Flow Injection Manifold for Simultaneous Spectrophotometric Determination of Bi (III), Pb (II)

Abstract

A FIA assembly producing a carrier with pH which can be adjusted to the desired pH value is propposed. It is based on the merging of two different solutions, one of them at constant flow-rate and the other at variable flow-rate. This manifold has been used for the simultaneous determination of Bi(III) and Pb(II) with Arsenazo III. Calibration curves are linear in the 1.0-11.0 ppm Bi (III) range at pH 0.25 and 1.0-12.1 ppm Pb (II) at pH 2.15. The effect of foreign ions is also reported.     

水热法制备Bi2O3纳米片及其电化学性能的研究

以Bi(NO₃)₃和氨水为原料、水溶性淀粉为分散剂, 采用水热法制备了Bi₂O₃纳米片, 用X射线衍射(XRD)、扫描电子显微技术(SEM)和氮气吸附-脱附等对材料进行了表征. 结果表明Bi₂O₃纳米片厚度分布比较窄, 比表面积达到9.26 m²/g. 同时, 采用循环伏安法和充放电仪测试了Bi₂O₃纳米片的电化学性能, 结果显示其具有一定的电化学活性.     

Synthesis and characterization of some methylbismuth (III) O,O‐alkylenedithiophosphates: convenient transformation of and to pure Bi2S3

A series of methylbismuth(III)O,O‐alkylenedithiophosphates of the type [where G = CH₂CH(CH₃) ( 1 ), (CH₂)₄ ( 2 ), CH₂CH₂CH(CH₃) ( 3 ), CH(CH₃)CH(CH₃) ( 4 ), CH₂CHCH₂CH₃ ( 5 ), CH(CH₃)CH₂C(CH₃)₂ ( 6 ) and C(CH₃)₂C(CH₃)₂ ( 7 )] have been isolated by the reaction of methylbismuth(III) dichloride with potassium salt of O,O‐alkylenedithiophosphoric acids in 1:2 molar ratio in anhydrous benzene. These newly synthesized derivatives were characterized by elemental analyses, FT IR and multinuclear NMR (¹H, ¹³C and ³¹P) spectral studies. Thermogravimetric analysis of 6 has shown a single‐step decomposition of complex to Bi₂S₃ at 154.3 °C. Transformation of 2 and 6 to pure Bi₂S₃ was carried out successfully at refluxing xylene temperature (142 °C) as revealed by XRD and SEM analyses. Copyright © 2006 John Wiley & Sons, Ltd.     

Lu2O3∶Bi3+粉末晶体发光性能的研究

采用共沉淀法和燃烧法分别制备得到纳米和亚微米的Lu2O3∶Bi^3＋的粉末晶体。立方结构,属Ia3^-[206]空间群,晶格常数a=1.039 nm,密度高达9.4 g·cm^-3。利用XRD,TEM,荧光光谱和阴极射线发光等方法,研究了不同的制备方法和条件对制成样品的结构、形貌、发光亮度、光谱以及余辉的影响。两种方法制得的样品在紫外和阴极射线激发下,有亮度较高的兰青色的发光。余辉较短,衰减曲线是单指数型。     

金纳米颗粒@碳微球的制备及其电化学检测汞离子性能研究

本文研究了金纳米颗粒@碳微球(Au@CMSs)的制备及水环境中汞离子在该材料上的电化学行为. 实验结果表明,在0.1mol•L^-1 pH = 5.0的NaAc-HAc缓冲溶液中,采用方波伏安法测定汞离子,其浓度与氧化峰电流强度线性良好,相关系数为0.997,检出限为3.69 × 10^-8 mol•L^-1（3σ方法）.     

