Interlaboratory method validation of capillary electrophoresis sodium dodecyl sulfate (CE-SDS) methodology for analysis of mAbs

Capillary electrophoresis sodium dodecyl sulfate (CE-SDS) is an analytical method to assess the purity of proteins, commonly applied to monoclonal antibodies (mAbs) in the biopharmaceutical industry. To address the need to standardize the CE-SDS method in the pharmaceutical industry and to enhance the confidence in method transfer between laboratories operating different commercial capillary electrophoresis (CE) instrument platforms, an interlaboratory CE-SDS method validation was organized involving 13 laboratories in 13 companies on four different types of commercial capillary electrophoresis instruments. In the validation, a commercial mAb therapeutic was used as the sample. The validation process followed the analytical guidelines set by the ICH guidelines (International Conference for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use). The method's precision, accuracy, linearity and range, and limit of quantitation (LOQ) were validated in the study. Variations of all the parameters validated in the study passed the pre-set criteria defined at the beginning of the study. The definition was based on previously published works and the intended application purpose of the CE-SDS method for mAbs. The study proved that the CE-SDS method fits its intended application purpose as a size impurity assay and size heterogeneity characterization assay for mAb therapeutic products. This study is the first time a CE-SDS method is validated by multiple laboratories using different commercial CE instrument platforms and on a commercial mAb therapeutic. Its results will enhance the confidence of the biopharmaceutical industry to develop CE-SDS methods and transfer CE-SDS methods between different laboratories.     

Complementary middle‐down and intact monoclonal antibody proteoform characterization by capillary zone electrophoresis – mass spectrometry

High‐resolution capillary zone electrophoresis – mass spectrometry (CZE‐MS) has been of increasing interest for the analysis of biopharmaceuticals. In this work, a combination of middle‐down and intact CZE‐MS analyses has been implemented for the characterization of a biotherapeutic monoclonal antibody (mAb) with a variety of post‐translational modifications (PTMs) and glycosylation structures. Middle‐down and intact CZE separations were performed in an acidified methanol‐water background electrolyte on a capillary with a positively charged coating (M7C4I) coupled to an Orbitrap mass spectrometer using a commercial sheathless interface (CESI). Middle‐down analysis of the IdeS‐digested mAb provided characterization of PTMs of digestion fragments. High resolution CZE enabled separation of charge variants corresponding to 2X‐deamidated, 1X‐deamidated, and non‐deamidated forms at baseline resolution. In the course of the middle‐down CZE‐MS analysis, separation of glycoforms of the F_C/2 fragment was accomplished due to hydrodynamic volume differences. Several identified PTMs were confirmed by CZE‐MS². Incorporation of TCEP‐HCl reducing agent in the sample solvent resulted in successful analysis of reduced forms without the need for alkylation. CZE‐MS studies on the intact mAb under denaturing conditions enabled baseline separation of the 2X‐glycosylated, 1X‐glycosylated, and aglycosylated populations as a result of hydrodynamic volume differences. The presence of a trace quantity of dissociated light chain was also detected in the intact protein analysis. Characterization of the mAb under native conditions verified identifications achieved via intact analysis and allowed for quantitative confirmation of proteoforms. Analysis of mAbs using CZE‐MS represents a complementary approach to the more conventional liquid‐chromatography – mass spectrometry‐based approaches.     

Large Volume Sample Stacking (LVSS) in Capillary Electrophoresis (CE) with Response Surface Methodology (RSM) for the Determination of Phenolics in Food Samples

Abstract

A capillary electrophoresis method with large volume sample stacking (CE-LVSS) has been developed and validated for the simultaneous determination of seven phenolic compounds: naringin, rutin, carnosic acid, apigenin, quercetin, morin, and chichoric acid. Optimization was carried out by response surface methodology and a set of 20 experiments helped to optimize the parameters such as the concentration of buffer, buffer pH, and applied voltage. Analytes were separated using a 50?µm diameter capillary with 56?cm effective length and an extended light path using 20?mM borate buffer at pH 9.2. The LVSS method was optimized and a three- to fivefold improvement in detectability was achieved with injection at 100 mbar for 20?s followed by polarity switching at –20?kV for 6?s. The linearity values of all seven analytes were observed in the concentration ranges from 0.5 to 50?µg/mL for CE and 0.1 to 25?µg/mL for LVSS. The limits of detection were from 0.012 to 0.241 and 0.003 to 0.086?µg/mL for CE and LVSS. The obtained limits of quantitation were within 0.041 to 0.802 for CE and 0.012 to 0.286?µg/mL for LVSS. The recoveries were between 91.1 and 109.8% and 96.3 and 108.4% for CE and LVSS, respectively. The developed method has been successfully applied for the quantitative determination of analyzed components from food samples that are important sources of these compounds.     

