Enhanced Sensitive Electrochemical Sensor for Simultaneous Catechol and Hydroquinone Detection by Using Ultrasmall Ternary Pt-based Nanomaterial

The simple and effective method for the novel synthesis of Pt-based nanoparticle was presented with high efficiency. The sensitive catalyst for the simultaneous detection of catechol and hydroquinone was prepared by depositing ternary metal complex on fluorine-doped tin-oxide (FTO). The composition and morphology of nanomaterials were characterized by TEM, HRTEM, XRD, XPS, and EDS (energy dispersive spectroscopy). The size of the Pt-based nanomaterial was about 5±1 nm. The electrochemical performance of the modified catalyst was studied by CV, DPV, and EIS. The modified PtNiCu@FTO catalyst possessed good electro-oxidation activity for hydroquinone and catechol and used for simultaneous detection of catechol and hydroquinone at scan rate of 20 mV s⁻¹ (vs. Ag/AgCl). Detection responses were found in the ranges of 5–2900 μM for hydroquinone and 5–3000 μM for catechol. The detection limits (LOD) for HQ and CC were observed as 0.35 and 0.29 μM, respectively. The sensitivity of HQ and CC were 1515.55 and 1485 μA mM⁻¹ cm⁻², respectively. The prepared nanomaterial were effectively applied for the determination of CC and HQ in real samples.     

Development and optimization of a solid composite tyrosinase biosensor for phenol detection in flow injection systems

Bulk-modified epoxy-graphite tyrosinase biosensors were fabricated by four different procedures. The influence of these fabrication procedures on the analytical performance of the enzyme electrode in an amperometric wall-jet flow cell has been studied. The bioprobe performance is assessed by cyclic voltammetry. Higher current densities and narrower peaks were obtained when the enzyme was introduced in the dry state into the epoxy-graphite material, instead of introducing it previously dissolved in the buffer. In the F1 system responses of 11.79 μA cm⁻² and 1.43 μA cm⁻² are then obtained for catechol and phenol respectively for 50 μL injections of 20 μM solutions. Moreover, if gold/palladium is introduced into the epoxy-graphite, a further increase in current is achieved resulting in 27.70μA cm⁻² and 4.90μA cm⁻²for catechol and phenol, respectively. This biosensor can operate in aqueous as well as in mixed aqueous-organic environments.     

Binder Free Modification of Glassy Carbon Electrode by Employing Reduced Graphene Oxide/ZnO Composite for Voltammetric Determination of Certain Nitroaromatics

Reduced Graphene oxide/ZnO nanoflowers ( rGO/ZnO‐NFs ) composite has been synthesized in‐situ using asymmetric Zn complex ( 1 ) as a single‐source molecular precursor (SSMP) with GO at 150 °C. The rGO/ZnO‐NFs composite was characterized by PXRD, UV‐vis, SEM, EDX mapping, TEM and SAED pattern to confirm its purity and morphology. The rGO/ZnO‐NFs composite shows uniform distribution of nanoflowers on graphene sheets. The modified glassy carbon electrode ( GCE ) was fabricated by drop wise layering of the rGO/ZnO‐NFs composite at the surface of the GCE without using binder. The binder free modified electrode ( GCE‐rGO/ZnO ) was explored for detection of nitroaromatics such as p‐nitro‐phenol ( p ‐NP ), 2,4‐dinitrophenol ( 2,4‐DNP ), 2,4‐dinitrotoluene ( 2,4‐DNT ) and 2,4,6‐trinitrophenol ( 2,4,6‐TNP ). The fabricated sensor showed remarkable response for the both toxicants and explosives. The LOD, sensitivity and linear range for the studied toxicants and explosives were found to be in a good range: p ‐NP= 0.93 μM, 240 μA mM⁻¹ cm⁻² and 0.2–0.9 mM; 2,4‐DNP= 6.2 μM, 203 μA mM⁻¹ cm⁻² and 0.1–0.9 mM; 2,4‐DNT= 10 μM, 371 μA mM⁻¹ cm⁻² and 0.2–0.9 mM; 2,4,6‐TNP= 16 μM, 514 μA mM⁻¹ cm⁻² and 0.2–0.9 mM, respectively.     