C3H2环丙烯基自由基与O(3P)反应机理的理论研究

本文用量子化学密度泛函方法对C3H2 (环丙烯基自由基)与O(3P)反应的机理进行了理论研究。在B3LYP/6-311++G**计算水平上优化了各驻点（过渡态,中间体,产物）的几何结构,在QCISD(T)/6-311++G**水平下计算了各物质的单点能量,在两种水平下计算了298K和600K时的能量。计算结果表明：C3H2 + O(3P) 反应可以生成P1 (C2H +HCO),P2 (C2H2 + CO) 和P3 (HC3O+H)三种产物。生成P1反应通道的能垒最低,即P1为主要产物,与实验的结果一致。产物P1可以通过路径：R→ IM1→ IM2→ P1获得。本文详细地讨论了C3H2 + O(3P) 的反应机理,并从理论上对实验结果进行了验证。研究结果有助于深入理解C3H2 + O(3P)反应机理以及C3H2在大气中的燃烧过程。     

Novel Three-dimensional Sensor for Rapid Detection of Pb(II) and Cd(II) in Edible Mushrooms

A sensing platform was developed based on the molybdenum disulfide-reduced graphene oxide (MoS₂-RGO). The flower-like MoS₂-RGO nanocomposite had a large number of active sites such as oxygen-containing groups and highly reactive sulfur that contributed to the adsorption and preconcentration of heavy metal ions (HMIs). MoS₂-RGO was synthesized by one-step reduction method. Under optimized conditions, the limits of detection (LODs) for Pb(II) and Cd(II) was 0.13 μg/L and 0.59 μg/L with a linear range of 4.1–207.2 μg/L and 2.2–112.4 μg/L, respectively. The modified sensors had been successfully applied to detect Pb(II) and Cd(II) in three kinds of edible mushrooms.     

Synergy of Bi2O3 and RuO2 Nanocatalysts for Low-Overpotential and Wide pH-Window Electrochemical Ammonia Synthesis

Electrocatalytic nitrogen reduction reaction (NRR) under ambient conditions is still seriously impeded by the inferior NH₃ yield and low Faradaic efficiency, especially at low overpotentials. Herein, we report the synthesis of nano-sized RuO₂ and Bi₂O₃ particles grown on functionalized exfoliated graphene (FEG) through in situ electrodeposition, denoted as RuO₂−Bi₂O₃/FEG. The prepared self-supporting RuO₂−Bi₂O₃/FEG hybrid with a Bi mass loading of 0.70 wt% and Ru mass loading of 0.04 wt% shows excellent NRR performance at low overpotentials in acidic, neutral and alkaline electrolytes. It achieves a large NH₃ yield of 4.58±0.16 μg_NH3 h⁻¹ cm⁻² with a high Faradaic efficiency of 14.6 % at −0.2 V versus reversible hydrogen electrode in 0.1 M Na₂SO₄ electrolyte. This performance benefits from the synergistic effect between Bi₂O₃ and RuO₂ which respectively have a fairly strong interaction of Bi 6p orbitals with the N 2p band and abundant supply of *H, as well as the binder-free characteristic and the convenient electron transfer via graphene nanosheets. This work highlights a new electrocatalyst design strategy that combines transition and main-group metal elements, which may provide some inspirations for designing low-cost and high-performance NRR electrocatalysts in the future.     

Vacuum Ultraviolet Excited Photoluminescence Properties of Y202S:Eu3+,Bi3+ Phosphor

As an Hg-free lamp using phosphor,the Bi3+ and Eu3+ co-doped Y2O2S phosphors were prepared and their luminescence properties under vacuum uitraviolet(VUV) excitation were investigated.The VUV photolumineseent intensity of Y2O2S:Eu3+ was weak,however,considerably stronger red emission at 626 nm with good color purity was observed in Y2O2S:Eu3+,Bi3+ systems.Investigation on the photoluminescence reveals that the strong VUV luminescence of Y2O2S:Eu3+,Bi3+ at 147 nm is mainly because the Bi3+ acts as a medium and effectively performs the energy transfer process: Y3+-O2→Bi3+→Eu3+,while the intense emission band at 172 nm is attributed to the absorption of the characteristic 1So-1P1 transition of Bi3+ and the direct energy transfer from Bi3+ to Eu3+.The Y2O2S:Eu3+,Bi3+ shows excellent VUV optical properties compared with the commercial (Y,Gd)BO3:Eu3+.Thus,the Y2O2S:Eu3+,Bi3+ can be a potential red VUV-excited candidate applied in Hg-free lamps for backlight of liquid crystal display.     