Volume expansion and loss of sample due to initial self-heating in capillary electroseparation (CES) systems

Summary The application of a high voltage, V, in capillary electroseparations following sample injection, can cause loss of analyte if the rate of thermal expansion of the liquid in the capillary (due to ohmic heating) is more rapid than the rate of electro-migration of the slowest moving analyte into the column. We show that the limiting condition for avoidance of this undesirable effect requires that the ramp-up rate for the applied voltage is below a critical value. This critical (maximum) value is given to a good approximation by a simple formula (Eq. (30)). Limiting values of dV/dt are in the region of 1000 V s^–1 when the power loss in the capillary is around 3 W m^–1 (e.g. with a field of 30,000 V m^–1 and a current of 100 A). A detailed mathematical analysis which takes full account of the thermal dependence of key variables, indicates that thermal explosion will occur at fields above a critical value (Eq. (21)). We recommend that commercial CES instrumentation incorporates manual or software led ramp-up voltage control.     

毛细管电泳柱端安培检测装置的研制

研制了一种新型的毛细管电泳柱端型安培检测装置。以直径为6μm的碳纤维微电极为工作电极,在自组装的ACS-2000毛细管电泳仪上,考察了用不同内径毛细管分离时分离电压对背景噪声的影响。利用该装置同时测定了3种苯二酚的异构体。     

CE Determination of 2-(9-Carbazole)ethyl Chloroformate-Labeled Oligopeptides

A pre-column derivatization method for sensitive determination of oligopeptides, using the tagging reagent 2-(9-carbazole)ethyl chloroformate (CEOC-Cl) followed by capillary electrophoresis (CE) with diode-array detection, has been developed. Maximum yield close to 100% were observed when a three to fourfold molar excess of reagent was used at pH 9.0–10.0. Excess reagent was extracted with n-hexane–ethyl acetate 9:1–10:1 (v/v); this enabled direct analysis using CE with no significant disturbance from the major fluorescent reagent degradation by-products. The effects on the results of buffer pH and of SDS and organic modifier concentrations were examined. Good baseline resolution in the separation of five CEOC-peptides was achieved with a 48.5-cm total length (effective length 40 cm) 50-μm inner diameter capillary column.     

Double‐layer poly(vinyl alcohol)‐coated capillary for highly sensitive and stable capillary electrophoresis and capillary electrophoresis with mass spectrometry glycan analysis

Glycosylation plays an important role in protein conformations and functions as well as many biological activities. Capillary electrophoresis combined with various detection methods provided remarkable developments for high‐sensitivity glycan profiling. The coating of the capillary is needed for highly polar molecules from complex biosamples. A poly(vinyl alcohol)‐coated capillary is commonly utilized in the capillary electrophoresis separation of saccharides sample due to the high‐hydrophilicity properties. A modified facile coating workflow was carried out to acquire a novel multiple‐layer poly(vinyl alcohol)‐coated capillary for highly sensitive and stable analysis of glycans. The migration time fluctuation was used as index in the optimization of layers and a double layer was finally chosen, considering both the effects and simplicity in fabrication. With migration time relative standard deviation less than 1% and theoretical plates kept stable during 100 consecutive separations, the method was presented to be suitable for the analysis of glycosylation with wide linear dynamic range and good reproducibility. The glycan profiling of enzymatically released N‐glycans from human serum was obtained by the presented capillary electrophoresis method combined with mass spectrometry detection with acceptable results.     

