Voltammetric methods for speciation analysis of trace metals in natural waters

Trace metals play an important role in the regulation of primary productivity and phytoplankton community composition. Metal species directly affects the biogeochemical cycling processes, transport, fate, bioavailability and toxicity of trace metals. Therefore, developing powerful methods for metal speciation analysis is very useful for research in a range of fields, including chemical and environmental analysis. Voltammetric methods, such as anodic stripping voltammetry (ASV) and competing ligand exchange-adsorptive cathodic stripping voltammetry (CLE-AdCSV), have been widely adopted for speciation analysis of metals in different natural aquatic systems. This paper provides an overview of the theory of voltammetric methods and their application for metal speciation analysis in natural waters, with a particular focus on current voltammetric methods for the discrimination of labile/inert fractions, redox species and covalently bound species. Speciation analysis of typical trace metals in natural waters including Fe, Cu, Zn, Cd, and Pb are presented and discussed in detail, with future perspectives for metal speciation analysis using voltammetric methods also discussed. This review can elaborate the particular knowledge of theory, merits, application and future challenge of voltammetric methods for speciation analysis of trace metals in natural waters.     

Spectrophotometric determination of zinc and copper in a multi-syringe flow injection analysis system using a liquid waveguide capillary cell: application to natural waters

This work exploits a multi-syringe injection analysis (MSFIA) system coupled with a long liquid waveguide capillary cell for the spectrophotometric determination of zinc and copper in waters. A liquid waveguide capillary cell (1.0 m pathlength, 550 μm i.d. and 250 μL internal volume) was used to enhance the sensitivity of the detection. The determination for both ions is based on a colorimetric reaction with zincon at different pH values. The developed methodology compares favourably with other previously described procedures, as it allows to reach low detection limits for both cations (LODs of 0.1 and 2 μg L⁻¹, for copper and zinc, respectively), without the need for any pre-concentration step. The system also provided a linear response up to 100 μg L⁻¹ with a high throughput (43 h⁻¹) and low reagent consumption and effluent production. The developed work was applied to natural waters and three certified reference water samples.     

On-line preconcentration of trace carcinogenic polycyclic aromatic hydrocarbons (PAHs) in microcolumn liquid chromatography via large volume injection

The ability and efficiency of micro precolumns made of C30 particles, monolithic silica C18 stationary phase and quartz wool coated with C30, which act as novel solid phase absorbing materials, for the on-line enrichment of aqueous polycyclic aromatic hydrocarbons (PAHs) in microcolumn liquid chromatography (LC) was investigated. The enrichment unit was designed in such a way that micro precolumns were directly connected to a 6-port micro injection valve via fused-silica tubing (0.05 mm I.D.) in order to minimize band broadening of the samples, and the enrichment efficiency of the three materials was tested using 14 PAHs, which are selected by the US Environmental Protection Agency (US EPA), as the analytes. The separation of PAHs was evaluated by using laboratory-made C30 or ODS capillary columns and the results were compared. There were no significant differences showed from the separation of PAHs in terms of peak signal between the C30 and ODS capillary columns, but the C30 capillary column was chosen for the following experiment due to its ability to produce better repeatability than the ODS column. By using the three kinds of precolumn materials, results showed that the precolumn packed with C30 particles as well as the capillary monolithic C18 precolumns (0.1 or 0.2 mm I.D.) provided better recovery than those of the quartz wool's. As long as the recovery and separation of the PAHs were concerned, 0.1 mm I.D. monolithic C18 precolumn showed the best results and the R.S.D.s (N = 7) for the retention time, peak area and peak height were between 0.70-1.5, 2.3-5.8 and 2.4-6.6%, respectively. Large volume injection up to 0.5 mL, i.e. 2500-fold enrichment, was possible and no negative effect on the separation profile was found. The LOD (S/N = 3) were between 0.10 and 4.6 pg mL⁻¹, while the LOQ (S/N = 10) were in the range of 0.32-15 pg mL⁻¹, which showed that the system is comparable to many major analytical techniques and is sensitive enough for the trace analysis of PAHs in environmental samples. The system was then applied to the determination of trace PAHs present in soil sample which was randomly taken from a nearby highway.     

