Effect of electron-withdrawing groups on photovoltaic performance of thiophene-vinyl-thiophene derivative and benzochalcogenadiazole based copolymers: A computational study

We report a density functional theory study of the effect of electron-withdrawing groups such as –F, –CN, –NO₂ on the geometrical, optoelectronic, intramolecular charge transfer (ICT), and photovoltaic properties of (E)-1,2-bis(5-alkyl-[2,3′-bithiophene]-2′-yl)ethene (TVT-T) based donor-acceptor (D-A) copolymers with different acceptor units, that is, benzo[c][1,2,5]thiadiazole, benzo[c][1,2,5]oxadiazole, and benzo[c][1,2,5]selenadiazole. The computed optical absorption spectra of the designed compounds lie in the visible and near-infrared regions. Of all the studied copolymers, -CN substituted and Se-based compound displays the lowest HOMO-LUMO (E _{H - L}) gap and optical band gap (E _opt). The exciton binding energy (E _b) is found to be smaller for O-incorporated compounds and -CN substituted copolymer as well, inferring more ICT. The electron-hole coherence concentrated over the D-A units is nearly the same for -CN and -NO₂ substituted compounds, but larger in -F derivatives, indicating weak electron-hole coupling in the formers. Comparatively larger dipole moment (6.421 Debye-9.829 Debye) and charge transfer length (D _CT) (1.976 Å-3.122 Å) for -CN derivatives lead to enhanced ICT properties. The designed donors yield good hole mobilities (0.127-6.61 cm² V⁻¹ s⁻¹) and the predicted power conversion efficiencies are calculated to be as high as ~6%-7% for –CN and –NO₂ substituted compounds.     

Synthesis,Crystal Structure,and Photophysical Properties of (1E,3E,5E)‐1,3,4,6‐Tetraarylhexa‐1,3,5‐trienes: A New Class of Fluorophores Exhibiting Aggregation‐Induced Emission

Double Horner–Wadsworth–Emmons reaction of (E)‐2,3‐diaryl‐1,4‐bis(diethylphosphonyl)but‐2‐ene with (p‐substituted) benzaldehydes gave (1E,3E,5E)‐1,3,4,6‐tetraarylhexa‐1,3,5‐trienes in moderate to good yields. Substitution of electron‐withdrawing or ‐donating groups at the para position of the 1,6‐diphenyl groups induced a slight bathochromic shift of UV spectra measured in CHCl₃ compared with that of the parent 1,3,4,6‐tetraphenylhexa‐1,3,5‐triene. Although fluorescence was not observed with all the trienes in CHCl₃, they markedly emitted visible light in powder forms with quantum yields of 0.15–0.44. Introduction of amino groups at the para position of the 3,4‐diphenyl groups induced a bathochromic shift of emission maxima with good solid‐state quantum yields. Thus, the tetraarylated triene framework is found to serve as a new class of fluorophores that exhibit aggregation‐induced emission.     

Copper(II) complexes of acylhydrazones: synthesis,characterization and DNA interaction

Two new acylhydrazone copper(II) complexes of 4‐hydroxy‐N′‐[(1E)‐1‐(4‐methylphenyl)ethylidene]benzohydrazide (HL¹) and 4 ethyl [4‐({(2E)‐2‐[1‐(4‐methylphenyl)ethylidene]hydrazinyl}carbonyl)phenoxy]acetate (HL²) have been synthesized and characterized. The structures of both acylhydrazone and copper(II) complexes were identified by elemental analysis, infrared spectra, UV–visible electronic absorption spectra, magnetic susceptibility measurements, TGA and powder X‐ray diffraction. DNA binding and DNA cleavage activities of the synthesized copper complexes were examined by using UV‐visible titration and agarose gel electrophoresis, respectively. The effect of complex concentration on the DNA cleavage reactions in the absence and presence of H₂O₂ was also investigated. The results indicate that all the complexes bind slightly to calf thymus DNA and cleavage pBR322 DNA. The mechanistic studies demonstrate that a hydrogen peroxide‐derived species and singlet oxygen (¹O₂) are the active oxidative species for DNA cleavage. Copyright © 2013 John Wiley & Sons, Ltd.     

