Rhodium‐Catalyzed [3+2+2] and [2+2+2] Cycloadditions of Two Alkynes with Cyclopropylideneacetamides

It has been established that a cationic rhodium(I)/H₈‐binap complex catalyzes the [3+2+2] cycloaddition of 1,6‐diynes with cyclopropylideneacetamides to produce cycloheptadiene derivatives through cleavage of cyclopropane rings. In contrast, a cationic rhodium(I)/(S)‐binap complex catalyzes the enantioselective [2+2+2] cycloaddition of terminal alkynes, acetylenedicarboxylates, and cyclopropylideneacetamides to produce spiro‐cyclohexadiene derivatives which retain the cyclopropane rings.     

Intramolecular Benzyne–Phenolate [4+2] Cycloadditions

An intramolecular benzyne–phenolate [4+2] cycloaddition is reported. Benzyne precursors, having vicinal halogen‐sulfonate functionalities, linked with a phenol(ate) by various tether groups undergo efficient intramolecular [4+2] cycloaddition by treatment with either Ph₃MgLi or nBuLi for halogen–metal exchange to form various benzobarrelenes.     

A density functional theory study of the stereoselectivity of Cu(OTf)2-catalyzed [3+2] cycloaddition of trifluoromethylated N-acylhydrazones and isoprene: A concerted asynchronous mechanism

Here we employ density functional theory calculations to systematically investigate the underlying mechanism of Cu(OTf)₂-catalyzed [3+2] cycloaddition reactions in the synthesis of CF₃-substituted pyrazolidines. About eight possible initial configurations of the [3+2] reaction is considered, and all relevant reactants, transition states, and products are optimized. Based on these structures, internal reaction coordinate paths, and wavefunction analysis results, we conclude that the Cu(OTf)₂-catalyzed [3+2] cycloaddition follows a concerted asynchronous mechanism. The C N bond forms immediately after the formation of the C C bond. Among the eight reaction paths, the energy barrier for the [3+2] reaction that leads to the CF₃-substituted syn-pyrazolidine is the lowest, ∼5.4 kcal/mol, which might result in the diastereoselectivity that is observed in the experiment. This work not only gives the detailed mechanism of the Cu(OTf)₂-catalyzed [3+2] cycloaddition but can also be helpful for the future designation of Cu(OTf)₂-based cycloaddition processes.     

Pseudo-bimolecular [2+2] cycloaddition studied by time-resolved photoelectron spectroscopy

The first study of pseudo‐bimolecular cycloaddition reaction dynamics in the gas phase is presented. We used femtosecond time‐resolved photoelectron spectroscopy (TRPES) to study the [2+2] photocycloaddition in the model system pseudo‐gem‐divinyl[2.2]paracyclophane. From X‐ray crystal diffraction measurements we found that the ground‐state molecule can exist in two conformers; a reactive one in which the vinyl groups are immediately situated for [2+2] cycloaddition and a nonreactive conformer in which they point in opposite directions. From the measured S₁ lifetimes we assigned a clear relation between the conformation and the excited‐state reactivity; the reactive conformer has a lifetime of 13 ps, populating the ground state through a conical intersection leading to [2+2] cycloaddition, whereas the nonreactive conformer has a lifetime of 400 ps. Ab initio calculations were performed to locate the relevant conical intersection (CI) and calculate an excited‐state [2+2] cycloaddition reaction path. The interpretation of the results is supported by experimental results on the similar but nonreactive pseudo‐para‐divinyl[2.2]paracyclophane, which has a lifetime of more than 500 ps in the S₁ state.     

Stereoselective Rhodium‐Catalysed [2+2+2] Cycloaddition of Linear Allene–Ene/Yne–Allene Substrates: Reactivity and Theoretical Mechanistic Studies

Allene–ene–allene ( 2 and 5 ) and allene–yne–allene ( 3 and 7 ) N‐tosyl and O‐linked substrates were satisfactorily synthesised. The [2+2+2] cycloaddition reaction catalysed by the Wilkinson catalyst [RhCl(PPh₃)₃] was evaluated. Substrates 2 and 5 , which bear a double bond in the central position, gave a tricyclic structure in a reaction in which four contiguous stereogenic centres were formed as a single diastereomer. The reaction of substrates 3 and 7 , which bear a triple bond in the central position, gave a tricyclic structure with a cyclohexenic ring core, again in a diastereoselective manner. All cycloadducts were formed by a regioselective reaction of the inner allene double bond and, therefore, feature an exocyclic diene motif. A Diels–Alder reaction on N‐tosyl linked cycloadducts 8 and 10 allowed pentacyclic scaffolds to be diastereoselectively constructed. The reactivity of the allenes on [2+2+2] cycloaddition reactions was studied for the first time by density functional theory calculations. This mechanistic study rationalizes the order in which the unsaturations take part in the catalytic cycle, the reactivity of the two double bonds of the allene towards the [2+2+2] cycloaddition reaction, and the diastereoselectivity of the reaction.     