Simultaneous Determination of Catechol and Hydroquinone on Nano-Co/L-Cysteine Modified Glassy Carbon Electrode

In this study, a novel and highly sensitive electrochemical method for simultaneous determination of catechol (CC) and hydroquinone (HQ) was developed, which worked at GCE modified with Nano cobalt (Nano-Co) by electrodeposition and L-Cysteine by electrochemical polymerization. The Nano-Co/L-Cysteine GCE was investigated by cyclic voltammetry (CV), SEM and EIS. The excellent conditions have been selected including supporting electrolyte, pH, accumulation time and scan rate. The calibration curves of were obtained that the linear regression equation was I=0.0734c+6×10⁻⁶ in the range of 5.8 μM to 103 μM (R²=0.9942) for CC and the linear regression equation was I=0.0566c+5×10⁻⁶ in the range of 5.8 μM to 100 μM (R²=0.9967) for HQ. The obtained detection limits of CC and HQ both were 6×10⁻⁷ M. The modified electrode was successfully applied to the simultaneous determination of CC and HQ in water samples.     

Simultaneous Determination of Hydroquinone and Catechol by Differential Alternative Pulses Voltammetry

The second order voltammetric technique of high resolution, Differential Alternative Pulses Voltammetry (DAPV), was applied for the simultaneous determination of hydroquinone (HQ) and catechol (CC) on bare spectroscopic graphite electrode. Well resolved anodic and cathodic peaks situated on both sides of the zero line were obtained, while the differential pulse voltammograms were overlapped. The linear concentration range for HQ and CC quantification by DAPV was extended up to 20 μmol L⁻¹ for both the isomers. The sensitivity of the determination was found to be 6.00 μA L μmol⁻¹ and 3.61 μA L μmol⁻¹, while the limit of detection reached was 0.2 μmol L⁻¹ and 0.5 μmol L⁻¹ for HQ and CC, respectively. No interference was observed from the commonly coexisting organic species such as resorcinol, phenol and p‐benzoquinone. The great resolution power of DAPV permitted obtaining excellent results without any electrode modification and any mathematical data processing.     

Sensitive Electrochemical Determination of Trifluralin at a Disposable Pencil Graphite Electrode

A sensitive differential pulse (DP) voltammetric method has been proposed for the determination of trifluralin (TFA) based on both its reduction and oxidation at a disposable pencil graphite electrode (PGE). DP voltammograms recorded under optimized conditions show that oxidation and reduction peak currents increased linearly in the range from 1.0 to 75.0 μM and from 0.50 to 100.0 μM TFA, respectively. LOD and sensitivity values have been determined as 0.39 μM and 11170 μA mM⁻¹ cm⁻² for oxidation and as 0.20 μM and 22167 μA mM⁻¹ cm⁻² for reduction. The acceptable recovery values (95.2–104.8 %) were obtained from real water samples.     

Special Pore-Space-Partition CoFePBA Hollow Framework Realizing High-Performance Glucose Sensing

In this work for the first time pore-space-partition (PSP)-CoFePBA hollow framework is elaborately designed and successfully obtained via self-template internal dissolution strategy. As is demonstrated by our previous report, Prussian blue analogue (PBA) with hollow morphology is very beneficial to improve sensing performance. As expected, the PSP-CoFePBA hollow framework in this work exhibits far superior glucose sensing performance compared with classic CoFePBA nanoparticles and nanoboxes as well as most of reported PBA-based glucose sensors. Herein, very high sensitivity of 1184.18 μA mM⁻¹ cm⁻² and 267.63 μA mM⁻¹ cm⁻² in the concentration range of 5–325 μM and 325–1025 μM, respectively, as well as low detection limit of 0.4 μM (S/N=3) and high stability can be observed. In a word, this work proposes and develops a simple and general synthetic strategy for constructing PBA-based hollow material, that will be very helpful in this field.     

