Electrocatalytic Activity of Nanohybrids Based on Carbon Nanomaterials and MFe2O4 (M=Co,Mn) towards the Reduction of Hydrogen Peroxide

We report the advantages of hybrid nanomaterials prepared with electrogenerated ferrites (MFe₂O₄; M: Co, Mn) and multi‐walled carbon nanotubes (MWCNTs) or thermally reduced graphene oxide (TRGO) on the electro‐reduction of hydrogen peroxide. Glassy carbon electrodes (GCE) modified with these hybrid nanomaterials dispersed in Nafion/isopropanol demonstrated a clear synergism on the catalytic reduction of reduction of hydrogen peroxide at pH 13.00. The intimate interaction between MFe₂O₄ and carbon nanomaterials allowed a better electronic transfer and a facilitated regeneration of M²⁺ at the carbon nanomaterials, reducing the charge transfer resistances for hydrogen peroxide reduction and increasing the sensitivities of the amperometric response.     

Synergistic Effect of Polyoxometalate and Single Walled Carbon Nanotubes on Peroxidase‐like Mimics and Highly Sensitive Electrochemical Detection of Hydrogen Peroxide

A novel Keggin‐type metatungstate hybrid POMs ((APy)₆[H₂W₁₂O₄₀])/carboxylic acid functionalized single‐walled carbon nanotube based amperometric sensing platform was successfully constructed for the sensitive detection of hydrogen peroxide. A simple and reliable procedure was implemented for the synthesis of new composite materials obtained by the covalent grafting of (APy)₆[H₂W₁₂O₄₀] onto the surface of (SWCNT‐COOH). The synergistic effect of single walled carbon nanotubes on the electrochemical behavior of (APy)₆[H₂W₁₂O₄₀] was evidenced through the increase of the oxidation and reduction peaks of the polyoxometalate. The sensitivity of hydrogen peroxide detection was increased by a factor of 38.5 in presence of SWCNTs, showing their high influence on peroxidase‐like mimics of (APy)₆[H₂W₁₂O₄₀]. The detection limit, the response time, the repeatability and the shelf lifetime were respectively 0.4 μM, 10 s, <4%, 60 days.     

Co2SnO4/Carbon Nanotubes Composites: A Novel Approach for Electrochemical Sensing of Hydrogen Peroxide

For the first time Co₂SnO₄ (CTO)/Carbon nanotubes (CNT) composites were prepared and used to modify glassy carbon electrodes for the amperometric determination of hydrogen peroxide. The catalytic activity of composites towards the oxidation of hydrogen peroxide was dependent on the quantity of CNT present in the composite and to the pH of the medium. The pure cobalt stannate phase with a ratio of 3 : 1 (CTO:CNT) exhibited the best catalytic activity towards hydrogen peroxide oxidation at low potentials (0.200 and 0.500 V). A linear relationship between current and hydrogen peroxide concentration was obtained with a sensitivity of 95 and 258 μA mM⁻¹ and a detection limit of 0.130 and 0.08 μM respectively.     

An Amperometric Biosensor Based on the Coimmobilization of Horseradish Peroxidase and Methylene Blue on a Carbon Nanotubes Modified Electrode

A novel hydrogen peroxide biosensor has been constructed based on the characteristics of the carbon nanotube. The multiwall carbon nanotube (MWNT) was used as a coimmobilization matrix to incorporate horseradish peroxidase (HRP) and electron transfer mediator methylene blue (MB) onto a glassy carbon electrode surface. Cyclic voltammetry and amperometric measurements were employed to demonstrate the feasibility of methylene blue as an electron carrier between the immobilized peroxidase and the surface of glassy carbon electrode. The amperometric response of this resulting biosensor to H₂O₂ shows a linear relation in the range from 4 μM to 2 mM. The detection limit was 1 μM when the signal to noise ratio is 3. The presence of dopamine and ascorbic acid hardly affects the sensitive determination of H₂O₂. This biosensor also possesses very good stability and reproducibility.     