Catalytic Divergent [3+3]‐ and [3+2]‐Cycloaddition by Discrimination Between Diazo Compounds

Highly selective divergent cycloaddition reactions of enoldiazo compounds and α‐diazocarboximides catalyzed by copper(I) or dirhodium(II) have been developed. With tetrakis(acetonitrile)copper(I) tetrafluoroborate as the catalyst epoxypyrrolo[1,2‐a]azepine derivatives were prepared in good yields and excellent diastereoselectivities through the first reported [3+3]‐cycloaddition of a carbonyl ylide. Use of Rh₂(pfb)₄ or Rh₂(esp)₂ directs the reactants to regioselective [3+2]‐cycloaddition generating cyclopenta[2,3]pyrrolo[2,1‐b]oxazoles with good yields and excellent diastereoselectivities.     

[6+2]Cycloadditions catalyzed by titanium complexes

The Ziegler catalyst TiCl₄-Et₂AlCl and the arenetitanium(II) complex (η6-C₆H₆)Ti(II)(AlCl₄)₂ induce [6 + 2]cycloaddition reactions of cycloheptatriene with dienes and acetylenes. Addition to 1,3-butadiene affords 7 - endo - vinyl - bicyclo[4.2.1]nona - 2,4 - diene (main product) and bicyclo[4.4.1]- undeca - 2,4,8 - triene, a product of [6+4]cycloaddition. Isoprene reacts similarly, yielding mainly 7- endo - isopropenyl - bicyclo[4.2.1]nona - 2,4 - diene. 2,3 - Dimethyl - 1,3 - butadiene gives 8,9dimethylbicyclo [4.4.1]undeca - 2,4,8 - triene, a product of [6 + 4]cycloaddition, while [6 + 2]cross-adducts are minor products. The reaction of cycloheptatriene with norbornadiene gives mainly hexacyclo[6.5.1.0^2,7.0^3,12.^6,10.0^9,13]tetradec - 4 - ene via [6+2]cycloaddition followed by intramolecular Diels-Alder reaction. As a by-product, pentacyclo[7.5.0.0^2,7.0^3,5.0⁴⁸]tetradeca - 10,12 - diene is formed by a [2+2+2]mechanism. Addition of cycloheptatriene to diphenylacetylene and bis - (tri- methylsilyl)acetylene furnishes sustituted bicyclo[4.2.1]nona - 2,4,7 - trienes. Alkenes, E,E-2,4 - hexadiene and 1,3 - cyclooctadiene are unreactive. The [6+2]cycloaddition is made possible by coordination of cycloheptatriene to titanium, which changes the symmetry of the frontier orbitals in the triene. The reactivity of the trienophile is also enhanced by coordination to the catalyst.     

Photocatalytic Oxidative [3+2] Cycloaddition for Pyrrolo[2,1-a]isoquinoline Synthesis Using a Porphyrin-Based Covalent Organic Framework

By using a catalytic amount of a porphyrin-based covalent organic framework (Por-Ad-COF) as the efficient recyclable photocatalyst, the photocatalytic oxidative [3+2] cycloaddition reaction between tetrahydroisoquinolines and N-substituted maleimides was developed under aerobic conditions at room temperature. Various substituted pyrrolo[2,1-a]isoquinolines were obtained in moderate to good yields via the dipolar [3+2] cycloaddition and oxidative aromatization cascade process under visible light irradiation. This was the first example to employ the covalent organic framework as the heterogeneous photocatalyst to perform the photocatalytic dipolar [3+2] cycloaddition reaction for the synthesis of pyrrolo[2,1-a]isoquinolines.     

GeCl<Subscript>2</Subscript> cycloaddition reactions to unsaturated organic compounds taking ethylene,buta-1,3-diene,and hexa-1,3,5-triene as examples: a quantum chemical study

The cycloaddition reactions of dichlorogermylene GeCl₂ to ethylene, buta-1,3-diene, and hexa-1,3,5-triene were studied within the framework of the density functional theory (PBE and B3LYP density functionals) and by the ab initio CBS-QB3 method. The energy characteristics of the reaction of GeCl₂ with ethylene were refined and non-empirical quantum chemical calculations of reaction pathways in the GeCl₂ + buta-1,3-diene and GeCl₂ + hexa-1,3,5-triene systems were carried out for the first time. It was shown that the [2+1] cycloaddition reactions are kinetically hindered and thermodynamically unfavorable, while the [4+1] and [6+1] cycloaddition reactions are characterized by low barriers and result in thermodynamically favorable products. For the [4+1] cycloaddition to buta-1,3-diene and [6+1] cycloaddition to hexa-1,3,5-triene, the most energetically favorable reaction pathways involve a suprafacial and antarafacial approach of reactants, respectively.     