Improved methods for urinary atrazine mercapturate analysis--assessment of an enzyme-linked immunosorbent assay (ELISA) and a novel liquid chromatography-mass spectrometry (LC-MS) method utilizing online solid phase extraction (SPE)

Elimination of interfering substances in urine by solid phase extraction (SPE) prior to analysis resulted in 10-fold improvement in the sensitivity of atrazine mercapturate (AM) enzyme-linked immunosorbent assay (ELISA) compared to previous reports. Of the two tested SPE systems, Oasis^® HLB and MCX, the mixed-mode MCX gave good recoveries (82%) of AM in spiked samples measured by ELISA, whereas the reverse-phase HLB phase was not compatible with the immunochemical method. At relatively high concentrations of urinary AM (>20 ng mL⁻¹), sample dilution was effective enough for the elimination of interfering substances. The new liquid chromatography-mass spectrometry (LC-MS) method developed for AM utilizes online-SPE with Oasis^® HLB, column switching and a stable-isotope internal standard. The limit of quantification (0.05 ng mL⁻¹) indicates improved sensitivity compared with most previously published LC-MS methods for AM. Validation of all three methods, LC-MS, ELISA + SPE and ELISA + dilution with spiked urine samples showed good correlation between the known and measured concentrations with R² values of 0.996, 0.957 and 0.961, respectively. When a set (n = 70 plus 12 blind duplicates) of urine samples from farmers exposed to atrazine was analyzed, there was a good agreement (R² = 0.917) between the log normalized data obtained by ELISA + SPE and LC-MS. High correlation among the data obtained by the two tested methods and the LC-MS method by the Center of Disease Control and Prevention (CDC), together with low variability among the blind duplicates, suggests that both methods reported here would be suitable for the analysis of urinary AM as a biomarker for human exposure of atrazine.     

Detection of carbohydrates using new labeling reagent 1-(2-naphthyl)-3-methyl-5-pyrazolone by capillary zone electrophoresis with absorbance (UV)

Surface plasmon resonance (SPR) was used to screen the interaction between a variety of affinity ligands and hemagglutinin (HA) from human influenza virus, with the aim of identifying low affinity ligands useful for the development of a rapid bioanalytical sensor. Three sialic acid-based structures and four lectins were evaluated as sensor ligands. The sialic acid-based ligands included a natural sialic acid-containing glycoprotein, human alpha1-acid glycoprotein (alpha1-AGP), and two synthetic 6'-sialyllactose-conjugates, with varying degree of substitution. The interaction of HA with the four lectin-based ligands, concanavalin A (Con A), wheat germ agglutinin (WGA), Maackia amurensis lectin (MAL), and Sambucus nigra agglutinin (SNA), showed a wide variation of affinity strengths. Affinity and kinetics data were estimated. Strong affinities were observed for Con A, WGA, alpha1-AGP, and a 6'-sialyllactose-conjugate with a high substitution degree, and low affinities were observed for MAL and a 6'-sialyllactose-conjugate with low substitution. The main objective, to identify a low affinity ligand which could be used for on-line monitoring and product quantification, was met by a 6'-sialyllactose-ovalbumin conjugate that had 0.6 mol ligand per mol carrier protein. The apparent affinity of this ligand was estimated to be 1.5+/-0.03 microM (K(D)) on the SPR surface. Vaccine process samples containing HA were analyzed in the range 10-100 microg HA mL(-1) and correlated with single-radial immunodiffusion. The coefficient of variation on the same chip was between 0.010 and 0.091.     

Design of experiments as a valuable tool for biopharmaceutical analysis with (imaged) capillary isoelectric focusing

Capillary isoelectric focusing is indispensable for characterizing charge heterogeneity and isoelectric points of biopharmaceuticals. However, there are many influencing parameters and therefore method development is challenging. This study was performed to obtain an in‐depth understanding of the imaged CIEF methodology by applying a design of experiments approach. To describe the parameter's effects as objectively as possible, a polynomial regression model was derived for the most important responses. For this purpose, the reference monoclonal antibody suggested by the National Institute of Standards and Technology (NISTmAb) was used as test molecule. The total concentration and the mixing ratio of two types of carrier ampholytes and the added amounts of urea and l ‐arginine were selected as factors. The effects of these factors on 13 different responses such as resolution or pI values were investigated. In order to reduce the total number of experiments, a d ‐optimal design with 20 different parameter combinations and six replicates each was chosen. The most significant effects of the four factors were shown for the parameters related to separation efficiency and peak position. In addition, the extent of the factor's effect could be assessed. Depending on the selected factor combination, the pI value can differ up to approximately 0.15 pI units and the resolution value between main peak and adjacent basic peak can range from approximately 1.6 to 2.5, for example.     

