Voltammetric Method for the Simultaneous Determination of Melatonin and Pyridoxine in Dietary Supplements Using a Cathodically Pretreated Boron‐doped Diamond Electrode

The simultaneous voltammetric determination of melatonin (MT) and pyridoxine (PY) has been carried out at a cathodically pretreated boron‐doped diamond electrode. By using cyclic voltammetry, a separation of the oxidation peak potentials of both compounds present in mixture was about 0.47 V in Britton‐Robinson buffer, pH 2. The results obtained by square‐wave voltammetry allowed a method to be developed for determination of MT and PY simultaneously in the ranges 1–100 μg mL⁻¹ (4.3×10⁻⁶–4.3×10⁻⁴ mol L⁻¹) and 10–175 μg mL⁻¹ (4.9×10⁻⁵–8.5×10⁻⁴ mol L⁻¹), with detection limits of 0.14 μg mL⁻¹ (6.0×10⁻⁷ mol L⁻¹) and 1.35 μg mL⁻¹ (6.6×10⁻⁶ mol L⁻¹), respectively. The proposed method was successfully to the dietary supplements samples containing these compounds for health‐caring purposes.     

A new Approach for the Voltammetric Sensing of the Phytoestrogen Genistein at a Non-modified Boron-doped Diamond Electrode

An effective electrochemical sensor was constructed using an unmodified boron-doped diamond electrode for determination of genistein by square-wave voltammetry. Cyclic voltammetric investigations of genistein with HClO₄ solution indicated that irreversible behavior, adsorption-controlled and well-defined two oxidation peaks at about +0.92 (P_A1) & +1.27 V (P_A2). pH, as well as supporting electrolytes, are important in genistein oxidations. Quantification analyses of genistein were conducted using its two oxidation peaks. Using optimized experiments as well as instrumental conditions, the current response with genistein was proportionately linear in the concentrations range of 0.1 to 50.0 μg mL⁻¹ (3.7×10⁻⁷−1.9×10⁻⁴ mol L⁻¹), by the detection limit of 0.023 μg mL⁻¹ (8.5×10⁻⁸ mol L⁻¹) for P_A1 and 0.028 μg mL⁻¹ (1.1×10⁻⁷ mol L⁻¹) for P_A2 in 0.1 mol L⁻¹ HClO₄ solution (in the open circuit condition at 30 s accumulation time). Ultimately, the developed method was effectively applied to detect genistein in model human urine samples by using its second oxidation peak (P_A2).     

A New Voltammetric Approach for Electrochemical Determination of Lamotrigine in Pharmaceutical Samples

A new linear sweep voltammetric method for quantitative lamotrigine (LMT) determination based on an electrochemically pre-treated pencil graphite electrode (PGE*) is presented. Response characteristics of the PGE* toward the mentioned compound were investigated by cyclic voltammetry and linear sweep voltammetry. The quantitative determination of LMT revealed a wide linear range of 2.5 ⋅ 10⁻⁵–1.0 ⋅ 10⁻³ M with a detection limit of 1.94 ⋅ 10⁻⁵ M. The method was used successfully for LMT determination in a pharmaceutical formulation.     

Study on Cd2+ Determination Using Bud-like Poly-L-Tyrosine/Bi Composite Film Modified Glassy Carbon Electrode Combined with Eliminating of Cu2+ Interference by Electrodeposition