Electrochemical Sensing Platform Based on Lotus Stem-derived Porous Carbon for the Simultaneous Determination of Hydroquinone,Catechol and Nitrite

A simple and highly selective electrochemical sensor based on carbonized lotus stem (CLS) was developed for the simultaneous determination of hydroquinone (HQ), catechol (CC), and nitrite (NT) by using cyclic voltammetry (CV) and amperometry (AMP) methods. The CLS was characterized by the methods including field emission scanning electron microscopy (FE-SEM), Raman spectrum, FT-IR spectrum and X-ray diffraction (XRD). Brunauer-Emmett-Teller (BET) method was used to evaluate the pore structure and surface area of CLS. The oxidation peaks for HQ (116.2 mV), CC (220.1 mV), and NT (818.9 mV) were well separated under optimized conditions, which improved their simultaneous determination. The CLS modified electrode showed a good linear range between 1.0×10 ⁻⁶ to 7.0×10 ⁻⁴ M for HQ, and the detection limit was calculated as 0.15 μM. For CC the linear relationship was 1.0×10 ⁻⁶ to 3.0×10 ⁻³ M with the detection limit of 0.11 μM. For NT the linear relationship was 5.0×10 ⁻⁷ to 4.0×10 ⁻³ M with the detection limit of 0.09 μM. The results indicated that the intrinsic structure of natural biomass can be expected to design porous carbon for electrochemical sensors.     

Simultaneous Determination of Hydroquinone and Catechol at a Glassy Carbon Electrode Modified with Multiwall Carbon Nanotubes

A simply and high selectively electrochemical method for simultaneous determination of hydroquinone and catechol has been developed at a glassy carbon electrode modified with multiwall carbon nanotubes (MWNT). It was found that the oxidation peak separation of hydroquinone and catechol and the oxidation currents of hydroquinone and catechol greatly increase at MWNT modified electrode in 0.20 M acetate buffer solution (pH 4.5). The oxidation peaks of hydroquinone and catechol merge into a large peak of 302 mV (vs. Ag/AgCl, 3 M NaCl) at bare glassy carbon electrode. The two corresponding well‐defined oxidation peaks of hydroquinone in the presence of catechol at MWNT modified electrode occur at 264 mV and 162 mV, respectively. Under the optimized condition, the oxidation peak current of hydroquinone is linear over a range from 1.0×10^?6 M to 1.0×10^?4 M hydroquinone in the presence of 1.0×10^?4 M catechol with the detection limit of 7.5×10^?7 M and the oxidation peak current of catechol is linear over a range from 6.0×10^?7 M to 1.0×10^?4 M catechol in the presence of 1.0×10^?4 M hydroquinone with the detection limit of 2.0×10^?7 M. The proposed method has been applied to simultaneous determination of hydroquinone and catechol in a water sample with simplicity and high selectivity.     

Construction of amperometric biosensor modified with conducting polymer/carbon dots for the analysis of catechol

Phenolic compounds used in food industries and pesticide industry, are environmentally toxic and pollute the rivers and ground water. For that reason, detection of phenolic compounds such as catechol by using simple, efficient and cost-effective devices have been becoming increasingly popular. In this study, a suitable and a novel matrix was composed using a novel conjugated polymer, namely poly[1-(5-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophen-2-yl)furan-2-yl)-5-(2-ethylhexyl)-3-(furan-2-yl)-4H thieno[3,4-c]pyrrole-4,6(5H)-dione] (PFTBDT) and carbon dots (CDs) to detect catechol. PFTBDT and CDs were synthesized and the optoelectronic properties of PFTBDT were investigated via electrochemical and spectroelectrochemical studies. Laccase enzyme was immobilized onto the constructed film matrix on the graphite electrode. The proposed biosensor was found to have a low detection limit (1.23 μM) and a high sensitivity (737.44 μA/mM.cm⁻²) with a linear range of 1.25–175 μM. Finally, the applicability of the proposed enzymatic biosensor was evaluated in a tap water sample and a satisfactory recovery (96–104%) was obtained for catechol determination.     