Large volume sample introduction using temperature programmable injectors: Implications of liner diameter

Temperature programmable injectors with liner diameters ranging from 1 to 3.5 mm are evaluated and compared for solvent split injection of large volumes in capillary gas chromatography. The liner dimensions determine whether a large sample volume can be introduced rapidly or has to be introduced in a speed controlled manner. The effect of the injection technique used on the recovery of n-alkanes is evaluated. Furthermore the influence of the liner diameter on the occurrence of thermal degradation during splitless transfer to the analytical column is studied. Guidelines are given for the selection of the PTV liner internal diameter best suited for specific applications.     

Determination of organophosphorus pesticides by gas chromatography with mass spectrometry using a large‐volume injection technique after magnetic extraction

A fast and efficient method was developed for the extraction and determination of organophosphorus pesticides in water samples. Organophosphorus pesticides were extracted by solid‐phase extraction using magnetic multi‐walled carbon nanotubes and determined by gas chromatography with ion‐trap mass spectrometry. Parameters affecting the extraction were investigated. Under optimum conditions of the method, 10 mg magnetic multi‐walled carbon nanotubes were added into 10 mL sample. After 2 min, adsorbent particles settled at the bottom of test tube with a magnet. After removing aqueous supernatant, the analytes were desorbed with acetonitrile. Then, 70 μL of acetonitrile phase was injected into the gas chromatography and mass spectrometry system that had an ion‐trap analyzer. To achieve high sensitivity, the large‐volume‐injection technique was used with a programmed temperature vaporization inlet, and the ion‐trap mass spectrometer was operated in single ion storage mode. Under the best conditions, the enrichment factors and extraction recoveries were in the range of 113–124 and 74–103%, respectively. The limits of detection were between 3 and 15 ng/L, and the relative standard deviations were < 10%. This method was successfully used for the determination of organophosphorus pesticides in dam water, lagoon water, and river water samples with good reproducibility and recovery.     

Ultratraces analysis of organochlorine pesticides in drinking water by solid phase extraction coupled with large volume injection/gas chromatography/mass spectrometry

This study describes an SPE coupled with large volume injection (LVI) analytical method for the analysis of organochlorine pesticides, BHC (alpha, beta, delta), aldrin, endosulfan (alpha, beta), endrin, dieldrin, and DDT, from aqueous samples. Determination was carried out by GC with MS. The LODs of organochlorine pesticides were determined at 10 ng/L concentration levels, and the results show that SPE-LVI-GC/MS has the potential to accurately determine organochlorine pesticides in water, as it avoids analyte classes in the various steps of a typical extraction procedure.     

Determination of nanomolar concentrations of phosphate in natural waters using flow injection with a long path length liquid waveguide capillary cell and solid-state spectrophotometric detection

A flow injection manifold incorporating a 1 m liquid waveguide capillary cell and a miniature fibre-optic spectrometer for the determination of low phosphorus concentrations in natural waters is reported. The limit of detection (blank + 3 S.D.) was 10 nM using the molybdenum blue chemistry with tin(II) chloride reduction. The sensitivity of the flow injection manifold was improved by 100-fold compared with a conventional 1 cm flow cell. The response was measured at 710 nm and background corrected by subtracting the absorbance at 447 nm. Interference from silicate was effectively masked by the addition of 0.1% (m/v) tartaric acid and results were in good agreement (P = 0.05) with a segmented flow analyser reference method for freshwater samples containing 1 μM phosphate.     

Environmental applications of large volume injection in capillary GC using PTV injectors

Temperature programmable (PTV) injectors with packed widebore (ca. 3.5 mm i.d.) liners are used for large volume injection in capillary gas chromatography with the aim to simplify and/or improve off-line sample pretreatment proecdures. A simple procedure for optimization of large volume PTV injection is described. The system performance, i.e. linearity and repeatability, is evaluated for polar nitrogen/phosphorus containing pesticides (PTV-GC-NPD) and organochlorine pesticides (PTV-GC-ECD) in river water extracts as well as for polycyclic aromatic hydrocarbons (PAHs) in river sediment (PTV-GC-MS).     