A bud-like poly-L-tyrosine/Bi modified glassy carbon electrode (p-Tyr/Bi/GC) was prepared by CV and in situ Bi plating, whose conductivity and membrane morphology were characterized by CV, EIS and SEM, respectively. The p-Tyr membrane can effectively promote the enrichment of Cd²⁺. The optimal Tyr concentration and scanning number for p-Tyr/GC preparation were 2.0 mmol ⋅ L⁻¹ and 35, while the optimal Bi³⁺ concentration, pH and Cd²⁺ accumulation potential in test medium were 3.0 μmol ⋅ L⁻¹, 6.5 and −1.3 V, respectively. The linear equation of p-Tyr/Bi/GC's response to Cd²⁺ (1.0 nmol ⋅ L⁻¹ to 2.0 μmol ⋅ L⁻¹) was i_p (μA) = −0.6809 + 100.2c (μmol ⋅ L⁻¹) (R² = 0.9985) with a detection limit of 0.11 nmol ⋅ L⁻¹ (3S/N). The elimination of interference caused by Cu²⁺ in sample was studied by electrodeposition. The p-Tyr/Bi/GC electrode was successfully used for detecting Cd in rice samples with good reliability and accuracy. The developed Cd²⁺ sensor exhibits high sensitivity, wide linear range and low detection limit, especially the designed method of eliminating Cu²⁺ interference has the characteristics of high selectivity, simple operation and wide application range.     

Determination of Cu2+ in Drinking Water Based on Electrochemiluminescence of Ru(phen)32+ and Cyclam

A convenient and simple electrochemiluminescence (ECL) method was employed to detect trace amounts of Cu²⁺ in drinking water. This method is based on the inhibitory effect of Cu²⁺ on the ECL of Ru(phen)₃²⁺ and 1,4,8,11‐tetraazacyclotetradecane (cyclam) system. ECL intensity of Ru(phen)₃²⁺ was considerably enhanced by the addition of cyclam because of the ECL reaction between them. The ECL intensity of Ru(phen)₃²⁺/cyclam system rapidy decreased with the addition Cu²⁺ because of the formation of chelate complex [Cu(cyclam)]²⁺. Good linear response (R ²=0.9948) was obtained at Cu²⁺ concentration of 1.0×10⁻⁹−1.0×10⁻⁵ mol ⋅ L⁻¹ at glassy carbon electrode in 0.1 mol ⋅ L⁻¹ phosphate buffer (pH 9.0). Observed detection limit of 4.8×10⁻¹⁰ mol ⋅ L⁻¹ satisfied the maximum contaminant level goal (MCLG) for Cu²⁺ set by the US Environmental Protection Agency (US EPA). Applicability of the proposed method was verified by the good reproducibility and stability of the method when applied to determine Cu²⁺ in tap water and simulated wastewater. Thus, a novel ECL detection method was developed for Cu²⁺ detection.     

Simultaneous Determination of Lipophilic Vitamin Esters Using Square-wave Voltammetry at the Glassy Carbon Electrode

Simple and rapid voltammetric method for simultaneous determination of all-trans-retinyl acetate (RAc) or all-trans-retinyl palmitate (RPa) and α-tocopheryl acetate (α-TOAc) has been proposed. The respective method was based on the anodic oxidation of the compounds of interest by square-wave voltammetry in acetone with 0.1 mol L⁻¹ LiClO₄ at the glassy carbon electrode. The procedure was also beneficial with respect to simple dissolution of sample directly in the supporting electrolyte. The all-trans-retinyl acetate could be quantified in two linear ranges (3.1–140 μmol L⁻¹ and 140–400 μmol L⁻¹) and α-tocopheryl acetate in linear range 5.3–400 μmol L⁻¹ with detection limits of 0.9 μmol L⁻¹ RAc (or 0.8 μmol L⁻¹ RPa) and of 1.6 μmol L⁻¹ α-TOAc. Selected commercial cosmetic products were analysed achieving satisfactory recoveries.     