Pt Nanoparticle‐modified Carbon Fiber Microelectrode for Selective Electrochemical Sensing of Hydrogen Peroxide

We report a simple approach to the production of carbon fiber‐based amperometric microbiosensors for selective detection of hydrogen peroxide (H₂O₂), which was achieved by electrometallization of carbon fiber microelectrodes (CFMs) by electrodeposition of Pt nanoparticles. The Pt‐carbon hybrid sensing interface provided a sensitivity of 7711±587 μA ? mM^?1 ? cm^?2, a detection limit of 0.53±0.16 μM (S/N=3), a linear range of 0.8 μM–8.6 mM, and a response time of <2 sec. The morphologies of the Pt nanoparticle‐modified CFMs were characterized by scanning electron microscopy. To achieve selectivity, permseletive layers, polyphenylenediamine (PPD) and Nafion, were deposited resulting in exclusion of the anionic and cationic interferents, ascorbic acid and dopamine, respectively, at their physiologically relevant concentrations. The resultant sensors displayed a sensitivity to hydrogen peroxide of 1381±72 μA ? mM^?1 ? cm^?2, and a detection limit of 0.86±0.19 μM (S/N=3). This simple and rapid metallization method converts carbon fiber microelectrodes, which are readily accessible, to microscale Pt electrodes in 2 min, providing a platform for oxidase‐based amperometric biosensors with improved spatial resolution over more commonly used platinum electrode array microprobes.     

Preconcentration and Successful Selective Detection of Traces of Diclofenac in Water using a Nanostructured Modified Carbon Paste Electrode

A highly sensitive, simple and low cost sensor for the quantification of the diclofenac has been constructed. This sensor consists of a carbon paste nano-structured by Multi-Walled Carbon Nanotubes (G-MWCNT)-CPE. Scanning electron microscopy (SEM) and voltammetry technique were used to characterize the electrode material and to determine the analytical performances of the sensor in comparison with those obtained at a G-CPE. The electrochemical oxidation of diclofenac on both G-CPE and (G-MWCNT)-CPE electrodes is mainly controlled by adsorption, presenting a maximum peak current intensity in H₂SO₄ 0.5 mol L⁻¹. The carbon nanotubes, as well as they provide higher conductivity of the paste, act as spacers between the flake graphite particles and avoid their stacking in order to make the surface of graphite particles more accessible to DCF adsorption. The voltammetric measurements of diclofenac on (G-MWCNT)-CPE provide a large quantification range from 0.02 to 1 μmol L⁻¹, a detection limit of 0.004 μmol L⁻¹ and quantification limit of 0.014 μmol L⁻¹ under the optimized operating conditions (H₂SO₄, 0.25 M+KCl 0.25 M, scan rate of 30 mV s⁻¹, preconcentration time 18 min. and MWNTC% (30 %)). The (G-MWCNT)-CPE sensor was successfully applied to natural water samples, just acidified with sulfuric acid (pH<1). These samples were doped with diclofenac in sub-micromolar range and the developed method was validated with excellent recoveries (within a maximum of 3 % difference from 100 %) for all samples indicating no interference effects of the water matrix.     

Electrocatalytic Reduction of H2O2 and Oxygen on the Surface of Thionin Incorporated onto MWCNTs Modified Glassy Carbon Electrode: Application to Glucose Detection

A new H₂O₂ enzymeless sensor has been fabricated by incorporation of thionin onto multiwall carbon nanotubes (MWCNTs) modified glassy carbon electrode. First 50 μL of acetone solution containing dispersed MWCNTs was pipetted onto the surface of GC electrode, then, after solvent evaporations, the MWCNTs modified GC electrode was immersed into an aqueous solution of thionin (electroless deposition) for a short period of time <5–50 s. The adsorbed thin film of thionin was found to facilitate the reduction of hydrogen peroxide in the absence of peroxidase enzyme. Also the modified electrode shows excellent catalytic activity for oxygen reduction at reduced overpotential. The rotating modified electrode shows excellent analytical performance for amperometric determination of hydrogen peroxide, at reduced overpotentials. Typical calibration at ?0.3 V vs. reference electrode, Ag/AgCl/3 M KCl, shows a detection limit of 0.38 μM, a sensitivity of 11.5 nA/μM and a liner range from 20 μM to 3.0 mM of hydrogen peroxide. The glucose biosensor was fabricated by covering a thin film of sol–gel composite containing glucose oxides on the surface of thionin/MWCNTs modified GC electrode. The biosensor can be used successfully for selective detection of glucose based on the decreasing of cathodic peak current of oxygen. The detection limit, sensitivity and liner calibration rang were 1 μM, 18.3 μA/mM and 10 μM–6.0 mM, respectively. In addition biosensor can reach 90% of steady currents in about 3.0 s and interference effect of the electroactive existing species (ascorbic acid–uric acid and acetaminophen) is eliminated. The usefulness of biosensor for direct glucose quantification in human blood serum matrix is also discussed. This sensor can be used as an amperometric detector for monitoring oxidase based biosensors.     