Gold(I)-Catalyzed [8+2]-Cycloaddition of 8-Aryl-8-azaheptafulvenes with Allenamides and Ynamides: Regioselective Synthesis of Dihydrocycloheptapyrrole Derivatives

Gold(I)-catalyzed higher-order [8+2] cycloadditions of 8-aryl-8-azaheptafulvenes 1 with allenamides 2 and ynamides 3 were studied. 1,8-Dihydrocycloheptapyrroles 4 were achieved by a regioselective [8+2] cycloaddition of azaheptafulvenes 1 and allenamides 2 in the presence of (2,4-ditBuC₆H₃O)₃PAuNTf₂ as catalyst. Besides, ynamides 3 and 8-aryl-8-azaheptafulvenes 1 , undergo a regioselective [8+2] cycloaddition, to give 2-amido-1,4-dihydrocycloheptapyrroles 7 in the presence of JohnPhosAuNTf₂ as catalyst. Both reactions take place with good yields and with a variety of substituents. A plausible mechanism hypothesis suggests a nucleophilic attack of the 8-azaheptafulvene to the gold activated electron rich allene or alkyne moieties of the allenamide and ynamide, respectively.     

Dihydrobiphenylenes through Ruthenium‐Catalyzed [2+2+2] Cycloadditions of ortho‐Alkenylarylacetylenes with Alkynes

A new synthetic route to dihydrobiphenylenes has been developed. The process involves a mild Ru^II‐catalyzed [2+2+2] dimerization of ortho‐alkenylarylacetylenes or its more versatile variant, the Ru‐catalyzed [2+2+2] cycloaddition of ortho‐ethynylstyrenes with alkynes. Mechanistic aspects of this [2+2+2] cycloaddition are discussed.     

RhCl3/amine-catalyzed [2+2+2] cyclization of alkynes

The RhCl₃·3H₂O/i-Pr₂NEt-catalyzed [2+2+2] cyclotrimerization of alkynes has been achieved. The reaction can be widely used for various alkynes and provides tri- or hexa-substituted benzenes regioselectively in high yields. The [2+2+2] cycloaddition of diynes and alkynes is also developed, and it affords benzene derivatives in moderate to high yields.     

Substituent Effects on Fe+-Mediated [4+2] Cycloadditions in the Gas Phase

The Fe⁺-mediated [4+2] cycloaddition of dienes with alkynes has been examined by four-sector ion-beam and ion cyclotron resonance mass spectrometry. Prospects and limitations of this reaction were evaluated by investigating several Me-substituted ligands. Me Substitution at C(2) and C(3) of the diene, i.e., 2-methylbuta-1,3-diene, 2,3-dimethylbuta-1,3-diene, hardly disturbs the cycloaddition. Similarly, variation of the alkyne by use of propyne and but-2-yne does not affect the [4+2] cycloaddition step, but allows for H/D exchange processes prior to cyclization. In contrast, Me substituents in the terminal positions of the diene moiety (e.g., penta-1,3-diene, liexa-2,4-diene) induce side reactions, namely double-bond migration followed by [3+2] and [5+2] cycloadditions, up to almost complete suppression of the [4+2] cycloaddition for 2,4-dimethylhexa-2,4-diene. Similarly, alkynes with larger alkyl substituents (pent-1-yne, 3,3-dimethylbut-1-yne) suppress the [4 + 2] cycloaddition route. Stereochemical effects have been observed for the (E)- and (Z)-penta-1,3-diene ligands as well as for (E,E)- and (E,Z)-hexa-2,4-diene. A mechanistic explanation for the different behavior of the stereoisomers in the cyclization reaction is developed. Further, the regiochemical aspects operative in the systems ethoxyacetylene/pentadiene/Fe⁺ and ethoxyacetylcne/isoprene/Fe⁺ indicate that substituents avoid proximity.     

Rhodium-Catalyzed Enantioselective [4+2] Cycloadditions of Vinylcarbenes with Dienes

The reaction of 2-siloxycyclo-1,3-dienes with E-vinyldiazoacetates in the presence of the bulky chiral dirhodium tetracarboxylate catalyst, Rh₂(R-p-PhTPCP)₄ results in an enantioselective [4+2] cycloaddition, in which three new stereogenic centers are formed. The [4+2] cycloadducts are generated as single diastereomers with high enantiocontrol (95–98 % ee). When the diene contains an additional stereogenic center, effective kinetic resolution can be achieved.     