Voltammetry of a Novel Antimycobacterial Agent 1‐Hydroxy‐N‐(4‐nitrophenyl)naphthalene‐2‐carboxamide in a Single Drop of a Solution

The aim of this study is the development of a miniaturized voltammetric method for the determination of an antimycobacterial agent 1‐hydroxy‐N‐(4‐nitrophenyl)naphthalene‐2‐carboxamide (HNN) in a single drop (20 μL) of a solution by cathodic and anodic voltammetry at a glassy carbon electrode. Cyclic voltammetry was used to investigate its redox properties followed by the optimization of differential pulse voltammetric determination in a regular 10 mL volume. The optimal medium for the analytical application of both cathodic and anodic voltammetry was found to be Britton‐Robinson buffer pH 7.0 and dimethyl sulfoxide (9 : 1, v/v). HNN gave one cathodic peak at around −0.6 V and one anodic peak at around +0.2 V vs. Ag|AgCl (3 mol L⁻¹ KCl) reference electrode. Determination of HNN in a 10 mL volume gave the limit of quantification around 10 nmol L⁻¹ by both adsorptive stripping anodic and cathodic voltammetry. Afterwards, miniaturized voltammetric methods in a single drop of solution (20 μL) were investigated. This approach requested some modifications of the cell design and voltammetric procedures. A novel method of removing dissolved oxygen in a single drop had to be developed and tested. Developed miniaturized voltammetric methods gave parameters comparable to the determination of HNN in 10 mL. The applicability of the miniaturized method was verified by the determination of HNN in a drop of a bacterial growth medium.     

Electrochemical Oxidation of Ibuprofen and Its Voltammetric Determination at a Boron‐Doped Diamond Electrode

The electrochemical oxidation of ibuprofen at a boron‐doped diamond electrode (BDDE) and its voltammetric determination is reported for the first time. A well‐defined oxidation peak was observed at around 1.6 V in 0.1 mol L^?1 H₂SO₄ solution with 10 % (v/v) ethanol at the BDDE surface activated by either cathodic or anodic pretreatments. A differential‐pulse voltammetric method for the determination of ibuprofen in pharmaceutical formulations was optimized with a detection limit of 5 µmol L^?1 and compared with the British Pharmacopeia method.     

Amperometric detection of indapamide on glassy carbon electrode

This work describes the development of a fast, precise and reliable voltammetric method for the quantification of indapamide, an orally active diuretic sulfonamide used for hypertensive treatment. This compound acts inhibiting sodium reabsorption and increasing the elimination of water. This characteristic was responsible for its banishment by the International Olympic Committee since 1999. The study begins by finding an adequate potential range (−0.20 to 0.30 V) to avoid poisoning the working glassy carbon electrode (GCE) in phosphate buffer 0.10 mol L⁻¹ (pH=12.0). Utilizing flow injection analysis, linear responses between 2.0 × 10⁻⁶ mol L⁻¹ to 2.5 × 10⁻⁵ mol L⁻¹ of indapamide (R²=0.995), and detection limit (LOD) 3.0 × 10⁻⁷ mol L⁻¹ were obtained. This method was applied for the quantification of indapamide in tablets and in synthetic urine. The same flow system was used for the analysis of commercial drugs and the response obtained corresponded to 98 % of the concentration indicated on the drug label. These tablets were also analyzed by high performance liquid chromatography (HPLC), obtaining a recovery of 103 % and LOD 4.0 × 10⁻⁷ mol L⁻¹. The velocity of analysis using flow methods compares advantageously to the classical chromatographic methods. For synthetic urine, linear responses were obtained in samples spiked in the region from 5.0 × 10⁻⁶ mol L⁻¹ to 30 × 10⁻⁶ mol L⁻¹ (R²=0.991) and LOD 3.0 × 10⁻⁷ mol L⁻¹.     

Square‐Wave Voltammetric Determination of Paraquat at Carbon Paste Electrode Modified with Hydroxyapatite

The voltammetric behavior of paraquat was investigated at hydroxyapatite‐modified carbon paste electrode HAP‐CPE in K₂SO₄. A method was developed for the detection of the trace of this herbicide, based on their redox reaction. The reduction peaks of paraquat were observed around ?0.70 V and ?1.00 V (vs. SCE) in square‐wave voltammetry. Experimental conditions were optimized by varying the accumulation time, apatite loading and measuring solution pH. Calibration plots were linear under the optimized parameters over the herbicide's concentration range 8–200×10^?7 mol L^?1, with a detection and quantification limits about 1.5×10^?8 mol L^?1 and 6.4 10^?8 mol L^?1, respectively.     