TiO2/Bi2O3纳米复合体的制备及可见光催化产氢性能

首先采用相分离的水解-溶剂热法制备了Bi₂O₃纳米粒子,然后利用简单的湿化学法在Bi₂O₃表面负载不同比例的TiO₂纳米颗粒,进而得到TiO₂/Bi₂O₃纳米复合体。通过气氛调控的表面光电压谱(SPS)等测试表明,表面负载适量的TiO₂后能够提高Bi₂O₃光生电荷分离。可见光催化产氢和降解污染物测试结果进一步证明,表面负载适量的TiO₂后可显著提高其可见光催化活性,其中Ti/Bi摩尔比为7%时具有最高的光催化活性。这主要归因于TiO₂具有较为合适的导带能级位置,可以接收Bi₂O₃在可见光激发下所产生的高能级电子,从而抑制光生电子-空穴对复合,并且维持了高能级电子较高的还原能力。     

Ni(II), Pd(II), Cu(II) And Zn(II) complexes with N-(2-Pyridyl)Carbonylaniline (L), Syntheses and X-Ray Crystal structures of [Cu(L)2(H2O)2](No3)2, [Cu(L)2(H2O)2](Clo4)2 and [Zn(L)2(H2O)2](Clo4)2

Reaction of the N-(2-pyridyl)carbonylaniline ligand (L) with Cu(NO₃)₂, Cu(ClO₄)₂, Zn(ClO₄)₂, Ni(NO₃)₂ and PdCl₂ gives complexes with stoichiometry [Cu(L)₂(H₂O)₂](NO₃)₂, [Cu(L)₂(H₂O)₂](ClO₄)₂, [Zn(L)₂(H₂O)₂] (ClO₄)_2, [Ni(L)₂(H₂O)Cl](NO₃) and PdLCl₂. The new complexes were characterized by elemental analyses and infrared spectra. The crystal structures of [Cu(L)₂(H₂O)₂](NO₃)₂, [Cu(L)₂(H₂O)₂](ClO₄)₂, and [Zn(L)₂(H₂O)₂](ClO₄)₂ were determined by X-ray crystallography. The cation complexes [M(L)₂(H₂O)₂] contain copper(II) and zinc(II) with distorted octahedral geometry with two N-(2-pyridyl)carbonylaniline (L) ligands occupying the equatorial sites. The hexa-coordinated metal atoms are bonded to two pyridinic nitrogens, two carbonyl oxygens and two water molecules occupying the axial sites. Both the coordinated water molecules and uncoordinated amide NH groups of the N-(2-pyridyl)carbonylaniline (L) ligands are involved in hydrogen bonding, resulting in infinite hydrogen-bonded chains running in one and two-dimensions.     

NO在Er2O3/Bi2O3催化剂上的程序升温分解

NOx是造成大气污染的化学物质之一,因此,消除NOx是环境保护的一项重要任务,目前比较成熟的消除NOx工艺是用氨为还原剂和V2O5/TiO2为催化剂的选择催化还原(SCR)法[1],但其成本过高.     