A Third‐Generation Hydrogen Peroxide Biosensor Based on Horseradish Peroxidase Covalently Immobilized on Electrografted Organic Film on Screen‐Printed Carbon Electrode

A new convenient strategy to fabricate a third‐generation hydrogen peroxide biosensor was described. The screen‐printed carbon electrode (SPCE) was first modified with a layer of 4‐nitrophenyl assembled from the 4‐nitroaniline diazonium salt synthesized in situ in acidic aqueous solution. Next, the nitro groups were converted to amines followed by crosslinking to the horseradish peroxidase (HRP) by glutaraldehyde. The redox chemistry of the active center of the HRP was observed and the HRP‐modified electrode displayed electrocatalytic activity towards the reduction of hydrogen peroxide (H₂O₂) without any mediators. H₂O₂ was determined in a linear range from 5.0 μM to 50.0 μM, with a detection limit of 1.0 μM. Furthermore, the biosensor exhibited fast amperometric response, good reproducibility and long‐term stability.     

Development of Nonenzymatic Hydrogen Peroxide Sensor Based on Successive Pd‐Ag Electrodeposited Nanoparticles on Glassy Carbon Electrode

A novel strategy to fabricate hydrogen peroxide (H₂O₂) sensor was developed by electrodepositing palladium? silver nanoparticles (NPs) on a glassy carbon electrode. The morphology of the modified electrode was characterized by Scanning electron microscopy (SEM). The result of electrochemical experiments showed that such constructed sensor had a favorable catalytic ability, high sensitivity, excellent selectivity towards reduction of hydrogen peroxide (H₂O₂). The response to H₂O₂ is linear in the range between 0.30 μM to 2.50 mM, and the detection limit is 0.1 μM (at an S/N of 3).     

An Iron Impurity in Multiwalled Carbon Nanotube Complexes with Chitosan that Biomimics the Heme‐Peroxidase Function

A new biomimetic functional system having an impure multiwalled carbon nanotube (MWCNT‐Fe)–chitosan biopolymer (H₂N–CHIT) chemically modified glassy carbon electrode (GCE/[MWCNT‐Fe:H₂N‐CHIT]) has been developed and demonstrated efficient hydrogen peroxide electrocatalytic and electrochemical sensing applications in pH 7 phosphate buffer solution (PBS). The hybrid system showed a stable and well‐defined surface confined redox peak at an apparent electrode potential, E°′=?0.22 V versus Ag/AgCl with surface excess value 13.63 nmol cm^?2. Physicochemical characterizations of the hybrid by using FESEM, TEM, Raman spectroscopy, FTIR, and various control electrochemical experiments revealed that the iron impurity in the MWCNT interacted with the amino functional group of the chitosan polymer and thereby formed an unique complex‐like structure ([MWCNT‐Fe^III/II:NH₂‐CHIT]), similar to heme peroxidase with a central Fe^III/II‐redox‐active site. The biomimetic system followed Michaelis–Menten‐type reaction kinetics for the H₂O₂ reduction reaction with a K_M value of 0.23 mM . At pH 7, amperometric i–t sensing and flow‐injection analysis of H₂O₂ on the biomimetic system showed calibration plots in windows 5–500 and 50–2500 μM , with detection‐limit values of 2.3 and 9.7 μM , respectively. Unlike most of the previously reported systems that undergo serious interferences in physiological pH, the biomimetic system displayed a remarkable tolerance to other co‐existing interferants (such as cysteine, ascorbic acid, uric acid, nitrate, and nitrite), at a H₂O₂ detection potential similar to the peroxidase enzyme. The ability of the biosensor system to perform routine analyses was demonstrated by the detection of H₂O₂ present in simulated milk and clinical and cosmetic samples with appreciable recovery values.     