Ultra-Small-Bandgap Conjugated Polymers Based on an N−B←N Unit

Since the breakthrough of conductive polymers in 1977, scientists have made great efforts to create small band gap (E_g) conjugated polymers. Two general strategies to design small E_g conjugated polymers are quinoid structure and donor-acceptor structure. Ultrasmall E_g conjugated polymers (E_g<1.0 eV) always suffer from poor air stability because of high-lying HOMO energy levels. In this work, we report a new strategy to design ultrasmall E_g conjugated polymers by N−B←N unit, i.e. balanced resonant boron-nitrogen covalent bond (B−N) and boron-nitrogen coordination bond (B←N). The resulting polymer exhibits an E_g of 0.82 eV and an onset absorption wavelength of >1500 nm. Moreover, the polymer exhibits excellent air stability because of its low-lying LUMO/HOMO energy levels. An unprecedented property of this polymer is the selective light absorption in the infrared range (800–1500 nm) and high transparency in the visible range (400–780 nm). Using this property, for the first time, we demonstrate the application of conjugated polymers as transparent thermal-shielding coating layer on glass, which reduces indoor solar irradiation through window and consequently reduces power consumption for cooling of buildings and cars in summer.     

Solvatochromism in Binary Solvent Mixtures by Means of a Penta‐tert‐butyl Pyridinium N‐Phenolate Betaine Dye

The solvatochromic behavior of a penta‐tert‐butyl prydinium N‐phenolate betaine dye was studied using UV‐visible spectrophotometry in several binary mixture solvents. The solvent polarity parameter, E_T (1) (kcal. mol^?1) was calculated from the position of the longest‐wavelength intramolecular charge transfer absorption band of this penta‐tert‐butyl betaine dye. For binary solvent mixtures, all plots of E_T (1) versus the mole fraction of a more polar component are nonlinear owing to preferential solvation of the probe by one component of the binary solvent mixture. In the computation of E_T (1) it was assumed that the two solvents mixed interact to form a common structure with an E_T (1) value not always intermediate between those of the two solvents mixed. The results obtained are explained by the strong synergism observed for some of the binary mixtures with strong hydrogen bond donors (HBD) solvents such as alcohols.     

Effects of Nonionic and Mixed Cationic-Nonionic Micelles on the Rate of Alkaline Hydrolysis of 4-Nitrophthalimide

Pseudo-first-order rate constants (k_obs) for alkaline hydrolysis of 4-nitrophthalimide show a monotonic decrease with increase in [C₁₂E₂₃]_T (total concentration of Brij 35) at constant [CH₃CN] and [NaOH]. This micellar effect is explained in terms of a pseudophase micelle model. The rate of hydrolysis becomes too slow to monitor at [C₁₂E₂₃]_T≥0.03 M in the absence of cetyltrimethylammonium bromide (CTABr) and at [C₁₂E₂₃]_T≥0.04 M in the presence of 0.006–0.02 M CTABr at 0.01 M NaOH. The plots of k_obs versus [C₁₂E₂₃]_T show minima at 0.006 and 0.01 M CTABr, while such a minimum is not visible at 0.02 M CTABr.     

Metal Ions Drive Thermodynamics and Photochemistry of the Bis(styryl) Macrocyclic Tweezer