Automated at-line solid-phase extraction-gas chromatographic analysis of micropollutants in water using the PrepStation

A fully automated at-line solid-phase extraction-gas chromatography procedure has been developed for the analysis of aqueous samples using the PrepStation. The sample extract is transferred from the sample preparation module to the gas chromatograph via an autosampler vial. With flame-ionization detection, limits of determination (S/N=10) of 0.05–0.13 μg/l were obtained for the analysis of HPLC-grade water when modifying the PrepStation by: (i) increasing the sample volume to 50 ml, (ii) increasing the injection volume up to 50 μl, and (iii) decreasing the desorption volume to 300 μl. The HP autosampler had to be modified to enable the automated “at-once” on-column injection of up to 50 μl of sample extract. The amount of packing material in the original cartridge had to be reduced to effect the decrease of the desorption volume. The total set-up did not require any further optimization after having set up the method once. The analytical characteristics of the organonitrogen and organophosphorus test analytes, i.e. recoveries (typically 75–105%), repeatability (2–8%) and linearity (0.09–3.0 μg/l) were satisfactory. The potential of the system was demonstrated by determining triazines and organophosphorus pesticides in river Rhine water at the 0.6 μg/l level using flame-ionization and mass-selective detection. No practical problems were observed during the analysis of more than 100 river water samples.     

Flow injection analysis of imidacloprid in natural waters and agricultural matrixes by photochemical dissociation, chemical reduction, and nitric oxide chemiluminescence detection

A flow injection analysis (FIA) to quantify imidacloprid was developed based upon (1) ultraviolet (254 nm) photochemical dissociation of imidacloprid to produce nitrite, (2) chemical reduction of the nitrite to nitric oxide by iodide in acid, (3) removal of gas-phase nitric oxide from the aqueous stream using a membrane separator, and (4) detection of the nitric oxide by chemiluminescent reaction with ozone. The cross-reactivity of imidacloprid with eight metabolites of imidacloprid was determined using a commercial ELISA kit and the FIA method. While the ELISA kit demonstrated varying degrees of cross-reactivity, cross-reactivity in the FIA method was observed for only the N-nitro and N-nitroso metabolites. The optimized analytical FIA method, FIA provides a linear response in imidacloprid concentration over four orders of magnitude, has a limit of detection of 5.6 pmol (1.5 ng) of imidacloprid, and exhibits an inter-day precision of 0.4%. Spike-recoveries by FIA demonstrated excellent recovery of imidacloprid in natural waters, hemlock xylem fluid, honey, and grapes with little to no interference from the matrix.     

Multisyringe flow injection system for solid-phase extraction coupled to liquid chromatography using monolithic column for screening of phenolic pollutants

In this work a fast, automatic solid-phase extraction procedure hyphenated to HPLC-UV is proposed for screening of priority phenolic pollutants in waters at ng mL⁻¹ levels. A flow through column, containing polystyrene-divinylbenzene sorbent, was incorporated to a multisyringe flow injection system (MSFIA), where the sample loading and analyte elution were carried out after computer control. The MSFIA system also directed the eluent to fill the injection loop of the chromatograph, coupling the sample preparation to its determination. High enrichment factors were attained for phenol and ten of its derivatives (mean value 176 for 50 mL of sample), with LOD values lower than 1 ng mL⁻¹ for the maximum volume of sample used (100 mL). For all analytes, mean recoveries between 89 and 103% were obtained for different water matrices. Certified reference material and a contaminated soil (RTC-CRM 112) were also tested successfully. The determination frequency was 4-10 h⁻¹, providing an automatic, fast and reliable tool for water quality and environmental monitoring.     

Large-volume PTV injection: Comparison of direct water injection and in-vial extraction for GC analysis of triazines

Summary The potential of large-volume PTV injection was studied for the analysis of triazine herbicides in water samples. Direct water injection and in-vial extraction were described and compared. Detection limits were between 0.01–0.02 μg L⁻¹ and relative standard deviations were <9%. Both methods are suitable for the analysis of triazines at ppt-level, although in-vial extraction is favourable for water samples with relatively large amounts of matrix components.     