十二烷基硫酸钠毛细管电泳法分析非还原单克隆抗体药物纯度的前处理条件优化

十二烷基硫酸钠毛细管电泳法因具有快速、分辨率高的优势，已成为单克隆抗体纯度分析的主流方法。在非还原单克隆抗体纯度检测中，其样品前处理过程对于结果有显著影响。为优化样品前处理，考察了以碘乙酰胺和N-乙基马来酰亚胺为巯基封闭剂，在pH 6.0~9.0的样品缓冲液条件下，不同种类和批次的单抗的纯度。发现在两种巯基封闭剂中，高pH的样品缓冲液会影响巯基封闭的效果，产生较多的抗体片段；而在低pH条件下，抗体片段较少，单抗的纯度更高。因此在进行非还原单抗的纯度检测中，pH 6.0的样品缓冲液为最佳的前处理条件。     

Simultaneous determination of Zr(IV) and Hf(IV) by CE using precolumn complexation with a [PW(11)O(39)](7-) ligand

A CE method was developed for the simultaneous determination of Zr(IV) and Hf(IV) at trace levels. A lacunary Keggin-type [PW(11)O(39)](7-) ligand reacted quantitatively with a mixture of trace amounts of Zr(IV) and Hf(IV) to form the so-called ternary Keggin-type anions [P(Zr(IV)W(11))O(40)](5-) and [P(Hf(IV)W(11))O(40)](5-) in 0.010 M monochloroacetate buffer (pH 2.2). Since both ternary anions possessed different electrophoretic mobilities and high molar absorptivities in the UV region, Zr(IV) and Hf(IV) were determined simultaneously with direct UV detection at 258 nm. Each peak height was linearly dependent on the concentration of Zr(IV) or Hf(IV) in the range of 5.0x10(-7)-1.0x10(-5) M; a detection limit of 2x10(-7) M was achieved. The utility of the proposed CE method was demonstrated for the simultaneous determination of Zr(IV) and Hf(IV) in natural water samples with satisfactory results.     

Sheathless capillary electrophoresis electrospray ionization‐mass spectrometry interface based on poly(dimethylsiloxane) membrane emitter and thin conducting liquid film

This study develops a sheathless CE‐MS interface using a robust PDMS membrane emitter and liquid‐film electric conduction. A 3D mold was constructed for casting the device by using a one‐step casting procedure. The interface consisted of a 125 μm‐thick triangular emitter with a 50 μm‐diameter microchannel, a conducting reservoir, and a 375 μm‐diameter channel for assembling the separation capillary. The separation capillary was inserted into the 375 μm channel and connected to the emitter through the conducting reservoir. The electric contact for the CE outlet was established through a conductive liquid film in the space between the capillary terminus and the 375 μm channel. The one‐step casting procedure and using a membrane emitter instead of a tapered emitter produced an easily fabricated and robust interface. A stable electrospray was obtained from 30 to 350 nL/min. Analyzing a five‐peptide mixture in low‐EOF (60 nL/min) and high‐EOF (210 nL/min) conditions demonstrated the utility of the interface.     

Effect of quasi‐interpenetrating network of polyacrylamide and poly(N,N‐dimethylacrylamide) on separation of dsDNA fragments and basic protein using CE

Quasi‐interpenetrating network (quasi‐IPN) of linear polyacrylamide (LPA) with low molecular mass and poly(N,N‐dimethylacrylamide) (PDMA), which is shown to uniquely combine the superior sieving ability of LPA with the coating ability of PDMA, has been synthesized for application in dsDNA and basic protein separation by CE. The performance of quasi‐IPN on dsDNA separation was determined by polymer concentration, electric field strength, LPA molecular masses and different acrylamide (AM) to N,N‐dimethylacrylamide (DMA) ratio. The results showed that all fragments in Φ×174/HaeIII digest were achieved with a 30 cm effective capillary length at –6 kV at an appropriate polymer solution concentration in bare silica capillaries. Furthermore, EOF measurement results showed that quasi‐IPN exhibited good capillary coating ability, via adsorption from aqueous solution, efficiently suppressing EOF. The effect of the buffer pH values on the separation of basic proteins was investigated in detail. The separation efficiencies and analysis reproducibility demonstrated the good potentiality of quasi‐IPN matrix for suppressing the adsorption of basic proteins onto the silica capillary wall. In addition, when quasi‐IPN was used both as sieving matrix and dynamic coating in bare silica capillaries, higher peak separation efficiencies, and better migration time reproducibility were obtained.     

