. Decafluorohepta-l,3-diene likewise gave mainly 1-ethoxynona- fluoro-, together with some 1,4-diethoxyoctafluoro-cyclohepta-1,3-diene. The 1-ethoxy-1,3-diene was photoisomerised to 1-ethoxynonafluorobicyclo- (3,2,0)hept-6-ene (proving its structure), and was decomposed on pyrolysis at 430°C to give a complex mixture, from which octafluorocyclohepta-2,4- dienone was isolated.     

Phospha-s-triazines. IV. Degradation studies of 1-diarylphospha-3,5-bis(perfluoroaliphatic)-2,4,6-triazines and 1,3,-bis(diarylphospha)-5-perfluoroaliphatic-2,4,6-triazines

Thermal and thermal oxidative stability evaluations were performed on mono- and diphospha-s-triazines at 235 and 316°C using sealed Pyrex ampoules. The specific compounds studied were: 1-diphenylphospa-3,5-bis(perfluoro-n-heptyl)-2,4,6-triazine, 1-diphenylphospha-3,5-bis(perfluoro-alkylether)-2,4,6-triazines, their respective pentafluorophenyl analogues, 1,3-bis(diphenylphospha)-5-perfluoro-n-heptyl-2,4,6-triazine and 1,3-bis(diphenylphospha)-5-perfluoroalkylether-2,4,6-triazine. All the compounds wherein phenyl groups were present on the phosphorous exhibited good thermal stability up to 316°C; the analogous pentafluorophenyl substituted materials were degraded extensively at these temperatures. The oxidative stability of both the mono- and diphospha-s-triazines was excellent at 235°C, but at 316°C some degradation was observed. This was more pronounced in compounds containing the perfluoroalkyl moiety on carbon than in the perfluoroalkylether substituted members of the series.