Method of analysis of a selected group of pyrethroids in soil samples using off-line flow-through extraction and on-column direct large-volume injection in reversed phase high performance liquid chromatography

An analytical method using flow-through extraction of a soil sample filled in a short HPLC column with methanol or methanol-water mixtures and large-volume injection in RP-HPLC has been developed for the simultaneous determination of residues of three pyrethroids--kadethrin, cypermethrin, and permethrin--from soil samples. The developed RP-HPLC method enables separation of four diastereoisomers of cypermethrin into three peaks and resolution of two diastereoisomers of permethrin. The UV photometric detection limits of direct on-column large-volume injection of 1.00 mL of extract were 30 ng/mL of kadethrin, 37 ng/mL of total content of cypermethrin, and 65 ng/mL of trans-permethrin, which corresponds to a pyrethroid soil content of around 0.3 mg/kg. Effects of extractant flow rate and optimal extractant volume on the percentage recovery of pyrethroids from Slovak soil samples were studied. Recovery studies were performed at 0.5- 5.0 microg/g fortification level of kadethrin and 1.0-2.5 microg/g fortification level of cypermethrin and permethrin in a soil sample. Recoveries ranged from 83 to 90% for kadethrin, from 87 to 94% for total cypermethrin, and from 85 to 98% for trans-permethrin. This work comprises a basic study aimed at elaboration of an RP-HPLC method of direct analysis of pyrethroids in a soil matrix at low concentration levels achieved by a "solid sample injection" in HPLC--on-line interfacing of analyte extraction, extract clean-up, and analysis.     

A Cu/Nafion/Bi electrode for on-site monitoring of trace heavy metals in natural waters using anodic stripping voltammetry: An alternative to mercury-based electrodes

Stripping analysis has been widely recognised as a powerful tool for trace metal analysis. Its remarkable sensitivity is attributed to the combination of a preconcentration step coupled with differential measurements that generate an extremely favourable signal-to-noise ratio. Mercury electrodes have been traditionally employed for achieving high reproducibility and sensitivity of the stripping technique. However, because of the toxicity of mercury, new alternative electrode materials are highly desired, particularly for on-site environmental monitoring of trace pollutants. Bismuth is an electrode material characterized by its low toxicity and its ability to form alloys with some metals of interest like cadmium, lead or zinc, allowing their preconcentration at the electrode surface. We present here the preparation of Cu/Nafion/Bi electrodes and their application to heavy metal analysis by anodic stripping voltammetry. First, the main limitations of the basic Cu/Bi electrode for on-site monitoring in natural waters are highlighted. Then the modification of the Cu/Bi electrode by a Nafion membrane is presented. The analytical performances of this new electrode for trace cadmium and lead analysis were evaluated in non-deaerated solutions. Linear calibration curves were obtained in synthetic solutions for concentrations ranging from 2 to 12 and 2 to 18 μg L⁻¹ for cadmium and lead, respectively, with relative standard deviations lower than 5% (n = 15). The analytical methodology was then successfully applied to monitor the Cd²⁺ and Pb²⁺ content in real samples such as ground water and aquatic plant extracts. The results favourably compared to those obtained using a mercury drop electrode and were validated by ICP-MS.     

A dual preconcentration method by combining micro matrix solid-phase dispersion extraction with field-enhanced sample injection and micelle to cyclodextrin stacking for sensitive analysis of neutral coumarins

A rapid, sensitive, environmental friendly dual preconcentration method by combining micro matrix solid-phase dispersion extraction with field-enhanced sample injection and micelle to cyclodextrin stacking has been developed for the determination of furocoumarins. Molecular sieve, KIT-6, was used as an adsorbent in micro matrix solid-phase dispersion process. The important parameters affecting off-line and online CE preconcentration efficiency were optimized. Under the optimal experimental conditions, all analytes showed good linearity (R² > 0.999). The LODs of notopterol, isoimperatorin, and imperatorin were 0.1 μg/mL, 1.2 mg/kg, and 1.0 mg/kg, respectively. Compared with the normal CE method, the enrichment times were up to 300. Moreover, Angelicae Dahuricae Radix was used as the mode of complex solid sample matrix to demonstrate the prospect of application of this methodology. The results showed the proposed strategy is promising for determining trace furocoumarins in complex matrix samples, which might be applied as a powerful and economic tool in monitoring illegal cosmetic adding.     