Morphology Control of Bi2S3 Nanostructures and the Formation Mechanism

Bismuthinite (Bi₂S₃) nanostructures were prepared by a hydrothermal method with sodium ethylenediaminetetraacetate (EDTA‐Na₂). The morphology of Bi₂S₃ nanostructures was changed from a nanorod to a nanoplate by presence of the EDTA‐Na₂. The altered morphology was caused by the capping effect of EDTA‐Na₂ with Bi³⁺ ions, which induces the suboptimal growth direction due to partially blocking the preferential orientation direction. When the EDTA‐Na₂/Bi³⁺ molar ratio=1, the growth of Bi₂S₃ nanostructures was not allowed due to the chelating effect of EDTA‐Na₂. The obtained Bi₂S₃ nanorods, stacked nanorods, nanoplates and nanoparticles were characterized using X‐ray diffraction (XRD), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED) pattern. A possible formation mechanism of these morphologies was proposed. The successful synthesis of various morphologies of nanostructured Bi₂S₃ may open up new possibilities for thermoelectric, electronic and optoelectronic uses of nanodevices based on Bi₂S₃ nanostructure.     

Individual and Simultaneous Voltammetric Determination of Cd(II), Cu(II) and Pb(II) Applying Amino Functionalized Fe3O4@Carbon Microspheres Modified Electrode

Amino‐functionalized Fe₃O₄@carbon microspheres (NH₂?Fe₃O₄@C) were prepared and the electrochemical sensor was constructed using NH₂?Fe₃O₄@C modified glassy carbon electrodes (GCE) to determine toxic heavy metals in aqueous solution. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) were used to characterize the structure and phase of NH₂?Fe₃O₄@C. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) results indicate that NH₂?Fe₃O₄@C modified GCE possesses large active area and excellent electron transfer. Under optimized electrochemical condition, Cd(II), Pb(II) and Cu(II) were determined using NH₂?Fe₃O₄@C modified GCE. The electrode through amino functionalization exhibits higher sensitivity and lower detection limit toward Cd(II) and Cu(II) due to the acid‐base pairing interaction between the electron‐rich ?NH₂ ligand and the electron‐deficient heavy metal ions. Compared with other similar results reported in the literature, the NH₂?Fe₃O₄@C modified electrode exhibits wider linear response range while with comparable lower detection limit. It also exhibits excellent stability, reproducibility and anti‐interference ability.     

Pb(II) and Bi(III) complexes involving a Schiff base ligand: syntheses,structures, physical,and antioxidant properties

Two new complexes, {[PbL(NO₃)₂H₂O]H₂O}_n (1) and [BiL₂(NO₃)₂]NO₃ (2), based on (E)-3-chloro-6-[2-(pyrazin-2-ylmethylene)hydrazinyl]pyridazine (L) were synthesized and characterized by IR spectra, single-crystal X-ray diffraction, and elemental analyzes. X-ray single crystal diffraction experiments of 1 and 2 display that extensive hydrogen bonds and π…π stacking interactions construct the 1-D infinite chain {[PbL(NO₃)₂H₂O]H₂O}_n and [BiL₂(NO₃)₂]NO₃ into two 3-D supramolecular frameworks. Interestingly, pure phase PbO nano-particles were synthesized by thermolysis of 1 and characterized by scanning electron microscopy and X-ray powder diffraction analyzes. Furthermore, antioxidant activities of L, 1, and 2 were also studied.     

Atomic Simulations of Aurivillius Oxides: Bi3TiNbO9, Bi4Ti3O12, BaBi4Ti4O15 and Ba2Bi4Ti5O18 Doped with Pb,Al, Ga,In, Ta

The Aurivillius oxides were originally of interest for their ferroelectric properties and have recently been explored in the field of oxide ion conductivity. Atomistic simulation methods have been carried out for Bi₃TiNbO₉, Bi₄Ti₃O₁₂, BaBi₄Ti₄O₁₅ and Ba₂Bi₄Ti₅O₁₈ doped with Pb, Al, Ga, In, Ta to determine defect energy in the materials by employing efficient energy minimization procedures. The calculations rest upon the specification of an interatomic potential model, which expresses the total energy of the system as a function of the nuclear coordinates. The Born model framework, which partitions the total energy into long‐range Coulombic interactions and a short‐range term to model the repulsions and van der Waals forces between electron charge clouds, is employed. This is embodied in the GULP simulation code. Dopant solution energy versus ion size trends are found for both isovalent and aliovalent dopant incorporation at Bi and Ta sites. Trivalent dopants (Al, Ga, In) and Pb are more favorable on the Bi site, whereas Ta dopants preferentially occupy the Ti site.     