Pyridyl-substituted [1,3]Dithiolo-[4,5-<Emphasis Type="Italic">b</Emphasis>][1,4]dithiine-2-thiones

We have obtained 5-(2-pyridyl)[1,3]dithiolo[4,5-b][1,4]dithiine-2-thione for the first time by cycloaddition of 2-ethynylpyridine to 4,5-dihydro-1,3-dithioltrithione (isotrithionedithiol). We have studied this thione, 5-(2-pyridyl)- and 5-(4-pyridyl)-5,6-dihydro[1,3]dithiolo[4,5-b][1,4]dithiine-2-thiones by mass spectroscopy and also IR, UV, ¹H and ¹³C NMR spectra. We have determined the crystal and molecular structure of 5-(2-pyridyl)-5,6-dihydro[1,3]dithiolo[4,5-b][1,4]dithiine-2-thione.__________Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 429–434, March, 2005.     

A Cucurbit[8]uril 2:2 Complex with a Negative pKa Shift

A viologen derivative carrying a benzimidazole group ( V-P-I ²⁺; viologen–phenylene–imidazole V-P-I ) can be dimerized in water using cucurbit[8]uril (CB[8]) in the form of a 2:2 complex resulting in a negative shift of the guest pK_a, by more than 1 pH unit, contrasting with the positive pK_a shift usually observed for CB-based complexes. Whereas 2:2 complex protonation is unclear by NMR, silver cations have been used for probing the accessibility of the imidazole groups of the 2:2 complexes. The protonation capacity of the buried imidazole groups is reduced, suggesting that CB[8] could trigger proton release upon 2:2 complex formation. The addition of CB[8] to a solution containing V-P- I ³⁺ indeed released protons as monitored by pH-metry and visualized by a coloured indicator. This property was used to induce a host/guest swapping, accompanied by a proton transfer, between V-P-I ³⁺ ⋅ CB[7] and a CB[8] complex of 1-methyl-4-(4-pyridyl)pyridinium. The origin of this negative pK_a shift is proposed to stand in an ideal charge state, and in the position of the two pH-responsive fragments inside the two CB[8] which, alike residues engulfed in proteins, favour the deprotonated form of the guest molecules. Such proton release triggered by a recognition event is reminiscent of several biological processes and may open new avenues toward bioinspired enzyme mimics catalyzing proton transfer or chemical reactions.     

[3+2] Cycloaddition of Dimethyl Acetylenedicarboxylate, Methyl Acrylate, and Ethyl Acrylate to 4,5-Dihydro-5-methyl-3H-spiro[benz-2-azepine-3,1'-cyclohexane] N-Oxide

The cycloaddition of methyl acrylate and ethyl acrylate to 4,5-dihydro-5-methyl-3H-spiro[benz-2-azepine-3,1'-cyclohexane] N-oxide proceeds without either regiospecificity or stereospecificity. Eight geometrical isomers of spiro[isoxazolidino[3,2-a]benz-2-azepine-5,1'-cyclohexane] were formed, of which several were isolated as pure samples. The cycloaddition of dimethyl acetylenedicarboxylate proceeds stereoselectively, leading to spiro[isoxazolino[3,2-a]benz-2-azepine-5,1'-cyclohexane] with cis arrangement of the protons at C₍₇₎ and C_(11b).     

Rhodium‐Catalyzed Enantioselective [4+2] Cycloadditions of Vinylcarbenes with Dienes

The reaction of 2‐siloxycyclo‐1,3‐dienes with E‐vinyldiazoacetates in the presence of the bulky chiral dirhodium tetracarboxylate catalyst, Rh₂(R‐p‐PhTPCP)₄ results in an enantioselective [4+2] cycloaddition, in which three new stereogenic centers are formed. The [4+2] cycloadducts are generated as single diastereomers with high enantiocontrol (95–98 % ee). When the diene contains an additional stereogenic center, effective kinetic resolution can be achieved.     

BiCl3-Catalyzed Diastereoselective Intramolecular [4+2] Cycloaddition Reactions Leading to Pyrazole Annulated New Sulfur Heterocycles

Abstract

Intramolecular [4+2] cycloaddition reactions of N-aryl imines generated in situ from anilines and the S-allyl derivatives of pyrazole aldehydes have been carried out in the presence of catalytic amounts of BiCl₃ to provide the corresponding hexahydropyrazolo [4′,3′:5,6]thiopyrano[4,3-b]quinolines in excellent yields. The reactions are highly diastereoselective and the only cis products are isolated exclusively.