A Simple Method for Melatonin Determination in the Presence of High Levels of Tryptophan using an Unmodified Carbon Paste Electrode and Square Wave Anodic Stripping Voltammetry

Electrochemical determination of melatonin in the presence of tryptophan is a challenge because of the coincidence of voltammetric signals of these compounds when executing a voltammetric technique. The new method for selective determination of melatonin based on the square wave anodic stripping voltammetry determination of an electroactive product of melatonin was suggested here. This product is produced by previously applied positive pre-potential to a carbon paste electrode, immersed in the test solution. By this means, the electrochemical signal of melatonin was separated effectively from that of tryptophan, making it possible to determine melatonin in the presence of a high concentration of tryptophan. The effect of important parameters on electrode performance was studied and optimized. The optimum response was obtained at pH=2 and utilizing the pre-potential magnitude of +0.8 V, applied for 10 s. A linear relationship was found between peak current intensity and melatonin concentrations over the range of 5.00×10⁻⁷ to 8.00×10⁻⁵ mol L⁻¹. A detection limit of 8.30×10⁻⁸ mol L⁻¹ was calculated for the method (S/N=3). The selectivity of the method was considerably high, because of the independence of melatonin signal to the presence of higher amounts of some potentially interfering agents such as ascorbic acid, tryptophane glucose, etc. As an analytical application, the proposed sensor was used for the determination of melatonin in pharmaceutical and food samples.     

A sensitive DNA biosensor based on the distance dependent quenching of Silica@Ru(bpy)32+-chitosan-GO electrochemiluminescence by Ferrocene@Gold nanoparticles

A sensitive electrochemiluminescence (ECL) biosensor for the specific DNA sequence of hepatitis C virus (HCV) was developed based on the efficient quenching effect of the ferrocene cluster functionalized gold nanoparticles (Fc@AuNPs) on the ECL of electrodeposited silica@Ru(bpy)₃²⁺-chitosan-graphene oxide nanocomposite (SiO₂@Ru−CS−GO). Graphene oxide (GO) can accelerate electron transfer rate, thus improving the ECL of Ru(bpy)₃²⁺ on electrode surface. The molecular beacons (MB) was fixed to SiO₂@Ru−CS−GO by glutaraldehyde (GA) using the Schiff reaction between amino groups of chitosan (CS) and MB. The ECL of SiO₂@Ru−CS−GO was depressed greatly by the Fc@AuNPs labelled at the end of MB, then, a stronger ECL was observed when the distance between Fc@AuNPs and SiO₂@Ru−CS−GO increased after the hybridization of target DNA with MB. Under optimum conditions, the restored ECL intensity increased linearly with the target DNA concentration in the range of 1.0×10⁻¹⁶∼1.0×10⁻¹⁰ mol ⋅ L⁻¹, and the limit of detection (LOD) is 1.4×10⁻¹⁷ mol ⋅ L⁻¹. The proposed method exhibits acceptable stability and reproducibility. In general, the constructed HCV biosensor can be used for the sensitive detection of HCV in human serum, suggesting potential application prospects in bioanalysis.     

A Novel Method of High Sensitive Determination of Prednisolone on Renewable Mercury Film Silver Based Electrode

Fast and sensitive method of prednisolone determination at renewable mercury film electrode using differential pulse adsorptive stripping voltammetry (DPAdSV) was successfully developed. The effects of various factors such as: preconcentration potential and time, pulse height, step potential and supporting electrolyte composition were optimized. A linear voltammetric response for analyte was obtained in the concentration range from 0.05 µmol L⁻¹ (18 µg L⁻¹) to 2.25 µmol L⁻¹ (0.81 mg L⁻¹), with a detection limit of 0.01 µmol L⁻¹ for preconcentration time of 20 s. Repeatability of method was determined as RSD % for prednisolone concentration of 0.04 µmol L⁻¹ as 1.6 % (n=9). The proposed method was successfully applied and validated by recovery parameter of prednisolone in simulated sample and pharmaceutical product.     