H2O在Fe3O4 (111)表面吸附的结构及热力学研究

使用密度泛函理论（GGA/PBE）对H₂O在Fe_tet1-和Fe_oct2-终结Fe₃O₄ (111)表面的吸附行为进行了研究。对于Fe_tet1-终结表面,在1/5 ML覆盖度下,带有氢键的H₂O分子以及异裂解离的结构具有最高的稳定性,而类似水合氢离子的OH₃⁺-OH结构出现在2/5 ML覆盖度下,其次为带有氢键的水的聚合体。这些结果与实验中观测到的现象一致。对于Fe_oct2-终结表面,在1/6 ML覆盖度下,分子态H₂O的吸附是有利的,而在1/3 ML覆盖度下多种吸附形式共存。H₂O吸附在Fe_tet1-终结表面比吸附在Fe_oct2-终结表面热力学上更有利。此外,通过计算局域态密度（LDOS）对吸附机理进行了分析。     

Electrochemical Detection of Pb(II) by Glassy Carbon Electrode Modified with Amine-Functionalized Magnetite Nanoparticles

An amine-Fe₃O₄ modified glassy carbon (GC) electrode was constructed for detecting Pb(II) ions in wastewater. The electrode was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Square wave anodic stripping voltammetry (SWASV) was used to detect the Pb(II), and the detection limit of Pb(II) was 0.15 µM. The sensitivity of the electrode to detect Pb(II) was about 10.07 µA/µM, with a correlation coefficient of 0.991, which was approximately 10 times bigger than that of a pure Fe₃O₄ modified electrode. The electrode also showed good selectivity and stability. This results indicated that the amine-magnetite material could have some potential applications in heavy metal ions detection in wastewater.     

BiO3对染料的光催化降解性能

近年来 ,利用半导体材料光催化降解有害污染物已成为比较热门的研究课题之一 [1,2 ] ,因其能有效地利用太阳能并在反应中产生强氧化能力的空穴和羟基自由基 ,因而备受人们的关注 .目前使用较多的是催化活性高 ,稳定性好的 Ti O2 [3] ,但由于其带隙较宽 ( 3.2 e V) ,只能吸收波长 λ≤ 387nm的紫外光 .因此研制新型光催化剂或改善催化效率仍是重要研究课题 .近年来 ,有报道用 Bi2 O3光催化处理含亚硝酸盐废水的实验研究 [4 ] ,结果比较满意 .本研究对 Bi2 O3的制备、表征及其作光催化剂处理各种染料溶液进行实验 ,结果表明 ,Bi2 O3具有较…     

Ag@SiO2纳米颗粒的制备及其在H2O2检测上的应用

利用柠檬酸三钠还原硝酸银制备了银纳米颗粒(AgNPs),然后通过氨水水解正硅酸乙酯(TEOS)的方法,在AgNPs上沉积SiO2,制备出以Ag为核,SiO2为壳的复合纳米颗粒(Ag@SiO2).调节TEOS用量,可以控制SiO2层的厚度.根据AgNPs的局域表面等离激元共振(LSPR)效应,将制得的Ag@SiO2颗粒用于H2O2的检测,检测下限为1μmol/L,并可以通过控制SiO2层的厚度方便地调节Ag@SiO2颗粒与H2O2反应的速率.与传统方法相比,具有简单、快速、成本低的优点.分别运用TEM、紫外-可见分光光度计对反应前后Ag@SiO2颗粒形貌及反应过程中其LSPR吸收的变化进行了表征.