On-Line Sensitive Chemiluminescence Detection of Trace Amounts of Polyphenols Using MEKC

A high–performance capillary electrophoresis with chemiluminescence detection (CE–CL) method has been developed for the determination of three polyphenols (catechol, hydroquinone and pyrogallol) in this work. The effects of several factors such as the acidity and concentration of running buffer, the applied voltage, the injection time, the pH and concentration of CL reagents were investigated in detail. Under the optimum conditions, the baseline separation of three polyphenols was obtained within 6 min. Detection limit (S/N = 3) was 1.0 × 10^?10 M for catechol, 1.0 × 10^?9 M for hydroquinone and 3.0 × 10 ^?11 M for pyrogallol, respectively. The excellent detection limits of the analytes were 1–5 order lower than that of methods reported in literatures.     

Fullerene Black Modified Screen Printed Electrodes for the Quantification of Acetaminophen and Guanine

Fullerene Black (FB) and Extracted Fullerene Black (EFB) were used in modified screen‐printed electrodes producing electrochemical transducers (FB‐SPEs and EFB‐SPEs). A complete electrochemical study was performed and the best results are obtained working with FB‐SPEs, especially in terms of: 1. improved electron‐transfer kinetic mechanisms and 2. sensitivity and selectivity toward Acetaminophen (Ac) and Guanine (G). These latter represent two important electro‐active targets to quantify in medicine field application, because: Ac is a preferred alternative (as analgesic‐antipyretic agent) to aspirin, particularly for patients who cannot tolerate aspirin; the oxidation signal of G is useful for the fabrication of emerging analytical tools, such as DNA chipsand user‐friendly diagnostic devices. Ac and G are quantify by using FB‐SPEs electrochemical devices, with an extended linearity (1–300 μM for Ac; 0.1–300 μM for G), an excellent sensitivity (2.82 μA μM⁻¹ cm⁻² in the case of Ac; and 0.183 μA μM⁻¹ cm⁻² in the case of G), a low detection limit (0.01 μM for Ac; 0.005 μM for G), a very good reproducibility (both: intra‐; inter‐electrodes reproducibility RSD % ranging from 0.3–0.5 for Ac; and 0.50–0.85 for G) and a very fast response time (6 s for Ac; 5 s in the case of G). In addition, high selectivity is obtained at FB‐SPEs, meaning that the FB‐SPEs electrochemical transducers are suitable to simultaneously quantify Ac and G in real samples, having several different (highly concentrated) interference.     

Self‐powered Photoelectrochemical Sensor for Gallic Acid Exploiting a CdSe/ZnS Core‐shell Quantum Dot Sensitized TiO2 as Photoanode

Herein is described the development of a self‐powered sensor for gallic acid (GA) determination exploiting CdSe/ZnS quantum dot sensitized TiO₂ nanoparticles (CdSe/ZnS/TiO₂/FTO) as photoanode and an all copper oxide photocathode (CuO/Cu₂O/FTO) to reduce water. A two‐chamber self‐powered photoelectrochemical cell was employed in order to maintain separated the photoelectrodes. The self‐powered photoelectrochemical cell is based on water reduction in the cathodic chamber while gallic acid acts as a hole scavenger in the anodic chamber to generate the necessary cell output to drive GA oxidation in the anodic compartment. Electrochemical impedance measurements were performed to evaluate the electronic characteristics of CdSe/ZnS/TiO₂/FTO photoanode and CuO/Cu₂O/FTO photocathode in terms of flat band potential, carrier density, and nature of semiconductor. Under optimized conditions, the self‐powered photoelectrochemical cell presented a wide linear response range for GA from 1 μmol L⁻¹ up to 200 μmol L⁻¹.     