Multi‐responses Methodology Applied in the Electroanalytical Determination of Hair Dye by Using Printed Carbon Electrode Modified with Graphene

This paper describes a rapid and sensitive method for determination of the hair dye Basic Blue 41 in wastewater samples using screen‐printed carbon electrodes modified with graphene (SPCE/Gr). The method is based on the reversible reduction of azo groups of the dye at potential of ?0.23 V/?0.26 V, where both the anodic and cathodic currents increased 1,300 % when compared to screen‐printed carbon (SPCE) and glassy carbon electrodes (GCE). The optimization of a square wave voltammetric method was performed by means of 2³ factorial design, Doehlert matrix and multi‐response assays, and the best parameters were: frequency (54.8 Hz), step potential (6 mV), pulse amplitude (43.7 mV) and pH 4.5. The analytical curve was constructed from 3.00×10^?8 to 2.01×10^?6 mol L^?1, with detection and quantification limits of 5.00×10^?9 and 1.70×10^?8 mol L^?1, respectively. The repeatability of the method evaluated for 10 consecutive measurements at concentrations of 1.70×10^?7 mol L^?1 and 1.70×10^?6 mol L^?1, showed relative standard deviation of 3.56 and 0.57 %, respectively. The sensor based in SPCE/Gr was successfully applied in wastewater samples collected from a drinking water treatment plant and validated by comparison with HPLC‐DAD method with good accuracy.     

Electrochemical Sensor for Selective Detection of Meldonium in Urine by Voltammetry

A highly sensitive electrochemical sensor based on arenediazonium tosylates was designed to detect meldonium in urine. The effect of the concentration of ArN2⁺OTs⁻ arenediazonium tosylate modifier and various substituents was studied. Basic operating parameters for voltammetric meldonium detection were established and the procedure for urine sample preparation was developed. The following values were obtained: limit of detection (LOD) 0.005 mg ⋅ L⁻¹ (P=0.95) and limit of quantification (LOQ) 0.01 mg ⋅ L⁻¹. The relationship between the analytical signal and meldonium concentration in the solution ranging from 0.01 to 400 mg ⋅ L⁻¹ was described by a linear function. The meldonium concentration error did not exceed 18 %. The analysis time for a single urine sample was reduced to 15 minutes.     

Selective Determination of Verapamil in Pharmaceutics and Urine Using a Boron‐doped Diamond Electrode Coupled to Flow Injection Analysis with Multiple‐pulse Amperometric Detection

This work presents a simple and low‐cost method for fast and selective determination of Verapamil (VP) in tablets and human urine samples using a boron‐doped diamond working electrode (BDD) coupled to a flow injection analysis system with multiple pulse amperometric detection (FIA‐MPA). The electrochemical behaviour of VP in 0.1 mol L⁻¹ sulfuric acid showed three merged oxidation peaks at around +1.4 V and upon reverse scan, one reduction peak at 0.0 V (vs. Ag/AgCl). The MPA detection was performed applying a sequence of three potential pulses on BDD electrode: (1) at +1.6 V for VP oxidation, (2) at +0.2 V for reduction of the oxidized product and (3) at +0.1 V for cleaning of the working electrode surface. The FIA system was optimized with injection volume of 150 μL and flow rate of 3.5 mL min⁻¹. The method showed a linear range from 0.8 to 40.0 μmol L⁻¹ (R>0.99) with a low limit of detection of 0.16 μmol L⁻¹, good repeatability (RSD<2.2 %; n=10) and sample throughput (45 h⁻¹). Selective determination of VP in urine was performed at+0.2 V due to absence of interference from ascorbic and uric acids in this potential. The addition‐recovery tests in both samples were close to 100 % and the results were similar to an official method.     