UV/Vis and NMR spectroscopy were used for the structural elucidation and thermodynamic and photochemical studies of the metal‐coordinated crown‐containing macrocyclic tweezer (E,E)‐ 1 . The bis(styryl) tweezer (E,E)‐ 1 formed two types of complexes with magnesium(II): a 1:1 intramolecular asymmetric sandwich complex [(E,E)‐ 1 ]?Mg²⁺ and a 1:2 complex [(E,E)‐ 1 ]?(Mg²⁺)₂. In the former case, there is direct cation intramolecular exchange (0.299 s^?1, ΔG^≠=69.4 kJ mol^?1) between two parts of the bis(styryl) tweezer (E,E)‐ 1 . Addition of barium(II) to the bis(styryl) tweezer (E,E)‐ 1 led to an intramolecular centrosymmetric sandwich 1:1 complex [(E,E)‐ 1 ]?Ba²⁺. Irradiation of [(E,E)‐ 1 ]?Ba²⁺ afforded reversible intramolecular [2π+2π] photocyclization with excellent stereoselectivity and quantitative yield. In contrast, irradiation of [(E,E)‐ 1 ]?(Mg²⁺)₂ resulted in reversible stepwise E,Z‐isomerization.     

New synthesis of ( E )-3,7-dimethyl-2,7-octadienylpropionate and ( E )-3,7-dimethyl-2-octen-1,8-diol, pheromone components of San Jose scaleinsect Quadraspidiotus pernicious and african monarch butterfly Danaus chrysippus

6-Methyl-6-hepten-2-one (3) on reaction with ethyl α-dimethylphosphonate/NaH gives a mixture of (E)-and (Z)-conjugated esters. The major (E)-isomer, (E)-ethyl-3,7-dimethyl-2,7-octadienoate (4), on reduction with LiAlH₄ at room temperature furnishes (E)-3,7-dimethyl-2,7-octadien-l-ol (5) which on propionylation affords (E)-3,7-dimethyl-2,7-octadienyl propionate (1). Carbinol (5) is converted into its silyl ether (E)-2,6-dimethyl-8-t-butyldimethylsilyloxy-l,6-octadiene (6) witht-Bu(Me)₂SiCl in CH₂Cl₂, which on hydroboronation-oxidation with 9-BBN/NaOH-H₂O₂ followed by disilylalion with (n-Bu)₄N⁺ F⁻ at room temperature, gives (E)-3,7-dimethyl-2-octen-l,8-diol (2).     

Synthesis and structures of three isoxazole‐containing Schiff bases

The synthesis and structures of three isoxazole‐containing Schiff bases are reported, namely, (E)‐2‐{[(isoxazol‐3‐yl)imino]methyl}phenol, C₁₀H₈N₂O₂, (E)‐2‐{[(5‐methylisoxazol‐3‐yl)imino]methyl}phenol, C₁₁H₁₀N₂O₂, and (E)‐2,4‐di‐tert‐butyl‐6‐{[(isoxazol‐3‐yl)imino]methyl}phenol, C₁₈H₂₄N₂O₂. All three structures contain an intramolecular O—H…N hydrogen bond, alongside weaker intermolecular C—H…N and C—H…O contacts. The C—O(H) and imine C=N bond lengths were consistent with structures existing in the enol rather than the keto form. Despite having dihedral angles <25°, none of the compounds were observed to be strongly thermochromic, unlike their anil counterparts; however, all three compounds showed a visible colour change upon irradiation with UV light.     

Synthesis of Benz[a]azulenes Substituted at the Benzo Ring

It is shown that the thermal electrocyclic ring-closure reaction of 1,2-di[(E)-prop-1-enyl]benzene to yield 2,3-dimethylnaphthalene (cf. Scheme 1) [10] can successfully be applied also to the synthesis of benz[a]azulenes (cf. Schemes 2 and 3). Starting materials are methyl 4,6,8-trimethylazulen-2-yl ketone ( 6 ) and the corresponding 2-carbaldehyde 5 , which, in a Horner-Emmons reaction, are transformed into the (azulen-2-yl)-acrylates (E)- 8 and (E)- 7 , respectively. Vilsmeier formylation of these compounds, followed by the Horner-Emmons reaction leads to the formation of the bisacrylates (E,E)- 11 and (E,E)- 12 , respectively. In an alternative reaction, (E)- 8 , on treatment with dimethyl acetylenedicarboxylate (ADM) in the presence of [RuH₂(PPh₃)₄], can be transformed into the methoxycarbonyl-substituted bisacrylates (E,E)- and (E,Z)- 17 . All three bisacrylates, on heating at 180–190° in p-cymene, undergo cyclization to yield the corresponding dihydrobenz[a]azulenes 13 , 14 , and 18 , respectively, which could easily be dehydrogenated on heating in the presence of Pd/C. The new benz[a]azulenes 15 , 16 , and 19 are fully characterized.     