A Synergistic Effect of Phthalimide-Substituted Sulfanyl Porphyrazines and Carbon Nanotubes to Improve the Electrocatalytic Detection of Hydrogen Peroxide

A sulfanyl porphyrazine derivative with peripheral phthalimide moieties was metallated with cobalt(II) and iron(II) metal ions. The purity of the macrocycles was confirmed by HPLC, and subsequently, compounds were characterized using various analytical methods (ES-TOF, MALDI-TOF, UV–VIS, and NMR spectroscopy). To obtain hybrid electroactive electrode materials, novel porphyrazines were combined with multiwalled carbon nanotubes. The electrocatalytic effect derived from cobalt(II) and iron(II) cations was evaluated. As a result, a significant decrease in the overpotential was observed compared with that obtained with bare glassy carbon (GC) or glassy carbon electrode/carbon nanotubes (GC/MWCNTs), which allowed for sensitive determination of hydrogen peroxide in neutral conditions (pH 7.4). The prepared sensor enables a linear response to H₂O₂ concentrations of 1–90 µM. A low detection limit of 0.18 μM and a high sensitivity of 640 μA mM⁻¹ cm⁻² were obtained. These results indicate that the obtained sensors could potentially be applied in biomedical and environmental fields.     

Effect of the hydrogen peroxide concentration in stereospecific oxidation of alkanes by models of non-heme oxygenases

The biomimetic oxidation of alkanes (cyclohexane, adamantane, cis-1,2-dimethylcyclohexane) with hydrogen peroxide catalyzed by Fe(II) complexes containing tetradentate nitrogen ligands (M = [Fe(bpmen)(MeCN)₂](ClO₄)₂ (bispicolyl-1,2-dimethylethylenediamine), [Fe(bpen)(MeCN)₂](ClO₄)₂ (bispicolylethylenediamine), and [Fe(tpcaH)(MeCN)₂]₂(ClO₄)₄ (tripyridylcarboxamide) is studied. The effects of the hydrogen peroxide concentration on the alcohol/ketone (A/K) ratio and on the regioselectivity of oxidation (3/2) are discovered. Rather high stereospecificity (RC = 96–99%) persisting at high hydrogen peroxide concentrations is hardly consistent with the participation of the HO^. radical, inferred from the rather low regioselectivity and low A/K ratio observed under these conditions. The molecular mechanism of oxygen transfer from hydrogen peroxide, which was earlier proved reliably for low concentrations of hydrogen peroxide ([H₂O₂]/[M] ? 10), can be applied to high peroxide concentrations ([H₂O₂]/[M] > 10) if a new ferryl species containing two equivalents of the oxidant is assumed to be involved in the process. This assumption is confirmed by the direct stereospecific formation of alkyl hydroperoxide from alkane at a high concentration of hydrogen peroxide.     

Transition metal complexes enslaved in the supercages of zeolite-Y: DFT investigation and catalytic significance

A series of zeolite-Y encapsulated hybrid catalysts, [M(STCH)·xH₂O]-Y have been prepared by encapsulating Schiff base complexes [where M?=?Mn(II), Fe(II), Co(II), Ni(II); (x?=?3) and Cu(II); (x?=?1); H₂STCH?=?salicylaldehyde thiophene-2-carboxylic hydrazone] in zeolite-Y matrix by flexible ligand method. These hybrid materials have been characterized by various physico-chemical techniques such as ICP-OES, elemental analyses, (FT-IR and electronic) spectral studies, BET, scanning electron micrographs, thermal analysis and X-ray powder diffraction patterns. X-ray powder diffraction analysis reveals that the structural integrity of the mother zeolite in the hybrid material remained intact upon immobilization of the complex. Density functional theory is employed to calculate the relaxed structure, bond angle, bond distance, dihedral angle, difference of highest occupied molecular orbital and lowest unoccupied molecular orbital energies gap and electronic density of states of ligand and their neat transition metal complexes. The hybrid materials are active catalysts for the hydroxylation of phenol using hydrogen peroxide (30% H₂O₂) as an oxidant in order to selectively synthesize catechol or hydroquinone, amongst them [Cu(STCH)·H₂O]-Y shown the highest % of selectivity towards catechol (81.3%).     