Method of fast trace microanalysis of the chiral pesticides epoxiconazole and novaluron in soil samples using off-line flow-through extraction and on-column direct large volume injection in reversed-phase high performance liquid chromatography

An analytical method combining off-line flow-through extraction of a soil micro-sample (mass around 100 mg, packed into a short HPLC glass column) and direct on-column large-volume injection (LVI up to 1.00 mL) of a methanol-water soil extract onto a conventional C18 RP HPLC column enabled fast (within 3.5 minutes) trace micro-analysis of the relatively new chiral pesticides epoxiconazole (E) and novaluron (N), respectively. Linear calibration curves were evaluated from UV detection (230 nm) data in the range from 0.1 to 5 mg/kg in three most abundant Slovak agricultural soils. LOD (confidence band) at the levels 0.08-0.11 mg/kg and LOQ 0.4-0.6 mg/kg and LOD (S/N = 3) at the levels 0.007-0.018 mg/kg and LOQ (S/N = 10) 0.024-0.060 mg/kg, respectively, of dry soil were achieved. Recovery of pesticides in the overall LVI method including flow-through 130-200 mg soil micro-sample extraction was: for epoxiconazole from 74 to 85% and from 56% to 90% for novaluron with reproducibility within +/- 6% RSD. This fast (30 min) and simple method consists of just three steps which are short column filling with a solid micro-sample; flow-through liquid extraction and direct large-volume injection RP HPLC DAD analysis. The method is prepared for automation and further analysis of enantiomers of both investigated pesticides by achiral-chiral column switching techniques.     

Oxidized multi-walled carbon nanotubes for the dispersive solid-phase extraction of quinolone antibiotics from water samples using capillary electrophoresis and large volume sample stacking with polarity switching

In this work, a new method for the determination of eleven quinolone antibiotics (moxifloxacin, lomefloxacin, danofloxacin, ciprofloxacin, levofloxacin, marbofloxacin, enrofloxacin, difloxacin, pefloxacin, oxolinic acid and flumequine) in different water samples using dispersive solid-phase extraction (dSPE) and capillary zone electrophoresis with diode-array detection was developed. Oxidized multi-walled carbon nanotubes (o-MWCNTs) were used for the first time as stationary phases for the off-line preconcentration by dSPE of the antibiotics. A 65 mM phosphate buffer at pH 8.5 was found adequate for analyte separation while large volume sample stacking with polarity switching of the analytes dissolved in water containing 10% (v/v) of acetonitrile was carried out in order to improve the sensitivity. dSPE parameters, such as sample volume and pH, o-MWCNT amount, volume and type of eluent in dSPE were optimized. Application of the developed method to the analysis of spiked Milli-Q, mineral, tap, and wastewater samples resulted in good recoveries values ranging from 62.3 to 116% with relative standard deviation values lower than 7.7% in all cases. Limits of detection were in the range of 28-94 ng/L. The proposed method is very fast, simple, repeatable, accurate and highly selective.     

Comparison of soluble manganese(IV) and acidic potassium permanganate chemiluminescence detection using flow injection and sequential injection analysis for the determination of ascorbic acid in Vitamin C tablets

The limits of detection (3s) for ascorbic acid were 5×10⁻⁸ M with acidic potassium permanganate using both flow injection analysis (FIA) and sequential injection analysis (SIA) whereas the soluble manganese(IV) afforded 1×10⁻⁸ M and 5×10⁻⁹ M for FIA and SIA, respectively. Determinations of ascorbic acid in Vitamin C tablets were achieved with minimal sample pretreatment using a standard additions calibration and gave good agreement with those of iodimetric titration.