Studies on the Stereochemistry of 2-(Nitromethylidene)-Heterocycles

The ¹H-NMR spectra of 2-(nitromethylidene)pyrrolidine ( 7 ), 1-methyl-2-(nitromethylidene)imidazolidind ( 10 ) and 3-(nitromethylidene)tetrahydrothiazine ( 11 ) in CDCl₃ and (CD₃)₂SO indicate that these compounds have the intramolecularly H-bonded structures (Z)- 7 , (E)- 10 and (Z)- 11 while the N-methyl derivative 8 of 7 is (E)-configurated in both solvents. 1-Benzylamino-1-(methyltio)-2-nitroehtylene ( 13 ), an acylic model, has the H-bonded configuration (E)- 13 in CDCl₃ and in (CD₃)₂SO. 2-(Nitromethylidene)thiazolidine ( 3 ) has the (E)-configuration in CDCl₃ but exists in (CD₃)₂SO as a mixture of (Z)- and (E)-isomers with the former predominating. Both species are detected to varying proportions in a mixture of the two solvents. ¹⁵N-NMR spectroscopy of 3 ruled out unambiguously the nitronic acid structure 6 and the nitromethyleimine structure 5 . The N-methyl derivative 4 of 3 is (Z)-configurated in (CD₃)₂SO. Comparison of the olefinic proton shifts of (Z)- 3 and (Z)- 4 with those of analogues and also of 1,1-bis(methylti)-2-nitroethylene ( 12 ) shows decreased conjugation of the lone pair of electrons of the ring N-atom in (Z)- 3 and (Z)- 4 . This is also supported by ¹³C-NMR studies. Plausible explanations for the phenomenon are offered by postulating that the ring N-atoms are pyramidal in (Z)- 3 and (Z)- 4 and planar in other cases or, alternatively, that the conjugated nitroenamine system gets twisted due to steric interaction between the NO₂-group and the ring S-atom. Single-crystal X-ray studies of 3 and 8 show that the former exists in the (Z)-configuration and the latter in (E)-configuration; the ring N-atom in the former has slightly more pyramidal character than in the latter.     

Straightforward Preparation of (2E,4Z)-2,4-Heptadien-1-ol and (2E,4Z)-2,4-Heptadienal

Abstract

A concise synthesis of (2E,4Z)-2,4-heptadien-1-ol and (2E,4Z)-2,4-heptadienal is presented. Commercially available (Z)-2-penten-1-ol was converted to ethyl-(2E,4Z)-2,4-heptadienoate by reaction with activated MnO₂ and (carboethoxymethylene)triphenylphosphorane in the presence of benzoic acid as a catalyst. Ethyl-(2E,4Z)-2,4-heptadienoate was converted to (2E,4Z)-2,4-heptadien-1-ol with LiAlH₄. The alcohol was partially oxidized to (2E,4Z)-2,4-heptadienal with MnO₂. The title compounds are male-specific, antennally active volatile compounds from the Saltcedar leaf beetle, Diorhabda elongata Brulle (Coleoptera: Chrysomelidae) and have potential use in the biological control of the invasive weed saltcedar (Tamarix spp).     