Amperometric Biosensor for Hydrogen Peroxide,Using Supramolecularly Immobilized Horseradish Peroxidase on the β‐Cyclodextrin‐Coated Gold Electrode

Horseradish peroxidase, previously modified with 1‐adamantane moieties, was supramolecularly immobilized on gold electrodes coated with perthiolated β‐cyclodextrin. The functionalized electrode was employed for the construction of an amperometric biosensor device for hydrogen peroxide using 1 mM hydroquinone as electrochemical mediator. The biosensor exhibited a fast amperometric response (6 s) and a good linear response toward H₂O₂ concentration between 12 μM and 450 μM. The biosensor showed a sensitivity of 1.02 mA/M cm², and a very low detection limit of 5 μM. The electrode retained 97% of its initial electrocatalytic activity after 30 days of storage at 4 ⁰C in 50 mM sodium phosphate buffer, pH 7.0.     

Electrocatalysis via Direct Electrochemistry of Myoglobin Immobilized on Colloidal Gold Nanoparticles

The direct electron transfer between immobilized myoglobin (Mb) and colloidal gold modified carbon paste electrode was studied. The Mb immobilized on the colloidal gold nanoparticles displayed a pair of redox peaks in 0.1 M pH 7.0 PBS with a formal potential of –(0.108 ± 0.002) V (vs. NHE). The response showed a surface‐controlled electrode process with an electron transfer rate constant of (26.7 ± 3.7) s ^?1 at scan rates from 10 to 100 mV s^?1 and a diffusion‐controlled process involving the diffusion of proton at scan rates more than 100 mV s^?1. The immobilized Mb maintained its activity and could electrocatalyze the reduction of both hydrogen peroxide and nitrite. Thus, the novel renewable reagentless sensors for hydrogen peroxide and nitrite were developed, respectively. The activity of Mb with respect to the pseudo peroxidase with a K_M^app value of 0.65 mM could respond linearly to hydrogen peroxide concentration from 4.6 to 28 μM. The sensor exhibited a fast amperometric response to NO₂^? reduction and reached 93% of steady‐state current within 5 s. The linear range for NO₂^? determination was from 8.0 to 112 μM with a detection limit of 0.7 μM at 3σ.     

Direct Electrochemistry of Hemoglobin Immobilized on Carbon‐Coated Iron Nanoparticles for Amperometric Detection of Hydrogen Peroxide

A novel method for preparation of hydrogen peroxide biosensor was presented based on immobilization of hemoglobin (Hb) on carbon‐coated iron nanoparticles (CIN). CIN was firstly dispersed in a chitosan solution and cast onto a glassy carbon electrode to form a CIN/chitosan composite film modified electrode. Hb was then immobilized onto the composite film with the cross‐linking of glutaraldehyde. The immobilized Hb displayed a pair of stable and quasireversible redox peaks and excellent electrocatalytic reduction of hydrogen peroxide (H₂O₂), which leading to an unmediated biosensor for H₂O₂. The electrocatalytic response exhibited a linear dependence on H₂O₂ concentration in a wide range from 3.1 μM to 4.0 mM with a detection limit of 1.2 μM (S/N=3). The designed biosensor exhibited acceptable stability, long‐term life and good reproducibility.     

Electrocatalytic Oxidation of Hydrogen Peroxide on Poly(m‐toluidine)‐Nickel Modified Carbon Paste Electrode in Alkaline Medium