An Enzyme-free Electrochemical H2O2 Sensor Based on a Nickel Metal-organic Framework Nanosheet Array

In this work, we reported the development of a nickel metal-organic framework nanosheet array on Ti-mesh (Ni-MOF/TM) as an enzyme-free electrochemical sensing platform for H₂O₂ determination. The as-obtained sensor exhibited outstanding detection properties of H₂O₂, which might be gifted from the large specific surface area, abundant active sites of Ni-MOF nanoarrays. The sensor displayed a good linear range (0.8 μM–4.6×10³ μM), a detection limit as low as 0.26 μM, a high sensitivity (307.5 μA mM⁻¹ cm⁻²), and a rapid response. Moreover, this enzyme-free sensor is promising for point-of-care (POC) testing of H₂O₂ in human serum attribute to the excellent performance of Ni-MOF and the simple preparation process of the sensor.     

Amperometric Biosensor for Hydrogen Peroxide,Using Supramolecularly Immobilized Horseradish Peroxidase on the β‐Cyclodextrin‐Coated Gold Electrode

Horseradish peroxidase, previously modified with 1‐adamantane moieties, was supramolecularly immobilized on gold electrodes coated with perthiolated β‐cyclodextrin. The functionalized electrode was employed for the construction of an amperometric biosensor device for hydrogen peroxide using 1 mM hydroquinone as electrochemical mediator. The biosensor exhibited a fast amperometric response (6 s) and a good linear response toward H₂O₂ concentration between 12 μM and 450 μM. The biosensor showed a sensitivity of 1.02 mA/M cm², and a very low detection limit of 5 μM. The electrode retained 97% of its initial electrocatalytic activity after 30 days of storage at 4 ⁰C in 50 mM sodium phosphate buffer, pH 7.0.     

The Rapid and Practical Route to Cu@PCR Sensor: Modification of Copper Nanoparticles Upon Conducting Polymer for a Sensitive Non-Enzymatic Glucose Sensor

In this work, rapid, sensitive, practical, and economical strategy for non-enzymatic glucose sensor has been reported based on a modification of copper nanoparticles upon conducting polymer with high surface area (Cu@PCR). Firstly, PCR conducting polymer electrode (PCR) has been successfully fabricated by electrochemical polymerization of a specially synthesized and characterized star-shaped carbazole derivative. Then copper nanoparticles have been successfully electrodeposited on the PCR as a practical method with cyclic voltammetry. The morphologies of the synthesized materials have been characterized by scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) measurements. The Cu@PCR sensor platform has been displayed a synergistic effect of high catalytical properties of copper nanoparticles and high electroactive properties of PCR towards the glucose oxidation in alkaline medium. The Cu@PCR sensor platform has shown high sensitivity of 847 μAmM⁻¹cm⁻², good stability (10 weeks), a low detection limit of 0.043 μM, and a fast response of 3 s for the non-enzymatic electrochemical detection of glucose. This organic−inorganic hybrid composite sensor is a promising candidate for the fabrication of a highly sensitive and rapid glucose-sensing with the simple preparation procedure and use of a low-cost precursor.     

Electro Catalytic Properties of α, β, γ, ϵ ‐ MnO2 and γ ‐ MnOOH Nanoparticles: Role of Polymorphs on Enzyme Free H2O2 Sensing

Polymorphs of Manganese di oxide (MnO₂) such as alpha (α), beta (β), gamma (γ), epsilon (ϵ), and MnOOH type materials were prepared via hydrothermal approach under different conditions. The samples were characterized by XRD, FESEM, FT‐IR, Raman and BET analysis. Cyclic voltammetry (CV) analysis confirm that α ‐ MnO₂ shows better electro‐catalytic ability. Amperometry sensing of hydrogen peroxide (H₂O₂) was carried out by varying applied potential value with the polymorphs of MnO₂. Compared with the other phases of MnO₂, α ‐ MnO₂ shows high linear range up to 20μM. The calculated sensitivity value for H₂O₂ sensing of different phases is in the order of α ‐ MnO₂, β ‐ MnO₂, ϵ ‐ MnO₂, γ ‐ MnO_2, MnOOH and found to be 0.094 mA μM⁻¹ cm⁻² > 0.072 mA μM⁻¹ cm⁻² > 0.07 mA μM⁻¹ cm⁻² > 0.03 mA μM⁻¹ cm⁻² > 0.01 mA μM⁻¹ cm⁻² respectively. All the characterization results reveal that crystalline phase plays a vital role in electrochemical behavior rather than crystalline size, morphology, surface charge, surface area.     