Thermal and Ru-catalyzed Reactions of Styryl-Substituted Azulenes with Dimethyl Acetylenedicarboxylate

The thermal reaction of 1-[(E)-styrl]azulenes with dimethyl acetylenedicarboxylate (ADM) in decalin at 190–200° does not lead to the formation fo the corresponding heptalene-1,2-dicarboxylates (Scheme 2). Main products are the corresponding azulene-1,2-dicarboxylates (see 4 and 9 ), accompanied by the benzanellated azulenes trans- 10a and trans- 11 , respectively. The latter compounds are formed by a Diels-Alder reaction of the starting azulenes and ADM, followed by an ene reaction with ADM (cf. Scheme 3). The [RuH₂(PPh₃)₄]-catalyzed reaction of 4,6,8-trimethyl-1-[(E)-4-R-styryl]azulenes (R=H, MeO, Cl; Scheme 4) with ADM in MeCN at 110° yields again the azulene-1,2-dicarboxylates as main products. However, in this case, the corresponding heptalene-1,2-dicarboxylates are also formed in small amounts (3–5%; Scheme 4). The benzanellated azulenes trans- 10a and trans- 10b are also found in small amounts (2–3%) in the reaction mixture. ADM Addition products at C(3) of the azulene ring as well as at C(2) of the styryl moiety are also observed in minor amounts (1–3%). Similar results are obtained in the [RuH₂(PPh₃)₄]-catalyzed reaction of 3-[(E)-styryl]guaiazulene ((E)- 8 ; Scheme 5) with ADM in MeCN. However, in this case, no heptalene formation is observed, and the amount of the ADM-addition products at C(2) of the styryl group is remarkably increased (29%). That the substitutent pattern at the seven-membered ring of (E)- 8 is not responsible for the failure of heptalene formation is demonstrated by the Ru-catalyzed reaction of 7-isopropyl-4-methyl-1-[(E)-styryl]azulene ((E)- 23 ; Scheme 11) with ADM in MeCN, yielding the corresponding heptalene-1,2-dicarboxylate (E)- 26 (10%). Again, the main product is the corresponding azulene-1,2-dicarboxylate 25 (20%). Reaction of 4,6,8-trimethyl-2-[(E)-styryl]azulene ((E)- 27 ; Scheme 12) and ADM yields the heptalene-dicarboxylates (E)- 30A / B , purely thermally in decalin (28%) as well as Ru-catalyzed in MeCN (40%). Whereas only small amounts of the azulene-1,2-dicarboxylate 8 (1 and 5%, respectively) are formed, the corresponding benzanellated azulene trans- 29 ist found to be the second main product (21 and 10%, respectively) under both reaction conditions. The thermal reaction yields also the benzanellated azulene 28 which is not found in the catalyzed variant of the reaction. Heptalene-1,2-dicarboxylates are also formed from 4-[(E)-styryl]azulenes (e.g. (E)- 33 and (E)- 34 ; Scheme 14) and ADM at 180–190° in decalin and at 110° in MeCN by [RuH₂(PPh₃)₄] catalysis. The yields (30%) are much better in the catalyzed reaction. The formation of by-products (e.g. 39–41 ; Scheme 14) in small amounts (0.5–5%) in the Ru-catalyzed reactions allows to understand better the reactivity of zwitterions (e.g. 42 ) and their triyclic follow-up products (e.g. 43 ) built from azulenes and ADM (cf. Scheme 15).     

Experimental determination of the electron elastic backscattering probability and the surface excitation parameter for Si,Ni, Cu and Ag at 0.5 and 1 keV energies

Electron spectra are generally presented in arbitrary units. The experimental elastic peak intensity I_espec(E) is determined by the elastic backscattering probability I_e(E) of electrons backscattered elastically within the solid angle of the spectrometer. The experimental elastic peak I_espec(E) is converted to I_e(E) backscattering probability using our new procedure based on the Goto i_e(E) elastic backscattering current database. The elastic backscattering probability I_c(E) was calculated applying the EPESWIN software of Jablonski. I_e(E) < I_c(E) due to the surface losses of electrons, characterized by the surface excitation parameter P_se (SEP). P_se(E) was determined experimentally using the Goto database and the relationship of Tanuma. Our new procedure is applied to angular‐resolved (AREPES) spectra of Jablonski and Zemek presented in arbitrary units. In their AREPES experiments, the experimental elastic peak intensity I_espec = I_e(E, α_d, ΔΩ) was measured at α_d angle of detection (35–74°) with a small HSA, with ΔΩ solid angle. The experimental value at 42° $I_{e}(E, {\it{42}}\deg{\hbox{}}, {\Delta}\Omega)$ was converted to probability with the Goto database. It was corrected with a SEP parameter P_se, determined by trial and error method for Si, Ni, Cu and Ag for E = 0.5 and 1 keV primary energies. Copyright © 2010 John Wiley & Sons, Ltd.     