The poly(m‐toluidine) film was prepared by using the repeated potential cycling technique in an acidic solution at the surface of carbon paste electrode. Then transition metal ions of Ni(II) were incorporated to the polymer by immersion of the modified electrode in a 0.2 M NiSO₄, also the electrochemical characterization of this modified electrode exhibits stable redox behavior of the Ni(III)/Ni(II) couple. The electrocatalytic ability of Ni(II)/poly(m‐toluidine)/modified carbon paste electrode (Ni/PMT/MCPE) was demonstrated by electrocatalytic oxidation of hydrogen peroxide with cyclic voltammetry and chronoamperometry methods in the alkaline solution. The effects of scan rate and hydrogen peroxide concentration on the anodic peak height of hydrogen peroxide oxidation were also investigated. The catalytic oxidation peak current showed two linear ranges with different slopes dependent on the hydrogen peroxide concentration and the lower detection limit was 6.5 μM (S/N=3). The catalytic reaction rate constant, (k_h), was calculated 5.5×10² M^?1 s^?1 by the data of chronoamperometry. This modified electrode has many advantages such as simple preparation procedure, good reproducibility and high catalytic activity toward the hydrogen peroxide oxidation. This method was also applied as a simple method for routine control and can be employed directly without any pretreatment or separation for analysis cosmetics products.     

The effects of carbon nanotubes on the electrocatalysis of hydrogen peroxide by metallo-phthalocyanines

The pre-grafted screen-printed gold electrode modified with phenyl-amino monolayer was investigated for covalent immobilization of phenyl-amine functionalized single-walled carbon nanotubes (PA-SWCNT) and metal tetra-amino phthalocyanine (MTAPc) using Schiff-base reactions with benzene-1,4-dicarbaldehyde (BDCA) as cross-linker. The PA-SWCNT and MTAPc modified electrodes were applied as hybrids for electrochemical sensing of H₂O₂. The step-by-step fabrication of the electrode was followed using electrochemistry, impedance spectroscopy, scanning electron microscopy and Raman spectroscopy and all these techniques confirmed the fabrication and the immobilization of PA-SWCNT, MnTAPc and CoTAPc onto gold surfaces. The apparent electron transfer constant (k_app) showed that the carbon nanotubes and metallo-phthalocyanines hybrids possess good electron transfer properties compared to the bare, pre-grafted and the MTAPc modified gold electrode surfaces without PA-SWCNT. The electrochemical sensing of hydrogen peroxide was successful with PA-SWCNT-MTAPc hybrid systems showing higher electrocatalytic currents compared to the other electrodes. The analytical parameters obtained using chronoamperometry gave good linearity at H₂O₂ concentrations ranging from 1.0 to 30.0 μmol L⁻¹. The values for the limit of detection (LoD) were found to be of the orders of 10⁻⁷ M using the 3δ for all the electrodes. The PA-SWCNT-MTAPc modified SPAuEs were much more sensitive compared to PA-MTAPc modified SPAuEs.     

Amperometric Glucose Biosensors Based on Integration of Glucose Oxidase onto Prussian Blue/Carbon Nanotubes Nanocomposite Electrodes

Nanosized Prussian blue (PB) particles were synthesized with a chemical reduction method and then the PB nanoparticles were assembled on the surface of multiwall carbon nanotubes modified glassy carbon electrode (PB/MWNTs/GCE). The results showed that the PB/MWNTs nanocomposite exhibits a remarkably improved catalytic activity towards the reduction of hydrogen peroxide. Glucose oxidase (GOD) was immobilized on the PB/MWNTs platform by an electrochemically polymerized o‐phenylenediamine (OPD) film to construct an amperometric glucose biosensor. The biosensor exhibited a wide linear response up to 8 mM with a low detection limit of 12.7 μM (S/N=3). The Michaelis–Menten constant K_m and the maximum current i_max of the biosensor were 18.0 mM and 4.68 μA, respectively. The selectivity and stability of the biosensor were also investigated.     

Easily Prepared Co3O4 Doped Porous Carbon Material Decorated with Single-wall Carbon Nanotubes Applied in Voltammetric Sensing of Antioxidant α-lipoic Acid

The homemade, porous carbon material, thermolysis prepared from Novolac phenol-formaldehyde resin, in situ modified with Co₃O₄ nanoparticles and mixed with single-wall carbon nanotubes, was used in selective sensing of prominent antioxidant α-lipoic acid (LA). XRD, SEM and EIS measurements were used for characterization of material composition, structure, morphology and improved conductivity. The quantification of LA at TPCo₃O₄&SWCNTCPE was done by a square-wave voltammetric technique in BR buffer solution at pH 6. The linear working range was recorded from 2 to 100 μM of LA and the proposed electrode material was successfully applied in the determination of LA in dietary supplements.