Photoelectrochemical Sensor for Isoniazid: Application in Drugs Used in the Treatment of Tuberculosis

The present work describes the development of a photoelectrochemical sensor based on titanium dioxide, cadmium telluride quantum dots and the tris (2,2′-bipyridyl) ruthenium(II) chloride complex for detection of Isoniazid (INH). The Ru(bpy)₃²⁺/CdTe-QDs/TiO₂/FTO photoelectrochemical platform was characterized by scanning electrochemical microscopy, electrochemical impedance spectroscopy and amperometry. The photoelectrochemical sensor presented two linear ranges for INH concentrations ranging from 0.5 to 150 μmol L⁻¹ and 150 to 1270 μmol L⁻¹, with a theoretical detection limit of 0.02 μmol L⁻¹. The sensor was successfully applied for the determination of INH in drugs samples used in the treatment of tuberculosis.     

Copper‐based Metal‐organic Framework Applied in the Development of an Electrochemical Biomimetic Sensor for Catechol Determination

In this study, the synthesis and characterization of a Cu‐based metal‐organic framework (MOF) [Cu₃(BTC)₂(H₂O)₃]_n (where BTC=benzene‐1,3,5‐tricarboxylate), known as HKUST‐1, were performed. The Cu‐MOF was applied in the modification of a carbon paste to obtain a biomimetic sensor for the electrochemical determination of catechol. Kinetic assays confirmed that the Cu‐MOF acts as a catalyst for the oxidation of catechol and it can be considered as a catechol oxidase mimetic. Under optimized conditions, the calibration curve for catechol presented a linear range of 8.0×10⁻⁷ to 3.2×10⁻⁵ mol L⁻¹, with detection limit of=1.0×10⁻⁷ mol L⁻¹. The sensor demonstrated good intra‐day repeatability and inter‐electrode reproducibility (relative standard deviations of 3.8 % (n=10) and 4.3 % (n=6), respectively). In the selectivity study, an adequate peak‐to‐peak separation was observed for hydroquinone and uric acid in relation to catechol, demonstrating that this sensor has the potential for use in the simultaneous determination of these compounds. This sensor was successfully applied in the determination of catechol in water samples.     

Non‐enzymatic Fructose Sensor Based on Co3O4 Thin Film

In this study, we report on the selective of fructose on Co₃O₄ thin film electrode surface. A facile chemical solution deposition technique was used to fabricate Co₃O₄ thin film on fluorine doped tin oxide, FTO, glass. Electrode characterization was done using XRD, HRTEM, SEM, AFM, and EIS. The constructed sensor exhibited two distinctive linear ranges (0.021–1.74 mM; 1.74–∼15 mM) covering a wide linear range of up to ∼15 mM at an applied potential of +0.6 V vs Ag/AgCl in 0.1 M NaOH solution. The sensor demonstrated high, reproducible and repeatable (R.S.D of <5 %) sensitivity of 495 (lower concentration range) & 53 (higher concentration range) μA cm⁻² mM⁻¹. The sensor produced a low detection limit of ∼1.7 μM (S/N =3). The electrode was characterised by a fast response time of <6 s and long term stability. The repeatability and stability of the electrode resulted from the chemical stability of Co₃O₄ thin film. The sensor was highly selective towards fructose compared to the presence of other key interferences i. e. AA, AC, UA. The ease of the electrode fabrication coupled with good electrochemical activity makes Co₃O₄ thin film, a promising candidate for non‐enzymatic fructose detection.