Determination of Creatinine in Urine by Voltammetry and Glassy Carbon Electrode Modified with Functionalized Multi-walled Carbon Nanotubes and Copper

A square-wave voltammetric method was developed for the determination of creatinine using glassy carbon electrode functionalized multi-walled carbon nanotubes and doped with copper. Since the creatine-creatinine balance is dependent on pH, the linear responses at either pH 4.0 or 7.0 were evaluated allowing versatility in application, covering analyte concentration from limit of quantification (0.3 μmol L⁻¹) up to 1.200 μmol L⁻¹ (pH 4) or 660 μmol L⁻¹ (pH 7). Electrode is simple to prepare and robust for routine analysis and it was used for the determination of creatinine in urine after simple thin-layer separation procedure to avoid interference from creatine.     

Sensitive Determination of the Diquat Herbicide in Fresh Food Samples on a Highly Boron‐Doped Diamond Electrode

The highly boron‐doped diamond electrode (HBDD) combined with square wave voltammetry (SWV) was used in the development of an analytical procedure for diquat determination in potato and sugar cane samples and lemon, orange, tangerine and pineapple juices. Preliminary experiments realised in a medium of 0.05 mol L^?1 Na₂B₄O₇ showed the presence of two voltammetric peaks around ?0.6 V and around ?1.0 V vs. Ag/AgCl/Cl^? 3.0 mol L^?1, where the first peak could be successfully used for analytical proposes due the facility in the electrode surface renovation. After the experimental and voltammetric optimisation, the calculated detection and quantification limits were 1.6×10^?10 mol L^?1 and 5.3×10^?10 mol L^?1 (0.057 µg L^?1 and 0.192 µg L^?1, respectively), which are lower than the maximum residue limit established for fresh food samples by the Brazilian Sanitary Vigilance Agency. The proposed methodology was used to determine diquat residues in potato and sugar cane samples and lemon, orange, tangerine and pineapple juices and the calculated recovery efficiencies indicated that the proposed procedure presents higher robustness, stability and sensitivity, good reproducibility, and is very adequate for diquat determination in complex samples.     

Cathodic Adsorptive Voltammetry of the Gallium‐Alizarin Red S Complex at a Carbon Paste Electrode

The adsorptive voltammetric behavior of the gallium‐alizarin red S (ARS) complex in NH₄OAc‐HCl buffer at a carbon paste electrode(CPE) was investigated. The results showed that the complex can be adsorbed on the surface of the CPE, yielding one reduction peak at ?0.52 V(vs. SCE), corresponding to the irreversible reduction of the ligand, ARS, bonded in the complex. The optimal experimental conditions include the use of 0.10 mol L^?1 ammonium acetate buffer(pH 4.5), 1.0×10^?5 mol L^?1 ARS, an accumulation potential of ?0.05 V, an accumulation time of 180 s ,a rest time of 10 s, a scan rate of 200 mV s^?1and a second‐order derivative linear scan mode. The peak current is proportional to the concentration of gallium(III) over the range 0.02–6.0 μg L^?1, with the detection limit of 0.01 μg L^?1 for an accumulation time of 180 s. The method was applied to the determination of gallium in food samples with satisfactory results.     

Voltammetric Determination of Proguanil in Malarone and Spiked Urine with a Renewable Silver Amalgam Film Electrode

Electrochemical properties of proguanil were investigated by a voltammetric method (SWV) using a renewable silver amalgam film electrode. The influence of buffer pH as well as potential amplitude, frequency, and step potential was studied. The repeatability, precision and recovery of the developed method were examined. The reduction peak current was used for proguanil voltammetric determination in the range 1×10^?7–6×10^?6 mol L^?1, LOD=2.9×10^?8 mol L^?1, LOQ=9.7×10^?8 mol L^?1. The standard addition method was used to determine proguanil in a commercial formulation (Malarone) and in spiked urine.