Enantioseparation by CE with vancomycin as chiral selector: Improving the separation performance by dynamic coating of the capillary with poly(dimethylacrylamide)

An approach for improving the separation performance of the enantioseparation by CE with vancomycin as chiral selector is described. In the present method, a solution of poly(dimethylacrylamide) (PDMA) was used for dynamic coating of the capillary wall to minimize the adsorption of vancomycin onto the capillary wall, and to depress the EOF. Compared with the bare fused-silica capillaries and the capillaries coated with the polycationic polymer hexadimethrine bromide (HDB), the PDMA-coated capillary displayed the best separation performance. The resulting coating could withstand hundreds of runs without losing its function. Moreover, a partial filling technique was applied to avoid interference in detection caused by the presence of vancomycin in the buffer. The separation time was shortened when a short-end-injection technique was applied. Several parameters such as buffer pH, vancomycin concentration and plug length of the vancomycin solution for the separation were optimized. Under the optimal conditions, all tested enantiomers, including FMOC amino acids derivatives, ketoprofen and fenoprofen, were baseline-separated in less than 4.2 min.     

An ionic liquid coating for determination of sildenafil and UK-103,320 in human serum by capillary zone electrophoresis-ion trap mass spectrometry

Ionic liquid (IL) was covalently bonded onto the silica capillary surface and the electroosmotic flow was reversed over a pH range of 3.5 to 7. Sildenafil (SL) and its metabolite UK-103,320 (UK) in human serum were detected by solid-phase extraction followed by capillary zone electrophoresis-mass spectrometry analysis. The running buffer contained 10 mM acetic acid adjusted to pH 4.5 with 1 M ammonia, and the separating voltage was set to -25 kV. The adsorption of the analytes onto the bare capillary wall was eliminated by the IL coating and the drugs were baseline-separated within 14 min with detection limits (S/N = 3) of 14 and 17 ng/mL for SL and UK, respectively. The method developed showed good intraday precision in terms of relative standard deviation (RSD) with respect to migration time (RSD 相似文献   

Assembly of poly(dopamine)/poly(acrylamide) mixed coatings by a single‐step surface modification strategy and its application to the separation of proteins using capillary electrophoresis

In this work, a facile approach was developed to modify a fused‐silica capillary inner surface based on poly(dopamine) and poly(acrylamide) mixed coatings for protein separation by capillary electrophoresis. The surface morphology, thickness, and chemical components of poly(dopamine)/poly(acrylamide) mixed coatings on glass slides and silicon wafers were studied by atom force microscopy, ellipsometry, and X‐ray photoelectron spectroscopy, respectively. The hydrophilicity and stability of the mixed coatings on glass slides were investigated by static water contact angle measurements. A comparative study of electroosmotic flow showed that the poly(dopamine)/poly(acrylamide) mixed coatings could provide effective suppression of electroosmotic flow. Meanwhile, the fast and efficient separations of the mixture of four alkaline proteins, the mixture of acidic, basic, and neutral proteins and egg white proteins were obtained by capillary electrophoresis. Furthermore, the consecutive protein separation runs and low RSDs of migration time demonstrated that these poly(dopamine)/poly(acrylamide) mixed coatings were capable of minimizing protein adsorption during the protein separation by using capillary electrophoresis.     

A New Competitive Inhibitory Monoclonal Antibody to Carboxypcptidase A (CPA)

Catalyticantibodiesareanewclassofbiocatalysts,andhavebeenusedtocatalyzemanytypesofchemicalreactionsuccessfully'.Atpresent,itisdifficulttousecatalyticantibodiestocatalyzethehydrolysisofamidebond.Howtodesignandpreparethecatalyticantibodiesthatcaneffectivelycatalyzethehydrolysisofamidebondhasbeenanunsolvedproblem.Butthehydrolysisandsynthesisofamidebondareveryimportantchemicalandbiologicalreactions.Therefore,toproducethecatalyticantibodieswhichcancatalyzethehydrolysisofamidebondisasignificantresea…