Film formation stages for poly(vinyl acetate) latex particles: a photon transmission study

Photon transmission technique was used to monitor the evolution of transparency during film formation from poly(vinyl acetate) (PVAc) latex particles. The latex films were prepared below the glass transition temperature (T _g) of PVAc. These films were annealed at elevated temperatures in various time intervals above the T _g of PVAc. It is observed that transmitted photon intensity (I _tr) from these films increased as the annealing temperature is increased. It is seen from I _tr curves that there are two film formation stages. These successive stages are named void closure (viscous flow) and interdiffusion. The activation energies for viscous flow (ΔH) and backbone motion (ΔE _b) were obtained by using well-defined models. The averaged values of the backbone (ΔE _b) and the viscous flow activation energies (ΔH) were found to be 188.6 and 5.6 kcal/mol, respectively. The minimum film formation (τ _M,T _M) and healing points (τ _H,T _H) were determined. Minimum film formation (ΔE _M) and healing activation energies (ΔE _H) were measured using these time–temperature pairs. ΔE _M and ΔE _H were found to be 32.5 and 28.3 kcal/mol, respectively.     

Thermodynamic characteristics of poly(cyclohexylethylene‐b‐ethylene‐co‐ethylethylene) block copolymers

A series of poly(cyclohexylethylene‐b‐ethylene‐co‐ethylethylene) (C‐E/E_E) diblock copolymers containing approximately 50% by volume glassy C blocks and varying fraction (x) of E_E repeat units, 0.07 ≤ x ≤ 0.90, was synthesized by anionic polymerization and catalytic hydrogenation. The effects of ethyl branch content on the melt state segment–segment (χ) interaction parameter and soft (E/E_E) block crystallinity were studied. The percent crystallinity ranged from approximately 30% at x = 0.07 to 0% at about x ≥ 0.30, while the melting temperature changed from 101 °C at x = 0.07 to 44 °C at x = 0.28. Dynamic mechanical spectroscopy was employed to determine the order–disorder transition (ODT) temperatures, from which χ was calculated assuming the mean‐field prediction (χN_n)_ODT = 10.5. Previously published results for the temperature dependent binary interaction parameters for C‐E (x = 0.07), C‐E_E (x = 0.90), and E‐E_E (x = 0.07 and x = 0.90) fail to account for the quantitative x dependence of χ, based on a simple binary interaction model. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 566–574, 2010     

一种经(E)-α-碘代烯基砜的钯催化交叉偶联反应立体选择合成(1Z,3E)-2-芳砜基取代的1,3-二烯的新方法

（E）-α-Stannylvinyl phenyl（or p-tolyl）sulfones underwent an iododestannylation reaction to afford （E）-α-iodovinyl phenyl（or p-tolyl）sulfones 1, which reacted with （E）-alkenylzirconium（IV） complexes 2 produced in situ by hydrozirconation of terminal alkynes in the presence of a Pd（PPh3）4 catalyst to afford stereoselectively （1Z,3E）-2- phenyl（or p-tolyl）sulfonyl-substituted 1,3-dienes 3 in good yields.     

Crystallization kinetics of chalcogenide glass Se0.8 Te0.2

The crystallization kinetics of the chalcogenide glass Se_0.8Te_0.2 was studied by means of differential scanning calorimetry. The variation in partial area (X) with temperature (T) revealed that the transition from the amorphous to the crystalline phase occurs in two dimensions.Activation energies were determined for both the glass transition (E _t) and the crystallization (E _c).E _t was calculated from the variation inT _g with the heating rate (a).E _c was determined by three different methods: (i) variation inX withT, (ii) variation inT _p witha, and (iii) variation inT _c witha.E _t andE _c have values of 161.01±2.75 and 84.75 ±8.21 kJ/mol, respectively.

---

Zusammenfassung Mittels DSC wurde die Kristallisierungskinetik des Chalkogenidglases Se_0.8Te_0.2 untersucht. Eine Änderung partieller Gebiete (X) mit der Temperatur (T) zeigte, daß der Übergang von der amorphen zur kristallinen Phase zweidimensional verläuft.Es wurde die Aktivierungsenergie sowohl für den Glasübergang (E _t) als auch für die Kristallisierung (E _c) bestimmt.E _t wurde mittels der Abhängigkeit vonT _g von der Aufheizgeschwindigkeit (a) ermittelt.E _c wurde auf drei verschiedene Wege bestimmt: (i) Änderung vonX in Abhängigkeit vonT, (ii) Änderung vonT _p in Abhängigkeit vona und (iii) Änderung vonT _c in Abhängigkeit vona. Die Werte vonE _t undE _c betragen 161.01±2.75 bzw. 84.75±8.21 kJ/mol.

---

---

This work was partly supported by a Grant-in-Aid for Scientific Research from the GTZ GmbH and DAAD, W. Germany.     

Stereocontrolled synthesis of (3Z,5E)-6-aryl-3-methylhexa-3,5-dien-1-ols,intermediates in the synthesis of strobilurin antibiotics

(2E,4E)-5-Aryl-2-(2-benzyloxyethyl)penta-2,4-dien-1-als (aryl is phenyl and 4-methox-yphenyl) were reduced with NaBH₄ quantitatively and stereospecifically to the corresponding penta-2(E),4(E)-dien-1-ols. The hydroxymethyl group in the latter was transformed into a methyl one with a stereoselectivity of 92–97%. Debenzylation of the resulting (1E,3Z)-1-aryl-6-benzyloxy-4-methylhexa-1,3-dienes with AlCl₃ in the presence of PhNMe₂ afforded the target (3Z,5E)-6-aryl-3-methylhexa-3,5-dien-1-ols; the configuration of the C=C bonds in the conjugated aryl diene systems was retained at 95%.     

Caulerpenyne-Amine Reacting System as a Model for in vivo Interactions of Ecotoxicologically Relevant Sesquiterpenoids of the mediterranean-adapted tropical green seaweed caulerpa taxifolia

Caulerpenyne ( 1 ), the most abundant of the ecotoxicologically relevant sesquiterpenoids of the Mediterranean-adapted tropical green seaweed Caulerpa taxifolia, was found to react with Et₃N or pyridine in MeOH by initial deprotection of C(1)HO to give oxytoxin 1 ( 2a ), previously isolated from the sacoglossan mollusc Oxynoe olivacea. With BuNH₂, without any precaution to exclude light, 1 gave the series of racemic 3 and 4 , and achiral (4E,6E)- 5 , (4E,6Z)- 5 , (4Z,6E)- 5 , and (4Z,6Z)- 5 pyrrole compounds, corresponding to formal C(4) substitution, 4,5-β-elimination, and (E/Z)-isomerization at the C(4)?C(5) and C(6)?C(7) bonds. Changing to CDCl₃ as solvent in the dark, 1 gave cleanly, via 2a as an intermediate, 3 and (4E,6E)- 5 . The latter proved to be prone to (E/Z)-photoisomerization. Under standard acetylation conditions, 3 gave (4E,6E)- 5 via acetamide 7 as an intermediate. Particular notice is warranted by selective deprotection of 1 at C(1), mimicking enzyme reactions, and unprecedented formation of pyrrole compounds from freely-rotating, protected 1,4-dialdehyde systems.